Análise faciológica e estratigráfica da planície costeira de Soure (margem leste da ilha de Marajó-PA), no trecho compreendido entre o canal do Cajuúna e o estuário Paracauari

A planície costeira de Soure, na margem leste da ilha de Marajó (Pará), é constituída por áreas de acumulação lamosa e arenosa, de baixo gradiente, sujeitas a processos gerados por marés e ondas. Suas feições morfológicas são caracterizadas por planícies de maré, estuários, canais de maré e praias-barreiras. A análise faciológica e estratigráfica de seis testemunhos a vibração, com profundidade média de 4 m, e de afloramentos de campo permitiu a caracterização dos ambientes deposicionais, sua sucessão temporal e sua correlação lateral, a elaboração de seções estratigráficas e a definição de uma coluna estratigráfica. Foram identificadas cinco associações de facies: (1) facies de planície de maré, (2) facies de manguezal, (3) facies de barra de canal de maré, (4) facies de praia e (5) facies de duna. A história sedimentar da planície costeira de Soure é representada por duas sucessões estratigráficas: (1) a sucessão progradacional, constituída pelas associações de facies de planície de maré, manguezal e barra de canal de maré; e (2) a sucessão retrogradacional, formada pelas associações de facies de praia e de duna. Essas sucessões retratam uma fase de expansão das planícies de maré e manguezais, com progradação da linha de costa (Holoceno médio a superior), e uma posterior fase de retrogradação, com migração dos ambientes de praias e dunas sobre depósitos lamosos de manguezal e planície de maré, no Holoceno atual. A história deposicional da planície costeira de Soure é condizente com o modelo de evolução holocênica das planícies costeiras do nordeste paraense.

Morfoestratigrafia do noroeste da planície costeira de São João de Pirabas (Nordeste do Pará)

Na Planície Costeira de São João de Pirabas (NE do Pará), ocorrem principalmente depósitos terciários e quaternários, cuja distribuição e espessura foram influenciadas por movimentos neotectônicos e oscilações do nível do mar atuantes desde o Mioceno. A análise estratigráfica com base em testemunhos (com até 6 m de comprimento), permitiu a identificação de um padrão de sedimentação, visualizado através de quatro sucessões marinhas: sucessão marinha retrogradacional basal - SB (lamas de intermaré, areias de antigos cordões praiais e areias de canais de maré); sucessão marinha retrogradacional - S1 (sedimentos predominantemente arenosos de face praial); sucessão progradacional - S2 (ambiente de planície de maré e "chêniers" associados) e; sucessão retrogradacional atual - S3 (cordões duna-praia, barras arenosas longitudinais e de baías, que migram sobre os manguezais). A evolução desta planície está relacionada às oscilações do nível do mar que, inicialmente, deram origem a sucessão Retrogradacional Basal (SB), durante uma fase transgressiva relacionada ao Pleistoceno Terminal (?), enquanto as sucessões S1, S2 e S3 teriam evoluído a partir da atuação de ciclos transgressivos e regressivos, desde aproximadamente 5.100 anos A.P até os dias atuais.

Depósitos pleistocenos da formação Itaubal: paleoambiente e implicações na evolução da planície costeira do Amapá

A costa norte da América do Sul durante o Pleistoceno tardio esteve sujeita a oscilações do nível do mar, relacionadas a variações climáticas e influência da dinâmica de sedimentos carreados pelo Rio Amazonas, que moldaram a paisagem desta região. Terraços Pleistocenos da Formação Itaubal, anteriormente considerados como pertencentes à Formação Barreiras (Mioceno), constituem parte da Planície Costeira do Amapá e recobrem rochas do Escudo das Guianas. A integração das análises de fácies, estratigráfica e datações por Luminescência Opticamente Estimulada / regeneração de alíquota única e múltipla (LOE / SAR-MAR) entre 120.600 (± 12.000) e 23.150 (±6.800) anos AP permitiu o posicionamento da Formação Itaubal no Pleistoceno Superior. Estes depósitos siliciclásticos, de espessura máxima de 10 m, cor amarronzada a avermelhada com camadas de geometria tabular foram divididos em duas unidades separadas por inconformidade. A Unidade Inferior compreende as associações de fácies, de planície de inframaré (AF1) e de canal fluvial meandrante influenciado por maré (AF2), enquanto que a Unidade Superior, com maior concentração de argila que a Unidade Inferior, consiste em depósitos de planície de maré (AF3) e de canal fluvial entrelaçado (AF4). As duas unidades têm caracteristicas progradacionais dentro de trato de sistema de mar alto e regressivo, e foram depositadas diretamente sobre rochas do embasamento intensamente intemperizadas durante o Mioceno-Pleistoceno. Os depósitos da Formação Itaubal foram expostos durante o Último Máximo Glacial (22.000 - 18.000 anos AP) e posteriormente sobrepostos por depósitos finos do Rio Amazonas, que configuram a atual linha de costa da Costa norte da América do Sul. Pela primeira vez a Formação Itaubal define os eventos sedimentares do Pleistoceno na evolução da Planície Costeira do Amapá. A correlação de seus depósitos com os de Suriname e nordeste do Pará amplia a discussão sobre a configuração da linha de costa do norte da América do Sul desde o Pleistoceno.

Foraminíferos como indicadores paleoecológicos do Holoceno no Manguezal de Guaratiba, Baía de Sepetiba, Rio de Janeiro

Os manguezais são ecossistemas estuarinos, representando a transição entre os ambientes continentais e marinhos, e tendo sua formação relacionada com as flutuações do nível do mar no Quaternário. No Manguezal de Guaratiba, diversos estudos sobre as variações do nível do mar, mais precisamente no Holoceno, têm sido realizados, sob os enfoques sedimentológicos, geoquímicos, palinológicos e micropaleontológicos. Entre os estudos micropaleontológicos, destacam-se os que utilizam os foraminíferos bentônicos, micro-organismos amplamente utilizados como indicadores paleoecológicos e paleoambientais do Holoceno. No presente trabalho, foi coletado, através de um amostrador do tipo trado russo, um testemunho (T1) no Manguezal de Guaratiba, no qual foram realizadas análises de parâmetros como granulometria, teores de matéria orgânica (MO), carbonato, carbono orgânico total (COT) e enxofre (S) (abióticos) e da fauna de foraminíferos bentônicos (bióticos). Foram utilizadas também índices ecológicos e análises de agrupamento, através das quais foi possível estabelecer quatro associações faunísticas (I,II,III e IV), assim como os fatores ambientais que mais influenciaram a distribuição da fauna. A correlação com assembleias de foraminíferos de outros testemunhos que possuem datação por Carbono 14 (C14), assim como outros trabalhos que versam sobre a evolução da Baía de Sepetiba, permitiu o estabelecimento de três ciclos de emersão-submersão para a área da planície de maré estudada: 1)Fase transgressiva: nível de concentração de conchas em depósitos lagunares formados por sedimentos finos, sem foraminíferos; provavelmente posterior a uma regressão; 2) Fase transgressiva: formação de uma baía, com presença exclusiva de espécies de foraminíferos calcários (Associação III) com maiores valores de riqueza e queda nos valores de COT; ocorrida há cerca de 3.800 anos A.P 3) Fase transgressiva: período de submersão, presença de espécies de foraminíferos tipicamente estuarinos (Associação IV), com duração entre 3.500 anos A.P. e 2.700 anos A.P.; 4)Fase transgressiva: caracterizada pela alternância entre a formação de baías rasas e lagunas marinhas (maiores índices de riqueza nas associações faunísticas), menores valores de MO e COT e aumento na proporção de sedimentos finos; evento iniciado há cerca de 2.700 anos A.P.; e 5)Fase regressiva: fauna de foraminíferos aglutinantes, resistente às condições de salinidade e acidez características de ambientes confinados como os manguezais, além do incremento nos teores de areia, evidenciando a fase final de confinamento da Baía de Sepetiba pela Restinga da Marambaia; evento iniciado por volta de 2.400 anos A.P., estendendo-se até o presente. Os resultados obtidos mostram a importância da correlação lateral entre testemunhos na interpretação paleoambiental da Baía de Sepetiba, além da identificação de estágios de transgressão e regressão que se aproximam da curva de variação do nível do mar proposta por SUGUIO et al.(1985) para o litoral do Estado do Rio de Janeiro

Evolução morfodinâmica da região de influência estuarina do Rio Curimataú/RN, com ênfase nas alternativas do ambiente deposicional de manguezal e a integração de geodados em Sig

The estuaries are important investigation zones of the actual morphodynamic and of depositional facies of recent geological history. They are constituted in important receptor means of the coastal area sediments, where the evolutionary processes occur quickly. They are also attractive means for the development of anthropic activities, which in a disordered way interfere in the active processes in the sedimentary balance of the coastal areas. Among the human interventions, the alterations of the depositional environment of mangroves in areas of tropical estuary is deserving relevance, whose implications for the environment estuarine and the coastal adjacent, they are still far to be known. Due to the interest of the sedimentologic component in the comprehension of the processes linked to the evolution of the environments estuarine and coastal adjacent, this work, aimed at the understanding of the morphodynamic coastal phenomena that comprise the region of estuarine influence of the River Curimataú / RN. It was also evaluated in the morphodynamic context the implications due to alterations of the depositional environment of mangrove by anthropic activity. The Curimataú Estuary, located in the south portion of the oriental coast of Rio Grande do Norte, in the last decades has been objective of the overwhelming occupation of the shrimp farm in areas of mangroves, which were implanted with perspectives of development in a short to medium period. On the other hand, the estuary and its region of coastal influence lacks enough information to subsidize the planning and reorganization more effective of the surrounding activities. Thus, it was intended with this work to give a contribution target tothe maintainable use of the coastal resources of this region. A series of studies using data of orbital and acoustic remote sensing, as of sediments sampling, were executed in the gutter of the estuary. The obtained results starting from the interpretation of bathymetric maps, echo sounder graphics and of distribution of sediments made possible the location of the estuary based in morpho-sedimentar criteria. The estuarine tidal flat was dissected in environments of intertidal mangroves, supratidal mangroves and apicuns with base in the integration of data of sensor optic and of radar following by the field control. The adjacent coast that is influenced by the Curimataú estuary, was segmented according to their geomorphologic characteristics, where each segment had a point of observation of the beach morphodynamic, during the period from january/2001 to february/2002. Once every month, beaches profiles, collections of sediments in the beach zones, as measurement of hydrodynamic parameters were executed. The results of the observations of the tidal environment showed that the area of estuarine influence of the Curimataú begins to suffer negative sedimentary taxes, where in some beaches, the erosive processes are already observed. The granulometric characteristics of the beach sediments start to tend for the increase of thin sand in the erosive periods. The destruction of the depositional environments of mangroves of the Curimataú estuary, to the construction of shrimp farms, can be providing the diminution of the tidal prism of the estuary, enlarging the effects of the local increasing of the sea level, through the smaller supplying of sediments to the adjacent coast. Besides this, it was verified the possibility of the sanding of the tidal channel in the margins of the destroyed areas of mangroves, where very high taxes of sedimentation of thin materials were estimated in case of these areas were preserve

Proposta metodológica para o imageamento, caracterização, parametrização e geração de modelos virtuais de afloramentos

The aim of this work was to describe the methodological procedures that were mandatory to develop a 3D digital imaging of the external and internal geometry of the analogue outcrops from reservoirs and to build a Virtual Outcrop Model (VOM). The imaging process of the external geometry was acquired by using the Laser Scanner, the Geodesic GPS and the Total Station procedures. On the other hand, the imaging of the internal geometry was evaluated by GPR (Ground Penetrating Radar).The produced VOMs were adapted with much more detailed data with addition of the geological data and the gamma ray and permeability profiles. As a model for the use of the methodological procedures used on this work, the adapted VOM, two outcrops, located at the east part of the Parnaiba Basin, were selected. On the first one, rocks from the aeolian deposit of the Piaui Formation (Neo-carboniferous) and tidal flat deposits from the Pedra de Fogo Formation (Permian), which arises in a large outcrops located between Floriano and Teresina (Piauí), are present. The second area, located at the National Park of Sete Cidades, also at the Piauí, presents rocks from the Cabeças Formation deposited in fluvial-deltaic systems during the Late Devonian. From the data of the adapted VOMs it was possible to identify lines, surfaces and 3D geometry, and therefore, quantify the geometry of interest. Among the found parameterization values, a table containing the thickness and width, obtained in canal and lobes deposits at the outcrop Paredão and Biblioteca were the more relevant ones. In fact, this table can be used as an input for stochastic simulation of reservoirs. An example of the direct use of such table and their predicted radargrams was the identification of the bounding surface at the aeolian sites from the Piauí Formation. In spite of such radargrams supply only bi-dimensional data, the acquired lines followed of a mesh profile were used to add a third dimension to the imaging of the internal geometry. This phenomenon appears to be valid for all studied outcrops. As a conclusion, the tool here presented can became a new methodology in which the advantages of the digital imaging acquired from the Laser Scanner (precision, accuracy and speed of acquisition) were combined with the Total Station procedure (precision) using the classical digital photomosaic technique

Monitoramento geoambiental do estuário do Rio Paraíba do Norte - PB por meio da cartografia temática digital e de produtos de sensoriamento remoto

The North Paraíba River Estuary, located in the eastern portion of the Paraíba State, Northeast Brazil, on coordinates 34º50 00 -34º57 30 S and 6º55 00 -7º7 30 W, constitutes a fluvio-marine plain formed by the North Paraíba River and its tributaries Sanhauá, Paroeira, Mandacaru, Tiriri, Tambiá, Ribeira and Guia. This estuary comprises an area of about 260 km2. Increasing human demands on the estuary area and inadequate environment managing have generated conflicts. The present work main purpose is to evaluate the geodynamic evolution of the North Paraíba River Estuary in the period from 1969 to 2001, using digital image processing techniques, thematic digital cartography and multitemporal data integration, combined to geological-geophysical field surveys. The SUDENE cartographic database, converted to digital format were, used to obtain occupation and topographic maps from 1969 and to generate a Digital Elevation Model (DEM). Digital Landsat 7 ETM+ and Spot HRVIR-PAN satellite images interpretation allowed the environmental characterization of the estuary. The most important digital processing results were achieved color composites RGB 5-4-3, 5-3-1, 5-2-NDWI and band ratio 7/4-5/3-4/2, 5/7-3/1-5/4). In addition the fusion image technique RGBI was used by the inclusion of the Spot HRVRI and Landsat 7 ETM+ panchromatic band on I layer with RGB triplets 5-4-3, 5-3-1 and 5/7-3/1-5/4. The DEM and digital images integration allowed the identification of seven geomorphological units: coastal tableland, flowing tray, tide plain, fluvial terrace, submerged dune, beach plain and beach). Both Side Scan Sonar and Echosound were used to analyse underwater surface and bedforms of the estuarine channel, sand predominance (fine to very fine) and 2D dune features 5 m wide and 0.5 m height. This investigation characterized the estuary as an environment dominated by regimen of average flow. The channel depth varies between 1 m and 11 m, being this last quota reached in the area of Porto de Cabedelo. The chanel estuary is relatively shallow, with erosion evidences mainly on its superior portion, attested by sand banks exposed during the low tide. Multitemporal digital maps from 1969 and 2001 integration were obtained through geoprocessing techniques, resulting the geodynamic evolution of the estuary based on landuse, DEM geomorphology and bathymetric maps

Estudo geológico e geofísico da falha de carnaubais, Bacia Potiguar-RN, e implicações neotectônicas

The segment of Carnaubais Fault located in the southeasthern portion of Guamaré Graben (Potiguar Basin) was studied. Several structures were detected and some of them strongly suggest that the last movements in Carnaubais Fault are of Neotectonic age. The study comprises an integrated interpretation of geologic, geomorphologic and geophysical data (gravimetry, magnetometry, resistivity, and self potential methods). According to the size of the studied areas, two approaches were used in this research. The first approach is of a regional nature and was conducted in an area, hereafter named Regional Area, having approximately 6,000 km2 and localized in the northern portion of Rio Grande do Norte state, around Macau city. The second approach comprises detailled studies of two small areas inside the Regional Area: the Camurupim and São Bento areas. Gravimetric and topographic data were used in the Regional Area. A separation into regional and residual components were conducted both on gravimetric and topographic data. The interpretation of the residual component of the gravimetric data allows a precise mapping of the borders of the Guamaré Graben. The regional component features of the topographic data are controlled by the pair of conjugate faults composed by the Carnaubais Fault (NE direction) and the Afonso Bezerra Fault (NW direction). On the other hand, the residual component of the topographic data shows that river valleis of NW direction are sharply interrupted where they intersect Carnaubais Fault. This fact is interpreted as an evidency that the last significant moviments occured in the Carnaubais Fault. Geologic, geomorphologic and geophysical data (magnetometry, resistivity, and self potential methods) were used in the Camurupim Area. The geologic mapping allows to identify five lithophacies unities. The first two unities (from base to top) were interpreted as composing a marine (or transitional) depositional sequency while the other were interpreted is composing a continental depositional sequence. The two sequences are clearly separated of an erosional discordance. The unities grouped in the marine sequence are composed by calcarenites (Unity A) and mudstones (Unity B). Unity A was deposited in a shalow plataform while Unity B, in a tidal flat. The unities grouped in the continental sequence are composed of conglomerate (Unity C) and sandstones (Unities D and E). Unities C and D are fluvial deposits while unity E is an eolian deposit. Unities A and B can be stratigraphycally correlated with Guamaré Formation. Unities C and D present three possible correlations. They may be correlated with Tibau Formation; or with Barreiras Formation; or with a clastic sediment deposit, commonly found in some rivers of Rio Grande do Norte state, and statigraphycally positioned above Barreiras Formation. Based on the decrease of the grain sizes from base to top both on unities C and D, it is proposed that these unities are correlated with the clastic sediment above mentioned. In this case, these unities would have, at least, Pleistocenic age. Finally, it is proposed that Unity E represent an eolian deposit that sufferred recent changes (at least in the Quaternary). The integrated interpretation of hydrographic, morphologic and geophysical data from Camurupim Area shows that Carnaubais Fault is locally composed by a system of several paralel subvertical faults. The fault presenting the larger vertical slip controls the valley of Camurupim river and separates the area in two blocks; in the nothern block the top of the Jandaira limestone is deeper than in the southern block. In addition, at least one of the faults in the northern block is cutting the whole sedimentary section. Because unities C , D, and/or E may be of Quaternary age, tectonic moviments possibly occured in Carnaubais Fault during this period. Detailled geologic mapping were conducted in beachrocks found in São Bento Area. This area is located at the intersection of the coast line with the Carnaubais Fault. The detected structures in the beachrocks are very similar to those caused by fragile deformations. The structures mapped in the beachrocks are consistent with a stress field with maximun compressional stress in E-W direction and extensional stress in the N-S direction. Since the Carnaubais Fault has a NE direction, it is optimally positioned to suffer tectonic movements under the action of such stress field. In addition, the shape of the coastal line appear to be controlled by the Carnaubais Fault. Furthemore, the observed structures in Camurupim Área are consistent with this stress field. These facts are interpreted as evidences that Carnaubais Fault and beachrocks suffered coupled tectonic movements. These moviments are of Neotectonic age because the beachrocks present ages less than 16,000 years

Aspectos Morfo-Dinâmicos daComplexo Lagunar Nísia Floresta-Papeba-Guaraíras, Região Costeira Sul Oriental Do RN

This dissertation presents the results of research developed in the Nísia Floresta-Papeba-Guaraíras Lagoon Complex, located on the south coast of the Rio Grande do Norte State. The main objectives of this dissertation were the stratrigraphic characterization, in detail scale, of the and the coastal dynamics study of the lagoonal deposits sedimentation, as well as the morpho-dynamic analysis of the area. Therefore, an interdisciplinary methodology was adopted, in which all sedimentological, morpho-tectonic and geomorphological data were integrated. Vibracore up to 4m in length were carried out in the lagoons. The referred lagoon complex made of a system of three lagoons that interact through two artificial channels, named Boqueirão and Surubajá. The Guaraíras lagoon, the largest one in the system, corresponds to the estuary zone of the Trairi and Jacu rivers. The sedimentary load brought by these rivers is strongly reworked by tide currents, forming an important net-work of channels and sandy bars inside this lagoon and close to its channel connection with the sea. The stratigraphic units of the area are Cenozoic in age, and are represented by sedimentary rocks of the Barreiras Formation (sandstones, mudstones and conglomerates) and by rocks beach, as well as by siliciclastics sediments related with the fluvial dynamics of tide plain (clay and sandy bars), and coast (sand dunes and beaches). Among the recognized geomorphologic aspects, there are the elements associated with continental enviroments (drainage basins of the Trairi, Baldum and Jacu rivers, coastal tableland supported by the Barreiras Formation), and transitional environments (lagoon complex, dune fields, cliffs, tidal channels and beach rocks lines). The morphotectonic analysis indicates that fauts affect Barreiras Formation sedimentary rocks, with two sets of main lineaments: SW-NE and SE-NW. The anomalies in the drainage net are directly associated with these fault/fracture system, which control and subdivede the low courses of the Trairi and Jacu rivers, at least a tail of their flowing principal courses. The Nísia Floresta, Papeba and Guaraíras lagoons present strong morphological control according to the lineament directions. Taking into account the lagoonal deposits, the sedimentological analyses reflect a sediment distribution related to the interaction of the fluvial and sea processes that act in the study area. The correlated deposits show textural mainly microclastic characteristics of shallow waters, and of currents of low to moderate energy.In general, the Nísia Floresta-Papeba-Guaraíras lagoon Complex, constitutes a very intrinsec group, that undewent important changes in historical times that are reflected in the currents clays. Inaddition to the natural processes that act in this system, we should take into account the antrohopic intervention, which have increased in the past years

Estudo evolutivo das condições ambientais da região costeira do município de Guamaré - RN

The work concerns on the evolutionary study of the environmental conditions of the coastal area of Guamaré-RN, where was investigated the geo-environmental transformation occourred in this region, whose primordial purpose was to diagnose the changes verified in the temporary space of five decades (1950 to 2001). With the objective of evaluanting the action of the active coastal processes (currents, waves, tides and winds), in order to understand the generating mechanisms of the erosion/sedimentation, evidenced by constant morphologic changes. The adopted methodological procedure consisted of a succession of stages, involving bibliographical and cartographic study, aereal photographs study, digital treatment of images, field work (sample collection, beaches profiles, characterization of the beach environment and morfodynamics), mapping correction and laboratory analyses (granulometry). The evolutionary study of the morphologic features indicated significant variations in the studied period, mainly, in the dunes, sea terraces, variation of the shore line and tidal flat, evidencing the largest transformations in the temporary space between 1988 and 2001. The analyses of the beach profiles showed a sedimentation tendency in the area of the profiles P1, P2 and P3, however in the monitored pediod, it was observed in the referred profiles, erosive and depositionals intervals evidencing a need of more effective monitoring. The results of the granulometric analyses indicate a predominance of mean to coarse sand in the backshore and estirancy area, as in the shoreface, the analyses indicated medium to fine sand. The morfodynamic state, showed that beach of Minhoto is intermediate state, with alternancy to reflective. The areas of larger vulnerability and sensibility are the tidal flat, shore line, barrier island and mobile dunes, that actually is suffering great environmental impact with expansion of the carcinoculture, urban presence and natural impacts (erosion of the shoreline)

Estratigrafia de sequências do intervalo aptiano ao albino na Bacia do Araripe, NE do Brasil

This study has as a main objective to make a detailed stratigraphic analysis of the Aptian-Albian interval in the east part of Araripe Basin, NE of Brazil which correspond, litostratigraphically, to Rio Da Batateira, Crato, Ipubi and Romualdo formations. The stratigraphic analysis was based on three different stages, the 1D, 2D and 3D analysis; these ones were adapted to the sequence stratigraphy concepts in order to create a chronostratigraphic framework for the study area within the basin. The database used in the present study contains field and well information, wells that belong to Santana Project, carried out by the Ministério de Minas e Energia- DNPM- CPRM from 1977 to 1978. The analysis 1D, which was done separately for each well and outcrop allowed the recognition of 13 sedimentary facies, mainly divided based on predominant litologies and sedimentary structures. Such facies are lithologically represented by pebble, sandstones, claystones, margas and evaporates; these facies are associated in order to characterize different depositional systems, that integrate from the continental environment (fluvial system and lacustre), paralic system (delta system and lagunar) to the marine environment (shelfenvironment). The first one, the fluvial system was divided into two subtypes: meandering fluvial system, characterized by fill channel and floodplain deposits; the facies of this system are associated vertically according to the textural thinning upward cycles (dirting-up trend pattern in well logs). Lacustrine environment is mainly related with the lithotypes of the Crato Formation, it shows a good distribution within the basin, been composed by green claystone deposits and calcareous laminated. Deltaic System represented by prodelta and delta front deposits which coarsening upward tendency. Lagunar system is characterised by the presence of anhydrite and gypsum deposits besides the black claystone deposits with vegetal fragments which do not contain a fauna typically marine. The marine platform system is composed by successions of black and gray claystone with fossiliferous fauna of Dinoflagellates (Spiniferites Mantell, Subtilisphaera Jain e Subtilisphaera Millipied genre) typical of this kind of depositional system. The sedimentary facies described are vertically arranged in cycles with progradational patterns which form textural coersening upward cycles and retrogradational, represented by textural thinning dowward cycles. Based in these cycles, in their stack pattern and the vertical change between these patterns, the systems tracks and the depositional sequences were recognized. The Low System Track (LST) and High System Track (HST) are composed by cycles with progradational stack pattern, whereas the Trangessive System Track (TST) is composed by retrogradational stack pattern cycles. The 2D stratigraphic analysis was done through the carrying out of two stratigraphic sections. For the selection of the datum the deepest maximum flooding surface was chosen, inside the Sequence 1, the execution of these sections allowed to understand the behaviour of six depositional systems along the study area, which were interpreted as cycles of second order or supercycles (cycles between 3 and 10 Ma), according to the Vail, et al (1977) classification. The Sequence 1, the oldest of the six identified is composed by the low, transgressive and high systems tracks. The first two system tracks are formed exclusively by fluvial deposits of the Rio da Batateira Formation whereas the third one includes deltaic and lacustrine deposits of the Crato Formation. The sequences 2 and 3 are formed by the transgressive systems tracks (lake spreading phase) and the highstand system track (lake backward phase). The TST of these sequences are formed by lacustrine deposits whereas HST contains deltaic deposits, indicating high rates of sedimentary supply at the time of it s deposition. The sequence 4 is composed by LST, TST and HST, The TST4 shows a significant fall of the lake base level, this track was developed in conditions of low relation between the creation rate of space of accommodation and the sedimentary influx. The TST4 marks the third phase of expansion of the lacustrine system in the section after the basin´s rift, the lacustrine system established in the previous track starts a backward phase in conditions that the sedimentary supply rate exceeds the creation rate of space accommodation. The sequence 5 was developed in two different phases, the first one is related with the latest expansion stage of the lake, (TST5), the basal track of this sequence. In this phase the base level of the lake rose considerably. The second phase (related to the TST5) indicates the end of the lacustrine domain in the Araripe Basin and the change to lagunar system ant tidal flat, with great portions in the supratidal. These systems were formed by restricted lagoons, with shallow level of water and with intermittent connections with the sea. This, was the phase when the Araripe Basin recorded the most several arid conditions of the whole interval studied, Aptian Albian, conditions that allow the formation of evaporitic deposits. The sequence 6 began its deposition after a significant fall of the sea (LST6). The sequence 6 is without any doubtlessly, the sequence that has deposits that prove the effective entrance of the sea into the Araripe Basin. The TST6, end of this sequence, represents the moment which the sea reaches its maximum level during the Aptian Albian time. The stratigraphic analysis of the Aptian Albian interval made possible the understanding that the main control in the development of the depositional sequences recognized in the Araripe Basin were the variations of the local base level, which are controlled itself by the climate changes

Interpretação de dados de GPR com base na hierarquização de superfícies limitantes e na adaptação de critérios sismoestratigráficos

Due to its high resolution, Ground Penetrating Radar (GPR) has been used to image subsurface sedimentary deposits. Because GPR and Seismic methods share some principles of image construction, the classic seismostratigraphic interpretation method has been also applied as an attempt to interpret GPR data. Nonetheless some advances in few particular contexts, the adaptations from seismic to GPR of seismostratigraphic tools and concepts unsuitable because the meaning given to the termination criteria in seismic stratigraphy do not represent the adequate geologic record in the GPR scale. Essentially, the open question relies in proposing a interpretation method for GPR data which allow not only relating product and sedimentary process in the GPR scale but also identifying or proposing depositional environments and correlating these results with the well known Sequence Stratigraphy cornerstones. The goal of this dissertation is to propose an interpretation methodology of GPR data able to perform this task at least for siliciclastic deposits. In order to do so, the proposed GPR interpretation method is based both on seismostratigraphic concepts and on the bounding surface hierarchy tool from Miall (1988). As consequence of this joint use, the results of GPR interpretation can be associated to the sedimentary facies in a genetic context, so that it is possible to: (i) individualize radar facies and correlate them to the sedimentary facies by using depositional models; (ii) characterize a given depositional system, and (iii) determine its stratigraphic framework highligthing how it evolved through geologic time. To illustrate its use the proposed methodology was applied in a GPR data set from Galos area which is part of the Galinhos spit, located in Rio Grande do Norte state, Northeastern Brazil. This spit presents high lateral sedimentary facies variation, containing in its sedimentary record from 4th to 6th cicles caused by high frequency sea level oscillation. The interpretation process was done throughout the following phases: (i) identification of a vertical facies succession, (ii) characterization of radar facies and its associated sedimentary products, (iii) recognition of the associated sedimentary process in a genetic context, and finally (iv) proposal of an evolutionay model for the Galinhos spit. This model proposes that the Galinhos spit is a barrier island constituted, from base to top, of the following sedimentary facies: tidal channel facies, tidal flat facies, shore facies, and aeolic facies (dunes). The tidal channel facies, in the base, is constituted of lateral accretion bars and filling deposits of the channels. The base facies is laterally truncated by the tidal flat facies. In the foreshore zone, the tidal flat facies is covered by the shore facies which is the register of a sea transgression. Finally, on the top of the stratigraphic column, aeolic dunes are deposited due to areal exposition caused by a sea regression

A sucessão siliciclástica-carbonática neocarbonífera da bacia do Amazonas, regiões de Monte Alegre e Itaituba (PA)

Registros sedimentares do Neocarbonífero, particularmente do Moscoviano, na Bacia do Amazonas, Norte do Brasil, caracterizam a zona de contato entre as formações Monte Alegre (rochas siliciclásticas) e Itaituba (rochas carbonáticas). A análise faciológica da sucessão Moscoviana de até 40 m de espessura, exposta na região de Monte Alegre e Itaituba, Estado do Pará, permitiu identificar 5 associações de fácies (AF), que correspondem a depósitos estabelecidos no ambiente costeiro, representados por dunas/intedunas eólicas (AF1), lençóis de areia/wadi (AF2), laguna/washover (AF3), praia/planície de maré (AF4) e laguna/delta de maré (AF5). A associação de campo de dunas/interdunas (AF1) é constituída por arenitos finos a médios, bimodais com estratificação cruzada de médio porte, laminação cavalgante transladante subcrítica e arenitos com gradação inversa. Arenitos finos com acamamento maciço, marcas de raízes e, subordinadamente, verrugas de aderência (adhesion warts), ocorrem nos limites dos sets de estratificação cruzada e indicam, respectivamente, paleossolos e migração de grãos por ação eólica sobre interduna úmida. Depósitos de lençóis de areia/wadi (AF2) são compostos de arenitos finos a médios com estratificação plano-paralela e laminação cavalgante transladante subcrítica, relacionados a superfícies de deflação (lençóis de areia), enquanto arenitos finos a médios com estratificações cruzadas tangencial e recumbente, e acamamento convoluto, caracterizam rios efêmeros com alta energia. Pelitos laminados e arenitos finos com laminação cruzada cavalgante, contendo o icnofóssil Palaeophycus, representam sedimentação em ambiente de baixa energia e foram agrupados na associação de laguna/washover (AF3). Os depósitos de praia/planície de maré (AF4) consistem em arenitos finos a médios, com estratificação plano-paralela a cruzada de baixo ângulo, intercalados com lentes de dolomito fino maciço, localmente truncados por arenitos finos a médios. Estas fácies foram formadas pelo fluxo-refluxo em ambiente de praia, localmente retrabalhadas por pequenos canais, enquanto o carbonato é interpretado como precipitado em poças (ponds). Na AF4 encontram-se também pelitos laminados com gretas de contração, lâminas curvadas de argila e arenitos com estratificação cruzada tabular de pequeno a médio porte, contendo filmes de argila sobre foresets e superfícies de reativação, sugerindo a migração de sandwaves na intermaré. A associação de laguna/delta de maré (AF5) é constituída por calcários dolomitizados (mudstones, wackestones, packstones e grainstones) com poros do tipo vug e móldicos e bioclastos de braquiópodes, equinodermas, foraminíferos, ostracodes, briozoários, trilobitas, moluscos e coral isolado não fragmentado, além do ichnofóssil Thalassinoides. Conglomerados com seixos de calcário dolomitizado, arenitos finos com estratificação cruzada de baixo ângulo e superfícies de reativação, localmente sobrepostos por arenitos finos com estratificação cruzada sigmoidal e laminação cruzada cavalgante, foram interpretados como depósitos de tidal inlet e delta de maré. As associações de fácies/microfácies e os dados paleontológicos descritos neste trabalho corroboram a predominância de ambientes lagunares, em parte, conectados a um ambiente desértico costeiro para o intervalo de transição entre as formações Monte Alegre e Itaituba. A abundância de grãos arredondados de areia fina nas fácies carbonáticas corrobora influxo siliciclástico advindo do ambiente desértico adjacente ao ambiente costeiro. Condições mais quentes e tropicais para a sucessão estudada são também indicadas pela presença de carbonatos e argilominerais como illita e, principalmente, esmectita, bem como uma fauna diversificada. Os litotipos siliciclásticos e carbonáticos intercalados que caracterizam a fase final da deposição Monte Alegre e o início da sedimentação Itaituba, justificam sua representação em um mesmo sistema deposicional costeiro.

Estratigrafia da sucessão sedimentar Pós-Barreiras (Zona Bragantina, Pará) com base em radar de penetração no solo

Investigação pioneira aplicando Radar de Penetração no Solo (GPR) na área da Praia do Atalaia, norte do Brasil, nos permitiu caracterizar, pela primeira vez, fácies e estratigrafia dos depósitos conhecidos informalmente como Sedimentos Pós-Barreiras (Plioceno e mais recente). Esta sucessão sedimentar recobre discordantemente o embasamento miocênico, representado pelas formações Pirabas/Barreiras. Três unidades estratigráficas foram reconhecidas. A Unidade 1, inferior, consiste em um intervalo com 6 m de espessura média dominado por reflexões pobremente definidas e de baixa amplitude, e que intergradam com reflexões de média escala dos tipos tangencial, obliquo e hummocky. A Unidade 2, intermediária, possui cerca de 9 m de espessura e inclui, principalmente, reflexões oblíquas de larga escala, cujas configurações variam de paralela, tangencial, sigmoidal a sigmoidal-complexa. A Unidade 3, superior, corresponde a um intervalo entre 3,5 e 9 m de espessura, sendo dominada por reflexões hummocky, seguidas por reflexões de média escala dos tipos oblíquo, paralelo a sub-paralelo, e em corte-e-preenchimento. A análise da configuração das reflexões internas e geometria das reflexões nos leva a propor que a unidade correspondente aos Sedimentos Pós-Barreiras é mais variável faciologicamente que inicialmente imaginado, incluindo depósitos eólicos (dunas costeiras), bem como depósitos de cordão litorâneo, planície de maré, canal e mangue. Além disto, o mapeamento das três unidades descritas acima é importante para desvendar a complexidade de sedimentação versus erosão durante o Neógeno tardio no norte do Brasil.

Unidades de relevo em zona costeira estuarina: municípios de Colares e Santo Antônio do Tauá

Este trabalho tem por objetivo identificar e discutir as unidades de relevo dos municípios de Colares e Santo Antônio do Tauá, Estado do Pará, Brasil. Apresenta como objeto de estudo a compartimentação do relevo. A área de estudada se localiza na parte oriental do Golfão Marajoara, porção nordeste da baía de Marajó, em um trecho tipicamente estuarino da zona costeira. A pesquisa foi realizada com base em revisão de literatura, levantamento cartográfico, tratamento, interpretação e vetorização de imagens orbitais e trabalhos de campo. Duas escalas de análise foram trabalhadas. A primeira escala referiu-se à Zona Costeira Amazônica (ZCA), caracterizada por ser uma costa baixa, predominantemente sedimentar, sujeita a regime de macromarés em sua maior parte e fortemente influenciada pelas descargas fluviais condicionadas pelo clima úmido. A formação regional desta costa deve-se às flutuações do nível relativo do mar, oscilações climáticas e à neotectônica, atuantes ao longo do Cenozóico Superior. A porção oriental do Golfão Marajoara é constituída pelo estuário do rio Pará, que se comporta como um tidal river ou estuário dominado por correntes fluviais, apesar da influência das marés. As descargas fluviais são o fator principal da hidrodinâmica estuarina, constituição sedimentar e organização da biota. Trata-se de um ambiente costeiro mais protegido da ação de ondas e da deriva litorânea, em comparação com o litoral atlântico do Nordeste do Pará. Na segunda escala de trabalho foram identificadas 8 unidades de relevo: leito estuarino arenoso; banco lamoso de intermaré; planície de maré lamosa; praia estuarina; cordão arenoso; planície aluvial sob influência de maré; planície aluvial; tabuleiro. Apenas a unidade do tabuleiro é considerada como relevo erosivo. A seguir, discutiu-se a distribuição espacial das unidades de relevo, que mostrou a presença de dois setores específicos. O setor 1, situado a oeste, é amplamente influenciado por marés, e nele predominam formas de relevo de acumulação, com destaque para as planícies aluviais sob influência de maré, que ocupam maior área, fato que revela um esquema de transição entre o domínio marinho e o flúviocontinental. As várzeas sucedem os mangues para o interior, à medida que diminui a influência da água salgada. O esquema básico de distribuição sedimentar é representado por areias de fundo de canal e lamas depositadas nas margens durante a maré baixa. As praias são reduzidas, o que se explica pela menor atuação de ondas, e pelo papel decisivo das correntes de maré e das vazantes na dinâmica costeira. Cordões arenosos localizados no interior da planície costeira são o testemunho da progradação da linha de costa. Neste setor, os tabuleiros encontramse muito fragmentados, em consequência da erosão e sedimentação por marés, canais e águas das chuvas. O setor 2, a leste, não sofre influência de marés, e apresenta um relevo menos compartimentado, com tabuleiros seccionados pela rede de drenagem. A dissecação fluvial forma vales com estreitas planícies aluviais, fato que revela uma superfície erosiva mais ampla.