The microstructure and mechanical properties of Mg-8Zn-8Al-4RE magnesium alloy

The Mg-8Zn-8Al-4RE (RE = mischmetal, mass%) magnesium alloy was prepared by using casting method. The microstructure and mechanical properties of as-cast alloy, solid solution alloy and aged alloy samples have been investigated. Optical microscopy, X-ray diffractometery and scanning electron microscope attached energy spectrometer were used to characterize the microstructure and phase composition for the alloy. Net shaped tau-Mg-32(Al,Zn)(49) phase was obtained at the grain boundary, and needle-like or blocky Al11RE3 phase disperses in grain boundary and alpha-Mg matrix. The tau-Mg-32(Al,Zn)(49) phase disappeared during solution treatment and a new phase of Al(2)CeZn2 formed during subsequent age treatment. The mechanical properties were performed by universal testing machine at room temperature, 150 degrees C and 200 degrees C, separately. The ultimate tensile strength of as-cast alloy is lower compared to an age treatment alloy at 200 degrees C for 12h. The strengths decreased with enhancing test temperature, but elongation has not been effect by age treatment.

Structure and mechanical properties of Mg-Zn-RE system alloys

The lightest density of Mg has stimulated renewed interest in Mg based alloys for applications in the automotive, aerospace and communications industries. However, Mg in the pure form has relatively low strength, limited ductility and is susceptible to corrosion. Great efforts have been made to improve the mechanical properties of Mg alloys. Alloying Mg with other elements is one of the most important methods. An important class of Mg alloys is the Mg-Zn-RE system (RE = rare earth elements). In recent few decades, a series of new Mg-Zn-RE system alloys have been obtained, and detailed the structure and mechanical properties of the alloys. In this paper, the structure and mechanical properties of the Mg-Zn-RE alloys have been summarized. It showed that these alloys have high strength and they are prospected to be widely used in the future.

Influence of structure and lonic radius on solubility limit in the Mg-Re systems

The relationship between structure, ionic radius and electronegativity and solubility of the various rare-earth elements in Mg was studied. It is found that light RE(La-Sm, Eu, Yb) have more complicated phase relation with Mg but the heavy RE(Gd-Lu, Sc) have the similar crystal structure with magnesium. Also it is found that the less electronegativity difference between Mg and RE is, the more solubility limit of RE in Mg is. The fact of the RE solubility decreased in magnesium with lowering temperature suggests that there is a possibility of Mg supersaturated solid solution formation and it will decomposition during aging. According to the rule, an megnesium alloy with higher strength feature was developed. Their mechanical properties are UTS 347MPa, YTS 290MPa and elongation 12.5% at room temperature.

Analysis of the mechanism and regulation of lactose transport and metabolism in Clostridium acetobutylicum ATCC 824.

Although the acetone-butanol-ethanol (ABE) fermentation of Clostridium acetobutylicum is currently uneconomic, the ability of the bacterium to metabolise a wide range of carbohydrates offers the potential for revival based on the use of cheap, low grade substrates. We have investigated the uptake and metabolism of lactose, the major sugar in industrial whey waste, by C. acetobutylicum ATCC 824. Lactose is taken up via a phosphoenolpyruvate (PEP)-dependent phosphotransferase system (PTS) comprising both soluble and membrane-associated components, and the resulting phosphorylated derivative is hydrolysed by a phospho--galactosidase. These activities are induced during growth on lactose, but are absent in glucose-grown cells. Analysis of the C. acetobutylicum genome sequence identified a gene system, lacRFEG, encoding a transcriptional regulator of the DeoR family, IIA and IICB components of a lactose PTS, and phospho--galactosidase. During growth in medium containing both glucose and lactose, C. acetobutylicum exhibited a classical diauxic growth, and the lac operon was not expressed until glucose was exhausted from the medium. The presence upstream of lacR of a potential catabolite responsive element (cre) encompassing the transcriptional start site is indicative of the mechanism of carbon catabolite repression characteristic of low-GC Gram-positive bacteria. A pathway for the uptake and metabolism of lactose by this industrially important organism is proposed.

Characteristics of preferred gait patterns: considerations for exercise prescription

Gait patterns have been widely studied in different fields of science for their particular characteristics. A dynamic approach of human locomotion considers walking and running as two stable behaviors adopted spontaneously under certain levels and natures of constraints. When no constraints are imposed, people naturally prefer to walk at the typical speed (i.e., around 4.5 km.h-1) that minimizes metabolic energy cost. The preferred walking speed (PWS) is also known to be an indicator of mobility and an important clinical factor in tracking impairements in motor behaviors. When constrained to move at higher speeds (e.g., being late), people naturally switch their preference to running for similar optimization reasons (e.g., physiological, biomechanical, perceptual, attentionnal costs). Indeed, the preferred transition speed (PTS) marks the natural seperation between walking and running and consistently falls within a speed range around 7.5 km.h-1. This chapter describes the constraint-dependant spontaneous organisation of the locomotor system, specifically on the walk-to-run speed continuum. We provide examples of the possibility of long-term adaptations of preferred behaviors to specific constraints such as factors related to traditional clothing or practice. We use knowledge from studies on preferred behaviors and on the relationship between affect and exercise adherence as a backdrop to prescribing a walk exercise program with an emphasis on populations with overweight or obesity.

An EORTC phase I study of epirubicin in combination with fixed doses of cyclophosphamide and infusional 5-fu (CEF-infu) as primary treatment of large operable or locally advanced/inflammatory breast cancer.

PURPOSE: The association of continuous infusion 5-fluorouracil, epirubicin (50 mg/m2 q 3 weeks) and a platinum compound (cisplatin or carboplatin) was found to be very active in patients with either locally advanced/inflammatory (LA/I) [1, 2] or large operable (LO) breast cancer (BC) [3]. The same rate of activity in terms of response rate (RR) and response duration was observed in LA/I BC patients when cisplatin was replaced by cyclophosphamide [4]. The dose of epirubicin was either 50 mg/m2 [ 1, 2, 3] or 60 mg/m2/cycle [4]. The main objective of this study was to determine the maximum tolerated dose (MTD) of epirubicin when given in combination with fixed doses of cyclophosphamide and infusional 5-fluorouracil (CEF-infu) as neoadjuvant therapy in patients with LO or LA/I BC for a maximum of 6 cycles. PATIENTS AND METHODS: Eligible patients had LO or LA/I BC, a performance status 0-1, adequate organ function and were <65 years old. Cyclophosphamide was administered at the dose of 400 mg/m2 day 1 and 8, q 4 weeks and infusional 5-fluorouracil 200 mg/m2/day was given day 1-28, q 4 weeks. Epirubicin was escalated from 30 to 45 and to 60 mg/m2 day 1 and 8; dose escalation was permitted if 0/3 or 1/6 patients experienced dose limiting toxicity (DLT) during the first 2 cycles of therapy. DLT for epirubicin was defined as febrile neutropenia, grade 4 neutropenia lasting for >7 days, grade 4 thrombocytopenia, or any non-haematological toxicity of CTC grade > or =3, excluding alopecia and plantar-palmar erythrodysesthesia (this toxicity was attributable to infusional 5-fluorouracil and was not considered a DLT of epirubicin). RESULTS: A total of 21 patients, median age 44 years (range 29-63) have been treated. 107 courses have been delivered, with a median number of 5 cycles per patient (range 4-6). DLTs on cycles I and 2 on level 1, 2, 3: grade 3 (G3) mucositis occurred in 1/10 patients treated at the third dose level. An interim analysis showed that G3 PPE occurred in 5/16 pts treated with the 28-day infusional 5-FU schedule at the 3 dose levels. The protocol was subsequently amended to limit the duration of infusional 5-fluorouracil infusion from 4 to 3 weeks. No G3 PPE was detected in 5 patients treated with this new schedule. CONCLUSIONS: This study establishes that epirubicin 60mg/m2 day 1 and 8, cyclophosphamide 400mg/m2 day 1 and 8 and infusional 5-fluorouracil 200 mg/m2/day day 1-21. q 4 weeks is the recommended dose level. Given the encouraging activity of this regimen (15/21 clinical responses) we have replaced infusional 5-fluorouracil by oral capecitabine in a recently activated study.

Riesgos laborales y uso responsable de plaguicidas en el acopio de granos : estudio de caso : planta de semillas del INTA Anguil

Según estimaciones de la Organización de las Naciones Unidas para la Alimentación y la Agricultura (FAO) el mundo duplicará la demanda de alimentos para el año 2050. La mitad de este crecimiento se explica por el aumento de la población mundial, mientras que la restante responde al incremento de los ingresos per cápita en países de bajos recursos (FAO, 2009). En este contexto, la solución viable a futuro es duplicar la productividad de aquellas zonas que todavía conservan algún potencial de expansión. Las grandes superficies de suelos de alta calidad con posibilidades de aumentar su productividad se encuentran en Estados Unidos, Ucrania y la Argentina. Una mayor producción requiere de productos fitosanitarios que representan un beneficio innegable garantizando estabilidad en los rendimientos. Sin embargo, la utilización de estos insumos entraña riesgos tóxicos, ya sea por un manejo inapropiado o por la ocurrencia de accidentes (CASAFE, 2009). El uso de los plaguicidas debe ser responsable a fin de evitar producir efectos adversos inmediatos y de largo plazo en la salud humana y el medio ambiente. Estos efectos pueden aparecer en todo el ciclo de vida del plaguicida, es decir durante la producción, transporte, almacenamiento, aplicación y disposición final. En la realización de su trabajo las personas pueden quedar expuestas a altos niveles de sustancias tóxicas. Actualmente la intoxicación con plaguicidas es un serio problema de salud que afecta a los trabajadores rurales, a la familia rural, y a la población en general. Se sabe que se producen millones de casos de intoxicación aguda por año a nivel mundial. Sin embargo, en nuestro país existe poca información sobre accidentes y se desconoce cuál es la contribución de los plaguicidas al desarrollo de enfermedades crónicas. Los principales riesgos con plaguicidas ligados a la salud humana se relacionan con la aparición de cáncer, defectos de nacimiento, afecciones del sistema nervioso y del funcionamiento del sistema endócrino (Ministerio de Salud, 2007). Para minimizar los efectos negativos, el uso de plaguicidas debe realizarse en el marco del Manejo Integrado de Plagas (MIP). En la selección debe considerarse la peligrosidad de los ingredientes activos, coadyuvantes y acompañantes, su potencial de persistencia y bioacumulación. Los trabajadores que manipulan plaguicidas deben recibir capacitación sobre riesgos, protecciones, y procedimientos de trabajo seguro. En el acopio de granos se combaten diversas plagas, principalmente insectos, ácaros, hongos y roedores. Estos organismos tienen altas tasas de reproducción y su presencia en el ámbito comercial se considera objetable debido a los daños y mermas que producen (López Mérida et al, 2001). En el control químico de estas plagas se utilizan sustancias peligrosas para la salud, por ejemplo fumigantes que actúan como vapores en concentraciones letales para el ser humano e insecticidas de alta toxicidad y gran poder residual capaces de ingresar al organismo por las vías inhalatoria y dérmica. En el presente trabajo se analizan los riesgos laborales en el acopio de granos con particular interés en el uso de plaguicidas de esta actividad. Adicionalmente, se realizó un estudio de caso en la Planta de Semillas de la Estación Experimental INTA Anguil. En este estudio se desarrollaron procedimientos de trabajo seguro (PTS) para el uso deplaguicidas y el trabajo en espacios confinados en dicho establecimiento (Anexos 1-5).

Systemic psychotherapy as an intervention for post-traumatic stress responses: an introduction, theoretical rationale and overview of developments in an emerging field of interest

The purpose of this article is to critically examine the literature to provide a rationale for including systemic family therapy (SFT) in the psycho-social treatment of people suffering the impact of post-traumatic stress (PTS). Attention is drawn to the relatively underdeveloped academic literature on PTS and the family. The impact of PTS is conceptualized within a psycho-social framework and the current evidence base for psycho-social interventions for PTS responses is described, highlighting the opportunity and need to undergird this area of daily practice. The impact of PTS on the family at multiple levels is identified, emphasizing its recursive nature. The case for SFT is articulated and a range of models of family intervention for PTS briefly reviewed, concluding with an emphasis on Walsh's key processes in family resilience as a framework for practice.

2-D R-matrix Propagator: Application and Future Developments

Ongoing developments of the 2-D R-matrix propagator are discussed. These include application to electron and photon collisions with H-like ions; computational innovations; and important theoretical developments to enable the accurate treatment of electron and photon collisions with multi-electron atoms at intermediate energies.

Electron-impact excitation of the astrophysically important singly ionized Fe-peak ions Sc and Ti

In this work we report on the evaluation of electron-impact collision strengths and Maxwellian averaged effective collision strengths for the lowly-ionized Fe-peak elements Sc II and Ti II using the parallel R-matrix package RMATRX II.

An optimal algorithm for low power multiplierless FIR filter design using chebychev criterion

In this paper, we propose a novel finite impulse response (FIR) filter design methodology that reduces the number of operations with a motivation to reduce power consumption and enhance performance. The novelty of our approach lies in the generation of filter coefficients such that they conform to a given low-power architecture, while meeting the given filter specifications. The proposed algorithm is formulated as a mixed integer linear programming problem that minimizes chebychev error and synthesizes coefficients which consist of pre-specified alphabets. The new modified coefficients can be used for low-power VLSI implementation of vector scaling operations such as FIR filtering using computation sharing multiplier (CSHM). Simulations in 0.25um technology show that CSHM FIR filter architecture can result in 55% power and 34% speed improvement compared to carry save multiplier (CSAM) based filters.

A Numerical and Experimental Assessment of the Use of a Turbine Utilizing Splitter Blades for an Automotive Variable Geometry Turbocharger

Automotive manufacturers require improved part load engine performance to further improve fuel economy. For a swing vane VGS (Variable Geometry Stator) turbine this means a more closed stator vane, to deal with the low MFRs (Mass Flow Rates), high PRs (Pressure Ratios) and low rotor rotational speeds. During these conditions the turbine is operating at low velocity ratios. As more energy is available at high pressure ratios and during lower turbocharger rotational speeds, a turbine which is efficient at these conditions is desirable. Another key aspect for automotive manufacturers is engine responsiveness. High inertia designs result in “turbo lag” which means an increased time before the target boost pressure is reached. Therefore, designs with improved performance at low velocity ratios, reduced inertia or an increased swallowing capacity are the current targets for turbocharger manufacturers.

To try to meet these design targets a CFD (Computational Fluid Dynamics) study was performed on a turbine wheel using splitter blades. A number of parameters were investigated. These included splitter blade merdional length, blade number and blade angle distribution.

The numerical study was performed on a scaled automotive VGS. Three different stator vane positions have been analysed. A single passage CFD model was developed and used to provide information on the flow features affecting performance in both the stator vanes and turbine.

Following the CFD investigation the design with the best compromise in terms of performance, inertia and increased MFP (Mass Flow Parameter) was selected for manufacture and testing. Tests were performed on a scaled, low temperature turbine test rig. The aerodynamic flow path of the gas stand was the same as that investigated during the CFD. The test results revealed a design which had similar performance at the closed stator vane positions when compared to the baseline wheel. At the maximum MFR stator vane condition a drop of −0.6% pts in efficiency was seen. However, 5.5% increase in MFP was obtained with the additional benefit of a drop in rotor inertia of 3.7%, compared to the baseline wheel.

Highly CO2 sensitive extruded fluorescent plastic indicator film based on HPTS

Highly-sensitive optical fluorescent extruded plastic films are reported for the detection of gaseous and dissolved CO2. The pH-sensitive fluorescent dye used is 8-Hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS, PTS-) coated on the surface of hydrophilic fumed silica and the base is tetrabutylammonium hydroxide (TBAH). The above components are used to create an HPTS pigment (i.e. HPTS/SiO2/TBAH) with a high CO2 sensitivity (%CO2(S=1/2) = 0.16%) and fast 50% response (t50↓) = 2 s and recovery (t50↑) = 5 s times. Highly CO2-sensitive plastic films are then fabricated, via the extrusion of the HPTS pigment powder in low-density polyethylene (LDPE). As with the HPTS-pigment, the luminescence intensity (at 515 nm) and absorbance (at 475 nm) of the HPTS plastic film decreases as the %CO2 in the ambient gas phase increases. The HPTS plastic film exhibits a high CO2 sensitivity, %CO2(S=1/2), of 0.29%, but a response time ˂2 min and recovery time ˂40 min, which is slower than that of the HPTS pigment. The HPTS plastic film is very stable under ambient conditions, (with a shelf life ˃ six month when stored in the dark but under otherwise ambient conditions). Moreover, the HPTS-film is stable in water, salt solution and even in acid (pH=2), and in each of these media it can be used to detect dissolved CO2.