Monitoring inflammation and airway remodeling by FMT in a chronic asthma model

Asthma is a multifactorial disease for which a variety of mouse models have been developed. A major drawback of these models is represented by the transient nature of the airway pathology peaking 24 to 72 hours after challenge and resolving in 1 to 2 weeks. The objective of this study is to characterize the temporal evolution of pulmonary inflammation and remodeling in a recently described mouse model of chronic asthma (8 week treatment with 3 allergens relevant for the human pathology: Dust mite, Ragweed, and Aspergillus; DRA). We studied the DRA model taking advantage of fluorescence molecular tomography (FMT) imaging using near-infrared probes to non-invasively evaluate lung inflammation and airway remodeling. At 4, 6, 8 or 11 weeks, cathepsin- and metalloproteinase-dependent fluorescence was evaluated in vivo. A subgroup of animals, after 4 weeks of DRA, was treated with Budesonide (100 µg/kg intranasally) daily for 4 weeks. Cathepsin-dependent fluorescence in DRA-sensitized mice resulted significantly increased at 6 and 8 weeks, and was markedly inhibited by budesonide. This fluorescent signal well correlated with ex vivo analysis such as bronchoalveolar lavage eosinophils and alveolar cell infiltration. Metalloproteinase-dependent fluorescence was significantly increased at 8 and 11 weeks, nicely correlated with collagen deposition, as evaluated histologically by Masson’s Trichrome staining, and airway epithelium hypertrophy, and was also partly inhibited by budesonide. In conclusion, FMT proved suitable for longitudinal study to evaluate asthma progression, both in terms of inflammatory cell infiltration and airway remodeling, allowing the determination of treatment efficacy in a chronic asthma model in mice.

DEVELOPMENT OF INTEGRATED BIOPROCESSING TECHNOLOGIES FOR THE PRODUCTION OF PECTIC OLIGOSACCHARIDES (POS) FROM AGRO-PROCESSING RESIDUES

This research deals with the production of pectic oligosaccharides (POS) from agro-industrial residues, with specific focus on development of continuous cross flow enzyme membrane reactor. Pectic oligosaccharides have recently gained attention due to their prebiotic activity. Lack of information on the continuous production of POS from agro-industrial residues formed the basis for the present study. Four residues i.e sugar beet pulp, onion hulls, pressed pumpkin cake and berry pomace were taken to study their pectin content. Based on the presence of higher galacturonic acid and arabinose (both homogalacturonan and rhamnogalacturonan) in sugar beet pulp and galacturonic acid (only homogalacturonan) in onion hulls, further optimization of different extraction methods of pectin (causing minimum damage to pectic chain) from these residues were done. The most suitable extractant for sugar beet pulp and onion hulls were nitric acid and sodium hexametaphosphate respectively. Further the experiments on the continuous production of POS from sugar beet pulp in an enzyme membrane reactor was initiated. Several optimization experiments indicated the optimum enzyme (Viscozyme) as well as feed concentration (25 g/L) to be used for producing POS from sugar beet pulp in an enzyme membrane reactor. The results highlighted that steady state POS production with volumetric and specific productivity of 22g/L/h and 11 g/gE/h respectively could be achieved by continuous cross flow filtration of sugar beet pulp pectic extract over 10 kDa membrane at residence time of 20 min. The POS yield of about 80% could be achieved using above conditions. Also, in this thesis preliminary experiments on the production and characterization of POS from onion hulls were conducted. The results revelaed that the most suitable enzyme for POS production from onion hulls is endo-polygalacturonase M2. The POS produced from onion hulls were present in the form of DP1 -DP10 in substituted as well as unsubstituted forms. This study clearly demonstrates that continuous production of POS from pectin rich sources can be achieved by using cross flow continuous enzyme membrane reactor.

Study of the effects of climate warming on seed germination and seed longevity of snowbed species

Understanding how climate change will affect the distribution and the phenology of plants is becoming an increasingly important topic in ecological studies. In response to climate warming, there are documented upward shift and alterations of phenology and physiology of several plant species. Despite this, the effects of climate change on plant regeneration from seeds have largely been neglected. However, regeneration from seeds, a key event in the plant life cycle, could be significantly affected by climate warming. In this regard, we investigated how climatic changes will affect the seasonal dynamics of seed germination and seedling survival in two different alpine context. The first part refers to five species inhabiting a snowbed located at the Gavia pass (Parco Naturale dello Stelvio). Here, plants were exposed, in the field, to natural conditions and to artificial warming using Open Top Chambers proposed by the ITEX (International Tundra Experiment). The germination curves of seeds produced were compared in order to highlight differences in seed germination ecology and in seed physiology induced by the climate warming. In the second part, we considered two tree species that form the treeline in Davos (Switzerland). As a surrogate of climate warming we used the natural thermal gradient driven by the altitude and we compared the germination behavior of the species studied in three sites at three different elevations in order to evaluate the likelihood of treeline shift under the predicted climate warming.

Retrotransposon expression profiling: Unveiling the hidden SINE transcriptome through Next-Generation Sequencing data analysis

Of the ~1.7 million SINE elements in the human genome, only a tiny number are estimated to be active in transcription by RNA polymerase (Pol) III. Tracing the individual loci from which SINE transcripts originate is complicated by their highly repetitive nature. By exploiting RNA-Seq datasets and unique SINE DNA sequences, we devised a bioinformatic pipeline allowing us to identify Pol III-dependent transcripts of individual SINE elements. When applied to ENCODE transcriptomes of seven human cell lines, this search strategy identified ~1300 Alu loci and ~1100 MIR loci corresponding to detectable transcripts, with ~120 and ~60 respectively Alu and MIR loci expressed in at least three cell lines. In vitro transcription of selected SINEs did not reflect their in vivo expression properties, and required the native 5’-flanking region in addition to internal promoter. We also identified a cluster of expressed AluYa5-derived transcription units, juxtaposed to snaR genes on chromosome 19, formed by a promoter-containing left monomer fused to an Alu-unrelated downstream moiety. Autonomous Pol III transcription was also revealed for SINEs nested within Pol II-transcribed genes raising the possibility of an underlying mechanism for Pol II gene regulation by SINE transcriptional units. Moreover the application of our bioinformatic pipeline to both RNA-seq data of cells subjected to an in vitro pro-oncogenic stimulus and of in vivo matched tumor and non-tumor samples allowed us to detect increased Alu RNA expression as well as the source loci of such deregulation. The ability to investigate SINE transcriptomes at single-locus resolution will facilitate both the identification of novel biologically relevant SINE RNAs and the assessment of SINE expression alteration under pathological conditions.

Caratterizzazione dei fenotipi e della risposta infiammatoria delle vie aeree nell'asma da isocianati

RIASSUNTO Premesse: Nonostante l’asma sia stata considerata per anni come un’unica malattia, studi recenti ne dimostrano l’eterogeneità. L’intento di caratterizzare tale eterogeneità ha condotto a studiare molteplici sottogruppi ovvero “fenotipi”. Nell’asma comune questo approccio è stato utilizzato da svariati anni, meno invece nell’asma occupazionale. Poco è noto anche riguardo alle caratteristiche della risposta infiammatoria nel corso dei test di provocazione bronchiale specifici (SIC) con isocianati valutata con metodiche non invasive; in particolare l’origine dell’incremento di ossido nitrico misurato ad un flusso espiratorio di 50 ml/s (FeNO50) precedentemente riscontrato, se sia alveolare o bronchiale, i livelli di dimetilarginina asimmetrica (ADMA) e la temperatura dell’aria espirata (EBT). Scopi dello studio: 1) verificare se anche per l’asma occupazionale (OA) da isocianati siano individuabili dei fenotipi o se essa ne rappresenti uno unico 2) studiare l’infiammazione delle vie aeree sperimentalmente indotta tramite:  la misurazione dell’NO frazionato mediante i parametri “flow-independent” che stimano sia la regione alveolare, ovvero la concentrazione di NO alveolare (CaNO), che la regione bronchiale ovvero il flusso di NO a livello bronchiale (JawNO), la concentrazione di NO a livello della parete bronchiale (CawNO) e la diffusione di NO all’interfaccia lume-parete bronchiale (DawNO);  la misurazione dell’ADMA nel condensato dell’aria esalata (EBC);  la misurazione dell’EBT. Materiali e metodi: Per lo studio sulla fenotipizzazione dell’asma da isocianati sono stati esaminati pazienti risultati positivi al test di provocazione bronchiale specifico con isocianati nel periodo compreso tra il 1988 e il 2013. Mediante l’utilizzo di un approccio multivariato dato dall’analisi gerarchica dei cluster e di un ampio pool di variabili appropriate abbiamo studiato se i soggetti affetti da asma professionale da isocianati rappresentino uno o più cluster. Mediante un altro approccio multivariato, dato dall’analisi delle k-medie, si sono individuate le caratteristiche che differenziano in maniera significativa i soggetti distribuiti nei diversi cluster. Per il secondo scopo dello studio dal 2012 al 2015 abbiamo reclutato soggetti afferiti presso il nostro centro per sospetta asma professionale. In questi pazienti in corso di sham-test e di SIC con isocianati fino a 24 post test sono stati monitorati e misurati: la funzionalità respiratoria incluso il test di provocazione bronchiale aspecifico con metacolina, l’NO frazionato, l’ADMA nell’EBC e l’EBT. Risultati: L’utilizzo dell’analisi gerarchica dei cluster ci ha portati a stabilire che i 187 pazienti studiati non costituiscono un unico gruppo omogeneo ma possono essere suddivisi in 3 cluster. L’applicazione poi del metodo multivariato delle k-medie, su tre cluster, ci ha consentito di individuare due cluster di pazienti sensibilizzati a TDI con prevalente risposta late al SIC e un cluster di pazienti sensibilizzati a MDI con prevalente risposta early al SIC. I soggetti appartenenti ai due cluster dei TDI differiscono fra di loro in maniera significativa per l’età alla diagnosi e all’esordio dei sintomi respiratori, la distribuzione per sesso, il BMI, la distribuzione in quanto abitudine al fumo, l’IT, il FEV1 basale % del predetto, l’età di inizio esposizione, gli anni di latenza e la durata dell’esposizione. Per quanto riguarda invece lo studio del profilo infiammatorio delle vie aeree abbiamo reclutato 25 pazienti, 18 maschi e 7 femmine. Nel gruppo dei SIC-positivi FeNO50 è aumentato significativamente a 24 ore dal test (mediana 111.8 ppb [IQR, 167.5]; p<0.05) se confrontato con lo sham (58.6 ppb [74.7]). I livelli di JawNO hanno manifestato il medesimo time-course con un incremento significativo post 24 ore dall’esposizione (6.6 nL/s [81]; p <0.05) se confrontato con lo sham (3.3 nL/s [3.7]). Non sono state riscontrate significative variazioni negli altri parametri. Non sono state riscontrate significative variazioni dell’ADMA nell’EBC e dell’EBT in entrambi i gruppi. Conclusioni: L’asma da isocianati è una patologia eterogenea come l’asma comune. Gli elementi principali che differenziano i cluster di asma professionale da isocianati sono l’agente sensibilizzante e il tipo di risposta al SIC (cluster 3 vs cluster 1 e 2). Anche nell’ambito dell’asma indotta dallo stesso agente (TDI) si sono evidenziati due cluster in cui quello con peggiore funzionalità respiratoria è rappresentato da soggetti più anziani alla diagnosi e con maggiore durata dell’esposizione. I motivi per cui l’asma occupazionale risulta essere eterogenea possono essere un differente meccanismo d’azione dei monomeri o una diversa suscettibilità degli individui appartenenti ai diversi cluster sia in termini di insorgenza della malattia sia in termini di evoluzione della stessa. L’assetto infiammatorio delle vie aeree nel corso del SIC non si caratterizza nei soggetti sensibilizzati ad isocianati né con un incremento dell’ADMA né con un incremento dell’EBT. Si riscontra invece un aumento di FeNO50 dovuto esclusivamente ad un aumentato flusso di NO dalla parete bronchiale al lume. Abbiamo perciò dimostrato che la misurazione del FeNO50 nel corso del SIC può fornire informazioni aggiuntive al monitoraggio funzionale spirometrico, anche perché la broncoostruzione e la risposta infiammatoria delle vie aeree si sono rivelate dissociate.

Advances in (poly)phenol research: novel sources, bioavailability, bioaccumulation and bioactivity

In the last decades, increasing scientific evidence has correlated the regular consumption of (poly)phenol-rich foods to a potential reduction of chronic disease incidence and mortality. However, epidemiological evidence on the role of (poly)phenol intake against the risk of some chronic diseases is promising, but not conclusive. In this framework a proper approach to (poly)phenol research is requested, using a step by step strategy. The plant kingdom produces an overwhelming array of structurally diverse secondary metabolites, among which flavonoids and related phenolic and (poly)phenolic compounds constitute one of the most numerous and widely distributed group of natural products. To date, more than 8000 structures have been classified as members of the phytochemical class of (poly)phenol, and among them over 4000 flavonoids have been identified. For this reason, a detailed food (poly)phenolic characterization is essential to identify the compounds that will likely enter the human body upon consumption, to predict the metabolites that will be generated and to unravel the potential effects of phenolic rich food sources on human health. In the first part of this work the attention was focused on the phenolic characterization of fruit and vegetable supplements, considering the increasing attention recently addressed to the so called "nutraceuticals", and on the main coffee industry by-product, namely coffee silverskin. The interest oriented toward (poly)phenols is then extended to their metabolism within the human body, paramount in the framework of their putative health promoting effects. Like all nutrients and non-nutrients, once introduced through the diet, (poly)phenols are subjected to an intense metabolism, able to convert the native compounds into similar conjugated, as well as smaller and deeply modified molecules, which in turn could be further conjugated. Although great strides have been made in the last decades, some steps of the (poly)phenol metabolism remain unclear and are interesting points of research. In the second part of this work the research was focused on a specific bran fraction, namely aleurone, added in feed pellets and in bread to investigate the absorption, metabolism and bioavailability of its phenolic compounds in animal and humans, with a preliminary in vitro step to determine their potential bioaccesibility. This part outlines the best approaches to assess the bioavailability of specific phenolics in several experimental models. The physiological mechanisms explaining the epidemiological and observational data on phenolics and health, are still far from being unraveled or understood in full. Many published results on phenolic actions at cell levels are biased by the fact that aglycones or native compounds have been used, not considering the previously mentioned chemical and biological transformations. In the last part of this thesis work, a new approach in (poly)phenol bioactivity investigation is proposed, consisting of a medium-long term treatment of animals with a (poly)phenol source, in this specific case resveratrol, the detection of its metabolites to determine their possible specific tissue accumulation, and the evaluation of specific parameters and/or mechanism of action at target tissue level. To conclude, this PhD work has contributed to advancing the field, as novel sources of (poly)phenols have been described, the bioavailability of (poly)phenols contained in a novel specific bran fraction used as ingredient has been evaluated in animal and in humans, and, finally, the tissue accumulation of specific (poly)phenol metabolites and the evaluation of specific parameters and/or mechanism of action has been carried out. For these reasons, this PhD work should be considered an example of adequate approach to the investigation of (poly)phenols and of their bioactivity, unavoidable in the process of unequivocally defining their effects on human health.

EFFECT OF FORMULATION ON PHYSICO-CHEMICAL PROPERTIES, WATER STATUS AND STABILITY OF PASTA, TOMATO SAUCE AND READY TO EAT PASTA MEALS

Ready to eat pasta meals are an important segment of convenience food, but these products are subjected to significant changes in physico-chemical properties during storage, which reduce their acceptability at the time of consumption. A deep understanding of the properties of the single phases, their dependence upon formulation, and the changes they undergo during storage is very important to intelligently intervene on products properties to improve their quality at the time of consumer’s consumption. This work has focused on the effect of formulation on physico-chemical properties of pasta and tomato sauce with a special focus on mechanical/rheological attributes and water status. Variable considered in pasta formulation were gluten, glycerol and moisture content and their effect was studied in both freshly cooked or shelf-stable cooked pasta. The effect of multiple hydrocolloids (at different levels) was considered in the case of tomato sauce. In the case of pasta, it was found that water content was indeed a very important variable in defying pasta mechanical properties and water status. Higher moisture contents in pasta resulted in softer samples and reduced the changes in physico-chemical parameters during storage. Glycerol was found to favor water uptake and to soften the pasta matrix, acting as plasticizer and increasing molecular mobility. The addition of gluten hardened pasta but did not affect the water status. The combination of higher amount of gluten (15%, g gluten / 100 g product) with higher moisture content (59-65%, g water / 100 g product) were found to minimize the physico-chemical changes occurring in RTE pasta meals during storage, improving quality at longer storage times. Hydrocolloids added into tomato sauce modulated its mechanical attributes and water status in very different manner, depending on hydrocolloid type and concentration. This may allow to produce tomato sauce for different applications and that are expected to have different performance if placed in contact with pasta in a RTE meal. Future work should include an investigation of how the interaction between the two phases (pasta and sauce) can be modulated and controlled by controlling the properties of the single phases with the goal of obtaining highly acceptable products also at longer storage times.

Italian wild hop (Humulus lupulus L.): from biodiversity evaluation to varietal selection

Hop (Humulus lupulus L.) is a dioecius perennial plant. The cultivation is specific for female plants, used mainly for brewing and pharmacology. Female inflorescence, known as cone or strobili, contains bitter acids, essential oil and polyphenols. Commercial hop cultivation provides better results in regions between 45 and 55 degrees north or south in latitude, an area that also includes the northern part of Italy, where hop is endemic. Despite several studies have been conducted on the characterization of wild hops biodiversity in the U.S.A. and Europe, a lack in literature concerning the description of Italian wild hops genetic variability is still present. The increasing request of hop varieties improved in important traits, like diseases, resistance and valuable aroma profile, is bringing the hop industry. Moreover, Italian agricultural sector needs new impulse to be competitive in the market. In this view, Italian wild hop biodiversity is a resource, useful for the obtaining of Italian hop varieties, characterized by peculiar aromatic traits and more adaptable to Mediterranean climate, making their cultivation more sustainable. Based on this consideration, the present Ph.D. thesis deals with the evaluation of the Italian hop biodiversity, through the characterization of the wild samples under different point of view. The project started with the recovery of wild hop samples in different areas of north of Italy to consitue a collection field, where 11 commercial cultivars of US and European origin were grown, to have a complete vision of the hop panorama. Ph.D. project followed different research lines, the results of each one contributed to completly characterize the northern Italian hop wild biodiversity: • the morphological description showed a high phenological variability (Study 1); • the genetic characterization confirmed the rich biodiversity of the Italian population and showed a significant genetic distance between Italian genotypes and the commercial cultivars, taken in consideration (Study 2); • the need of an early sex discrimination method leads to an improvement of a genetic marker, developing a more efficient marker (Study 3); • a complete morphologic, genetic and chemical analysis of plants gave results to select the most promising genotypes (Study 4); • the comparison between the performance of wild hops and commercial cultivars in the same collection field indicated that some wild genotypes had a higher environment adaptability (Study 5); • the evaluation of the terroir, obtained comparing commercial cultivars in the collection field and the same genotypes purchased in the market, showed the influence of the northern Italian environment on the aromatic profile (Study 5); • a new analytical method for the revelation of bioactive metabolites and a simple extraction procedure were developed (Study 6). In conclusion, the Ph.D. thesis, contains the first characterization of Italian wild hop, made under field condition. The present study: i) permits to obtain a complete and significative description of the genotypes; ii) allows the identification of the most promising wild Italian genotypes; iii) allows the identification of commercial cultivars more adaptable the northern Italian climate.

Multi-scale approaches to Food Sciences: computational QM and MM explorations at the microscopic level

L'obiettivo principale della politica di sicurezza alimentare è quello di garantire la salute dei consumatori attraverso regole e protocolli di sicurezza specifici. Al fine di rispondere ai requisiti di sicurezza alimentare e standardizzazione della qualità, nel 2002 il Parlamento Europeo e il Consiglio dell'UE (Regolamento (CE) 178/2002 (CE, 2002)), hanno cercato di uniformare concetti, principi e procedure in modo da fornire una base comune in materia di disciplina degli alimenti e mangimi provenienti da Stati membri a livello comunitario. La formalizzazione di regole e protocolli di standardizzazione dovrebbe però passare attraverso una più dettagliata e accurata comprensione ed armonizzazione delle proprietà globali (macroscopiche), pseudo-locali (mesoscopiche), ed eventualmente, locali (microscopiche) dei prodotti alimentari. L'obiettivo principale di questa tesi di dottorato è di illustrare come le tecniche computazionali possano rappresentare un valido supporto per l'analisi e ciò tramite (i) l’applicazione di protocolli e (ii) miglioramento delle tecniche ampiamente applicate. Una dimostrazione diretta delle potenzialità già offerte dagli approcci computazionali viene offerta nel primo lavoro in cui un virtual screening basato su docking è stato applicato al fine di valutare la preliminare xeno-androgenicità di alcuni contaminanti alimentari. Il secondo e terzo lavoro riguardano lo sviluppo e la convalida di nuovi descrittori chimico-fisici in un contesto 3D-QSAR. Denominata HyPhar (Hydrophobic Pharmacophore), la nuova metodologia così messa a punto è stata usata per esplorare il tema della selettività tra bersagli molecolari strutturalmente correlati e ha così dimostrato di possedere i necessari requisiti di applicabilità e adattabilità in un contesto alimentare. Nel complesso, i risultati ci permettono di essere fiduciosi nel potenziale impatto che le tecniche in silico potranno avere nella identificazione e chiarificazione di eventi molecolari implicati negli aspetti tossicologici e nutrizionali degli alimenti.

Valutazione del rischio ecologico e sviluppo di strategie innovative per il monitoraggio della qualita’ dei corpi idrici: applicazione di un nuovo approccio integrato in un bacino pilota.

Freshwater is extremely precious; but even more precious than freshwater is clean freshwater. From the time that 2/3 of our planet is covered in water, we have contaminated our globe with chemicals that have been used by industrial activities over the last century in a unprecedented way causing harm to humans and wildlife. We have to adopt a new scientific mindset in order to face this problem so to protect this important resource. The Water Framework Directive (European Parliament and the Council, 2000) is a milestone legislative document that transformed the way that water quality monitoring is undertaken across all Member States by introducing the Ecological and Chemical Status. A “good or higher” Ecological Status is expected to be achieved for all waterbodies in Europe by 2015. Yet, most of the European waterbodies, which are determined to be at risk, or of moderate to bad quality, further information will be required so that adequate remediation strategies can be implemented. To date, water quality evaluation is based on five biological components (phytoplankton, macrophytes and benthic algae, macroinvertebrates and fishes) and various hydromorphological and physicochemical elements. The evaluation of the chemical status is principally based on 33 priority substances and on 12 xenobiotics, considered as dangerous for the environment. This approach takes into account only a part of the numerous xenobiotics that can be present in surface waters and could not evidence all the possible causes of ecotoxicological stress that can act in a water section. The mixtures of toxic chemicals may constitute an ecological risk not predictable on the basis of the single component concentration. To improve water quality, sources of contamination and causes of ecological alterations need to be identified. On the other hand, the analysis of the community structure, which is the result of multiple processes, including hydrological constrains and physico-chemical stress, give back only a “photograph” of the actual status of a site without revealing causes and sources of the perturbation. A multidisciplinary approach, able to integrate the information obtained by different methods, such as community structure analysis and eco-genotoxicological studies, could help overcome some of the difficulties in properly identifying the different causes of stress in risk assessment. In synthesis, the river ecological status is the result of a combination of multiple pressures that, for management purposes and quality improvement, have to be disentangled from each other. To reduce actual uncertainty in risk assessment, methods that establish quantitative links between levels of contamination and community alterations are needed. The analysis of macrobenthic invertebrate community structure has been widely used to identify sites subjected to perturbation. Trait-based descriptors of community structure constitute a useful method in ecological risk assessment. The diagnostic capacity of freshwater biomonitoring could be improved by chronic sublethal toxicity testing of water and sediment samples. Requiring an exposure time that covers most of the species’ life cycle, chronic toxicity tests are able to reveal negative effects on life-history traits at contaminant concentrations well below the acute toxicity level. Furthermore, the responses of high-level endpoints (growth, fecundity, mortality) can be integrated in order to evaluate the impact on population’s dynamics, a highly relevant endpoint from the ecological point of view. To gain more accurate information about potential causes and consequences of environmental contamination, the evaluation of adverse effects at physiological, biochemical and genetic level is also needed. The use of different biomarkers and toxicity tests can give information about the sub-lethal and toxic load of environmental compartments. Biomarkers give essential information about the exposure to toxicants, such as endocrine disruptor compounds and genotoxic substances whose negative effects cannot be evidenced by using only high-level toxicological endpoints. The increasing presence of genotoxic pollutants in the environment has caused concern regarding the potential harmful effects of xenobiotics on human health, and interest on the development of new and more sensitive methods for the assessment of mutagenic and cancerogenic risk. Within the WFD, biomarkers and bioassays are regarded as important tools to gain lines of evidence for cause-effect relationship in ecological quality assessment. Despite the scientific community clearly addresses the advantages and necessity of an ecotoxicological approach within the ecological quality assessment, a recent review reports that, more than one decade after the publication of the WFD, only few studies have attempted to integrate ecological water status assessment and biological methods (namely biomarkers or bioassays). None of the fifteen reviewed studies included both biomarkers and bioassays. The integrated approach developed in this PhD Thesis comprises a set of laboratory bioassays (Daphnia magna acute and chronic toxicity tests, Comet Assay and FPG-Comet) newly-developed, modified tacking a cue from standardized existing protocols or applied for freshwater quality testing (ecotoxicological, genotoxicological and toxicogenomic assays), coupled with field investigations on macrobenthic community structures (SPEAR and EBI indexes). Together with the development of new bioassays with Daphnia magna, the feasibility of eco-genotoxicological testing of freshwater and sediment quality with Heterocypris incongruens was evaluated (Comet Assay and a protocol for chronic toxicity). However, the Comet Assay, although standardized, was not applied to freshwater samples due to the lack of sensitivity of this species observed after 24h of exposure to relatively high (and not environmentally relevant) concentrations of reference genotoxicants. Furthermore, this species demonstrated to be unsuitable also for chronic toxicity testing due to the difficult evaluation of fecundity as sub-lethal endpoint of exposure and complications due to its biology and behaviour. The study was applied to a pilot hydrographic sub-Basin, by selecting section subjected to different levels of anthropogenic pressure: this allowed us to establish the reference conditions, to select the most significant endpoints and to evaluate the coherence of the responses of the different lines of evidence (alteration of community structure, eco-genotoxicological responses, alteration of gene expression profiles) and, finally, the diagnostic capacity of the monitoring strategy. Significant correlations were found between the genotoxicological parameter Tail Intensity % (TI%) and macrobenthic community descriptors SPEAR (p<0.001) and EBI (p<0.05), between the genotoxicological parameter describing DNA oxidative stress (ΔTI%) and mean levels of nitrates (p<0.01) and between reproductive impairment (Failed Development % from D. magna chronic bioassays) and TI% (p<0.001) as well as EBI (p<0.001). While correlation among parameters demonstrates a general coherence in the response to increasing impacts, the concomitant ability of each single endpoint to be responsive to specific sources of stress is at the basis of the diagnostic capacity of the integrated approach as demonstrated by stations presenting a mismatch among the different lines of evidence. The chosen set of bioassays, as well as the selected endpoints, are not providing redundant indications on the water quality status but, on the contrary, are contributing with complementary pieces of information about the several stressors that insist simultaneously on a waterbody section providing this monitoring strategy with a solid diagnostic capacity. Our approach should provide opportunities for the integration of biological effects into monitoring programmes for surface water, especially in investigative monitoring. Moreover, it should provide a more realistic assessment of impact and exposure of aquatic organisms to contaminants. Finally this approach should provide an evaluation of drivers of change in biodiversity and its causalities on ecosystem function/services provision, that is the direct and indirect contributions to human well-being.

Indagine modellistica sulla tenuta idraulica delle difese arginali deputate alla protezione idraulica del territorio

La prima parte di questo lavoro di tesi tratta dell’interazione tra un bacino di laminazione e il sottostante acquifero: è in fase di progetto, infatti, la costruzione di una cassa di espansione sul torrente Baganza, a monte della città di Parma. L’obiettivo di tale intervento è di ridurre il rischio di esondazione immagazzinando temporaneamente, in un serbatoio artificiale, la parte più pericolosa del volume di piena che verrebbe rilasciata successivamente con portate che possono essere agevolmente contenute nel tratto cittadino del torrente. L’acquifero è stato preliminarmente indagato e monitorato permettendone la caratterizzazione litostratigrafica. La stratigrafia si può riassumere in una sequenza di strati ghiaioso-sabbiosi con successione di lenti d’argilla più o meno spesse e continue, distinguendo due acquiferi differenti (uno freatico ed uno confinato). Nel presente studio si fa riferimento al solo acquifero superficiale che è stato modellato numericamente, alle differenze finite, per mezzo del software MODFLOW_2005. L'obiettivo del presente lavoro è di rappresentare il sistema acquifero nelle condizioni attuali (in assenza di alcuna opera) e di progetto. La calibrazione è stata condotta in condizioni stazionarie utilizzando i livelli piezometrici raccolti nei punti d’osservazione durante la primavera del 2013. I valori di conducibilità idraulica sono stati stimati per mezzo di un approccio geostatistico Bayesiano. Il codice utilizzato per la stima è il bgaPEST, un software gratuito per la soluzione di problemi inversi fortemente parametrizzati, sviluppato sulla base dei protocolli del software PEST. La metodologia inversa stima il campo di conducibilità idraulica combinando osservazioni sullo stato del sistema (livelli piezometrici nel caso in esame) e informazioni a-priori sulla struttura dei parametri incogniti. La procedura inversa richiede il calcolo della sensitività di ciascuna osservazione a ciascuno dei parametri stimati; questa è stata valutata in maniera efficiente facendo ricorso ad una formulazione agli stati aggiunti del codice in avanti MODFLOW_2005_Adjoint. I risultati della metodologia sono coerenti con la natura alluvionale dell'acquifero indagato e con le informazioni raccolte nei punti di osservazione. Il modello calibrato può quindi essere utilizzato come supporto alla progettazione e gestione dell’opera di laminazione. La seconda parte di questa tesi tratta l'analisi delle sollecitazioni indotte dai percorsi di flusso preferenziali causati da fenomeni di piping all’interno dei rilevati arginali. Tali percorsi preferenziali possono essere dovuti alla presenza di gallerie scavate da animali selvatici. Questo studio è stato ispirato dal crollo del rilevato arginale del Fiume Secchia (Modena), che si è verificato in gennaio 2014 a seguito di un evento alluvionale, durante il quale il livello dell'acqua non ha mai raggiunto la sommità arginale. La commissione scientifica, la cui relazione finale fornisce i dati utilizzati per questo studio, ha attribuito, con molta probabilità, il crollo del rilevato alla presenza di tane di animali. Con lo scopo di analizzare il comportamento del rilevato in condizioni integre e in condizioni modificate dall'esistenza di un tunnel che attraversa il manufatto arginale, è stato realizzato un modello numerico 3D dell’argine mediante i noti software Femwater e Feflow. I modelli descrivono le infiltrazioni all'interno del rilevato considerando il terreno in entrambe le porzioni sature ed insature, adottando la tecnica agli elementi finiti. La tana è stata rappresentata da elementi con elevata permeabilità e porosità, i cui valori sono stati modificati al fine di valutare le diverse influenze sui flussi e sui contenuti idrici. Per valutare se le situazioni analizzate presentino o meno il verificarsi del fenomeno di erosione, sono stati calcolati i valori del fattore di sicurezza. Questo è stato valutato in differenti modi, tra cui quello recentemente proposto da Richards e Reddy (2014), che si riferisce al criterio di energia cinetica critica. In ultima analisi è stato utilizzato il modello di Bonelli (2007) per calcolare il tempo di erosione ed il tempo rimanente al collasso del rilevato.

Asma, abitudini e stile di vita "Analisi retrospettiva di un campione di pazienti asmatici seguito in ambulatorio di terzo livello"

Growing evidence suggest the importance of different environments in promoting the pathogenesis and/or exacerbation of asthma. Indoor air pollution is a major contributor to human exposure, since people spend up to 90% of their day indoors. Apart from active smoking, indoor pollution is considered one of the major preventable risk factors of chronic respiratory diseases. The professional activity can also be dangerous because it exposes the subject to environments that can promote the onset of asthma or worsening of the latter in those already affected. Even bad habits such as incorrect diet, lead to more difficulty in controlling their disease. However asthma is a multifactorial disease in nature so it is not easy to distinguish the role of occupational exposure, pollution and normal habits such as smoking, nutrition, sports, etc. This retrospective study was conducted on a sample of asthma patients residing in the metropolitan area of Parma. 116 patients were selected among those who are followed up at least two years at the Asthma outpatient Clinic of Parma University Hospital. The sample in question is therefore closely controlled and monitored; it comes to patients who are well educated on the control of their disease, are able to take appropriate measures to minimize the symptomatology. With this tight approach is proposed to minimize the effect of confounding and then traced with greater certainty the possible cause of the failure to control the disease. For this purpose, each patient was subjected to regular checkups; we took as a reference the period of time between April and October 2015. During each visit, in addition to general data for each patient, we were collected personal information about their habits and way of life through a validated questionnaire delivered and completed by the patient during the visit in the presence of the permanent staff. The questionnaire covers mainly the qualification of the patient, its possible occupational exposure, his home, with information about nearby traffic, time spent outside, physical activity (place and time), exposure to chemicals, exposure to various fumes (fireplace or stove) and cigarette smoke, comorbidities and any drugs taken during the visits considered. Regarding the respiratory conditions of patients during every examination we were considered: Asthma Control Test (a test performed by patients to assess the state of the disease during the month preceding the test), the measurement of exhaled nitric oxide (FeNO) as an index of airways inflammation, measuring the resistance level of small airways (R5-R20) and some spirometric values observed in experiment; in particular the forced vital capacity (FVC), forced expiratory volume in the first second (FEV 1), FEV1/FVC ratio, forced expiratory flow rate over the middle 50% of the FVC (FEF25–75) and FEF25-75/FVC were recorded. The sample has been studied considering both the changes of the respiratory parameters for every patient in their examinations, and the respiratory parameters of all the examinations took as a whole in relation with the variables considered. From the results obtained, the patients are clinically stable; their adopted lifestyle and the exposure to possible sources of outdoor pollution, seems not affect the overall control of their disease. Some findings of our study are of interest. First, the subjects who carry a steroid therapy show a clinical worst, as revealed by the decrease of most spirometric indices, particularly FEF25, FEF75, FEF25-75 and R5-R20; also, the presence of comorbidities and the subsequent intake of other drugs, in addition to normal therapy for asthma, seem to be conditions associated with poorer performance in the functional respiratory parameters in particular FEV1/FVC, FEF75 and FEF25-75. Spirometric indexes that are down are mainly those related to obstruction imposed on small airways; this suggests a neglect to the latter on the contrary should be further explored and treated accordingly. It is also observed that both patients are overweight than those living on the lower floors and/or who have the most windows exposed to traffic, showed a decrease of pulmonary function, especially those relate to an obstruction at the small airways level. In conclusion, our results provided the evidence that a most appropriate therapy, specific to reach the small airways, associated with a healthy lifestyle, can help improve the management of asthma.

Reformulation of a thermostable broadly protective recombinant vaccine against human papilloma virus

The causal relationship between Human Papilloma Virus (HPV) infection and cervical cancer has motivated the development, and further improvement, of prophylactic vaccines against this virus. 70% of cervical cancers, 80% of which in low-resources countries, are associated to HPV16 and HPV18 infection, with 13 additional HPV types, classified as high-risk, responsible for the remaining 30% of tumors. Current vaccines, Cervarix® (GlaxoSmithKline) and Gardasil®(Merk), are based on virus-like particles (VLP) obtained by self-assembly of the major capsid protein L1. Despite their undisputable immunogenicity and safety, the fact that protection afforded by these vaccines is largely limited to the cognate serotypes included in the vaccine (HPV 16 and 18, plus five additional viral types incorporated into a newly licensed nonavalent vaccine) along with high production costs and reduced thermal stability, are pushing the development of 2nd generation HPV vaccines based on minor capsid protein L2. The increase in protection broadness afforded by the use of L2 cross-neutralizing epitopes, plus a marked reduction of production costs due to bacterial expression of the antigens and a considerable increase in thermal stability could strongly enhance vaccine distribution and usage in low-resource countries. Previous studies from our group identified three tandem repeats of the L2 aa. 20-38 peptide as a strongly immunogenic epitope if exposed on the scaffold protein thioredoxin (Trx). The aim of this thesis work is the improvement of the Trx-L2 vaccine formulation with regard to cross-protection and thermostability, in order to identify an antigen suitable for a phase I clinical trial. By testing Trx from different microorganisms, we selected P. furiosus thioredoxin (PfTrx) as the optimal scaffold because of its sustained peptide epitope constraining capacity and striking thermal stability (24 hours at 100°C). Alternative production systems, such as secretory Trx-L2 expression in the yeast P. pastoris, have also been set-up and evaluated as possible means to further increase production yields, with a concomitant reduction of production costs. Limitations in immune-responsiveness caused by MHC class II polymorphisms –as observed, for example, in different mouse strains- have been overcome by introducing promiscuous T-helper (Th) epitopes, e.g., PADRE (Pan DR Epitope), at both ends of PfTrx. This allowed us to obtain fairly strong immune responses even in mice (C57BL/6) normally unresponsive to the basic Trx-L2 vaccine. Cross-protection was not increased, however. I thus designed, produced and tested a novel multi-epitope formulation consisting of 8 and 11 L2(20-38) epitopes derived from different HPV types, tandemly joined into a single thioredoxin molecule (“concatemers”). To try to further increase immunogenicity, I also fused our 8X and 11X PfTrx-L2 concatemers to the N-terminus of an engineered complement-binding protein (C4bp), capable to spontaneously assemble into ordered hepatmeric structures, previously validated as a molecular adjuvant. Fusion to C4bp indeed improved antigen presentation, with a fairly significant increase in both immunogenicity and cross-protection. Another important issue I addressed, is the reduction of vaccine doses/treatment, which can be achieved by increasing immunogenicity, while also allowing for a delayed release of the antigen. I obtained preliminary, yet quite encouraging results in this direction with the use of a novel, solid-phase vaccine formulation, consisting of the basic PfTrx-L2 vaccine and its C4bp fusion derivative adsorbed to mesoporus silica-rods (MSR).