A Morphological Box for Handling Temporal Data in B2C Systems

User interfaces are key properties of Business-to-Consumer (B2C) systems, and Web-based reservation systems are an important class of B2C systems. In this paper we show that these systems use a surprisingly broad spectrum of different approaches to handling temporal data in their Web inter faces. Based on these observations and on a literature analysis we develop a Morphological Box to present the main options for handling temporal data and give examples. The results indicate that the present state of developing and maintaining B2C systems has not been much influenced by modern Web Engi neering concepts and that there is considerable potential for improvement.

The morphology of service bundling settings

The purpose of this paper is to advance our understanding of what contextual factors influence the service bundling process in an organizational setting. Although previous literature contains insights into the mechanisms underlying bundling and the artefacts for performing the bundling task itself, the body of knowledge seems to lack a comprehensive framework for analysing the actual scenario in which the bundling process is performed. This is required as the scenario will influence the bundling method and the IT support. We address this need by designing a morphological box for analysing bundling scenarios in different organizational settings. The factors featured in the box are systematised into a set of four categories of bundling layers which we identify from reviewing literature. The two core layers in the framework are the service bundling on a type level and on an instance level (i.e. configuration). To demonstrate the applicability and utility of the proposed morphological box, we apply it to assess the underlying differences and commonalities of two different bundling scenarios from the B2B and G2C sectors which stress the differences between bundling on a type and instance level. In addition, we identify several prospects for future research that can benefit from the proposed morphological box.

Identification and evaluation of service bundles for governmental one-stop portals

Recent advances in the area of ‘Transformational Government’ position the citizen at the centre of focus. This paradigm shift from a department-centric to a citizen-centric focus requires governments to re-think their approach to service delivery, thereby decreasing costs and increasing citizen satisfaction. The introduction of franchises as a virtual business layer between the departments and their citizens is intended to provide a solution. Franchises are structured to address the needs of citizens independent of internal departmental structures. For delivering services online, governments pursue the development of a One-Stop Portal, which structures information and services through those franchises. Thus, each franchise can be mapped to a specific service bundle, which groups together services that are deemed to be of relevance to a specific citizen need. This study focuses on the development and evaluation of these service bundles. In particular, two research questions guide the line of investigation of this study: Research Question 1): What methods can be used by governments to identify service bundles as part of governmental One-Stop Portals? Research Question 2): How can the quality of service bundles in governmental One-Stop Portals be evaluated? The first research question asks about the identification of suitable service bundle identification methods. A literature review was conducted, to, initially, conceptualise the service bundling task, in general. As a consequence, a 4-layer model of service bundling and a morphological box were created, detailing characteristics that are of relevance when identifying service bundles. Furthermore, a literature review of Decision-Support Systems was conducted to identify approaches of relevance in different bundling scenarios. These initial findings were complemented by targeted studies of multiple leading governments in the e-government domain, as well as with a local expert in the field. Here, the aim was to identify the current status of online service delivery and service bundling in practice. These findings led to the conceptualising of two service bundle identification methods, applicable in the context of Queensland Government: On the one hand, a provider-driven approach, based on service description languages, attributes, and relationships between services was conceptualised. As well, a citizen-driven approach, based on analysing the outcomes from content identification and grouping workshops with citizens, was also conceptualised. Both methods were then applied and evaluated in practice. The conceptualisation of the provider-driven method for service bundling required the initial specification of relevant attributes that could be used to identify similarities between services called relationships; these relationships then formed the basis for the identification of service bundles. This study conceptualised and defined seven relationships, namely ‘Co-location’, ‘Resource’, ‘Co-occurrence’, ‘Event’, ‘Consumer’, ‘Provider’, and ‘Type’. The relationships, and the bundling method itself, were applied and refined as part of six Action Research cycles in collaboration with the Queensland Government. The findings show that attributes and relationships can be used effectively as a means for bundle identification, if distinct decision rules are in place to prescribe how services are to be identified. For the conceptualisation of the citizen-driven method, insights from the case studies led to the decision to involve citizens, through card sorting activities. Based on an initial list of services, relevant for a certain franchise, participating citizens grouped services according to their liking. The card sorting activity, as well as the required analysis and aggregation of the individual card sorting results, was analysed in depth as part of this study. A framework was developed that can be used as a decision-support tool to assist with the decision of what card sorting analysis method should be utilised in a given scenario. The characteristic features associated with card sorting in a government context led to the decision to utilise statistical analysis approaches, such as cluster analysis and factor analysis, to aggregate card sorting results. The second research question asks how the quality of service bundles can be assessed. An extensive literature review was conducted focussing on bundle, portal, and e-service quality. It was found that different studies use different constructs, terminology, and units of analysis, which makes comparing these models a difficult task. As a direct result, a framework was conceptualised, that can be used to position past and future studies in this research domain. Complementing the literature review, interviews conducted as part of the case studies with leaders in e-government, indicated that, typically, satisfaction is evaluated for the overall portal once the portal is online, but quality tests are not conducted during the development phase. Consequently, a research model which appropriately defines perceived service bundle quality would need to be developed from scratch. Based on existing theory, such as Theory of Reasoned Action, Expectation Confirmation Theory, and Theory of Affordances, perceived service bundle quality was defined as an inferential belief. Perceived service bundle quality was positioned within the nomological net of services. Based on the literature analysis on quality, and on the subsequent work of a focus group, the hypothesised antecedents (descriptive beliefs) of the construct and the associated question items were defined and the research model conceptualised. The model was then tested, refined, and finally validated during six Action Research cycles. Results show no significant difference in higher quality or higher satisfaction among users for either the provider-driven method or for the citizen-driven method. The decision on which method to choose, it was found, should be based on contextual factors, such as objectives, resources, and the need for visibility. The constructs of the bundle quality model were examined. While the quality of bundles identified through the citizen-centric approach could be explained through the constructs ‘Navigation’, ‘Ease of Understanding’, and ‘Organisation’, bundles identified through the provider-driven approach could be explained solely through the constructs ‘Navigation’ and ‘Ease of Understanding’. An active labelling style for bundles, as part of the provider-driven Information Architecture, had a larger impact on ‘Quality’ than the topical labelling style used in the citizen-centric Information Architecture. However, ‘Organisation’, reflecting the internal, logical structure of the Information Architecture, was a significant factor impacting on ‘Quality’ only in the citizen-driven Information Architecture. Hence, it was concluded that active labelling can compensate for a lack of logical structure. Further studies are needed to further test this conjecture. Such studies may involve building alternative models and conducting additional empirical research (e.g. use of an active labelling style for the citizen-driven Information Architecture). This thesis contributes to the body of knowledge in several ways. Firstly, it presents an empirically validated model of the factors explaining and predicting a citizen’s perception of service bundle quality. Secondly, it provides two alternative methods that can be used by governments to identify service bundles in structuring the content of a One-Stop Portal. Thirdly, this thesis provides a detailed narrative to suggest how the recent paradigm shift in the public domain, towards a citizen-centric focus, can be pursued by governments; the research methodology followed by this study can serve as an exemplar for governments seeking to achieve a citizen-centric approach to service delivery.

Strain-induced morphological evolution and preferential interdiffusion in SiGe epitaxial film on Si(100) during high-temperature annealing

Strain relaxation in initially flat SiGe film on Si(1 0 0) during rapid thermal annealing is studied. The surface roughens after high-temperature annealing, which has been attributed to the intrinsic strain in the epilayers. It is interesting to find that high-temperature annealing also results in roughened interface, indicating the occurrence of preferential interdiffusion. It is suggested that the roughening at the surface makes the intrinsic strain in the epilayer as well as the substrate unequally distributed, causing preferential interdiffusion at the SiGe/Si interface during high-temperature annealing. (C) 1999 Elsevier Science B.V. All rights reserved.

Cu2ZnSnS4 absorber layers obtained through sulphurization of metallic precursors: Graphite box versus sulphur flux

In this work we employed a hybrid method, combining RF-magnetron sputtering with evaporation, for the deposition of tailor made metallic precursors, with varying number of Zn/Sn/Cu (ZTC) periods and compared two approaches to sulphurization. Two series of samples with 1×, 2× and 4× ZTC periods have been prepared. One series of precursors was sulphurized in a tubular furnace directly exposed to a sulphur vapour and N2+5% H2 flux at a pressure of 5.0×10+4 Pa. A second series of identical precursors was sulphurized in the same furnace but inside a graphite box where sulphur pellets have been evaporated again in the presence of N2+5% H2 and at the same pressure as for the sulphur flux experiments. The morphological and chemical analyses revealed a small grain structure but good average composition for all three films sulphurized in the graphite box. As for the three films sulphurized in sulphur flux grain growth was seen with the increase of the number of ZTC periods whilst, in terms of composition, they were slightly Zn poor. The films' crystal structure showed that Cu2ZnSnS4 is the dominant phase. However, in the case of the sulphur flux films SnS2 was also detected. Photoluminescence spectroscopy studies showed an asymmetric broad band emission whichoccurs in the range of 1–1.5 eV. Clearly the radiative recombination efficiency is higher in the series of samples sulphurized in sulphur flux. We have found that sulphurization in sulphur flux leads to better film morphology than when the process is carried out in a graphite box in similar thermodynamic conditions. Solar cells have been prepared and characterized showing a correlation between improved film morphology and cell performance. The best cells achieved an efficiency of 2.4%.

Morphological and fecundity traits of Culex mosquitoes caught in gravid traps in urban and rural Berkshire, UK

Culex pipiens s.l. is one of the primary vectors of West Nile Virus in the USA and Continental Europe. The seasonal abundance and eco-behavioural characteristics of the typical form, Cx. pipiens pipiens, make it a key putative vector in Britain. Surveillance of Culex larvae and adults is essential to detect any changes to spatial and seasonal activity or morphological traits that may increase the risk of disease transmission. Here we report the use of the modified Reiter gravid box trap, which is commonly used in the USA but scarcely used in the UK, to assess its suitability as a tool for British female Culex mosquito surveillance. Trapping was carried out at 110 sites in urban and rural gardens in Berkshire in May, July and September 2013. We tested if reproductively active adult female Culex are more abundant in urban than rural gardens and if wing characteristic traits and egg raft size are influenced by location and seasonal variations. Gravid traps were highly selective for Culex mosquitoes, on average catching significantly more per trap in urban gardens (32.4 ± 6.2) than rural gardens (19.3 ± 4.0) and more in July than in May or September. The majority of females were caught alive in a good condition. Wing lengths were measured as an indicator of size. Females flying in September were significantly smaller than females in May or July. Further non-significant differences in morphology and fecundity between urban and rural populations were found that should be explored further across the seasons.

Flowering ecology of a Box-Ironbark Eucalyptus community

Box-Ironbark forests occur on the inland hills of the Great Dividing Range in Australia, from western Victoria to southern Queensland. These dry, open forests are characteristically dominated by Eucalyptus species such as Red Ironbark E. tricarpa, Mugga Ironbark E. sideroxylon and Grey Box E. microcarpa. Within these forests, several Eucalyptus species are a major source of nectar for the blossom-feeding birds and marsupials that form a distinctive component of the fauna. In Victoria, approximately 83% of the original pre - European forests of the Box-Ironbark region have been cleared, and the remaining fragmented forests have been heavily exploited for gold and timber. This exploitation has lead to a change in the structure of these forests, from one dominated by large 80-100 cm diameter, widely -spaced trees to mostly small (≥40 cm DBH), more densely - spaced trees. This thesis examines the flowering ecology of seven Eucalyptus species within a Box-Ironbark community. These species are characteristic of Victorian Box-Ironbark forests; River Red Gum E. camaldulensis, Yellow Gum E. leucoxylon, Red Stringybark E. macrorhyncha, Yellow Box E. melliodora, Grey Box E. microcarpa, Red Box E. polyanthemos and Red Ironbark E. tricarpa. Specifically, the topics examined in this thesis are: (1) the floral character traits of species, and the extent to which these traits can be associated with syndromes of bird or insect pollination; (2) the timing, frequency, duration, intensity, and synchrony of flowering of populations and individual trees; (3) the factors that may explain variation in flowering patterns of individual trees through examination of the relationships between flowering and tree-specific factors of individually marked trees; (4) the influence of tree size on the flowering patterns of individually marked trees, and (5) the spatial and temporal distribution of the floral resources of a dominant species, E. tricarpa. The results are discussed in relation to the evolutionary processes that may have lead to the flowering patterns, and the likely effects of these flowering patterns on blossom-feeding fauna of the Box-Ironbark region. Flowering observations were made for approximately 100 individually marked trees for each species (a total of 754 trees). The flower cover of each tree was assessed at a mean interval of 22 (+ 0.6) days for three years; 1997, 1998 and 1999. The seven species of eucalypt each had characteristic flowering seasons, the timing of which was similar each year. In particular, the timing of peak flowering intensity was consistent between years. Other spatial and temporal aspects of flowering patterns for each species, including the percentage of trees that flowered, frequency of flowering, intensity of flowering and duration of flowering, displayed significant variation between years, between forest stands (sites) and between individual trees within sites. All seven species displayed similar trends in flowering phenology over the study, such that 1997 was a relatively 'poor' flowering year, 1998 a 'good' year and 1999 an 'average' year in this study area. The floral character traits and flowering seasons of the seven Eucalyptus species suggest that each species has traits that can be broadly associated with particular pollinator types. Differences between species in floral traits were most apparent between 'summer' and 'winter' flowering species. Winter - flowering species displayed pollination syndromes associated with bird pollination and summer -flowering species displayed syndromes more associated with insect pollination. Winter - flowering E. tricarpa and E. leucoxylon flowers, for example, were significantly larger, and contained significantly greater volumes of nectar, than those of the summer flowering species, such as E. camaldulensis and E. melliodom. An examination of environmental and tree-specific factors was undertaken to investigate relationships between flowering patterns of individually marked trees of E. microcarpa and E. tricarpa and a range of measures that may influence the observed patterns. A positive association with tree-size was the most consistent explanatory variable for variation between trees in the frequency and intensity of flowering. Competition from near-neighbours, tree health and the number of shrubs within the canopy area were also explanatory variables. The relationship between tree size and flowering phenology was further examined by using the marked trees of all seven species, selected to represent five size-classes. Larger trees (≥40 cm DBH) flowered more frequently, more intensely, and for a greater duration than smaller trees. Larger trees provide more abundant floral resources than smaller trees because they have more flowers per unit area of canopy, they have larger canopies in which more flowers can be supported, and they provide a greater abundance of floral resources over the duration of the flowering season. Heterogeneity in the distribution of floral resources was further highlighted by the study of flowering patterns of E. tricarpa at several spatial and temporal scales. A total of approximately 5,500 trees of different size classes were sampled for flower cover along transects in major forest blocks at each of five sample dates. The abundance of flowers varied between forest blocks, between transects and among tree size - classes. Nectar volumes in flowers of E. tricarpa were sampled. The volume of nectar varied significantly among flowers, between trees, and between forest stands. Mean nectar volume per flower was similar on each sample date. The study of large numbers of individual trees for each of seven species was useful in obtaining quantitative data on flowering patterns of species' populations and individual trees. The timing of flowering for a species is likely to be a result of evolutionary selective forces tempered by environmental conditions. The seven species' populations showed a similar pattern in the frequency and intensity of flowering between years (e.g. 1998 was a 'good' year for most species) suggesting that there is some underlying environmental influence acting on these aspects of flowering. For individual trees, the timing of flowering may be influenced by tree-specific factors that affect the ability of each tree to access soil moisture and nutrients. In turn, local weather patterns, edaphic and biotic associations are likely to influence the available soil moisture. The relationships between the timing of flowering and environmental conditions are likely to be complex. There was no evidence that competition for pollinators has a strong selective influence on the timing of flowering. However, as there is year-round flowering in this community, particular types of pollinators may be differentiated along a temporal gradient (e.g. insects in summer, birds in winter). This type of differentiation may have resulted in the co-evolution of floral traits and pollinator types, with flowers displaying adaptations that match the morphologies and energy requirements of the most abundant pollinators in any particular season. Spatial variation in flowering patterns was evident at several levels. This is likely to occur because of variation in climate, weather patterns, soil types, degrees of disturbance and biotic associations, which vary across the Box-Ironbark region. There was no consistency among sites between years in flowering patterns suggesting that factors affecting flowering at this level are complex. Blossom-feeding animals are confronted with a highly spatially and temporally patchy resource. This patchiness has been increased with human exploitation of these forests leading to a much greater abundance of small trees and fewer large trees. Blossom-feeding birds are likely to respond to this variation in different ways, depending upon diet-breadth, mobility and morphological and behavioural characteristics. Future conservation of the blossom-feeding fauna of Box-Ironbark forests would benefit from the retention of a greater number of large trees, the protection and enhancement of existing remnants, and revegetation with key species, such as E. leucoxylon, E. microcarpa and E. tricarpa. The selective clearing of summer flowering species, which occur on the more fertile areas, may have negatively affected the year-round abundance and distribution of floral resources. The unpredictability of the spatial distribution of flowering patches within the region means that all remnants are likely to be important foraging areas in some years.

Molecular and morphological data support the existence of a sexual cycle in species of the genus Paracoccidioides

The genus Paracoccidioides includes the thermodimorphic species Paracoccidioides brasiliensis and P. lutzii, both of which are etiologic agents of paracoccidioidomycosis, a systemic mycosis that affects humans in Latin America. Despite the common occurrence of a sexual stage among closely related fungi, this has not been observed with Paracoccidioides species, which have thus been considered asexual. Molecular evolutionary studies revealed recombination events within isolated populations of the genus Paracoccidioides, suggesting the possible existence of a sexual cycle. Comparative genomic analysis of all dimorphic fungi and Saccharomyces cerevisiae demonstrated the presence of conserved genes involved in sexual reproduction, including those encoding mating regulators such as MAT, pheromone receptors, pheromone-processing enzymes, and mating signaling regulators. The expression of sex-related genes in the yeast and mycelial phases of both Paracoccidioides species was also detected by realtime PCR, with nearly all of these genes being expressed preferentially in the filamentous form of the pathogens. In addition, the expression of sex-related genes was responsive to the putative presence of pheromone in the supernatants obtained from previous cocultures of strains of two different mating types. In vitro crossing of isolates of different mating types, discriminated by phylogenetic analysis of the α-box (MAT1-1) and the high-mobility-group (HMG) domain (MAT1-2), led to the identification of the formation of young ascocarps with constricted coiled hyphae related to the initial stage of mating. These genomic and morphological analyses strongly support the existence of a sexual cycle in species of the genus Paracoccidioides. © 2013, American Society for Microbiology.

An ancestral MADS-box gene duplication occurred before the divergence of plants and animals

Changes in genes encoding transcriptional regulators can alter development and are important components of the molecular mechanisms of morphological evolution. MADS-box genes encode transcriptional regulators of diverse and important biological functions. In plants, MADS-box genes regulate flower, fruit, leaf, and root development. Recent sequencing efforts in Arabidopsis have allowed a nearly complete sampling of the MADS-box gene family from a single plant, something that was lacking in previous phylogenetic studies. To test the long-suspected parallel between the evolution of the MADS-box gene family and the evolution of plant form, a polarized gene phylogeny is necessary. Here we suggest that a gene duplication ancestral to the divergence of plants and animals gave rise to two main lineages of MADS-box genes: TypeI and TypeII. We locate the root of the eukaryotic MADS-box gene family between these two lineages. A novel monophyletic group of plant MADS domains (AGL34 like) seems to be more closely related to previously identified animal SRF-like MADS domains to form TypeI lineage. Most other plant sequences form a clear monophyletic group with animal MEF2-like domains to form TypeII lineage. Only plant TypeII members have a K domain that is downstream of the MADS domain in most plant members previously identified. This suggests that the K domain evolved after the duplication that gave rise to the two lineages. Finally, a group of intermediate plant sequences could be the result of recombination events. These analyses may guide the search for MADS-box sequences in basal eukaryotes and the phylogenetic placement of new genes from other plant species.

Specific morphological features predictive for the basal phenotype in grade 3 invasive ductal carcinoma of breast

Aims: Cytokeratin (CK) 14, a myoepithelial marker, is also expressed in a proportion of breast carcinomas. There is evidence that these tumours show a differing metastatic pattern and clinical outcome from other invasive ductal carcinomas (IDCs) and may need different management. Currently, they are not identified in routine practice and no morphological guidelines exist to aid their identification. The aim of this study was to analyse the histological features of CK14+ IDC. Methods and results: A detailed histological review of 453 grade 3 IDCs revealed 88 (19.4%) that expressed CK14. Assessment was made independently by two pathologists using a standardized 'tick-box' proforma covering grade, architectural and cytological features. The results were analysed using logistic regression to identify features that predicted for basal phenotype. Concordance between the two pathologists was fair to good for most parameters (kappa 0.4-0.6). On multiple logistic regression, the basal phenotype was highly significantly associated with the presence of a central scar (P = 0.005), tumour necrosis (P < 0.0001), presence of spindle cells (P = 0.006) or squamous metaplasia (P < 0.0001), high total mitotic count (> 40 per 10 high-power field) (P = 0.0002) and high nuclear-cytoplasmic ratio (P = 0.0002). Conclusions: Specific morphological features are strongly associated with basal-like breast carcinoma. These could be used in routine diagnostic practice to identify this important subset of tumours.

Sound radiation characteristics of a box-type structure

The finite element and boundary element methods are employed in this study to investigate the sound radiation characteristics of a box-type structure. It has been shown [T.R. Lin, J. Pan, Vibration characteristics of a box-type structure, Journal of Vibration and Acoustics, Transactions of ASME 131 (2009) 031004-1–031004-9] that modes of natural vibration of a box-type structure can be classified into six groups according to the symmetry properties of the three panel pairs forming the box. In this paper, we demonstrate that such properties also reveal information about sound radiation effectiveness of each group of modes. The changes of radiation efficiencies and directivity patterns with the wavenumber ratio (the ratio between the acoustic and the plate bending wavenumbers) are examined for typical modes from each group. Similar characteristics of modal radiation efficiencies between a box structure and a corresponding simply supported panel are observed. The change of sound radiation patterns as a function of the wavenumber ratio is also illustrated. It is found that the sound radiation directivity of each box mode can be correlated to that of elementary sound sources (monopole, dipole, etc.) at frequencies well below the critical frequency of the plates of the box. The sound radiation pattern on the box surface also closely related to the vibration amplitude distribution of the box structure at frequencies above the critical frequency. In the medium frequency range, the radiated sound field is dominated by the edge vibration pattern of the box. The radiation efficiency of all box modes reaches a peak at frequencies above the critical frequency, and gradually approaches unity at higher frequencies.

Mobiles In-a-Box : Reflections on Developing a Toolkit with Grassroots Human Rights Advocates

In 2008 Tactical Tech published 'Mobiles in-a-box': a toolkit designed to help human rights organisations and advocates use mobile technology in their work in Africa. This chapter reflects on the participatory development process used to develop the toolkit.