Certificate for Five Shares of Common Stock in Lincoln Manufacturing Company Limited

Certificate for 5 shares of common stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 10, 1923.

Certificate for Ten Shares of Accumulative Preference Capital Stock in Lincoln Manufacturing Company Limited

Certificate for 10 shares of accumulative preference capital stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 10, 1923.

Certificate for Twenty Shares of Accumulative Preference Capital Stock in Lincoln Manufacturing Company Limited

Certificate for 20 shares of accumulative preference capital stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 14, 1923.

Certificate for Twenty-Five Shares of Common Stock in Lincoln Manufacturing Company, Limited

Certificate for 25 shares of common in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 14, 1923.

Certificate for Ten Shares of Accumulative Preference Shares of Capital Stock in Lincoln Manufacturing Company Limited

Certificate for 10 shares of accumulative preference shares of capital stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, July 4, 1923.

A. S. Whiting Manufacturing Company Limited, minute book, 1872-1909.

The Cedar Dale Scythe Works was the second manufacturing company that A.S. Whiting had established in Oshawa, the first being the Oshawa Manufacturing Co. in 1852. The Oshawa Manufacturing Co. was eventually taken over by the Joseph Hall Works in 1857. In 1862, the Cedar Dale Works was built after being in a rented space in the Hall Works for two years, building scythes and hoes. With the building of the firm, the village of Cedar Dale was established. In 1867, the firm became Whiting and Cowan when John Cowan bought into the company. After the death of Whiting in 1867, his son-in-law, R.S. Hamlin headed the company. By 1872, it became the A.S. Whiting Manufacturing Co. when Cowan withdrew from the business. Before Whiting’s death, the company had been profitable but due to new machinery being developed, hand tools were becoming obsolete and the business only lasted for a few more years (source: Oshawa Community Museum and Archives Web site).

Niagara-Welland Power Company Limited fonds, 1833, 1852, 1904-1906, 1909, n.d.

The Welland Power and Supply Canal Company Limited, established in 1893 and incorporated in 1894 with a capital stock of $500,000. The aim of the company was to harness the natural water supply of the Niagara and Welland Rivers. In 1898 the Canadian Electrical News published a report by Henry Symons, QC outlining the main project of the company. This project involves the construction of a canal from the Welland River to the brow of the mountain at Thorold, a distance of 8 miles; the construction at Thorold of a power house, and from Thorold to Lake Ontario, a raceway by which to carry water into the lake. The estimate for the machinery to generate 100,000 horse power is £125,000; for transmission line to Toronto at a voltage of 10,000….The total estimate therefore amounts to £2,452,162, or roughly speaking, $12,000,000. Source: Canadian Electrical News, August 1898, p. 172. In 1899 the company officers petitioned the federal government desiring a name change to the Niagara-Welland Power Company Limited. Officers of the company were Harry Symons, President; Charles A. Hesson, Vice-President; and M.R. O’Loughlin, James B. Sheehan, James S. Haydon, Frederick K. Foster, directors; John S. Campbell, secretary-treasurer. The company’s head offices were located in St. Catharines, with a New York (City) office on Broad Street. In 1905 and 1909 the company petitioned the federal government for additional time to construct its works, which was granted. The company had until May 16, 1915 to complete construction. John S. Campbell (1860-1950) was a graduate of the University of Toronto and Osgoode Hall. During his university years John began his military career first in "K" Company, Queens Own rifles and then later as Commanding Officer of the 19th Lincoln Regiment, from 1906 to 1910. Upon his return to St. Catharines John Campbell served as secretary in the St. Catharines Garrison Club, a social club for military men begun in 1899. After being called to the Bar, he became a partner in the firm of Campbell and McCarron and was appointed to the bench in 1916, serving until retirement in 1934. Judge Campbell served as an alderman for several terms and was the mayor of St. Catharines in 1908 and 1909. He also served as the first chairman of the St. Catharines Public Utilities in 1914. John S. Campbell was married to Elizabeth Oille, daughter of Jerome B. and Charlotte (St. John) Oille. The family home "Cruachan" was located at 32 Church St.

Assembly line balancing the comparison of COMSOAL and MSNSH technique in Motorcycle manufacturing company

Today’s highly competitive market influences the manufacturing industry to improve their production systems to become the optimal system in the shortest cycle time as possible. One of most common problems in manufacturing systems is the assembly line balancing problem. The assembly line balancing problem involves task assignments to workstations with optimum line efficiency. The line balancing technique, namely “COMSOAL”, is an abbreviation of “Computer Method for Sequencing Operations for Assembly Lines”. Arcus initially developed the COMSOAL technique in 1966 [1], and it has been mainly applied to solve assembly line balancing problems [6]. The most common purposes of COMSOAL are to minimise idle time, optimise production line efficiency, and minimise the number of workstations. Therefore, this project will implement COMSOAL to balance an assembly line in the motorcycle industry. The new solution by COMSOAL will be used to compare with the previous solution that was developed by Multi‐Started Neighborhood Search Heuristic (MSNSH), which will result in five aspects including cycle time, total idle time, line efficiency, average daily productivity rate, and the workload balance. The journal name “Optimising and simulating the assembly line balancing problem in a motorcycle manufacturing company: a case study” will be used as the case study for this project [5].

Humberstone Shoe Company Limited Minute Book

Book contains meeting minutes of the Board of Directors of the Humberstone Shoe Company Ltd., held at the Office of McLeod, Young, Weir and Co. Limited, Metropolitan Building, Toronto. Board of Directors includes: H.H. Knoll (President), J.H. Radcliffe, E. K. Reiner, T.H. Kinnear, L.B. Spencer. There is some correspondence, annual reports, contracts, by-laws, statements of profit and loss etc. throughout the book.

Ontario Paper Company Limited

On February 29, 1912 The Ontario Paper Company Limited was incorporated under the leadership of Col. Robert R. McCormick. Four months later construction began in Thorold, Ontario as this location was best for the abundance of power and water and water transportation. The first machine was started at the mill on September 5, 1913. The mill was one of the most advanced of its era, using electricity instead of water power. The mill was also the first of its kind as it combined pulp and paper making instead of separating the two operations.

Quebec North Shore Paper Company Limited fonds

The Q.N.S. [Quebec North Shore Paper Company] newsprint mill started in 1937 at Baie Comeau in Quebec. Being the first major industry in that area at the time, harbour facilities, a power station and an entire community was built around the mill. In 1952, a power station was built at the first falls of the Manicouagan River. The station generated much more power than necessary for the mill, but attracted an aluminum smelter a few years later in 1958.

James D. Tait Company Limited Fonds, 1890-1939 [non-inclusive]

James D. Tait (1836-1907) came to Canada in 1855 from Scotland. He worked in the dry goods business until he established the James D. Tait Company in 1864. The business was first located on Ontario street and specialized in furs. The business expanded to include dry goods and dress-making. After the building was destroyed by fire, Tait established and expanded the business into the Prendergast building on the corner of St. Paul and William Streets. James D. Tait died in 1907 while on vacation in Muskoka. In 1912 upon the resignation (or removal) of Benjamin Brick and Arthur Harbour, Stanley G. Smith joins the company as a director and secretary-treasurer. 1918/1919 vice-president E.J. Dignum dies. 1919 S.J. Inksater becomes a director of the company (His stock was purchased by the J.D. Tait Co.) By the 1930s the business, still in the same location, was under the leadership of Malcolm Stobie, President, Samuel J. Inksater, Vice-President and Stanley G. Smith, Secretary-Treasurer. The James D. Tait Company Limited ceased operations on 17 August 1933. The 1935 St. Catharines city directory records John Stobie, a former manager of the James D. Tait Company, operating a dry goods business at the same location, but with one-third the size of the original store space.

O.S. Rixford Manufacturing Company corporate stock book, 1883-1898.

Around 1837, Luther Rixford founded a tool manufacturing business (originally known as the Luther Rixford Manufacturing Co.) in East Highgate, Vermont, that specialized in manufacturing scythes and other agricultural tools. A branch of this business was established in Upper Bedford, Quebec, around the late 1840's. Subsequent generations of the Rixford family took over the operations of both facilities, and in 1857 Oscar S. Rixford renamed the company the O.S. Rixford Manufacturing Co. The company was incorporated in 1883. Around 1920, the O.S. Rixford Manufacturing Company (of Canada) was acquired by Welland Vale Manufacturing, in St. Catharines, Ontario. The Rixford Company in Vermont continued operations until 1956, when decreasing demand for the tools they manufactured caused them to close their doors.