Association and liquid structure of pyridine-acetic acid mixtures determined from neutron scattering using a ‘free proton’ EPSR simulation model

The liquid structure of pyridine-acetic acid mixtures have been investigated using neutron scattering at various mole fractions of acetic acid, χHOAc = 0.33, 0.50, and 0.67, and compared to the structures of neat pyridine and acetic acid. Data has been modelled using Empirical Potential Structure Refinement (EPSR) with a ‘free proton’ reference model, which has no prejudicial weighting towards either the existence of molecular or ionised species. Analysis of the neutron scattering results shows the existence of hydrogen-bonded acetic acid chains with pyridine inclusions, rather than the formation of an ionic liquid by proton transfer.

Cytenamide acetic acid solvate

In the crystal structure of the title compound (systematic name: 5H-dibenzo[a,d]cycloheptatriene-5-carboxamide ethanoic acid solvate), C16H13NO center dot C2H4O2, the cytenamide and solvent molecules form a hydrogen-bonded R-2(2)(8) dimer motif, which is further connected to form a centrosymmetric double ring motif arrangement. The cycloheptene ring adopts a boat conformation and the dihedral angle between the least-squares planes through the two aromatic rings is 54.7 (2)degrees.

Formation of isopolyoxometallate(VI) anions in the reaction between M(CO)6 (M = W, Mo) and acetic acid: X-ray crystal structure of [W3(μ3-O)2(μ2η2-O2CCH3)6(H2O)3]2[W10O32·solvent

W(CO)6 reacts with a mixture of acetic acid/acetic anhydride to give [W3 (μ3-O)2(μ2η2-O2CCH3)6(H2O)3](CH3CO2)2 (1), which was converted by HClO4 to [W3 (μ3-O)2(μ2η2-O2CCH3)6(H2O)3](ClO4)2 (2). Addition of CH3CO2Na to the above reaction mixture, and prolonged exposure of the solution to air, results in the formation of the WIV/WVI complex salt [W3(μ3-O)2(μ2η2-O2CCH3)6(H2O)3]2[W10O32]·solvent (3). Complex 3 was also prepared by reacting 1 with Na2WO4·2H2O in acetic acid, and it has been characterized by X-ray crystallography. Addition of [CH3(CH2)3]4N(ClO4) to the reaction filtrate remaining after the preparation of [Mo2(μ-O2CCH3)4][from Mo(CO)6, CH3CO2H and (CH3CO)2O], followed by exposure to air, gives ([CH3(CH2)3]4N)2[Mo6O19] (4).

Quantitative structure of an acetate dye molecule analogue at the TiO2- acetic acid interface

The positions of atoms in and around acetate molecules at the rutile TiO2(110) interface with 0.1 M acetic acid have been determined with a precision of ±0.05 Å. Acetate is used as a surrogate for the carboxylate groups typically employed to anchor monocarboxylate dye molecules to TiO2 in dye-sensitised solar cells (DSSC). Structural analysis reveals small domains of ordered (2 x 1) acetate molecules, with substrate atoms closer to their bulk terminated positions compared to the clean UHV surface. Acetate is found in a bidentate bridge position, binding through both oxygen atoms to two five-fold titanium atoms such that the molecular plane is along the [001] azimuth. Density functional theory calculations provide adsorption geometries in excellent agreement with experiment. The availability of these structural data will improve the accuracy of charge transport models for DSSC.

Versatile microanalytical system with porous polypropylene capillary membrane for calibration gas generation and trace gaseous pollutants sampling applied to the analysis of formaldehyde, formic acid, acetic acid and ammonia in outdoor air

The analytical determination of atmospheric pollutants still presents challenges due to the low-level concentrations (frequently in the mu g m(-3) range) and their variations with sampling site and time In this work a capillary membrane diffusion scrubber (CMDS) was scaled down to match with capillary electrophoresis (CE) a quick separation technique that requires nothing more than some nanoliters of sample and when combined with capacitively coupled contactless conductometric detection (C(4)D) is particularly favorable for ionic species that do not absorb in the UV-vis region like the target analytes formaldehyde formic acid acetic acid and ammonium The CMDS was coaxially assembled inside a PTFE tube and fed with acceptor phase (deionized water for species with a high Henry s constant such as formaldehyde and carboxylic acids or acidic solution for ammonia sampling with equilibrium displacement to the non-volatile ammonium ion) at a low flow rate (8 3 nLs(-1)) while the sample was aspirated through the annular gap of the concentric tubes at 25 mLs(-1) A second unit in all similar to the CMDS was operated as a capillary membrane diffusion emitter (CMDE) generating a gas flow with know concentrations of ammonia for the evaluation of the CMDS The fluids of the system were driven with inexpensive aquarium air pumps and the collected samples were stored in vials cooled by a Peltier element Complete protocols were developed for the analysis in air of NH(3) CH(3)COOH HCOOH and with a derivatization setup CH(2)O by associating the CMDS collection with the determination by CE-C(4)D The ammonia concentrations obtained by electrophoresis were checked against the reference spectrophotometric method based on Berthelot s reaction Sensitivity enhancements of this reference method were achieved by using a modified Berthelot reaction solenoid micro-pumps for liquid propulsion and a long optical path cell based on a liquid core waveguide (LCW) All techniques and methods of this work are in line with the green analytical chemistry trends (C) 2010 Elsevier B V All rights reserved

The influence of acetic acid on the ethanol electrooxidation on a platinum electrode

In the presented work, the evaluation of the influence of acetic acid in the electrochemical environment on the ethanol electro-oxidation reaction on a polycrystalline platinum electrode is presented for the first time. Using cyclic voltammetry. chronoamperometry and in situ Fourier Transformed IR spectroscopy (FTIR) it was demonstrated that an inhibition of the ethanol oxidation reaction occurs for bulk acetic acid concentrations of the order 0.1 mu mol L(-1) -5 mmol L(-1). This inhibition effect is related to the decrease of CO(2) and acetaldehyde production as confirmed by spectroscopic results. (C) 2011 Elsevier B.V. All rights reserved.

An Improved Procedure for the Preparation of [Bis(2,2,2-trifluoroethyl)phosphono]acetic Acid

A different and improved procedure for the preparation of [bis(2,2,2-trifluoroethyl)phosphono]acetic acid in just one step from bis(2,2,2-trifluoroethyl)phosphonate is described. The protocol employs a Michaelis-Becker reaction between commercially available bis(2,2,2-trifluoroethyl) phosphonate and bromoacetic acid, furnishing [bis(2,2,2-trifluoroethyl)phosphono]acetic acid in 50-54% yield.

Vascular attack by 5,6-dimethylxanthenone-4-acetic acid combined with B7.1 (CD80)-mediated immunotherapy overcomes immune resistance and leads to the eradication of large tumors and multiple tumor foci

The promise of cancer immunotherapy is that it will not only eradicate primary tumors but will generate systemic antitumor immunity capable of destroying distant metastases. A major problem that must first be surmounted relates to the immune resistance of large tumors. Here we reveal that immune resistance can be overcome by combining immunotherapy with a concerted attack on the tumor vasculature. The functionally related antitumor drugs 5,6-dimethylxanthenone-4-acetic acid (DMXAA) and flavone acetic acid (FAA), which cause tumor vasculature collapse and tumor necrosis, were used to attack the tumor vasculature, whereas the T-cell costimulator B7.1 (CD80), which costimulates T-cell proliferation via the CD28 pathway, was used to stimulate antitumor immunity. The injection of cDNA (60–180 µg) encoding B7.1 into large EL-4 tumors (0.8 cm in diameter) established in C57BL/6 mice, followed 24 h later by i.p. administration of either DMXAA (25 mg/kg) or FAA (300 mg/kg), resulted in complete tumor eradication within 2–6 weeks. In contrast, monotherapies were ineffective. Both vascular attack and B7.1 immunotherapy led to up-regulation of heat shock protein 70 on stressed and dying tumor cells, potentially augmenting immunotherapy. Remarkably, large tumors took on the appearance of a wound that rapidly ameliorated, leaving perfectly healed skin. Combined therapy was mediated by CD8+ T cells and natural killer cells, accompanied by heightened and prolonged antitumor cytolytic activity (P < 0.001), and by a marked increase in tumor cell apoptosis. Cured animals completely rejected a challenge of 1 x 107 parental EL-4 tumor cells but not a challenge of 1 x 104 Lewis lung carcinoma cells, demonstrating that antitumor immunity was tumor specific. Adoptive transfer of 2 x 108 splenocytes from treated mice into recipients bearing established (0.8 cm in diameter) tumors resulted in rapid and complete tumor rejection within 3 weeks. Although DMXAA and B7.1 monotherapies are complicated by a narrow range of effective doses, combined therapy was less dosage dependent. Thus, a broad range of amounts of B7.1 cDNA were effective in combination with 25 mg/kg DMXAA. In contrast, DMXAA, which has a very narrow range of high active doses, was effective at a low dose (18 mg/kg) when administered with a large amount (180 µg) of B7.1 cDNA. Importantly, combinational therapy generated heightened antitumor immunity, such that gene transfer of B7.1 into one tumor, followed by systemic DMXAA treatment, led to the complete rejection of multiple untreated tumor nodules established in the opposing flank. These findings have important implications for the future direction and utility of cancer immunotherapies aimed at harnessing patients’ immune responses to their own tumors.

Use of anaerobic cecal microflora, lactose and acetic acid for the protection of broiler chicks against experimental infection with Salmonella Typhimurium and Salmonella enteritidis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Studies of gastric mucosa regeneration and safety promoted by Mouriri pusa treatment in acetic acid ulcer model

Ethnopharmacological Relevance: Mouriri pusa Gardn. (Melastomataceae) is a medicinal plant commonly used by people living in the Cerrado to treat gastrointestinal disturbances. This medicinal plant has shown intense gastroprotective action in rodent gastric lesion, but still there are no data about its healing effect on gastric mucosa.Aim of the Study: To evaluate the methanolic extract (MeOH) obtained from Mouriri pusa leaves for its effect on the cicatrisation process of gastric ulcer.Mterials and Methods: The healing effects on gastric ulcers inducted by subserosal injection of acetic acid were evaluated by macroscopic and microscopic measures, imunohistochemistry and cell counting in rats treated with MeOH extract of Mouriri pusa (250 mg/kg, p.o./daily) for 14 or 30 days. The toxicity of Mouriri pusa was also evaluated by body and organ weight measure and clinical biochemical parameters.Results: Mouriri pusa treatments lasting 14 and 30 days showed elevated mucus secretion (PAS) and thicker regenerative gastric mucosa, denoting increased cell proliferation, which was confirmed by PCNA immunohistochemical analysis. Moreover, there was important cell recruitment (neutrophils and mast cells) to the site of the ulcer, which is an important factor in ulcer healing. No toxic effect was observed in all parameters evaluated. Phenolic compounds present in the MeOH extract like tannins, flavonoids and epicatechin are the probable agents involved in the healing effects of this medicinal plant.Conclusions: These findings showed a potential effect of Mouriri pusa in increasing regeneration of damaged gastric mucosa with safety for human use. (C) 2007 Elsevier B.V. All rights reserved.

Effects of ethanol, acetaldehyde, and acetic acid on histamine secretion in guinea pig lung mast cells

We studied the direct effects of ethanol and its metabolites on the guinea pig lung mast cell, and the alterations caused in the histamine release induced by different stimuli. Guinea pig lungs cells dispersed by collagenase were used throughout. High concentrations of ethanol (100 mg/ml), acetaldehyde (0.3-3 mg/ml) and acetic acid (3 mg/ml) induced histamine release that was not inhibited by sodium cyanide (0.3 mM). Lower concentration of ethanol (10 mg/ml) and acetic acid (0.3 mg/ml), but not acetaldehyde, inhibited the histamine release induced by antigen and ionophore A23187. The histamine release induced by phorbol 12-miristate 13-acetate (1 mu M) was also inhibited by ethanol (10 mg/ml). Changes in the levels of calcium, glucose and phosphatidic acid did not influence the effect of ethanol. We conclude that high doses of ethanol, acetaldehyde, and acetic acid cause a cytotoxic histamine release by independent mechanisms. Low concentrations of acetic acid inhibit the histamine release by pH reduction. Ethanol acts by a generalized effect that is independent of calcium and glucose suggesting a nonspecific effect that, nevertheless, is not cytotoxic since it can be reversed by washing the cells. (C) 2000 Elsevier B.V. All rights reserved.

Reaction pathway to the synthesis of anatase via the chemical modification of titanium isopropoxide with acetic acid

Anatase nanoparticles were obtained through a modified sol-gel route from titanium isopropoxide modified with acetic acid in order to control hydrolysis and condensation reactions. The modification of Ti(O(i)Pr)(4) with acetic acid reduces the availability of groups that hydrolyze and condense easily through the formation of a stable complex whose structure was determined to be Ti(OCOCH(3))(O(i)Pr)(2) by means of FTIR and (13)C NMR. The presence of this complex was confirmed with FTIR in the early stages of the process. A doublet in 1542 and 1440 cm(-1) stands for the asymmetric and symmetric stretching vibrations of the carboxylic group coordinated to Ti as a bidentate ligand. The gap of 102 cm(-1) between these signals suggests that acetate acts preferentially as a bidentate rather than as a bridging ligand between two titanium atoms. The use of acetic acid as modifier allows the control of both the degree of condensation and oligomerization of the precursor and leads to the preferential crystallization of TiO(2) in the anatase phase. A possible reaction pathway toward the formation of anatase is proposed on the basis of the intermediate species present in a 1:1 Ti(O(i)Pr)(4):CH(3)COOH molar system in which esterification reactions that introduce H(2)O into the reaction mixture were seen to be negligible. The Rietveld refinement and TEM analysis revealed that the powder is composed of isotropic anatase nanocrystallites.