Análise de viabilidade de injeção de fluidos alternativos ao vapor em reservatórios de óleo pesado

Many of hydrocarbon reserves existing in the world are formed by heavy oils (°API between 10 and 20). Moreover, several heavy oil fields are mature and, thus, offer great challenges for oil industry. Among the thermal methods used to recover these resources, steamflooding has been the main economically viable alternative. Latent heat carried by steam heats the reservoir, reducing oil viscosity and facilitating the production. This method has many variations and has been studied both theoretically and experimentally (in pilot projects and in full field applications). In order to increase oil recovery and reduce steam injection costs, the injection of alternative fluid has been used on three main ways: alternately, co-injected with steam and after steam injection interruption. The main objective of these injection systems is to reduce the amount of heat supplied to the reservoir, using cheaper fluids and maintaining the same oil production levels. This works discusses the use of carbon dioxide, nitrogen, methane and water as an alternative fluid to the steam. The analyzed parameters were oil recoveries and net cumulative oil productions. The reservoir simulation model corresponds to an oil reservoir of 100 m x 100 m x 28 m size, on a Cartesian coordinates system (x, y and z directions). It is a semi synthetic model with some reservoir data similar to those found in Brazilian Potiguar Basin. All studied cases were done using the simulator STARS from CMG (Computer Modelling Group, version 2009.10). It was found that waterflood after steam injection interruption achieved the highest net cumulative oil compared to other fluids injection. Moreover, it was observed that steam and alternative fluids, co-injected and alternately, did not present increase on profitability project compared with steamflooding

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Pirólise de borras oleosas de petroleo utilizando nanomateriais

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Estudo do comportamento de hidrocarboneto policíclico aromático em solos brasileiros de caráter vértico.

A maioria dos estudos envolvendo adsorção de hidrocarbonetos policíclicos aromáticos (HPA) é realizada em solos de regiões de clima frio. Como em países tropicais as características dos processos pedológicos e os solos resultantes são diferentes há necessidade desses estudos em solos brasileiros. Com esse objetivo, este trabalho estudou a adsorção de pireno em Argissolo, Neossolo Quartzarênico e Vertissolo. Verificou-se ainda que não foi somente o teor de matéria orgânica responsável pelo equilíbrio do processo de adsorção como esperado. A presença de argilas expansivas pode ter contribuição para o aumento da quantidade de pireno adsorvida no solo (Q), como foi verificado para o Vertissolo. Foi observado que as categorias de solos estudadas apresentam características físicoquímicas e Koc muito diferentes indicando que o processo de adsorção de pireno nestes solos não pode ser considerado como um modelo único.

Remediação do solo e da água: aspectos gerais.

Historicamente, o solo tem sido utilizado por gerações como receptor de substâncias resultantes da atividade humana. A partir da Revolução Industrial, a liberação descontrolada de poluentes para o ambiente e sua consequente acumulação no solo e nos aquíferos sofreu uma mudança drástica de forma e de intensidade, explicada pelo aumento do volume e dos tipos de resíduos gerados pelas atividades urbanas, industriais e agrícolas. Dentro deste contexto, o estudo das interações de diversos tipos de poluentes inorgânicos e orgânicos em solos, como forma de mitigar sua acumulação e possível impacto sobre a biota e as águas subterrâneas é fundamental.

Dynamic of polycyclic aromatic hydrocarbons in soils treated with biochar.

In recent years the interest in pyrogenic carbon for agricultural use (biochar, i.e. carbonized biomass for agricultural use) has sharply increased. However biochar contain dangerous compounds such as Polycyclic Aromatic Hydrocarbons (PAHs), many of them potentially carcinogenic and mutagenic. They are organic compounds formed from incomplete combustion of organic materials and are persistent pollutants. Therefore, PAHs concentrations and their dynamic must be evaluated in soils amended with biochar. For this, soil samples were collected in three experimental areas in different years (1, 3, 5 or 6) after the application of 0 (control) or 16 Mg ha-1 of biochar. This is the first report of PAHs persistence up to six years in soil treated with biochar. The biochar application increased total PAHs concentrations up to five years after the application, however the levels have always been an order of magnitude lower the limits of prevention established by International Environmental Agencies for soils. Thus, under the evaluated conditions ,the use of biochar was safe concerning PAHs contamination, besides, after six years of the application, the levels found were similar to the control treatment, making it possible to define a safe frequency of application based on the persistence of PAHs in soil.