Studies on the production management in the seafood processing industry in Kerala

Kerala was the pioneer in modern seafood processing and exporting. But now the industry is Iacingalot of problems due to low productivity and deterioration in the quality of the products. only about 17% of the installed freezing capacity in sea food processing industry was reported to be utilised during 1979-80. The price of the export commodities its decided by the buyers based on international supply and demand pattern and based on the strength and weakness of dollar/yen. The only way to increase the profitability of the processors is to reduce the cost of production to the possible extent. The individual processors find it difficult to continue in this field due to low productivity and quality problems. The main objectives of the research are to find out how the production is being managed in the seafood processing(freezing) 17industry in Kerala and the reasons for low productivity and poor quality of the products. The study includes a detailed analysis of Location of the factories. Layout Purchase, production and storage patterns. Production planning and scheduling. Work Measurement of the processing of important products. Quality Control and Inspection. Management Information System

What is outside? The early years foundation stage in England: outdoor facilities, organisation and staff attitudes

The purpose of this paper is to report on the facilities available, organisation of, and staff attitudes to early years outdoor education from schools within the south east of England, focusing on provision for children aged three to five. One component of the successful education of the child involves providing an ‘environment for learning’, including the facilities, layout and routines. This paper presents findings concerning the type and variety of facilities available outside; the various styles of organisation of the space; staff attitudes about: their roles, their aims for the environment, children’s behaviour and learning, and perceived drawbacks to practice. This paper draws on empirical data collected from schools within the University of Reading partnership. The findings suggest that although all early years settings must adhere to the statutory framework there are a range of facilities available, and there are a number of ways this environment is organised. Further there appears to be uncertainty about the adult role outside and the aims for activities. The conclusions drawn indicate that staff do not appear to be linking their aims for outdoor education to the facilities provided or to their actions outside. This means there is not a clear link between what staff provide outside and the declared ambitions for learning. This study is important as all educators need to be certain about their aims for education to ensure best outcomes for children. The implications of these findings for early years teachers are that they need to be able to articulate their aims for outdoor education and to provide the correct facilities to achieve these aims. Finally this study was undertaken to raise debate, posit questions and to ascertain the parameters for further research about the early years outdoor environment.

Assembly line balancing the comparison of COMSOAL and MSNSH technique in Motorcycle manufacturing company

Today’s highly competitive market influences the manufacturing industry to improve their production systems to become the optimal system in the shortest cycle time as possible. One of most common problems in manufacturing systems is the assembly line balancing problem. The assembly line balancing problem involves task assignments to workstations with optimum line efficiency. The line balancing technique, namely “COMSOAL”, is an abbreviation of “Computer Method for Sequencing Operations for Assembly Lines”. Arcus initially developed the COMSOAL technique in 1966 [1], and it has been mainly applied to solve assembly line balancing problems [6]. The most common purposes of COMSOAL are to minimise idle time, optimise production line efficiency, and minimise the number of workstations. Therefore, this project will implement COMSOAL to balance an assembly line in the motorcycle industry. The new solution by COMSOAL will be used to compare with the previous solution that was developed by Multi‐Started Neighborhood Search Heuristic (MSNSH), which will result in five aspects including cycle time, total idle time, line efficiency, average daily productivity rate, and the workload balance. The journal name “Optimising and simulating the assembly line balancing problem in a motorcycle manufacturing company: a case study” will be used as the case study for this project [5].

A mathematical model for assembly line balancing model to consider disordering sequence of workstations

Purpose – A binary integer programming model for the simple assembly line balancing problem (SALBP), which is well known as SALBP-1, was formulated more than 30 years ago. Since then, a number of researchers have extended the model for the variants of assembly line balancing problem.The model is still prevalent nowadays mainly because of the lower and upper bounds on task assignment. These properties avoid significant increase of decision variables. The purpose of this paper is to use an example to show that the model may lead to a confusing solution. Design/methodology/approach – The paper provides a remedial constraint set for the model to rectify the disordered sequence problem. Findings – The paper presents proof that the assembly line balancing model formulated by Patterson and Albracht may lead to a confusing solution. Originality/value – No one previously has found that the commonly used model is incorrect.

Dairy Farm Layout and Design: Building and Yard Design, Warm Climates

The current knowledge revised in this article describes a wide range of facilities in common use on dairy cattle farms in warm climates. A dairy cattle farm consists of several facilities, such as housing system, yards, manure pits, milking center, environmental protection structures, forage storage, and several machines for different facilities. Any facility design tends to be a compromise, often between many factors, and no single solution will be optimal for all concerned.

A new method for improving reliability and line loss in distribution networks

In this paper, both Distributed Generators (DG) and capacitors are allocated and sized optimally for improving line loss and reliability. The objective function is composed of the investment cost of DGs and capacitors along with loss and reliability which are converted to the genuine dollar. The bus voltage and line current are considered as constraints which should be satisfied during the optimization procedure. Hybrid Particle Swarm Optimization as a heuristic based technique is used as the optimization method. The IEEE 69-bus test system is modified and employed to evaluate the proposed algorithm. The results illustrate that the lowest cost planning is found by optimizing both DGs and capacitors in distribution networks.

Alice Burlin nee Molling, Therese Gottschalk nee Molling, and Line Stern nee Wallerstein at Alice Burlins's home; Linton near Cambridge, England.

Digital Image

Alice Burlin nee Molling, Therese Gottschalk nee Molling, and Line Stern nee Wallerstein at Alice Burlins's home; Linton near Cambridge, England.

Digital Image

Short-term survival of discarded pearl perch (Glaucosoma scapulare Ramsay, 1881) caught by hook-and-line in Queensland, Australia

Post-release survival of line-caught pearl perch (Glaucosoma scapulare) was assessed via field experiments where fish were angled using methods similar to those used by commercial, recreational and charter fishers. One hundred and eighty-three individuals were caught during four experiments, of which >91% survived up to three days post-capture. Hook location was found to be the best predictor of survival, with the survival of throat- or stomach-hooked pearl perch significantly (P < 0.05) lower than those hooked in either the mouth or lip. Post-release survival was similar for both legal (≥35 cm) and sub-legal (<35 cm) pearl perch, while those individuals showing no signs of barotrauma were more likely to survive in the short term. Examination of the swim bladders in the laboratory, combined with observations in the field, revealed that swim bladders rupture during ascent from depth allowing swim bladder gases to escape into the gut cavity. As angled fish approach the surface, the alimentary tract ruptures near the anus allowing swim bladder gases to escape the gut cavity. As a result, very few pearl perch exhibit barotrauma symptoms and no barotrauma mitigation strategies were recommended. The results of this study show that pearl perch are relatively resilient to catch-and-release suggesting that post-release mortality would not contribute significantly to total fishing mortality. We recommend the use of circle hooks, fished actively on tight lines, combined with minimal handling in order to maximise the post-release survival of pearl perch.

Short-term survival of discarded pearl perch (Glaucosoma scapulare Ramsay, 1881) caught by hook-and-line in Queensland, Australia

Post-release survival of line-caught pearl perch (Glaucosoma scapulare) was assessed via field experiments where fish were angled using methods similar to those used by commercial, recreational and charter fishers. One hundred and eighty-three individuals were caught during four experiments, of which >91 survived up to three days post-capture. Hook location was found to be the best predictor of survival, with the survival of throat- or stomach-hooked pearl perch significantly (P < 0.05) lower than those hooked in either the mouth or lip. Post-release survival was similar for both legal (≥35 cm) and sub-legal (<35 cm) pearl perch, while those individuals showing no signs of barotrauma were more likely to survive in the short term. Examination of the swim bladders in the laboratory, combined with observations in the field, revealed that swim bladders rupture during ascent from depth allowing swim bladder gases to escape into the gut cavity. As angled fish approach the surface, the alimentary tract ruptures near the anus allowing swim bladder gases to escape the gut cavity. As a result, very few pearl perch exhibit barotrauma symptoms and no barotrauma mitigation strategies were recommended. The results of this study show that pearl perch are relatively resilient to catch-and-release suggesting that post-release mortality would not contribute significantly to total fishing mortality. We recommend the use of circle hooks, fished actively on tight lines, combined with minimal handling in order to maximise the post-release survival of pearl perch.

Medication incident reporting in residential aged care facilities: Limitations and risks to residents' safety

Background Medication incident reporting (MIR) is a key safety critical care process in residential aged care facilities (RACFs). Retrospective studies of medication incident reports in aged care have identified the inability of existing MIR processes to generate information that can be used to enhance residents’ safety. However, there is little existing research that investigates the limitations of the existing information exchange process that underpins MIR, despite the considerable resources that RACFs’ devote to the MIR process. The aim of this study was to undertake an in-depth exploration of the information exchange process involved in MIR and identify factors that inhibit the collection of meaningful information in RACFs. Methods The study was undertaken in three RACFs (part of a large non-profit organisation) in NSW, Australia. A total of 23 semi-structured interviews and 62 hours of observation sessions were conducted between May to July 2011. The qualitative data was iteratively analysed using a grounded theory approach. Results The findings highlight significant gaps in the design of the MIR artefacts as well as information exchange issues in MIR process execution. Study results emphasized the need to: a) design MIR artefacts that facilitate identification of the root causes of medication incidents, b) integrate the MIR process within existing information systems to overcome key gaps in information exchange execution, and c) support exchange of information that can facilitate a multi-disciplinary approach to medication incident management in RACFs. Conclusions This study highlights the advantages of viewing MIR process holistically rather than as segregated tasks, as a means to identify gaps in information exchange that need to be addressed in practice to improve safety critical processes.

Generators contribution towards loads and line flows - A case study

n many parts of the world, the goal of electricity supply industries is always the introduction of competition and a lowering of the average consumer price. Because of this it has become much more important to be able to determine which generators are supplying a particular load, how much use each generator is making of a transmission line and what is generator's contribution to the system losses. In this paper a case study on generator contributions towards loads and transmission flows are illustrated with an equivalent 11-bus system, a part of Indian Southern Grid, based on the concepts of circuit flow directions, for normal and network contingency conditions.

Linewidths and line shapes in the vicinity of graphene

It is well known that graphene, by virtue of its pi-cloud delocalization, has a continuum of electronic energy states and thus behaves nearly like a metal. Instances involving quenching of electronic energy excitation in fluorophores placed in the proximity of graphene sheets are well documented. In this paper, we perform theoretical investigations on the broadening of vibrational and electronic transitions in the vicinity of graphene. We find that for CO vibrations in the vicinity of undoped graphene, the broadening at a distance of 5 angstrom is similar to 0.008 cm(-1)((kappa) over tilde = 2, (kappa) over tilde being the effective dielectric constant). In comparison, for electronic transitions, the linewidth is much larger, being of the order of several cm(-1). Also, if the transition dipole were parallel to the graphene sheet, the linewidth would be reduced to half the value for the case where it is perpendicular, an observation which should be easy to check experimentally for electronic transitions. This should be observable for the f - f transitions (which are rather narrow) of Lanthanide complexes placed within a distance of a few nanometers from a graphene sheet. Further the linewidth would have a (distance)(-4) dependence as one varies the distance from graphene. (C) 2014 AIP Publishing LLC.