In vitro cytotoxic and non-genotoxic effects of gutta-percha solvents on mouse lymphoma cells by single cell gel (comet) assay

Chloroform and eucalyptol are widely used in clinical dentistry as gutta-percha solvents. However, these compounds may represent a hazard to human health, especially by causing injury to genetic apparatus and/or inducing cellular death. In this study, the genotoxic and cytotoxic potentials associated with exposure to chloroform and eucalyptol were assessed on mouse lymphoma cells in vitro by the single cell gel (comet) assay and trypan blue exclusion test, respectively. Both gutta-percha solvents proved to be cytotoxic at the same levels in concentrations of 2.5, 5 and 10 μL/mL (p<0.05). On the other hand, neither of the solvents induced DNA breakage. Taken together, these results suggest that although both tested compounds (chloroform and eucalyptol) are strong cytotoxicants, it seems that they are not likely to increase the level of DNA damage on mammalian cells.

Atividade microbiana em um Latossolo degradado tratado com lodo de esgoto

The degraded soil shows, in general, poor biological activity, considering its physical characteristics, low fertility and organic matter, mainly due to removal or degradation of its superficial layer. The sewage sludge, due to its high content of easily decomposed organic matter can be an alternate source of organic residues and combined to its high content of the principal nutrients for the plants can be an important factor to promote biological activities in degraded soil. In order to study the actions of the sewage sludge in the recovery of a degraded Latosol, the carbon in the microbial biomass (C mic), the carbon released CO2 (C-CO2) and the relation between microbial and organic carbon (Cmic/Corg) were used as indicators of the effects. To do so, two doses (30 and 60 Mg ha-1) of sewer slime applied in topdressing and incorporated together with a mineral fertilizer treatment, using the eucalyptus as a test crop. A completely randomized design with 4 treatments and 4 repetitions was used. The sewage sludge promoted increase of liberated C-CO2 and the C mic, which constitute the adequate quality indicators for monitoring the soil recovery.

Enraizamento de plantas cultivadas in vitro

The adventitious rooting process of in vitro cultured plantlets is a technique that has been employed for the vegetative propagation of a significant number of native and exotic species. Many factors are associated with the rooting stage influencing positive and/or negatively the establishment of micropropagation protocols. The objective of this work was a literature review of the main inherent factors concerning in vitro rooting process including the correlation among others the endogenous and exogenous auxins levels, juvenility, genotype, mineral nutrition, culture medium conditions, addition of growth regulators and other substances as phenolic compounds and active coal besides growth environmental conditions of in vitro cultures. Although the complete elucidation of all processes involved with rooting of in vitro cultured plants has not been achieved so far, a comprehensive study of the main factors that interfere on rooting is fundamental for the establishment of new researches that might contribute for the rooting of economically important plants.

Osteologia craniana de Nyctibiidae (Aves, Caprimulgiformes)

The Potoos form an exclusively neotropical family of nocturnal birds distributed throughout Central and South America, except Chile, and reaching their highest diversity in the Amazon region. The seven currently recognized species are certainly among the most poorly known birds of this region. They are characterized by a distinctive mimicry of vegetal trunks, where they remain almost motionless during daytime. For this reason, their nocturnal and cryptic habits make them exceedingly difficult to study. Published accounts on behavior and natural history of the family are scarce and contributions regarding its anatomy are rare. Here we sample six of the seven currently recognized species of Nyctibiidae, including Nyctibius grandis, N. aethereus, N. griseus, N. jamaicensis, N. leucopterus and N. bracteatus, in order to conduct a detailed and illustrated description of the skull and jaw osteology. High interspecific variation in skull osteology was observed in the family. Species of this family possess a highly modified skull, adapted to their life habits, which shelters their well developed eyes and permits a large mouth opening. The bones that form the palate structure exhibit a dorsoventral flattening, particularly in the pterigoid and parasphenoid bones, with the palatine bone being a broadly developed, wing-shaped structure. In the maxilar region, near the jugal arch, there is a tooth-like projection, unique among birds, which may assist in the retention of prey upon capture. The vomer bone is highly variable within the family, showing varying numbers of rostral projections amongst species. The broad occipital region exhibits large spacing between the quadrate bones, which are vertically disposed and possess a reduced processus orbitalis. The mandible, which is flexible and elastic, has an extremely short symphyseal region and sindesmotic joints in both mandibular rami. As a family, potoos possess a highly specialized skull which provides insight into the relationship between the form of the structures and the feeding habits of the species. Furthermore, the large interspecific variation in skull morphology emphasizes the needs for taxonomic revision within the family, which at present is lumped into a single genus.

Índice de infestação e fatores de mortalidade do bicudo-do-algodoeiro (Coleoptera: Curculionidae) no semi-árido do sudoeste da Bahia, Brasil

The boll weevil (Anthonomus grandis Boheman, 1843) (Coleoptera: Curculionidae) is a pest that limits the production of cotton, especially in the North East of Brazil. The present study aimed to estimate the infestation index and natural mortality of boll weevil at Caraibas County, located in the semi-arid of the Southwest ofBahia. The experiment was performed using the cultivar BSR Aroeira, at Fazenda Lagoa Seca, in 2006. Weekly evaluations were performed, in five sampling areas 25m2, collecting blossoms fallen on the ground. The infestation was estimated by counting the oviposition punctures and /or the feeding on blossoms, and also by the presence of one of the phases of the boll weevil in the inside. Mortality factors were studied through the dissection of blossoms, estimating predation, parasitism, dissection and disease. The results obtained allowed to conclude that the boll weevil determines high infestation levels in the region. Parasitism, dissection and predation, following this order, determine high rates of real mortality of the pest. Catolaccus grandis Burks, 1954 (Hymenoptera: Pteromalidae) and Bracon sp.(Hymenoptera: Braconidae) are parasitoids of boll weevil reported in sothwestern Bahia, being the first one the predominant species. © 2009, Sociedad Venezolana de Entomología.

Alternative to peat for Agaricus brasiliensis yield

Casing layer is one of the most important components of Agaricus spp. production and it directly affects mushroom productivity, size and mass. The aim of this study was to evaluate potential raw materials as a casing layer and their effect on Agaricus brasiliensis productivity. Raw materials from Brazil with potential use were selected and characterized, and the most promising ones were tested as casing layers for mushroom yield. Evaluated raw materials included lime schist, vermiculite, eucalyptus sawdust, sand, São Paulo peat, Santa Catarina peat, subsoil and charcoal. Particle size, porosity and water absorption in relation to mushroom yield for casing layers were determined. Lime schist, an alternate casing layer to peat, is presented and the effects of the casing layer on the mushroom yield are discussed. © 2009 Elsevier Ltd. All rights reserved.

Solvent capacity of different substances on gutta-percha and resilon

The aim of this study was to evaluate the effectiveness of 3 solvents (eucalyptol, orange oil, and xylol) on 2 types of gutta-percha (conventional and thermoplastic) and Resilon. Specimens (10 mm diameter × 1 mm thick; n=7 per condition) were prepared and maintained at 37°C for 48 h. Each specimen was weighed on a precision scale every 24 h until its mass was stable, at which time the initial mass was determined. Specimens (n=7) were then immersed in the solvent solutions and, after 48 h at 37°C, they were reweighed at 24- h intervals, until stabilization (final mass). The difference between the final and the initial mass determined the solvent capacity of each solvent. Data were subjected to analysis of variance and Tukey's test at 5% significance level. The results demonstrated that xylol was the most effective, especially on conventional gutta-percha and Resilon (p<0.05). Eucalyptol and orange oil were more effective on thermoplastic gutta-percha than the other materials (p<0.05). It was concluded that all evaluated substances presented solvent action, but xylol was the most effective on both gutta-percha or Resilon.

Variação genética, interação genótipo solo e ganhos na seleção em teste de progěnies de Corymbia citriodora Hook em Luiz Antonio, São Paulo

The aim of this study was to investigate the genetic variation, the genotype × soil interaction and the selection among and within Corymbia citriodora progenies in three different kinds of soils (Red Latossol, Quartz Sand and Purple Latossol), which occur in the Luiz Antônio Experimental Station, São Paulo State, Brazil. The progeny test was established 1983, using 56 open-pollinated families of C. citriodora. Twenty fve years after planting the following traits were measured: height, diameter at breast height (Dbh), stem form and survival. Best growth occurred in Purple Latossol. Significant differences among progenies were detected for most traits in all sites, suggesting the possibility of improvement by selection. In the analysis with sites, Significant differences among locals, progenies and genotypes × soil interaction were detected, confiming that the tested material has sufficient genetic variation to be explored by selection in all sites. The analysis of genotype × soil interaction indicates that growth traits present single interaction and the same progenies can be selected in each site. On the order hand, genotype × soil interaction for stem form and survival was complex; and specifc progenies need to be selected for each kind of soil. The population, due to its high genetic variation and strong genetic control of traits, permits to obtain considerable genetic gains by selection among and within progenies.

Infuěncia do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m 3sc, with a mean of operating cost of US$ 78.78 per work hour.