Estudo de melhorias dos painéis de baixa tensão da Faculdade de Engenharia de Guaratinguetá - UNESP

The protection and distribution systems for the electrics equipments are really important for the safety of products, process and final users, for an enterprise or even for a residence. For that, it’s necessary the utilization of low voltage switchboards for controlling the feeding of a charge, avoiding any kind of abnormality that can eventually occur. It’s necessary to pay attention in the cubicles conditions, and always verify if they are in accordance to the norms of the product, verifying also any kind of physical damage for the operator and/or users. In this line, the present graduation work analyses the low voltage switchboards in the college, checking if they are attending the actual standards, suggesting some improvements and later making a simulation of the creation of a new panel that reach all the needing in substitution of this actual, through the software Simaris. Using the research and lecture of norms and regulations for verifying the problems, this way we could register the greatest acting failures. These actions are made for becoming aware to the university about the danger in using electrics equipments without a minimum degree of protection, allowed by the law, and attempting to the urgency in changing this fails

Analise de defeitos em motores através de vibração mecânica: estudo de caso

Revolving machines are among the most used equipment in general industry and therefore expenditures on this equipment class are a significant portion of the total amount spent by the company. If there is an unscheduled stop of some of this equipment, industrial plants can lose huge amounts of money caused by interrupted production and parts delay. Others may increase significantly maintenance costs due to consequences elsewhere not affected before. Even plant and people safety can be in danger if there is an operation interruption without a backup system start. This work is focused on a rotating system case study which is monitored by vibration analysis that shows that is possible to determine when is the most appropriate time for equipment intervention without any reliability loss just by using a simple and cheap system which is not much used because professionals are not aware to its utility. Industrial facilities were evaluated by fail detection and historical analysis in some equipment in order to show feasibility of vibration analysis through a before-during-after process. The plant evaluated is part of a chemical multinational located in Guaratinguetá-SP. At this time, that plant had around 650 critical equipment monthly monitored and no unscheduled shutdown was registered in one year period due to equipment monitoring

Criação de novo procedimento de engenharia que possibilite a rastreabilidade das tubulações de uma indústria química

The number of piping in an industry is high. Through this piping are conducted several kind of products at several temperature and pressure conditions. In a chemical company, the piping quantity conducting harmful chemical products to human health and to the environment is higher. Nowadays the theme sustainability is often mentioned and harm to environment may cause irreversible damage to the human being, to the fauna, to the flora and to company´s credibility. In this context, controlling over the piping to avoid accidents is mandatory. The objective of this monograph is to create a procedure which enables the chemical companies piping traceability. This monograph analyses the several existent traceability system in the three economy sectors and approaches the technical question of industrial piping in order to create a procedure that achieves its objectives as a technical document and at the same time be economically feasible, with low complexibility level and high practicability. Some possibilities to elaborate this procedure had been studied, as the creation of an alphanumeric code and making with a chisel in the pipeline based on ASTM F2897 and the use of chips to store the information. However, the procedure which best meet the requirement as low cost and high applicability is filling out an electronic plan with information about welding process, welding certification, welding consumables and inspections

Viabilidade técnica e econômica na utilização de um sistema fotovoltaico para alimentação de luminárias LED na Faculdade de Engenharia do Campus de Guaratinguetá SP

Solar energy can be considered the largest source of energy available on earth and has attracted in recent decades, attention and interest for its rational use. The use of energy sources in a sustainable way is essential to the survival of future generations, due to the scarcity of natural resources and their exploitation in a disorderly way. This academic work aims to bring a possible alternative to reduce the consumption of eletrical energy, at the University of Engineering – Campus of Guaratinguetá, through the use of a photovoltaic system interconnected to the LED bulbs. For this, the necessary data for the design of the photovoltaic system componentes and their acquisition costs were obtained and three differents configurations were developed to choose the one that bests fits the studied case, considering the return time of the initial investment (payback)

Softwares livres e prototipagem rápida aplicados na engenharia

In modern industry we see a growing need for answers cheaper, accurate and quick to deliver solutions and products to be able to remain competitive. In this way the inclusion of open source software and Rapid Prototyping tools have proven very important to obtain the expected results. This work, through information gathering, analysis software and their applicability, search tools commercially available rapid prototyping will demonstrate the importance of these tools and will also present possible configurations for a space for rapid prototyping within the university, as a proposal to implement a rapid prototyping laboratory at the Faculdade de Engenharia de Guaratinguetá

Decisão making or buying: uma aplicação em células de manufatura de uma indústria de produção mecânica

In order to maintain the competitiveness the companies seek for cost reduction and resource optimization. A product or service price is calculated considering direct and indirect costs involved in its fabrication, which means that if an intern indirect process is optimized, the final price of the product is also reduced and becomes more interesting to the final costumer. Considering this reasoning, the companies must evaluate each of their processes and optimize them. It is common to outsource intern products manufacturing as a cost reduction strategy, nevertheless when there are already resources and capability to produce the own goods, it becomes necessary to evaluate the economic gain that each strategy - make or buy - generates. This paper aims to evaluate the necessary support to take a decision regarding making or buying in a production cell of hoses based in the value of economic cost, system cost and decision process

Sistema de avaliação e tratamento da coluna lombar com o uso de tração mecânica

Pós-graduação em Engenharia Mecânica - FEG

Caracterização microestrutural e propriedades mecânicas em pinos para transmissão mecânica de aço inoxidável martensítico e pinos fusíveis de latão em chave de alta tensão

Pós-graduação em Engenharia Mecânica - FEB

Caracterização físico-mecânica de painéis de partículas de bambu com adição de casca de café

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização mecânica e microestrutural de juntas soldadas a laser em aços maraging com posterior tratamento térmico e termoquímico de superfície a plasma

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Una metodología para el autoaprendizaje y la autoevaluación en Mecánica Básica

En la Escuela de Minas de la Universidad Politécnica de Madrid (UPM) se ha llevado a cabo el proceso de adaptación a los principios de Bolonia. Esto ha implicado cambios en la metodología de la enseñanza. En este artículo se describe una nueva metodología aplicada a un curso introductorio de Mecánica ubicado en el primer semestre del grado de dos diferentes títulos de ingeniería. Los diferentes resultados se presentan mediante un índice que permite evaluar el resultado global del proceso de enseñanza-aprendizaje alcanzado con esta metodología

Fabrico e ensaio balístico em condições reais de conceito melhorado de um projétil de detonação mecânica

A floresta constitui uma das riquezas naturais com maior valor em todo o planeta, assumindo uma vital importância em termos ambientais e económicos, nomeadamente para Portugal. Neste projeto desenvolve-se um potencial meio de combate a incêndios florestais, com base num conceito inovador e complementar aos atuais meios aplicados no combate a este tipo de flagelo. Este projeto de investigação visa o desenvolvimento de um projétil de detonação mecânica, logo inerte, para aplicação no combate a incêndios florestais, e enquadra-se no âmbito de uma parceria alargada de colaboração em I&D entre a Academia Militar e o Instituto Superior Técnico. O conceito deste produto, ao qual foi atribuído o acrónimo: FIREND, foi, inicialmente, desenvolvido no âmbito de um projeto de I&D da Academia Militar. Neste projeto realiza-se o desenvolvimento final do conceito do produto, incluindo a verificação de aspetos chave no projeto mecânico, seleção e aquisição de materiais e fabrico de protótipos para ensaios balísticos em condições reais. Os resultados de funcionalidade e eficiência são apresentados nas fases estabilidade em voo, impacto com o solo, detonação, projeção e dispersão da carga para o exterior e análise de recuperação dos componentes do FIREND, após utilização. Tendo em conta os resultados obtidos relativos ao funcionamento do FIREND durante o disparo do Obus, voo, impacto no solo e detonação e ainda o estado geral dos componentes após os ensaios, pode-se concluir que se trata de um projeto viável.

Análise de tensões integrada a sistema de engenharia reversa para projeto e confecção de próteses

This work consists of the conception, developing and implementation of a Computational Routine CAE which has algorithms suitable for the tension and deformation analysis. The system was integrated to an academic software named as OrtoCAD. The expansion algorithms for the interface CAE genereated by this work were developed in FORTRAN with the objective of increase the applications of two former works of PPGEM-UFRN: project and fabrication of a Electromechanincal reader and Software OrtoCAD. The software OrtoCAD is an interface that, orinally, includes the visualization of prothetic cartridges from the data obtained from a electromechanical reader (LEM). The LEM is basically a tridimensional scanner based on reverse engineering. First, the geometry of a residual limb (i.e., the remaining part of an amputee leg wherein the prothesis is fixed) is obtained from the data generated by LEM by the use of Reverse Engineering concepts. The proposed core FEA uses the Shell's Theory where a 2D surface is generated from a 3D piece form OrtoCAD. The shell's analysis program uses the well-known Finite Elements Method to describe the geometry and the behavior of the material. The program is based square-based Lagragean elements of nine nodes and displacement field of higher order to a better description of the tension field in the thickness. As a result, the new FEA routine provide excellent advantages by providing new features to OrtoCAD: independency of high cost commercial softwares; new routines were added to the OrtoCAD library for more realistic problems by using criteria of fault engineering of composites materials; enhanced the performance of the FEA analysis by using a specific grid element for a higher number of nodes; and finally, it has the advantage of open-source project and offering customized intrinsic versatility and wide possibilities of editing and/or optimization that may be necessary in the future

Caracterização mecânica, térmica e acústica de um compósito que utiliza rejeitos de mármore, granito e EPS para a fabricação de blocos para a construção civil

The use of composite materials for the construction industry has been the subject of numerous scientific papers in Brazil and in the world. One of the factors that motivate this quest is the housing deficit that countries especially the third world face. In Brazil this deficit reaches more than 6.5 million homes, around 12% of all US households . This paper presents a composite that was obtained from waste generated in processes for the production of granite and marble slabs, cement, gypsum, sand, crushed EPS and water. These wastes cause great damage to the environment and are thrown into landfi lls in bulk. The novelty of the work is in the combined study thermal, mechanical and acoustic composite obtained in real situation of rooms that are part of an experimental housing. Many blocks were made from cement compositions, plaster, foam, sand, marb le and / or granite, preliminary tests of mechanical and thermal resistance were made by choosing the most appropriate proportion. Will be given the manufacturing processes and assembly units 500 units 10 x 80 x 28 cm produced for the construction of an ex perimental home. We studied what kind of block and residue, marble or granite, made it more feasible for the intended purpose. The mechanical strength of the produced blocks were above 3.0 MPa. The thermal resistance of the blocks was confirmed by the maxi mum temperature difference between the inner and outer walls of rooms built around 8.0 ° C. The sound absorption for optimal room was around 31%. Demonstrated the feasibility of using the blocks manufactured with composite material proposed for construction.

Estágio profissional em gabinete de engenharia, na componente de climatização

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica com Especialização em Energia, Climatização e Refrigeração