Treatment of fibrinolytic alveolitis with rifamycin B diethylamide associated with gelfoam: a histological study.

The most common complication in the healing of extraction wounds is fibrinolytic alveolitis, which may also be termed dry socket. Reduction in the incidence of this condition after the application of topical antibiotics and the use of systemic antibiotics has been reported. A histological study of disturbed alveolar socket healing in rats was carried out to analyze the influence of application of rifamycin B diethylamide (Rifocin M) associated or not with Gelfoam. Sixty-four male rats (Rattus norvegicus albinus, Wistar), weighing 120-150 g, were divided into 4 groups of 16 animals each. In the second group of rats which received implants of Gelfoam, there was an intense resorption of bone walls in the initial stage. The rats that received implants of Gelfoam saturated with Rifocin M (fourth group) showed better results than the second group. The third group (only irrigation with rifamycin) showed better bone formation in the alveolar socket compared to the first, second and fourth groups. Thus, these results showed that rifamycin irrigation is useful in the control of alveolar infections.

Clinical evaluation of an ointment with 10% metronidazole and 2% lidocaine in the treatment of alveolitis.

AIM: In this study, the authors evaluate the use of a 10% metronidazole and 2% lidocaine ointment, using a lanolin base and mint as flavoring, to treat alveolitis in humans. METHODS: Twenty-five patients, with a diagnosis of alveolitis, were treated in the following way: locoregional anesthesia; surgical cleaning of the socket with alveolar curettes; saline solution irrigation with a 20 ml disposable syringe; and complete filling of the socket with the ointment. RESULTS: The analysis of the results showed that the painful symptoms were severe before and on the day of the treatment in 17 (68%) of the 25 patients treated. Post-treatment analysis presented 2 patients (18%) with severe painful symptoms after 24 h of the treatment and complete remission of painful symptoms after 48 h of the treatment with the ointment. CONCLUSIONS: Based on the results, it is possible to conclude that the 10% metronidazole and 2% lidocaine ointment, with mint flavoring and lanolin as a base, can be used to treat alveolitis.

Influence of local tetracycline on the microbiota of alveolar osteitis in rats

The aim of the present study was to evaluate the effects of local tetracycline on the occurrence of alveolar osteitis in rats, and on the microbiota associated to this infection. Forty Wistar rats were randomly assigned to 4 groups (n=10): I - the rats had the maxillary right incisor extracted and the alveolar wound did not receive any treatment; II - adrenaline and Ringer-PRAS were introduced into the alveolar wound; III - the alveolar wound was irrigated with sterile saline; and IV - the alveolar wound was irrigated with an aqueous solution of tetracycline. Microbial samples from the alveolar wounds were collected 2 days after surgery and inoculated on blood agar (with and without 8 μg/mL of tetracycline) and other selective media, and were incubated in either aerobiosis or anaerobiosis at 37°C, for 2 to 14 days. It was verified that tetracycline reduced the occurrence of alveolar osteitis in the rats and caused significant changes in the microbiota of the surgical sites, decreasing the number of anaerobes and increasing the participation of tetracycline-resistant and multi-resistant microorganisms.

Avaliação clínica da pasta de metronidazol a 10% e lidocaína a 2% no tratamento da alveolite

Pós-graduação em Odontologia - FOA

Are antibiotics necessary after lower third molar removal?

Objective. Patients (n = 110) free of antibiotics, operated on by 3 surgeons ranging in clinical experiences, were evaluated for infection. Study Design. In the preoperative period and during the second and seventh postoperative days, the following parameters were analyzed: pain, infection, swelling, trismus, body temperature, C-reactive protein levels (CRP), and salivary neutrophil counts (SNC). During surgery, the following parameters were analyzed: systolic, diastolic, and mean arterial pressure; oximetry; heart rate; anesthesia quality; local anesthetic amount; bleeding; surgery difficulty; and surgery duration. Results. There were some differences in the surgery duration, local anesthetic amount, anesthesia quality, bleeding, pain experienced, trismus, CRP, and SNC, and no changes in hemodynamic parameters, rescue analgesic medication, wound healing, swelling, body temperature, confirmed case of dry socket, or any other type of local infection. Particularly, no systemic infections were found after lower third molar removal (LTMR). Conclusions. This study suggests that antibiotic prescriptions are unnecessary after LTMR when preoperative infections are absent. (Oral Surg Oral Med Oral Pathol Oral Radiol 2012;114(suppl 5):S199-S208)

Complexação de guaiacol com ß-ciclodextrina para tratamento de alveolite seca: avaliação in vitro e in vivo

A alveolite seca (AS) é uma das complicações pós-operatórias mais comuns e sintomáticas na odontologia, porém, até o momento não há um protocolo de tratamento definido. O composto fenólico guaiacol (Gu) é um dos materiais utilizados para revestimento intra-alveolar devido às suas propriedades analgésicas, antioxidantes e antimicrobianas. Contudo, sua desvantagem é a dificuldade de manipulação decorrente da sua baixa estabilidade, alta volatilidade e sensibilidade à oxidação. Para melhorar suas propriedades e aumentar sua aplicabilidade clínica, um complexo de inclusão de Gu com ß-ciclodextrina (ßcd) foi desenvolvido. A formação do complexo supramolecular de Gu:ßcd foi caracterizada mediante a ressonância magnética nuclear (RMN), nos experimentos de 1H e 2D ROESY. A atividade antibacteriana do Gu e Gu:ßcd frente a Escherichia coli, Staphylococcus aureus, Streptococcus mitis, Streptococcus mutans, Streptococcus sanguis e Aggregatibacter actinomycetemcomitans foi analisada pelo método da microdiluição e sua citotoxicidade em osteoblastos de calvária de rato, foi estudado com o ensaio do MTT. O processo de reparo alveolar induzido pelo Gu:ßcd foi avaliado histologicamente após tratamento de alveolite seca em molares inferiores de ratos. A RMN mostrou correlações espaciais entre os hidrogênios internos (H3 e H5) da ßcd e os hidrogênios aromáticos, H(a) e H(b) do Gu, confirmando a formação do complexo. A complexação do Gu na ßcd potencializou seu efeito antibacteriano e reduziu sua citotoxicidade em osteoblastos. O estudo in vivo evidenciou a ocorrência de ossificação no ápice alveolar dos ratos tratados com Gu:ßcd, no 7o dia. No 14o dia, as trabéculas ósseas ocuparam também o terço médio do alvéolo e no 21o dia, todo o alvéolo se encontrava preenchido por osso neoformado. Estes resultados foram similares ao controle negativo e superiores ao controle positivo (Alvogyl®). Os benefícios obtidos pela inclusão do Gu na ßcd foram demonstrados pela melhora das propriedades biológicas do Gu in vitro e o adequado reparo alveolar in vivo.

Influence of smectite suspension structure on sheet orientation in dry sediments : XRD and AFM applications

The structure-building phenomena within clay aggregates are governed by forces acting between clay particles. Measurements of such forces are important to understand in order to manipulate the aggregate structure for applications such as dewatering of mineral processing tailings. A parallel particle orientation is required when conducting XRD investigation on the oriented samples and conduct force measurements acting between basal planes of clay mineral platelets using at. force microscopy (AFM). To investigate how smectite clay platelets were oriented on silicon wafer substrate when dried from suspension range of methods like SEM, XRD and AFM were employed. From these investigations, we conclude that high clay concns. and larger particle diams. (up to 5 μm) in suspension result in random orientation of platelets in the substrate. The best possible laminar orientation in the clay dry film, represented in the XRD 0 0 1/0 2 0 intensity ratio of 47 was obtained by drying thin layers from 0.02 wt.% clay suspensions of the natural pH. Conducted AFM investigations show that smectite studied in water based electrolytes show very long-range repulsive forces lower in strength than electrostatic forces from double-layer repulsion. It was suggested that these forces may have structural nature. Smectite surface layers rehydrate in water environment forms surface gel with spongy and cellular texture which cushion approaching AFM probe. This structural effect can be measured in distances larger than 1000 nm from substrate surface and when probe penetrate this gel layer, structural linkages are forming between substrate and clay covered probe. These linkages prevent subsequently smooth detachments of AFM probe on way back when retrieval. This effect of tearing new formed structure apart involves larger adhesion-like forces measured in retrieval. It is also suggested that these effect may be enhanced by the nano-clay particles interaction.