Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Estudo da aderência entre o concreto celular e as barras de aço

Pós-graduação em Engenharia Civil - FEIS

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Fluxo contínuo: ferramenta do Sistema de Produção Enxuta aplicado ao processo de produção de estacas pré-moldadas de concreto para fundações

Este trabalho teve como objetivo a aplicação do fluxo contínuo na produção de estacas pré-moldadas de concreto para fundação, com base no Sistema de Produção Enxuta. Princípios que regem a Produção Enxuta, eliminação de desperdícios e o mapeamento do fluxo de valor em uma situação real foram utilizados para a obtenção de resultados dessa aplicação, evidenciando uma transformação enxuta, com expressivas reduções dos desperdícios gerados no processo puxado de produção das estacas. O período da pesquisa foi de 8 meses em uma empresa de caráter privado, onde por meio da utilização de ferramentas desse sistema e a metodologia da pesquisa-ação, foi possível identificar o processo crítico – serralheria – para onde se concentraram as ações de melhoria, com a mudança de leiaute, redução de desperdícios e criação de uma célula de produção, favorecendo a aplicação do fluxo contínuo nesta cadeia produtiva. No desenvolvimento da pesquisa, foram realizados treinamentos in loco com os futuros operadores da célula da serralheria, os quais participavam ativamente na promoção de melhorias. O resultado da implementação do fluxo contínuo é o seqüenciamento da produção por meio de leiaute celular e supermercados sincronizando à cadeia produtiva. A determinação do takt time de 14 minutos, o dimensionamento do pichi e o novo leiaute para a célula, permitiram reduções de 80% de movimentação no chão de fábrica, 15% de ganhos totais de área, diminuição de 66,5% de deslocamentos na serralheria. Essas mudanças beneficiaram as outras duas etapas do processo (ferragem e concretagem), também na redução de desperdícios com movimentações e, diante do contexto das melhorias, foi possível identificar os ganhos quanto aos custos operacionais. Como conseqüência, obteve-se um fluxo de informação claro através dos supermercados dentro da célula de produção, o estabelecimento de um fluxo de material e pessoas sem interrupções, favorecendo a implementação do fluxo contínuo. Contudo, criar o fluxo contínuo na produção de estacas pré-moldadas de concreto, em uma empresa privada, depende de fatores organizacionais quanto ao estilo gerencial, comprometimento e delegações de poderes, uma vez que a interrupção imediata do processo produtivo na ocorrência de problemas, somente tornou-se possível mediante intervenção da gerência geral, o que dificultou o prosseguimento das melhorias na linha de produção quanto aos demais processos.

Diseño y fabricación de dispositivos basados en cristal líquido polimérico

Esta tesis se centra en el estudio y desarrollo de dispositivos de aplicación basados en cristal líquido polimérico. Las propiedades de los cristales líquidos los hacen interesantes para su uso en el desarrollo de dispositivos de seguridad para autenticación de productos y marcas, y detección y prevención de falsificaciones. Asimismo, pueden ser muy útiles para fabricar dispositivos basados en CLs dispersos en polímero, los cuales tienen a su vez múltiples aplicaciones. La orientación de las moléculas de cristal líquido y la birrefringencia son las dos características principales que afectan a las propiedades de estos dispositivos. Un dispositivo de cristal líquido estándar consiste en un sándwich formado por dos sustratos de vidrio transparente, dotados con electrodo de ITO (Indium Tin Oxide) en su superficie interna, que confinan el cristal líquido en su interior. En la primera parte de esta tesis se describen las características más importantes que describen una célula de cristal líquido. Esta introducción básica en necesaria para la correcta comprensión de los capítulos posteriores en los que se detalla el desarrollo concreto de los dispositivos desarrollados en la investigación llevada a cabo. Por ejemplo, en el caso de los dispositivos de seguridad se han eliminado los sustratos de vidrio (en la última fase de su desarrollo) para conseguir dispositivos flexibles. En la segunda parte de la tesis se incluye la descripción completa de los dispositivos fabricados, así como de los protocolos de fabricación seguidos y diseñados específicamente para ello. También se detallan en esta parte los resultados obtenidos, así como las propiedades ópticas y electroópticas en cada caso, y el/los equipos de caracterización utilizados. Utilizando cristal líquido nemático y colorante dicroico, se han desarrollado dispositivos que contienen múltiples imágenes latentes en cada cara del mismo. Utilizando distintas técnicas de alineamiento se consigue crear cualquier tipo de motivo latente, ya sean símbolos sencillos, figuras, logotipos o incluso imágenes con escala de gris. Cuanto más complejo es el dispositivo, mayor es la dificultad para reproducirlo en una eventual falsificación. Para visualizar e identificar los motivos es necesario emplear luz polarizada, por ejemplo, con la ayuda de un sencillo polarizador lineal. Dependiendo de si el polarizador está colocado delante del dispositivo o detrás del él, se mostrarán las imágenes generadas en una u otra cara. Este efecto es posible gracias al colorante dicroico añadido al CL, a la orientación inducida sobre las moléculas, y a la estructura de twist utilizada en los dispositivos. En realidad, para ver el efecto de los dispositivos no es necesario el uso de un polarizador, basta con el reflejo de una superficie dielétrica (percialmente polarizado), o la luz emitida por la pantalla de dispositivos de consumo comunes como un televisor LCD, un monitor de ordenador o un “smartphone”. Por otro lado, utilizando una mezcla entre un CL nemático polimérico y un CL nemático no polimérico es posible fabricar dispositivos LCPC (Liquid Crystal Polymer Composite) con propiedades electroópticas muy interesantes, que funcionan a tensiones de conmutación bajas. El CL polimérico conforma una estructura de red en el interior del sándwich que mantiene confinado al CL nemático en pequeños microdominios. Se han fabricado dispositivos LCPC con conmutación inversa utilizando tanto alineamiento homogéneo como homeotrópico. Debido a que tanto la estructura de CL polimérico como el CL nemático que rellena los microdominios están orientados en una misma dirección de alineamiento preinducida, la luz dispersada por el dispositivo se encuentra polarizada. La dirección de polarización coincide con la dirección de alineamiento. La innovación aportada por esta investigación: un nuevo dispositivo LCPC inverso de respuesta ultrarápida y polarizada basado en la mezcla de dos CL nemáticos y, un dispositivo de seguridad y autenticación, patentado internacionalmente, basado en CL nemáticos dopados con colorante dicroico. Abstract This thesis is centered on the availability to use polymerizable liquid crystals to develop non-display application LC devices. Liquid crystal properties make them useful for the development of security devices in applications of authentication and detection of fakes, and also to achieve polymer dispersed LC devices to be used for different applications that will be studied here. Induced orientation of liquid crystal molecules and birefringence are the two main properties used in these devices. A standard liquid crystal device is a sandwich consisting of two parallel glass substrates carrying a thin transparent ITO (Indium‐Tin‐Oxide) electrode on their inner surfaces with the liquid crystal in the middle. The first part of this thesis will describe the most important parameters describing a liquid crystal cell. This basis is necessary for the understanding of later chapters where models of the liquid crystal devices will be discussed and developed. In the case of security devices the standard structure of an LC device has been modified by eliminating the glass substrates in order to achieve plastic and flexible devices. The second part of the thesis includes a detailed description of the devices achieved and the manufacturing protocols that have been developed ad-hoc. The optical and electrooptical properties and the characterization equipment are described here as well. Employing nematic liquid crystal and dichroic colorants, we have developed devices that show, with the aid of a polarizer, multiple images on each side of the device. By different alignment techniques it is possible to create any kind of symbols, drawings or motifs with a grayscale; the more complex the created device is, the more difficult is to fake it. To identify the motifs it is necessary to use polarized light. Depending on whether the polarizer is located in front of the LC cell or behind it, different motifs from one or the other substrate are shown. The effect arises from the dopant color dye added to the liquid crystal, the induced orientation and the twist structure. In practice, a grazing reflection on a dielectric surface is polarized enough to see the effect. Any LC flat panel display (LCD TV, computer, mobile phone) can obviously be used as backlight as well. On the other hand, by using a mixture of polymerizable and non-polymerizable nematics liquid crystals it is also possible to achieve LCPC (Liquid Crystal Polymer Composite) devices that show really interesting electrooptical characteristics using low switching voltages. Polymerizable LC creates a hollow structure inside the sandwich glass cell that keep nematics liquid crystal confined creating microdomains. Homogeneous and homeotropic alignments have been used to develop inverse switching mode LCPCs. Due to the double LC oriented structure, the outgoing scattered light from these devices is already polarized. The polarization axis coincides with LC molecules director, the alignment direction promoted. The novelties derived from the investigation presented here, new ultrafast inverse LCPC with polarized outgoing scattered light based on oriented nematic LC mixture, and an internationally patented security and authentication device based on nematics (doped with dichroic dye) oriented polymerizable LC.

Computación celular con membranas: un estudio de modelos de cómputo bioinspirados

Los resultados presentados en la memoria de esta tesis doctoral se enmarcan en la denominada computación celular con membranas una nueva rama de investigación dentro de la computación natural creada por Gh. Paun en 1998, de ahí que habitualmente reciba el nombre de sistemas P. Este nuevo modelo de cómputo distribuido está inspirado en la estructura y funcionamiento de la célula. El objetivo de esta tesis ha sido analizar el poder y la eficiencia computacional de estos sistemas de computación celular. En concreto, se han analizado dos tipos de sistemas P: por un lado los sistemas P de neuronas de impulsos, y por otro los sistemas P con proteínas en las membranas. Para el primer tipo, los resultados obtenidos demuestran que es posible que estos sistemas mantengan su universalidad aunque muchas de sus características se limiten o incluso se eliminen. Para el segundo tipo, se analiza la eficiencia computacional y se demuestra que son capaces de resolver problemas de la clase de complejidad ESPACIO-P (PSPACE) en tiempo polinómico. Análisis del poder computacional: Los sistemas P de neuronas de impulsos (en adelante SN P, acrónimo procedente del inglés «Spiking Neural P Systems») son sistemas inspirados en el funcionamiento neuronal y en la forma en la que los impulsos se propagan por las redes sinápticas. Los SN P bio-inpirados poseen un numeroso abanico de características que ha cen que dichos sistemas sean universales y por tanto equivalentes, en poder computacional, a una máquina de Turing. Estos sistemas son potentes a nivel computacional, pero tal y como se definen incorporan numerosas características, quizás demasiadas. En (Ibarra et al. 2007) se demostró que en estos sistemas sus funcionalidades podrían ser limitadas sin comprometer su universalidad. Los resultados presentados en esta memoria son continuistas con la línea de trabajo de (Ibarra et al. 2007) y aportan nuevas formas normales. Esto es, nuevas variantes simplificadas de los sistemas SN P con un conjunto mínimo de funcionalidades pero que mantienen su poder computacional universal. Análisis de la eficiencia computacional: En esta tesis se ha estudiado la eficiencia computacional de los denominados sistemas P con proteínas en las membranas. Se muestra que este modelo de cómputo es equivalente a las máquinas de acceso aleatorio paralelas (PRAM) o a las máquinas de Turing alterantes ya que se demuestra que un sistema P con proteínas, es capaz de resolver un problema ESPACIOP-Completo como el QSAT(problema de satisfacibilidad de fórmulas lógicas cuantificado) en tiempo polinómico. Esta variante de sistemas P con proteínas es muy eficiente gracias al poder de las proteínas a la hora de catalizar los procesos de comunicación intercelulares. ABSTRACT The results presented at this thesis belong to membrane computing a new research branch inside of Natural computing. This new branch was created by Gh. Paun on 1998, hence usually receives the name of P Systems. This new distributed computing model is inspired on structure and functioning of cell. The aim of this thesis is to analyze the efficiency and computational power of these computational cellular systems. Specifically there have been analyzed two different classes of P systems. On the one hand it has been analyzed the Neural Spiking P Systems, and on the other hand it has been analyzed the P systems with proteins on membranes. For the first class it is shown that it is possible to reduce or restrict the characteristics of these kind of systems without loss of computational power. For the second class it is analyzed the computational efficiency solving on polynomial time PSACE problems. Computational Power Analysis: The spiking neural P systems (SN P in short) are systems inspired by the way of neural cells operate sending spikes through the synaptic networks. The bio-inspired SN Ps possess a large range of features that make these systems to be universal and therefore equivalent in computational power to a Turing machine. Such systems are computationally powerful, but by definition they incorporate a lot of features, perhaps too much. In (Ibarra et al. in 2007) it was shown that their functionality may be limited without compromising its universality. The results presented herein continue the (Ibarra et al. 2007) line of work providing new formal forms. That is, new SN P simplified variants with a minimum set of functionalities but keeping the universal computational power. Computational Efficiency Analisys: In this thesis we study the computational efficiency of P systems with proteins on membranes. We show that this computational model is equivalent to parallel random access machine (PRAM) or alternating Turing machine because, we show P Systems with proteins can solve a PSPACE-Complete problem as QSAT (Quantified Propositional Satisfiability Problem) on polynomial time. This variant of P Systems with proteins is very efficient thanks to computational power of proteins to catalyze inter-cellular communication processes.

Efecto de un prebiótico PCL (Pared Celular de Levadura) -Glucano, sobre el comportamiento productivo de pollos de engorde.

Se realizó un experimento para evaluar el efecto de un prebiótico derivado de paredes celulares de levadura (PCL-Glucano) sobre el comportamiento productivo de pollos de engorde. Se utilizaron 245 aves de un día de edad (estirpe Cobb 500), los cuales fueron distribuidos mediante un diseño completamente al azar en cinco tratamientos con siete repeticiones por tratamiento. Y siete aves por repetición. Los tratamientos evaluados fueron: T1: concentrado comercial (CC), T2: CC + antibiótico (Ribofloxacina al 10%), T3:0.1% de prebiótico PCL-Glucano (1000 mgkg -1 de alimento), T4: 0.15% de prebiótico PCL-Glucano (1500 mgkg -1 de alimento) y T5:0.20% de prebiótico PCL-Glucano (2000 mgkg -1 de alimento); las variables evaluadas fueron peso vivo, ganancia de peso, consumo de alimento y conversión alimenticia. Se realizaron mediciones a los 21, 35 y 42 d. Se encontró que los mayores pesos vivos (2347 y 2307 g), ganancias de pesos finales (2,316 y 2,275 g) y mejor conversión alimenticia (1.82 y 1.84) se obtuvieronconT2 y T5, sin diferencias estadísticas entre sí, pero fueron significativamente (P<0.05) superiores a T1, T3 y T4. El análisis financiero demostró que el mejor tratamiento fue T5, superando a T2 en U$ 0.21, en relación al costo utilidad del uso de los tratamientos. En conclusión la utilización de PCL-Glucano a razón de 0.20% en el concentrado de inicio y concentrado final para pollos de engorde, es una alternativa viable biológicamente y financieramente, para reemplazar el uso de antibióticos como aditivos en la alimentación de pollos de engorde.

Desmistificando a convergência : o caso da radiodifusão no celular

Analisa as implicações técnicas, sociais e legais da oferta, por operadoras de telefonia celular, de serviço de acesso a conteúdo produzido por emissoras de radiodifusão e outras produtoras, nas modalidades transmissão ao vivo (streaming) e descarga de conteúdo sob-demanda (ou download de vídeo on-demand).

Radiação das antenas do serviço móvel celular e seu tratamento na legislação brasileira e de outros países

Consultoria Legislativa - Área XIV - Comunicação Social, Informática, Telecomunicações, Sistema Postal, Ciência e Tecnologia.

Desarrollo de un nuevo soporte polímerico con componentes de matriz extracelular neural para su aplicación en la diferenciación "in vitro" de distintas células primarias

268 p. : il.

Los errores conceptuales y las ideas previas del alumnado de ciencias en el ámbito de la enseñanza de la biología celular. Propuestas alternativas para el cambio conceptual.

Este trabajo se ha centrado en el estudio de los errores conceptuales en las ciencias biológicas, pudiendo así, si fuera posible, buscarle una posible solución para erradicarlos o, por lo menos, que las preconcepciones de los alumnos coincidan con las teorías científicas. Además, promueve reflexionar sobre los problemas vinculados con la enseñanza de la Biología celular.