299 resultados para Compatibilidade


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nematodes severely attack net melon plants under protected cultivation conditions. The objective of this research was to select rootstocks with resistance to Meloidogyne incognita and M. javanica. The experiment was carried out under greenhouse conditions from October 2010 to April 2011 in Jaboticabal, Sao Paulo state, Brazil. Thirty-three cucurbitaceous genotypes were investigated as rootstocks; melons: CNPH 01-930 (Cucumis melo var. flexuosus), CNPH 01-962, 01-963 CNPH (Cucumis melo var. conomon), cvs. Gaucho Redondo, Gaucho Comprido, Redondo Amarelo, Gulfcoast, Chilton, Bonus no. 2, Fantasy; watermelons: cv. Charleston Gray, Progenie da Coreia (Citrullus lanatus); pumpkins: cvs. Mra. Ma, Ornamental, Howden, Mammoth, Kururu, Goianinha (Cucurbita moschata); gourd: Abobora de Porco, cvs. Maranhao, Brasileirinha (Lagenaria siceraria); squash: cv. Pataca Gigante (Cucurbita maxima); cucumber: cvs. Caipira, Branco Meio Comprido, Curumim (Cucumis sativus); loofah: Metro, Semente Branca, Semente Preta (Luffa cylindrica); wax gourd (Benincasa hispida); pumpkin rootstock: Hybrid cv. Keij; snake gourd (Trichosanthes cucumerins) and musk cucumber (Sicana odorifera). To evaluate the resistance, seedlings were transplanted to pots and the root inoculated with 3,000 eggs and second stage juveniles of M. incognita and M. javanica. Fifty days after the inoculation, the plants were evaluated for nematode resistance by means of the reproduction factor. The grafting compatibility between net melon cvs. Bonus no. 2 and Fantasy and the rootstocks previously characterized as resistant were evaluated by means of 60 graftings. CNPH 01-962, CNPH 01-963 and melon 'Gaucho Redondo', were considered resistant to M. incognita. Melon 'Redondo Amarelo', watermelon 'Charleston Gray', watermelon Progenie da Coreia, Trichosanthes cucumerins were considered resistant to M. javanica. Benincasa hispida was resistant to M. javanica and M. incognita. The compatibility between net melons and resistant rootstocks was higher than 98%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The dental trade has offered dental impression and dental stone for orthodontic use ensuring accurate models. The compatibility between these materials is defined by the wetting of the model surfaces by the mixture water/stone poured over it and the influenced by the method of disinfection of model and disinfectant solution used. It was evaluated the influence of spray disinfection with sodium hypochlorite 1% on the wettability of two commercial alginate (Jeltrate ® - Dentsply and Orthoprint ® - Zhermack) at two commercial type III gypsum (Rio ® - ME and AOBussoli Orthogesso Orthogesso ®-SA). Twenty models were fabricated for each type of alginate, which were divided into two groups (water and sodium hypochlorite), receiving respectively water and sodium hypochlorite 1% spray. Each group of models was then further divided into two subgroups, and on their surface were poured 2 ml of type III gypsum (Gesso Rio® or Orthogesso®). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to ANOVA and founded statistical significance for solutions used. It was concluded that sodium hypochlorite spray improved wettability of alginates studied.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Edição dedicada ao tema "Reforma Política" realizada em parceria com a Consultoria Legislativa do Senado Federal

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Trata do julgamento pelo Supremo Tribunal Federal da reclamação nº 2.138/DF - e das demais que lhe seguem -, pela inaplicabilidade da Lei nº 8.429/92 aos agentes políticos, que expressam as prerrogativas dos poderes estatais, ou que estão na cúpula da decisões governamentias, como por exemplo: Presidente da República, Ministros de Estado, Governadores, Prefeitos, Juízes, Membros do Ministério Público etc.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Atualmente, a produtividade do feijoeiro comum (Phaseolus vulgaris L.) pode ser reduzida devido à ocorrência de doenças em todo o território nacional, destacando-se a murcha de fusário, causada por Fusarium oxysporum f. sp. phaseoli (Fop). No campo, o patógeno é disseminado a longas distâncias através das sementes infectadas e/ou contaminadas e a sua sobrevivência ocorre, principalmente, no solo. Os objetivos deste trabalho foram: avaliar a inibição do crescimento micelial de Fop por Trichoderma spp.; classificar a sensibilidade in vitro de Fop e Trichoderma spp., separadamente, a fungicidas e verificar a compatibilidade entre fungicidas químicos e biológicos para controle de Fop, presente nas sementes e no solo. Para avaliar a inibição do crescimento micelial de Fop, foram utilizados três isolados do patógeno, os quais foram confrontados, in vitro, com três isolados de Trichoderma spp. em testes de cultura pareada e produção de metabólitos voláteis a 20-22°C. Os experimentos foram conduzidos em delineamento inteiramente casualizado, com cinco repetições para cada isolado de Trichoderma. Para a classificação da sensibilidade in vitro de Fop e Trichoderma a fungicidas, foram avaliados os mesmos isolados anteriormente utilizados. Foram comparados dez fungicidas, em doses entre 0 a 100 mg L-1 que foram ajustadas de acordo com a CI50 de cada fungicida. Com base na percentagem de inibição do crescimento micelial, foram estimados os valores da concentração inibitória de 50% (CI50) e 100% (CI100) e selecionaram-se os fungicidas compatíveis com Trichoderma spp. A compatibilidade entre tratamentos químico e biológico foi avaliada através da inoculação artificial de sementes de feijão com um isolado de Fop (IAC 11.299-1) e infestação do mesmo no solo. As sementes foram tratadas com os fungicidas fludioxonil, flutriafol e tiofanato metílico, e com os três produtos biológicos, separadamente e em misturas. Avaliou-se o efeito dos tratamentos por meio dos testes de sanidade, germinação, comprimento de plântulas, massa da matéria seca em laboratório e índice de velocidade de emergência e porcentagem de emergência em estufa não climatizada. O efeito protetor dos tratamentos foi verificado através do teste de transmissão do patógeno solo-planta. Todos os isolados de Trichoderma apresentaram antagonismo in vitro contra Fop. No teste de cultura pareada foi observada uma redução de 15 a 20% no crescimento micelial do patógeno. No teste de produção de metabólitos voláteis, o isolado T12-1086G05 foi responsável pela maior inibição do crescimento micelial de Fop (10 a 48%). Os testes de sensibilidade in vitro mostraram que tiofanato metílico, flutriafol e fludioxonil foram compatíveis com Trichoderma (CI50 > 2 mg L-1). Com exceção do flutriafol e do GF 422 isolados e em mistura, todos os tratamentos foram eficientes na erradicação de Fop nas sementes, sem afetar a sua qualidade fisiológica. No teste de transmissão, verificou-se que a incidência de Fop foi de 5 a 40% no hipocótilo e de 5 a 30% nas raízes de feijoeiro provenientes de sementes tratadas com os produtos.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Tese de mestrado, Geologia do Ambiente, Riscos Geológicos e Ordenamento do TerritórioUniversidade de Lisboa, Faculdade de Ciências, 2016

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O engajamento no trabalho é um dos objetivos dos gestores de pessoas. Este trabalho se propõe a analisar se a compatibilidade da pessoa com o ambiente de trabalho tem relação com o seu engajamento. Há três fatores na compatibilidade com o ambiente de trabalho (person-environment fit): person-job fit, que aborda a compatibilidade entre as habilidades da pessoa e o trabalho que ela realiza; person-organization fit, que está relacionado com os valores da pessoa frente os valores organizacionais; e needs-supply, que aborda a percepção do indivíduo quanto a ter suas necessidades atendidas pelo seu trabalho e pela organização em que trabalha. Construtos do comportamento organizacional, tais como satisfação no trabalho, comprometimento organizacional e intenções de rotatividade são comumente utilizados como variáveis sucessoras nos estudos de compatibilidade (fit), porém não foram encontrados estudos da relação entre a compatibilidade com o ambiente de trabalho (person-environment fit) e o engajamento no trabalho. Esta pesquisa de abordagem quantitativa baseou-se no instrumento Perceptions Fit, proposto por Cable e DeRue, em 2002; e no instrumento UWES Ultrech Work Engagement Scale, de Schaufelli e colaboradores, de 2006. Participaram da pesquisa 114 respondentes com no mínimo seis meses na atividade atual e pelo menos há cinco anos no mercado de trabalho. As análises por Modelagem de Equações Estruturais pelo método PLS (Partial Least Squares) comprovaram a hipótese de que quanto maior a compatibilidade entre a pessoa e seu trabalho, maior é seu engajamento. Além da hipótese central do trabalho de que a compatibilidade pessoa-trabalho influencia o engajamento no trabalho, a influência das dimensões de fit sobre o engajamento foi testada e os resultados mostraram que a dimensão necessidades atendidas (needs-supply) é a que mais influência tem sobre o engajamento. Este estudo inicia a discussão sobre a relação entre a compatibilidade da pessoa com o ambiente de trabalho e o seu engajamento, sugerindo reaplicação do método em públicos diferenciados, a fim de que os resultados possam ser utilizados para uma melhor eficácia da gestão de pessoas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The trioxsalen (Tri) is a low-dose drug used in the treatment of psoriasis and other skin diseases. The aim of the study was applying the thermal analysis and complementary techniques for characterization, evaluation of the trioxsalen stability and components of manipulated pharmaceutical formulations. The thermal behavior of the Tri by TG/DTG-DTA in dynamic atmosphere of synthetic air and nitrogen showed the same profile with a melting peak followed by a volatilization-related event. From the curves TG / DTG is observed a single stage of mass loss. By heating the drug in the stove at temperatures of 80, 240 and 260 °C, it had no change in chemical structure through the techniques of XRD, HPLC, MIR, OM and SEM. From the non-isothermal and isothermal TG kinetic studies was possible to calculate the activation energy and reaction order for the Tri. The drug showed good thermal stability. Studies on drug-excipient compatibility showed interaction of trissoralen with sodium lauryl sulfate 1:1. There was no interaction with aerosol, pregelatinized starch, sodium starch glycolate, cellulose, croscarmellose sodium, magnesium stearate, lactose and mannitol.The characterization of three trioxsalen formulations at concentrations of 2.5, 5, 7.5, 10, 12.5 and 15 mg was performed by DSC, TG / DTG, XRD, NIR and MIR. The PCA classification method based on spectral data from the NIR and MIR of trissoralen formulations allows successful differentiation into three groups. The formulation 3 was the one that best showed analytical profile with the following composition of aerosil excipients, pre-gelatinized starch and cellulose. The activation energy of the volatilization process of the drug was determined in binary mixtures and formulation 3 through fitting and isoconversional methods. The binary mixture with sodium starch glycolate and lactose showed differences in kinetic parameters compared to the drug isolated. The thermoanalytical techniques (DSC and TG / DTG) were shown to be promising methodologies for quantifying trioxsalen obtained by the linearity, selectivity, no use solvents, without sample preparation, speed and practicality.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Compatibility testing between a drilling fluid and a cement slurry is one of the steps before an operation of cementing oil wells. This test allows us to evaluate the main effects that contamination of these two fluids may cause the technological properties of a cement paste. The interactions between cement paste and drilling fluid, because its different chemical compositions, may affect the cement hydration reactions, damaging the cementing operation. Thus, we carried out the study of the compatibility of non-aqueous drilling fluid and a cement slurry additives. The preparation procedures of the non-aqueous drilling fluid, the cement paste and completion of compatibility testing were performed as set out by the oil industry standards. In the compatibility test is evaluated rheological properties, thickening time, stability and compressive strength of cement pastes. We also conducted analyzes of scanning electron microscopy and X-ray diffraction of the mixture obtained by the compatibility test to determine the microstructural changes in cement pastes. The compatibility test showed no visual changes in the properties of the cement paste, as phase separation. However, after the addition of nonaqueous drilling fluid to cement slurry there was an increased amount of plastic viscosity, the yield point and gel strength. Among the major causative factors can include: chemical reaction of the components present in the non-aqueous drilling fluid as the primary emulsifier, wetting agent and paraffin oil, with the chemical constituents of the cement. There was a reduction in the compressive strength of the cement paste after mixing with this drilling fluid. Thickening test showed that the oil wetting agent and high salinity of the non-aqueous fluid have accelerating action of the handle of the cement paste time. The stability of the cement paste is impaired to the extent that there is increased contamination of the cement slurry with the nonaqueous fluid. The X-ray diffraction identified the formation of portlandite and calcium silicate in contaminated samples. The scanning electron microscopy confirmed the development of the identified structures in the X-ray diffraction and also found the presence of wells in the cured cement paste. The latter, formed by the emulsion stability of the drilling fluid in the cement paste, corroborate the reduction of mechanical strength. The oil wetting agent component of the non-aqueous drilling fluid, the modified cement hydration processes, mainly affecting the setting time.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A escassez de parâmetros técnicos e científicos e o caráter subjetivo que em regra preside à escolha de determinado material, produto ou técnica suscitaram o interesse pelo presente tema onde se procurou aumentar as ferramentas de análise e de apoio à decisão em intervenções de conservação do património azulejar. Procurou compreender-se o azulejo a nível histórico, estético, técnico e material, estudando-o do ponto de vista físico, químico e mineralógico. Comparando o azulejo com as réplicas produzidas para intervenções de conservação e restauro estudadas, concluiu-se que as suas composições, química e mineralógica, são diferentes, embora não se verifiquem tantas dissemelhanças ao nível das propriedades físicas. As linhas orientadoras da conservação e restauro de azulejo foram lançadas por Santos Simões a partir dos anos 40 do séc. XX e, desde então, foi-se desenvolvendo um pouco à margem das restantes áreas de especialidade, mesmo ao nível do ensino. Os resultados do inquérito internacional junto dos profissionais que trabalham em conservação e restauro de azulejo in situ corroboram de certo modo este facto e, simultaneamente, permitem uma apreensão da situação atual. Constatou-se uma quase total ausência de documentação sobre intervenções realizadas, mas a análise de casos de estudo e de relatórios permitiu uma primeira sistematização da informação disponível segundo os materiais correntemente utilizados. Procedeu-se a uma identificação e tipificação de patologias decorrentes das intervenções procurando entender qual o papel que tiveram os materiais utilizados e as técnicas de intervenção no desempenho das intervenções. Os processos de reintegração volumétrica e cromática mereceram uma maior atenção, procedendo-se à simulação de todo o sistema, em contexto laboratorial, com base nos materiais correntemente utilizados. Os resultados revelam comportamento diferenciado dos materiais de origem orgânica e inorgânica, evidenciando estes últimos uma maior compatibilidade com o azulejo, mas um pior desempenho a médio/longo prazo. O reconhecimento das soluções mais ou menos compatíveis permitiu delinear uma metodologia de avaliação da compatibilidade, da eficácia e do desempenho dos materiais e das técnicas utilizadas, contribuindo também para a definição de algumas recomendações e de critérios de atuação; Abstract The lack of information found, when selecting a material, product or technique, to apply on a specific conservation treatment contributed to the interest on this topic. The historical, aesthetic and technical characteristics of the azulejo was researched by studying their physical, chemical and mineralogical properties. Comparing original azulejos with the replicas produced for conservation treatments studied, it was concluded that the chemical and mineralogical composition is different, although there are less dissimilarities in terms of physical properties. The guidelines for conservation and restoration were launched by Santos Simões in the 40s and since then, it has been developing a bit on the sidelines of the remaining areas of expertise, even at an educational level. The results of an international survey, near professionals working in conservation and restoration of azulejo in situ, corroborate this fact and simultaneously allow an insight of the current situation. It was found an almost complete lack of technical documentation about previous conservation interventions, but the analysis of existent case studies and intervention reports permitted a systematization of the available information, also considering the materials commonly used. The identification and characterization of damages resulting from interventions, was performed trying to establish a correlation with the materials used and intervention techniques. The attention focused on the study of the infills and chromatic reintegration and a simulation of the entire system was developed, in a laboratory context, on the basis of commonly used materials. The results reveal a distinct behavior between the organic and inorganic materials, showing the latter greater compatibility with the azulejos but a worse medium/long-term performance. The recognition of more or less compatible solutions allowed to outline a methodology to evaluate the compatibility, efficiency and performance of materials and techniques used, also contributing to define some recommendations and action criteria.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

presente Trabalho de Investigação Aplicada, incide sobre a temática do Agrupamento de Armas Combinadas “LEODUR”, um Agrupamento que emprega o Carro de Combate Leopard 2A6, com a Viatura Blindada de Rodas Pandur II (8x8) Infantry Carrier Vehicle e a Viatura Blindada de Rodas Pandur II (8x8) Infantry Fighting Vehicle, num contexto doutrinário de Armas Combinadas. Devido ao facto de algumas destas viaturas serem de lagartas e outras serem de rodas, a sua combinação poderá não trazer maiores vantagens do que aquelas que cada meio traz se atuar separadamente. É nesta problemática que se pretende investigar quais as potencialidades e vulnerabilidades do uso simultâneo destes meios e se valerá realmente a pena utiliza-los de forma combinada. Pretende-se com esta Investigação, explicar de que forma as viaturas Pandur II (8x8) e o Leopard 2A6 são compatíveis num contexto de Armas Combinadas em Território Nacional, numa unidade de escalão Batalhão (Agrupamento). A investigação em si segue as orientações do Método Hipotético-Dedutivo, pelo que serão levantadas um conjunto de hipóteses a ser confirmadas e/ou infirmadas. A recolha de dados será principalmente através de documentos, como manuais doutrinários, revistas, inquéritos por entrevistas e ainda pela observação direta do Exercício Lince 2016. A aplicação simultânea destas duas tipologias de viaturas traduz-se num enorme Poder de Fogo, elevada Proteção e Mobilidade para um Agrupamento, com a valência de utilizarem meios de Comando e Controlo iguais, possibilitando maior rapidez nas comunicações e uma permanente visualização do Campo de Batalha.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Desde o primeiro registro da presença destrutiva de Meloidogyne enterolobii, em 2001, em áreas de goiabeira no Vale do São Francisco (VSF), nos estados da Bahia e de Pernambuco, a ocorrência desse nematoide passou a ter dimensão nacional, sendo relatado em outros 17 estados brasileiros, constituindo-se no principal desafio para a cultura. Práticas de controle do patógeno, como uso de nematicidas, controle biológico, adubações nitrogenadas, plantas não hospedeiras e manejo integrado, têm efeito limitado ou ineficiente (Freitas, 2012). O impacto inicial direto do nematoide na cultura da goiabeira foi estimado em quase US$ 70 milhões em todo o Brasil (Pereira et al., 2009), com redução inicial de até 50% da área plantada no VSF.