On Class-based Isolation of UDP, Short-lived and Long-lived TCP Flows

The congestion control mechanisms of TCP make it vulnerable in an environment where flows with different congestion-sensitivity compete for scarce resources. With the increasing amount of unresponsive UDP traffic in today's Internet, new mechanisms are needed to enforce fairness in the core of the network. We propose a scalable Diffserv-like architecture, where flows with different characteristics are classified into separate service queues at the routers. Such class-based isolation provides protection so that flows with different characteristics do not negatively impact one another. In this study, we examine different aspects of UDP and TCP interaction and possible gains from segregating UDP and TCP into different classes. We also investigate the utility of further segregating TCP flows into two classes, which are class of short and class of long flows. Results are obtained analytically for both Tail-drop and Random Early Drop (RED) routers. Class-based isolation have the following salient features: (1) better fairness, (2) improved predictability for all kinds of flows, (3) lower transmission delay for delay-sensitive flows, and (4) better control over Quality of Service (QoS) of a particular traffic type.

Differentiated Predictive Fair Service for TCP Flows

The majority of the traffic (bytes) flowing over the Internet today have been attributed to the Transmission Control Protocol (TCP). This strong presence of TCP has recently spurred further investigations into its congestion avoidance mechanism and its effect on the performance of short and long data transfers. At the same time, the rising interest in enhancing Internet services while keeping the implementation cost low has led to several service-differentiation proposals. In such service-differentiation architectures, much of the complexity is placed only in access routers, which classify and mark packets from different flows. Core routers can then allocate enough resources to each class of packets so as to satisfy delivery requirements, such as predictable (consistent) and fair service. In this paper, we investigate the interaction among short and long TCP flows, and how TCP service can be improved by employing a low-cost service-differentiation scheme. Through control-theoretic arguments and extensive simulations, we show the utility of isolating TCP flows into two classes based on their lifetime/size, namely one class of short flows and another of long flows. With such class-based isolation, short and long TCP flows have separate service queues at routers. This protects each class of flows from the other as they possess different characteristics, such as burstiness of arrivals/departures and congestion/sending window dynamics. We show the benefits of isolation, in terms of better predictability and fairness, over traditional shared queueing systems with both tail-drop and Random-Early-Drop (RED) packet dropping policies. The proposed class-based isolation of TCP flows has several advantages: (1) the implementation cost is low since it only requires core routers to maintain per-class (rather than per-flow) state; (2) it promises to be an effective traffic engineering tool for improved predictability and fairness for both short and long TCP flows; and (3) stringent delay requirements of short interactive transfers can be met by increasing the amount of resources allocated to the class of short flows.

Admission control schemes for TCP elastic traffic in class-based networks

En aquesta tesi proposem dos esquemes de xarxa amb control d'admissió per al trànsit elàstic TCP amb mecanismes senzills. Ambdós esquemes són capaços de proporcionar throughputs diferents i aïllament entre fluxos, on un "flux" es defineix com una seqüència de paquets relacionats dins d'una connexió TCP. Quant a l'arquitectura, ambdós fan servir classes de paquets amb diferents prioritats de descart, i un control d'admissió implícit, edge-to-edge i basat en mesures. En el primer esquema, les mesures són per flux, mentre que en el segon, les mesures són per agregat. El primer esquema aconsegueix un bon rendiment fent servir una modificació especial de les fonts TCP, mentre que el segon aconsegueix un bon rendiment amb fonts TCP estàndard. Ambdós esquemes han estat avaluats satisfactòriament a través de simulació en diferents topologies de xarxa i càrregues de trànsit.

MIT SchMUSE: Class-Based Remote Delegation in a Capricious Distributed Environment

MIT SchMUSE (pronounced "shmooz") is a concurrent, distributed, delegation-based object-oriented interactive environment with persistent storage. It is designed to run in a "capricious" network environment, where servers can migrate from site to site and can regularly become unavailable. Our design introduces a new form of unique identifiers called "globally unique tickets" that provide globally unique time/space stamps for objects and classes without being location specific. Object location is achieved by a distributed hierarchical lazy lookup mechanism that we call "realm resolution." We also introduce a novel mechanism called "message deferral" for enhanced reliability in the face of remote delegation. We conclude with a comparison to related work and a projection of future work on MIT SchMUSE.

Control design for multicast-aware class-based networks

The expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.

Performance-based compensation vs. guaranteed compensation: contractual incentives and performance

Top management from retail banks must delegate authority to lower-level managers to operate branches and service centers. Doing so, they must navigate through conflicts of interest, asymmetric information and limited monitoring in designing compensation plans for such agents. Pursuant to this delegation, the banks adopt a system of performance targets and incentives to align the interests of senior management and unit managers. This paper evaluates the causal relationship between performance-based salaries and managers’ effective performance. We use a fixed effects estimator to analyze an unbalanced panel of data from one of the largest Brazilian retail banks during the period from January 2007 to June 2009. The results indicate that agents with guaranteed variable salary contracts demonstrate inferior performance compared with agents who have performance-based compensation packages. We conclude that there is a moral hazard that can be observed in the behavior of agents who are subject to guaranteed variable salary contracts.

Virus isolation vs RT-PCR: which method is more successful in detecting VHSV and IHNV in fish tissue sampled under field conditions?

This study compared the results of reverse transcription-polymerase chain reaction (RT-PCR) and traditional virus isolation on cell culture in detection of viral haemorrhagic septicaemia virus (VHSV) and infectious haematopoietic necrosis virus (IHNV). RT-PCR was used for 172 tissue sample pools (total of 859 fish) originating from a field survey on the occurrence of VHSV and IHNV in farmed and wild salmonids in Switzerland. These samples represented all sites with fish that were either identified as virus-positive by means of virus isolation (three sites, four positive tissue sample pools) and/or demonstrated positive anti-VHSV-antibody titres (83 sites, 121 positive blood samples) in a serum plaque neutralization test (SPNT). The RT-PCR technique confirmed the four VHSV-positive tissue sample pools detected by virus isolation and additionally identified one VHSV-positive sample that showed positive anti-VHSV-AB titres, but was negative in virus isolation. With IHNV, RT-PCR detected two positive samples not identified by virus isolation while in these fish the SPNT result had been questionable. One of the IHNV-positive samples represents the first detection of IHNV-RNA in wild brown trout in Switzerland. Compared to SPNT, the RT-PCR method detected, as with virus isolation, a much lower number of positive cases; reasons for this discrepancy are discussed. Our results indicate that RT-PCR can not only be successfully applied in field surveys, but may also be slightly more sensitive than virus isolation. However, in a titration experiment under laboratory conditions, the sensitivity of RT-PCR was not significantly higher when compared with virus isolation.

A comparison of landslide inventories along the shoreline of Steamboat Island Peninsula, Thurston County, WA: office based protocol vs. field based protocol

The mountain ranges and coastlines of Washington State have steep slopes, and they are susceptible to landslides triggered by intense rainstorms, rapid snow melts, earthquakes, and rivers and waves removing slope stability. Over a 30-year timespan (1984-2014 and includes State Route (SR) 530), a total of 28 deep-seated landslides caused 300 million dollars of damage and 45 deaths (DGER, 2015). During that same timeframe, ten storm events triggered shallow landslides and debris flows across the state, resulting in nine deaths (DGER, 2015). The loss of 43 people, due to the SR 530 complex reactivating and moving at a rate and distance unexpected to residents, highlighted the need for an inventory of the stateís landslides. With only 13% of the state mapped (Lombardo et al., 2015), the intention of this statewide inventory is to communicate hazards to citizens and decision makers. In order to compile an accurate and consistent landslide inventory, Washington needs to adopt a graphic information system (GIS) based mapping protocol. A mapping protocol provides consistency for measuring and recording information about landslides, including such information as the type of landslide, the material involved, and the size of the movement. The state of Oregon shares similar landslide problems as Washington, and it created a GIS-based mapping protocol designed to inform its residents, while also saving money and reducing costly hours in the field (Burns and Madin, 2009). In order to determine if the Oregon Department of Geology and Mineral Industries (DOGAMI) protocol, developed by Burns and Madin (2009), could serve as the basis for establishing Washingtonís protocol, I used the office-based DOGAMI protocol to map landslides along a 40-50 km (25-30 mile) shoreline in Thurston County, Washington. I then compared my results to the field-based landslide inventory created in 2009 by the Washington Division of Geology and Earth Resources (DGER) along this same shoreline. If the landslide area I mapped reasonably equaled the area of the DGER (2009) inventory, I would consider the DOGAMI protocol useful for Washington, too. Utilizing 1m resolution lidar flown for Thurston County in 2011 and a GIS platform, I mapped 36 landslide deposits and scarp flanks, covering a total area of 879,530 m2 (9,467,160 ft2). I also found 48 recent events within these deposits. With an exception of two slides, all of the movements occurred within the last fifty years. Along this same coastline, the DGER (2009) recorded 159 individual landslides and complexes, for a total area of 3,256,570 m2 (35,053,400 ft2). At a first glance it appears the DGER (2009) effort found a larger total number and total area of landslides. However, in addition to their field inventory, they digitized landslides previously mapped by other researchers, and they did not field confirm these landslides, which cover a total area of 2,093,860 m2 (22,538,150 ft2) (DGER, 2009). With this questionable landslide area removed and the toes and underwater landslides accounted for because I did not have a bathymetry dataset, my results are within 6,580 m2 (70,840 ft2) of the DGERís results. This similarity shows that the DOGAMI protocol provides a consistent and accurate approach to creating a landslide inventory. With a few additional modifications, I recommend that Washington State adopts the DOGAMI protocol. Acquiring additional 1m lidar and adopting a modified DOGAMI protocol poises the DGER to map the remaining 87% of the state, with an ultimate goal of informing citizens and decision makers of the locations and frequencies of landslide hazards on a user-friendly GIS platform.

Documenting reproduction and inequality : revisiting Jean Anyon’s “Social class and school knowledge”

Jean Anyon’s (1981) “Social class and school knowledge” was a landmark work in North American educational research. It provided a richly detailed qualitative description of differential, social-class-based constructions of knowledge and epistemological stance. This essay situates Anyon’s work in two parallel traditions of critical educational research: the sociology of the curriculum and classroom interaction and discourse analysis. It argues for the renewed importance of both quantitative and qualitative research on social reproduction and equity in the current policy context.

Disposable maps : ad hoc location sharing

The gathering of people in everyday life is intertwined with travelling to negotiated locations. As a result, mobile phones are often used to rearrange meetings when one or more participants are late or cannot make it on time. Our research is based on the hypothesis that the provision of location data can enhance the experience of people who are meeting each other in different locations. This paper presents work-in-progress on a novel approach to share one’s location data in real-time which is visualised on a web-based map in a privacy conscious way. Disposable Maps allows users to select contacts from their phone’s address book who then receive up-to-date location data. The utilisation of peer-to-peer notifications and the application of unique URLs for location storage and presentation enable location sharing whilst ensuring users’ location privacy. In contrast to other location sharing services like Google Latitude, Disposable Maps enables ad hoc location sharing to actively selected location receivers for a fixed period of time in a specific given situation. We present first insights from an initial application user test and show future work on the approach of disposable information allocation.

Modeling, stability analysis and control of microgrid

With the increase in the level of global warming, renewable energy based distributed generators (DGs) will increasingly play a dominant role in electricity production. Distributed generation based on solar energy (photovoltaic and solar thermal), wind, biomass, mini-hydro along with use of fuel cells and micro turbines will gain considerable momentum in the near future. A microgrid consists of clusters of load and distributed generators that operate as a single controllable system. The interconnection of the DG to the utility/grid through power electronic converters has raised concern about safe operation and protection of the equipments. Many innovative control techniques have been used for enhancing the stability of microgrid as for proper load sharing. The most common method is the use of droop characteristics for decentralized load sharing. Parallel converters have been controlled to deliver desired real power (and reactive power) to the system. Local signals are used as feedback to control converters, since in a real system, the distance between the converters may make the inter-communication impractical. The real and reactive power sharing can be achieved by controlling two independent quantities, frequency and fundamental voltage magnitude. In this thesis, an angle droop controller is proposed to share power amongst converter interfaced DGs in a microgrid. As the angle of the output voltage can be changed instantaneously in a voltage source converter (VSC), controlling the angle to control the real power is always beneficial for quick attainment of steady state. Thus in converter based DGs, load sharing can be performed by drooping the converter output voltage magnitude and its angle instead of frequency. The angle control results in much lesser frequency variation compared to that with frequency droop. An enhanced frequency droop controller is proposed for better dynamic response and smooth transition between grid connected and islanded modes of operation. A modular controller structure with modified control loop is proposed for better load sharing between the parallel connected converters in a distributed generation system. Moreover, a method for smooth transition between grid connected and islanded modes is proposed. Power quality enhanced operation of a microgrid in presence of unbalanced and non-linear loads is also addressed in which the DGs act as compensators. The compensator can perform load balancing, harmonic compensation and reactive power control while supplying real power to the grid A frequency and voltage isolation technique between microgrid and utility is proposed by using a back-to-back converter. As utility and microgrid are totally isolated, the voltage or frequency fluctuations in the utility side do not affect the microgrid loads and vice versa. Another advantage of this scheme is that a bidirectional regulated power flow can be achieved by the back-to-back converter structure. For accurate load sharing, the droop gains have to be high, which has the potential of making the system unstable. Therefore the choice of droop gains is often a tradeoff between power sharing and stability. To improve this situation, a supplementary droop controller is proposed. A small signal model of the system is developed, based on which the parameters of the supplementary controller are designed. Two methods are proposed for load sharing in an autonomous microgrid in rural network with high R/X ratio lines. The first method proposes power sharing without any communication between the DGs. The feedback quantities and the gain matrixes are transformed with a transformation matrix based on the line R/X ratio. The second method involves minimal communication among the DGs. The converter output voltage angle reference is modified based on the active and reactive power flow in the line connected at point of common coupling (PCC). It is shown that a more economical and proper power sharing solution is possible with the web based communication of the power flow quantities. All the proposed methods are verified through PSCAD simulations. The converters are modeled with IGBT switches and anti parallel diodes with associated snubber circuits. All the rotating machines are modeled in detail including their dynamics.

Imagining neighbourhood-based community : an autoethnography

This research is an autoethnographic investigation of consumption experiences, public and quasi-public spaces, and their relationship to community within an inner city neighbourhood. The research specifically focuses on the gentrifying inner city, where class-based processes of change can have implications for people’s abilities to remain within, or feel connected to place. However, the thesis draws on broader theories of the throwntogetherness of the contemporary city (e.g., Amin and Thrift, 2002; Massey 2005) to argue that the city is a space where place-based meanings cannot be seen to be fixed, and are instead better understood as events of place – based on ever shifting interrelations between the trajectories of people and things. This perspective argues the experience of belonging to community is not just born of a social encounter, but also draws on the physical and symbolic elements of the context in which it is situated. The thesis particularly explores the ways people construct identifications within this shifting urban environment. As such, consumption practices and spaces offer one important lens through which to explore the interplay of the physical, social and symbolic. Consumer research tells us that consumption practices can facilitate experiences in which identity-defining meaning can be generated and shared. Consumption spaces can also support different kinds of collective identification – as anchoring realms for specific cultural groups or exposure realms that enable individuals to share in the identification practices of others with limited risk (Aubert-Gamet & Cova, 1999). Furthermore, the consumption-based lifestyles that gentrifying inner city neighbourhoods both support and encourage can also mean that consumption practices may be a key reason that people are moving through public space. That is, consumption practices and spaces may provide a purpose for which – and spatial frame against which – our everyday interactions and connections with people and objects are undertaken within such neighbourhoods. The purpose of this investigation then was to delve into the subjectivities at the heart of identifying with places, using the lens of our consumption-based experiences within them. The enquiry describes individual and collective identifications and emotional connections, and explores how these arise within and through our experiences within public and quasi-public spaces. It then theorises these ‘imaginings’ as representative of an experience of community. To do so, it draws on theories of imagination and its relation to community. Theories of imagined community remind us that both the values and identities of community are held together by projections that create relational links out of objects and shared practices (e.g., Benedict Anderson, 2006; Urry, 2000). Drawing on broader theories of the processes of the imagination, this thesis suggests that an interplay between reflexivity and fantasy – which are products of the critical and the fascinated consciousness – plays a role in this imagining of community (e.g., Brann, 1991; Ricoeur, 1994). This thesis therefore seeks to explore how these processes of imagining are implicated within the construction of an experience of belonging to neighbourhood-based community through consumption practices and the public and quasi-public spaces that frame them. The key question of this thesis is how do an individual’s consumption practices work to construct an imagined presence of neighbourhood-based community? Given the focus on public and quasi-public spaces and our experiences within them, the research also asked how do experiences in the public and quasi-public spaces that frame these practices contribute to the construction of this imagined presence? This investigation of imagining community through consumption practices is based on my own experiences of moving to, and attempting to construct community connections within, an inner city neighbourhood in Melbourne, Australia. To do so, I adopted autoethnographic methodology. This is because autoethnography provides the methodological tools through which one can explore and make visible the subjectivities inherent within the lived experiences of interest to the thesis (Ellis, 2004). I describe imagining community through consumption as an extension of a placebased self. This self is manifest through personal identification in consumption spaces that operate as anchoring realms for specific cultural groups, as well as through a broader imagining of spaces, people, and practices as connected through experiences within realms of exposure. However, this is a process that oscillates through cycles of identification; these anchor one within place personally, but also disrupt those attachments. This instability can force one to question the orientation and motives of these imaginings, and reframe them according to different spaces and reference groups in ways that can also work to construct a more anonymous and, conversely, more achievable collective identification. All the while, the ‘I’ at the heart of this identification is in an ongoing process of negotiation, and similarly, the imagined community is never complete. That is, imagining community is a negotiation, with people and spaces – but mostly with the different identifications of the self. This thesis has been undertaken by publication, and thus the process of imagining community is explored and described through four papers. Of these, the first two focus on specific types of consumption spaces – a bar and a shopping centre – and consider the ways that anchoring and exposure within these spaces support the process of imagining community. The third paper examines the ways that the public and quasi-public spaces that make up the broader neighbourhood context are themselves throwntogether as a realm of exposure, and considers the ways this shapes my imaginings of this neighbourhood as community. The final paper develops a theory of imagined community, as a process of comparison and contrast with imagined others, to provide a summative conceptualisation of the first three papers. The first paper, chapter five, explores this process of comparison and contrast in relation to authenticity, which in itself is a subjective assessment of identity. This chapter was written as a direct response to the recent work of Zukin (2010), and draws on theories of authenticity as applied to personal and collective identification practices by consumer researchers Arnould and Price (2000). In this chapter, I describe how my assessments of the authenticity of my anchoring experiences within one specific consumption space, a neighbourhood bar, are evaluated in comparison to my observations of and affective reactions to the social practices of another group of residents in a different consumption space, the local shopping centre. Chapter five also provides an overview of the key sites and experiences that are considered in more detail in the following two chapters. In chapter six, I again draw on my experiences within the bar introduced in chapter five, this time to explore the process of developing a regular identity within a specific consumption space. Addressing the popular theory of the cafe or bar as third place (Oldenburg, 1999), this paper considers the purpose of developing anchored relationships with people within specific consumption spaces, and explores the different ways this may be achieved in an urban context where the mobilities and lifestyle practices of residents complicate the idea of a consumption space as an anchoring or third place. In doing so, this chapter also considers the manner in which this type of regular identification may be seen to be the beginning of the process of imagining community. In chapter seven, I consider the ways the broader public spaces of the neighbourhood work cumulatively to expose different aspects of its identity by following my everyday movements through the neighbourhood’s shopping centre and main street. Drawing on the theories of Urry (2000), Massey (2005), and Amin (2007, 2008), this chapter describes how these spaces operate as exposure realms, enabling the expression of different senses of the neighbourhood’s spaces, times, cultures, and identities through their physical, social, and symbolic elements. Yet they also enable them to be united: through habitual pathways, group practices of appropriation of space, and memory traces that construct connections between objects and experiences. This chapter describes this as a process of exposure to these different elements. Our imagination begins to expand the scope of the frames onto which it projects an imagined presence; it searches for patterns within the physical, social, and symbolic environment and draws connections between people and practices across spaces. As the final paper, chapter eight, deduces, it is in making these connections that one constructs the objects and shared practices of imagined community. This chapter describes this as an imagining of neighbourhood as a place-based extension of the self, and then explores the ways in which I drew on physical, social, and symbolic elements in an attempt to construct a fit between the neighbourhood’s offerings and my desires for place-based identity definition. This was as a cumulative but fragmented process, in which positive and negative experiences of interaction and identification with people and things were searched for their potential to operate as the objects and shared practices of imagined community. This chapter describes these connections as constructed through interplay between reflexivity and fantasy, as the imagination seeks balance between desires for experiences of belonging, and the complexities of constructing them within the throwntogether context of the contemporary city. The conclusion of the thesis describes the process of imagining community as a reflexive fantasy, that is, as a product of both the critical and fascinated consciousness (Ricoeur, 1994). It suggests that the fascinated consciousness imbues experiences with hope and desire, which the reflexive imagining can turn to disappointment and shame as it critically reflects on the reality of those fascinated projections. At the same time, the reflexive imagination also searches the practices of others for affirmation of those projections, effectively seeking to prove the reality of the fantasy of the imagined community.