New light from an old reagent: chemiluminescence from the reaction of potassium permanganate with sodium borohydride

When aqueous sodium borohydride (50 mM) is added to a solution of potassium permanganate (1mM, in sodium hexametaphosphate) at acidic pH, bright red-orange emission is easily visible in a darkened room. This chemiluminescence emission is due to an excited state of manganese (II) that undergoes solution phase phosphorescence and provides an excellent opportunity for students to explore the relationship between the initial oxidation state of the manganese and the likelihood of luminescence. Not surprisingly Mn(VII), Mn(IV) and Mn(III) all give rise to chemiluminescence where as Mn(II) fails to react.

Tris(2,2´-bipyridyl)ruthenium(II) chemiluminescence

This paper critically reviews analytical applications of the chemiluminescence from tris(2,2-bipyridyl)ruthenium(II) and related compounds published in the open literature between mid-1998 and October 2005. Following the introduction, which summarises the reaction chemistry and reagent generation, the review divides into three major sections that focus on: (i) the techniques that utilise this type of detection chemistry, (ii) the range of analytes that can be determined, and (iii) analogues and derivatives of tris(2,2-bipyridyl)ruthenium(II).

Near-ultraviolet chemiluminescence from the reaction of ammonia with hypobromite in aqueous solution

The chemiluminescence arising from the oxidation of ammonium chloride by sodium hypobromite in aqueous alkaline solution includes a series of peaks in the near-ultraviolet, which is not commonly observed in liquid-phase chemiluminescence. The dominant peak in that region has an intensity maximum at 292 nm and smaller peaks are observed at 313, 334 and 356 nm. The emitted photons are of similar energy to the Vergard–Kaplan transition of molecular nitrogen, a major product of this reaction. However, the spectral distribution is different to that of previously reported gas-phase chemiluminescence attributed to the Vergard–Kaplan transition.

A rapid test for heroin (3,6-Diacetylmorphine) based on two chemiluminescence reactions

A rapid method for screening drug seizure samples for 3,6-diacetylmorphine (heroin), which consists of a simple hydrolysis procedure and flow-injection analysis with two chemiluminescence reagents, is described. Before hydrolysis, 3,6-diacetylmorphine evokes an intense response with a tris(2,2'-bipyridyl)ruthenium(III) reagent (prepared by dissolving the perchlorate salt in acetonitrile), and a relatively weak chemiluminescence response with a second reagent: potassium permanganate in an aqueous acidic polyphosphate solution. However, the permanganate reagent is extremely sensitive toward the hydrolysis products of 3,6-diacetylmorphine (i.e., 6-monoacetylmorphine and morphine). Some compounds commonly found in drug laboratories may cause false positives with tris(2,2'-bipyridyl)ruthenium(III), but do not produce the markedly increased response with the permanganate reagent after the hydrolysis procedure. The combination of these two tests therefore provides an effective presumptive test for the presence of 3,6-diacetylmorphine, which we have verified with 14 samples obtained from a forensic science laboratory.

The determination of psilocin and psilocybin in hallucinogenic mushrooms by HPLC utilizing a dual reagent acidic potassium permanganate and tris(2,2´-bipyridyl)ruthenium(II) chemiluminescence detection system

This paper describes a procedure for the determination of psilocin and psilocybin in mushroom extracts using high-performance liquid chromatography with postcolumn chemiluminescence detection. A number of extraction methods for psilocin and psilocybin in hallucinogenic mushrooms were investigated, with a simple methanolic extraction being found to be most effective. Psilocin and psilocybin were extracted from a variety of hallucinogenic mushrooms using methanol. The analytes were separated on a C₁₂ column using a (95:5% v/v) methanol:10 mM ammonium formate, pH 3.5 mobile phase with a run time of 5 min. Detection was realized through a dual reagent chemiluminescence detection system of acidic potassium permanganate and tris(2,2'-bipyridyl)ruthenium(II). The chemiluminescence detection system gave improved detectability when compared with UV absorption at 269 nm, with detection limits of 1.2 × 10⁻⁸ and 3.5 × 10⁻⁹ mol/L being obtained for psilocin and psilocybin, respectively. The procedure was applied to the determination of psilocin and psilocybin in three Australian species of hallucinogenic mushroom.

The determination of morphine in the larvae of calliphora stygia using flow injection analysis and HPLC with chemiluminescence detection

Selective determination of morphine in the larvae of Calliphora stygia (Fabricius) (Diptera: Calliphoridae) using acidic potassium permanganate chemiluminescence detection coupled with flow injection analysis and high-performance liquid chromatography (HPLC) is described. Larvae of C. stygia were reared on minced meat substrates that had been spiked with varying concentrations of morphine. Morphine concentrations were chosen to reflect typical levels in human tissues from opiate overdose victims. After maturing on substrates, larvae were analyzed for the presence of morphine using chemiluminescence detection coupled to flow injection analysis and a rapid HPLC method. Analysis of the larval matrix by flow injection analysis with chemiluminescence detection indicated the presence of interferants capable of generating chemiluminescence. A rapid chromatographic separation with a monolithic column allowed selective determination of morphine in larvae using postcolumn chemiluminescence detection. Larvae of C. stygia reared on substrates containing morphine at concentrations of 500 and 1000 ng/g did not sequester morphine at detectable concentrations. Larvae reared on substrates containing morphine concentrations of 2500, 5000, and 10,000 ng/g tested positive for the drug at concentrations of 765, 2720, and 3010 ng/g, respectively.

Acidic potassium permanganate as a chemiluminescence reagent – a review

A critical and comprehensive review of acidic potassium permanganate chemiluminescence is presented. This includes discussion on reaction conditions, the influence of enhancers such as polyphosphates, formaldehyde and sulfite, the relationship between analyte structure and chemiluminescence intensity, and the application of this chemistry to determine a wide variety of compounds, such as pharmaceuticals, biomolecules, antioxidants, illicit drugs, pesticides and pollutants. Previous proposals for the nature of the emitting species are re-evaluated in light of recent evidence.

Rapid determination of papaver somniferum alkaloids in process streams using monolithic column high-performance liquid chromatography with chemiluminescence detection

We have combined high-performance liquid chromatography (HPLC) separations using a monolithic column with acidic potassium permanganate and tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection in a rapid and highly sensitive method to monitor the process of extracting opiate alkaloids from Papaver somniferum. Due to the high flow rates allowed with the monolithic column and the inherent selectivity of the chemiluminescence reactions, the four predominant alkaloids – morphine, codeine, oripavine and thebaine – were determined in less than 2 min. The results obtained with numerous process samples compared favourable with those of the standard HPLC methodology. Limits of detection were 1 × 10⁻¹⁰ M, 5 × 10⁻¹⁰ M, 5 × 10⁻¹⁰ M and 1 × 10⁻⁹ M, for morphine, codeine, oripavine and thebaine, respectively.

Soluble manganese(IV) as a chemiluminescence reagent for the determination of opiate alkaloids, indoles and analytes of forensic Interest

We present the results of our investigations into the use of soluble manganese(IV) as a chemiluminescence reagent, which include a significantly faster method of preparation and a study on the effect of formaldehyde and orthophosphoric acid concentration on signal intensity. Chemiluminescence detection was applied to the determination of 16 analytes, including opiate alkaloids, indoles and analytes of forensic interest, using flow injection analysis methodology. The soluble manganese(IV) reagent was less selective than either acidic potassium permanganate or tris(2,2′-bipyridyl)ruthenium(III) and therefore provided a more universal chemiluminescence detection system for HPLC. A broad spectral distribution with a maximum at 730 ± 5 nm was observed for the reaction between the soluble manganese(IV) and a range of analytes, as well as the background emission from the reaction with the formaldehyde enhancer. This spectral distribution matches that reported for chemiluminescence reactions with acidic potassium permanganate, where a manganese(II) emitting species was elucidated. This provides further evidence that the emission evoked in reactions with soluble manganese(IV) also emanates from a manganese(II) species, and not bimolecular singlet oxygen as suggested by previous authors.

Determination of synephrine in weight-loss products using high performance liquid chromatography with acidic potassium permanganate chemiluminescence detection

Adrenergic amines found in extracts of Citrus aurantium (bitter orange) evoke analytically useful chemiluminescence with acidic potassium permanganate in the presence of polyphosphates. From corrected chemiluminescence spectra, the wavelength of maximum intensity for these reactions was 680 ± 5 nm and, using flow injection analysis methodology, limits of detection for synephrine, octopamine, tyramine and hordenine were found to be between 1 × 10⁻⁹ and 1 × 10⁻⁸ M. We have applied this method of detection to the rapid determination of synephrine in dietary supplements using monolithic column chromatography.

Tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence enhanced by silver nanoparticles

Mixtures of silver(I) and citrate that are used to produce silver nanoparticles evoke intense chemiluminescence with tris(2,2'-bipyridyl)ruthenium(II) and cerium(IV), which can be exploited for the determination of citrate ions and other analytes over a wide concentration range.

Effect of oxidant type on the chemiluminescence intensity from the reaction of tris(2,2’-biyridyl)ruthenium(III) with various organic acids

An investigation into the chemiluminescence of fourteen organic acids and tris(2,2′-bipyridyl)ruthenium(II) was undertaken. Particular emphasis was placed upon the method of production of the reagent, tris(2,2′-bipyridyl)ruthenium(III), with cerium(IV) sulfate, potassium permanganate, lead dioxide and electrochemical generation. Analytically useful chemiluminescence was observed when Ce(IV) or potassium permanganate were employed as oxidants. The kinetics of analyte oxidation was related to the intensity of the chemiluminescence emission, which increased by three orders of magnitude for tartaric acid after 40 h of oxidation.

A sensitive procedure for the rapid determination of arsenic(III) by flow injection analysis and chemiluminescence detection

A novel chemiluminescence flow injection procedure for the determination of As(III) in aqueous samples is described. The method involves injection of As(III) samples into a 1% (m/v) sodium hexametaphosphate in 0.02 M H₂SO₄ carrier stream, which then merges at a Y-piece with a reagent stream consisting of potassium permanganate (5.0 × 10⁻⁵ M) made up in the acidic sodium hexametaphosphate carrier solution. The chemiluminescence intensity of the resulting reaction mixture was measured at a photomultiplier tube operated at a voltage of 0.93 kV. Under optimized conditions, the method is characterised by a linear range from 0.5 to 5.0 μg l⁻¹, a detection limit of 0.3 μg l⁻¹ and a sampling frequency of 150 h⁻¹. The effects of common anionic and cationic interferences were investigated, and it was found that the only ions to cause serious interference were those which react with potassium permanganate, namely sulphide, iodide and ferrous.

Chemiluminescence : gas-phase

Article Outline
• Introduction
• Chemiluminescence of Nitrogen Compounds
• Thermal Energy Analyzer
• Nitrogen-Selective Detector
• Redox Chemiluminescence Detection
• Chemiluminescence of Sulfur Compounds
• Chemiluminescence of Hydrocarbons
• Other Reactions with Ozone
• Flame Photometric Detector
• Other Reagent Gases
• Molecular Fluorine
• Atomic Fluorine
• Atomic Oxygen
• Active Nitrogen
• Atomic Sodium
• Chlorine Dioxide
• Official Methods
• Further Reading