Constructive alignment in Computer Engineering and Informatics departments at Dalarna University : An empirical investigation

Background: Constructive alignment (CA) is a pedagogical approach that emphasizes the alignment between the intended learning outcomes (ILOs), teaching and learning activities (TLAs) and assessment tasks (ATs) as well as creation of a teaching/learning environment where students will be able to actively create their knowledge. Objectives: This paper aims at investigating the extent of constructively-aligned courses in Computer Engineering and Informatics department at Dalarna University, Sweden. This study is based on empirical observations of teacher’s perceptions of implementation of CA in their courses. Methods: Ten teachers (5 from each department) were asked to fill a paper-based questionnaire, which included a number of questions related to issues of implementing CA in courses. Results: Responses to the items of the questionnaire were mixed. Teachers clearly state the ILOs in their courses and try to align the TLAs and ATs to the ILOs. Computer Engineering teachers do not explicitly communicate the ILOs to the students as compared to Informatics teachers. In addition, Computer Engineering teachers stated that their students are less active in learning activities as compared to Informatics teachers. When asked about their subjective ratings of teaching methods all teachers stated that their current teaching is teacher-centered but they try to shift the focus of activity from them to the students. Conclusions: From teachers’ perspectives, the courses are partially constructively-aligned. Their courses are “aligned”, i.e. ILOs, TLAs and ATs are aligned to each other but they are not “constructive” since, according to them, there was a low student engagement in learning activities, especially in Computer Engineering department.

Design, implementation and evaluation of a virtual laboratory for Computer Engineering Education

Broad consensus has been reached within the Education and Cognitive Psychology research communities on the need to center the learning process on experimentation and concrete application of knowledge, rather than on a bare transfer of notions. Several advantages arise from this educational approach, ranging from the reinforce of students learning, to the increased opportunity for a student to gain greater insight into the studied topics, up to the possibility for learners to acquire practical skills and long-lasting proficiency. This is especially true in Engineering education, where integrating conceptual knowledge and practical skills assumes a strategic importance. In this scenario, learners are called to play a primary role. They are actively involved in the construction of their own knowledge, instead of passively receiving it. As a result, traditional, teacher-centered learning environments should be replaced by novel learner-centered solutions. Information and Communication Technologies enable the development of innovative solutions that provide suitable answers to the need for the availability of experimentation supports in educational context. Virtual Laboratories, Adaptive Web-Based Educational Systems and Computer-Supported Collaborative Learning environments can significantly foster different learner-centered instructional strategies, offering the opportunity to enhance personalization, individualization and cooperation. More specifically, they allow students to explore different kinds of materials, to access and compare several information sources, to face real or realistic problems and to work on authentic and multi-facet case studies. In addition, they encourage cooperation among peers and provide support through coached and scaffolded activities aimed at fostering reflection and meta-cognitive reasoning. This dissertation will guide readers within this research field, presenting both the theoretical and applicative results of a research aimed at designing an open, flexible, learner-centered virtual lab for supporting students in learning Information Security.

Estimates of Use of Research-Based Instructional Strategies in Core Electrical or Computer Engineering Courses

Many research-based instruction strategies (RBISs) have been developed; their superior efficacy with respect to student learning has been demonstrated in many studies. Collecting and interpreting evidence about: 1) the extent to which electrical and computer engineering (ECE) faculty members are using RBISs in core, required engineering science courses, and 2) concerns that they express about using them, are important aspects of understanding how engineering education is evolving. The authors surveyed ECE faculty members, asking about their awareness and use of selected RBISs. The survey also asked what concerns ECE faculty members had about using RBISs. Respondent data showed that awareness of RBISs was very high, but estimates of use of RBISs, based on survey data, varied from 10% to 70%, depending on characteristics of the strategy. The most significant concern was the amount of class time that using an RBIS might take; efforts to increase use of RBISs must address this.

Differences between the personal, social and emotional profiles of teaching and computer engineering professionals and students

The evidence suggests that emotional intelligence and personality traits are important qualities that workers need in order to successfully exercise a profession. This article assumes that the main purpose of universities is to promote employment by providing an education that facilitates the acquisition of abilities, skills, competencies and values. In this study, the emotional intelligence and personality profiles of two groups of Spanish students studying degrees in two different academic disciplines – computer engineering and teacher training – were analysed and compared. In addition, the skills forming part of the emotional intelligence and personality traits required by professionals (computer engineers and teachers) in their work were studied, and the profiles obtained for the students were compared with those identified by the professionals in each field. Results revealed significant differences between the profiles of the two groups of students, with the teacher training students scoring higher on interpersonal skills; differences were also found between professionals and students for most competencies, with professionals in both fields demanding more competencies that those evidenced by graduates. The implications of these results for the incorporation of generic social, emotional and personal competencies into the university curriculum are discussed.

Bibliography of technical reports in the fields of computer science and computer engineering issued at the University of Waterloo from 1967 to 1987 /

Includes indexes.

Digital computer engineering.

Mode of access: Internet.

Improving the freshman electrical and computer engineering lab

This thesis covers the challenges of creating and maintaining an introductory engineering laboratory. The history of the University of Illinois Electrical and Computer Engineering department’s introductory course, ECE 110, is recounted. The current state of the course, as of Fall 2008, is discussed along with current challenges arising from the use of a hand-wired prototyping board with logic gates. A plan for overcoming these issues using a new microcontroller-based board with a pseudo hardware description language is discussed. The new microcontroller based system implementation is extensively detailed along with its new accompanying description language. This new system was tried in several sections of the Fall 2008 semester alongside the old system; the students’ final performances with the two different approaches are compared in terms of design, performance, complexity, and enjoyment. The system in its first run shows great promise, increasing the students’ enjoyment, and improving the performance of their designs.

Exploring Engineering

Engineering faculty members at Bucknell University have established a course required for freshman engineering students and open to liberal arts students. The course has been designed to stimulate and enhance student interest in all the engineering disciplines at Bucknell. The course ranges broadly across small groups, faculty-lead recitations, laboratory experiences, student design projects, traditional lectures, and guest speakers. The exploring engineering course has completed its second year. The authors describe the course, the changes made since the initial offering and the impact on the students and faculty involved. They also present and interpret student evaluations of the course.(4 refs)

Design and implementation of a 3D computer game controller using inertial MEMS sensors

Though 3D computer graphics has seen tremendous advancement in the past two decades, most available mechanisms for computer interaction in 3D are high cost and targeted for industry and virtual reality applications. Recent advances in Micro-Electro-Mechanical-System (MEMS) devices have brought forth a variety of new low-cost, low-power, miniature sensors with high accuracy, which are well suited for hand-held devices. In this work a novel design for a 3D computer game controller using inertial sensors is proposed, and a prototype device based on this design is implemented. The design incorporates MEMS accelerometers and gyroscopes from Analog Devices to measure the three components of the acceleration and angular velocity. From these sensor readings, the position and orientation of the hand-held compartment can be calculated using numerical methods. The implemented prototype is utilizes a USB 2.0 compliant interface for power and communication with the host system. A Microchip dsPIC microcontroller is used in the design. This microcontroller integrates the analog to digital converters, the program memory flash, as well as the core processor, on a single integrated circuit. A PC running Microsoft Windows operating system is used as the host machine. Prototype firmware for the microcontroller is developed and tested to establish the communication between the design and the host, and perform the data acquisition and initial filtering of the sensor data. A PC front-end application with a graphical interface is developed to communicate with the device, and allow real-time visualization of the acquired data.

Integrating Generic Competences into Engineering Curricula

The new degrees in Spanish universities generated as a result of the Bologna process, stress a new dimension: the generic competencies to be acquired by university students (leadership, problem solving, respect for the environment, etc.). At Universidad Polite¿cnica de Madrid a teaching model was defined for two degrees: Graduate in Computer Engineering and Graduate in Software Engineering. Such model incorporates the training, development and assessment of generic competencies planned in these curricula. The aim of this paper is to describe how this model was implemented in both degrees. The model has three components. The first refers to a set of seven activities for introducing mechanisms for training, development and assessment of generic competencies. The second component aims to coordinate actions that implement the competencies across courses (in space and time). The third component consists of a series of activities to perform quality control. The implementation of generic competencies was carried out in first year courses (first and second semesters), together with the planning for second year courses (third and fourth semesters). We managed to involve a high percentage of first-year courses (80%) and the contacts that have been initiated suggest a high percentage in the second year as well.

An algorithm for delay checking computer designs.

"Supported in part by the Advanced Research Projects Agency ... under Contract no. US AF 30(602) 4144."

RASCEL: a programmable analog computer based on a regular array of stochastic computing element logic

Thesis--University of Illinois.

Computer design study : access time /

"1-10-1955"

A computer simulation of a large scale academic computer system.

Thesis (M.S.)--University of Illinois.

Proceedings of the Conference on Experimental Research in Computer Systems /

"NSF workshop."--Cover.