Control over the hydrophobic behavior of polystyrene surface by annealing temperature based on capillary template wetting method

The wetting behavior of water droplets was studied on tunable nanostructured polystyrene (PS) surfaces fabricated by temperature-induced capillary template wetting. The surface morphology of PS varied with the annealing temperature. Contact angle (CA) measurements showed that the wettability of polystyrene surfaces could be tuned from hydrophobic (CA = 104°) to superhydrophobic (CA = 161°) by rendering different morphologies, which could be explained by two distinct wetting modes, i.e., the Wenzel and Cassie–Baxter wetting state. Meanwhile, the critical annealing temperature inducing wetting transition between the Wenzel state and Cassie–Baxter state was obtained. This approach could be easily extended to produce superhydrophobic surfaces on other thermoplastic polymers.

The effect of skin passing on the material behavior of metal strip in pure bending and tension

The metal strip used in roll forming has often been preprocessed by (tension or roller) leveling or by skin-pass rolling, and as a consequence, may contain residual stresses. These stresses are not well observed by the tensile test, but could have a significant effect on the bending and springback behavior. With the advent of improved process design techniques for roll forming, including advanced finite element techniques, the need for precise material property data has become important. The major deformation mode of roll forming is that of bending combined with unloading and reverse bending, and hence property data derived from bend tests could be more relevant than that from tensile testing.

This work presents a numerical study on the effect of skin passing on the material behavior of stainless steel strip in pure bending and tension. A two dimensional (2-D) numerical model was developed using Abaqus Explicit to analyze the affect of skin passing on the residual stress profile across a section for various working conditions. The deformed meshes and their final stress fields were then imported as pre-defined fields into Abaqus Standard, and the post-skin passing material behavior in pure bending was determined. The results show that a residual stress profile is introduced into the steel strip during skin passing, and that its shape and stress level depend on the overall thickness reduction as well as the number of rolling passes used in the skin passing process. The material behavior in bending and the amount of springback changed significantly depending on the skin pass condition.

Characterization of the bake-hardening behavior of transformation induced plasticity and dual-phase steels using advanced analytical techniques

The bake-hardening (BH) behavior of TRansformation Induced Plasticity (TRIP) and Dual-Phase (DP) steels after intercritical annealing (IA) has been studied using transmission electron microscopy, X-ray diffraction and three dimensional atom probe tomography. It was found for the DP steel that carbon can segregate to dislocations in the ferrite plastic deformation zones where there is a high dislocation density around the "asquenched" martensite. The carbon pinning of these dislocations, in turn, increases the yield strength after aging. It was shown that bake-hardening also leads to rearrangement of carbon in the martensite leading to the formation of rod-like low temperature carbides in the DP steel. Segregation of carbon to microtwins in retained austenite of the TRIP steel was also evident. These factors, in combination with the dislocation rearrangement in ferrite through the formation of cells and microbands in the TRIP steel after pre-straining, lead to the different bake-hardening responses of the two steels.

A preliminary investigation of the utility of the "Behavior support plan quality evaluation guide II" for use in Australia

Background The quality of behaviour support plans (BSPs) can be an important influence on the quality of the support provided to people with disability who show challenging behaviours. The Behavior Support Plan Quality Evaluation Guide II (BSP-QE II) is one tool that may be useful in assessing the quality of behaviour support plans. It has previously been used to assess BSPs to support children in schools in the USA. In this preliminary study, we examined the utility of the BSP-QE II for assessing behaviour support plans designed for adults with an intellectual disability in community support services in Australia.

Method  Experienced practitioners were surveyed concerning the relevance of BSP-QE II components to the evaluation of BSPs in Australia, and an audit was conducted of randomly selected BSPs submitted as a statutory requirement to the Office of the Senior Practitioner.

Results  The BSP-QE II showed evidence of acceptable construct validity and interrater reliability. There was evidence of a need for substantial improvement in the quality of BSPs, consistent with previous findings conducted using other audit tools.

Conclusions The findings support the utility of the BSP-QE II, to inform and evaluate service planning in supporting adults with intellectual disability who show challenging behaviour.

Understanding the behavior of advanced high-strength steels using atom probe tomography

The key evidence for understanding the mechanical behavior of advanced high strength steels was provided by atom probe tomography (APT). Chemical overstabilization of retained austenite (RA) leading to the limited transformation-induced plasticity (TRIP) effect was deemed to be the main factor responsible for the low ductility of nanostructured bainitic steel. Appearance of the yield point on the stress-strain curve of prestrained and bake-hardened transformationinduced plasticity steel is due to the unlocking from weak carbon atmospheres of newly formed during prestraining dislocations.

Influencing health equity : role of the effective consumer scale in measuring skills and abilities in a middle income country

The 2008 World Health Report emphasizes the need for patient-centered primary care service delivery models in which patients are equal partners in the planning and management of their health. It is argued that this involvement will lead to improved management of disease, improved health outcomes and patient satisfaction, better informed decision-making, increased compliance with healthcare decisions, and better resource utilization. This article investigates the domains captured by the Effective Consumer Scale (EC-17) in relation to vulnerable population groups that experience health inequity. Particular focus is paid to the domain of health literacy as an area fundamental to patients’ involvement in managing their condition and negotiating the healthcare system. In examining the possible influence of Outcome Measures in Rheumatology Clinical Trials (OMERACT) on health equity, we used the recent translation and validation of the EC-17 scale into Spanish and tested Argentina as an example. Future plans to use the EC-17 with vulnerable groups include formal collaboration and needs assessment with the community to tailor an intervention to meet its needs in a culturally relevant manner. Some systematic reviews have questioned whether interventions to improve effective consumer skills are appropriate in vulnerable populations. We propose that these populations may have the most to gain from such interventions since they might be expected to have relatively lower skills and health literacy than other groups.

Software developer policies : economics and s 46 of the Competition and Consumer Act 2010

This article considers the impact of developer policies that hinder or restrict cross platform application development. We suggest that policies that hinder or restrict cross platform development have the potential to erode competition within the market for smartphones. The article also considers the relevance of dominance measures in software markets, arguing that conventional economic approaches may not be applicable. Furthermore, while most monitoring activities tend to focus primarily on protection of consumers, the article points out that modern electronic/information technology markets are multi-sided and there is a need for monitoring of practices designed to attract and retain the favour of developers. While the article is written in the context and application of the applicable Australian legislation, this being s 46 of the Competition and Consumer Act 2010 (Cth), our findings are equally relevant to other jurisdictions.

Effect of gold on the corrosion behavior of an electroless nickel/immersion gold surface finish

The performance of surface finishes as a function of the pH of the utilized plating solution was evaluated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests in 3.5 wt.% NaCl solution. In addition, the surface finishes were examined by x-ray diffraction (XRD), and the contact angle of the liquid/solid interface was recorded. NiP films on copper substrates with gold coatings exhibited their highest coating performance at pH 5. This was attributed to the films having the highest protective efficiency and charge transfer resistance, lowest porosity value, and highest contact angle among those examined as a result of the strongly preferred Au(111) orientation and the improved surface wettability.

Comparative study of ni effect on the corrosion behavior of low alloy steels in FGD and acid rain environments

The alloying effect of a small amount of nickel on low alloy steel for application to flue gas desulfurization(FGD) systems was studied. The structural characteristics of the rust layer were investigated by scanning electron microscopy(SEM). The electrochemical properties were examined by means of potentiostatic polarization test, potentiodynamic polarization test, and electrochemical impedance spectroscopy(EIS) in a modified green death solution of 16.9 vol.% H2SO4+0.35 vol.% HC1 at 60°C and an acid rain solution of 6.25 X 10-5 M H2S04+5.5 X 10-3 M NaCl at room temperature. It was found that as the amount of nickel increased, the corrosion rate increased in the modified green death solution, which seemed to result from micro-galvanic corrosion between NiS and alloy matrix. In acid rain solution, the corrosion rate decreased as the amount of nickel increased due to the repulsive force of NiFe204 rust against Cl-ions by electronegativity.