Blast fishing in southwest Sulawesi, Indonesia

Blast fishing has been a widespread and accepted fishing technique in Indonesia for over 50 years. The largest coral reef fishery in Indonesia is around the Spermonde archipelago in southwest Sulawesi. With the expanding population and the increasing demand for fish for export, fishing has intensified and fish catches per unit effort are stable or declining. The use of bombs made with a mixture of kerosene and fertilizer is widely prevalent. In the market of the city of Ujung Pendang, an estimated 10-40% of the fish from capture fisheries are caught through blast fishing. This is destroying the hard corals. Blast fishing is seen by the fishers as being much easier and results in higher catches than with other traditional methods. They believe that the only way to limit this practice is with stricter policing and higher fines. An effective management option could be to establish national marine reserves within the archipelago, supported by other income-generating activities.

An assessment of the blast resistance of sandwich beams

An assessment of the underwater blast resistance of sandwich beams with a prismatic Y-truss core is presented, utilizing three-dimensional finite element calculations. Results show a significant performance benefit for sandwich construction when compared to a monolithic plate of the same mass when the sandwich core combines high shear strength with low compressive strength.

Micro-architectured solids: From blast resistant structures to morphing wings

Classes of lattice material are reviewed, and their fracture response is explored in the context of the core of a sandwich panel. Attention is focussed on the strength of a sandwich plate with centre-cracked core made from an elastic-brittle square lattice. Predictions are summarised for the un-notched strength of the sandwiched core and for the fracture toughness of the lattice under remote tension, remote compression or remote shear. It is assumed that the lattice fails when the local stress in the cell walls attains the tensile or compressive strength of the solid, or when local buckling occurs. The local failure mechanism that dictates the unnotched strength may be different from that dictating the fracture toughness. Fracture mechanism maps are generated in order to reveal the dominant local failure mechanism for any given cell wall material.

Entendendo e interpretando os parâmetros utilizados por BLAST.

O método BLAST para determinação de similaridades entre sequências biológicas. Score e matrizes de substituição. Determinação de matrizes de substituição BLOSUM. Determinação de matrizes de substituição PAM. Resultados da teoria Estatística de comparação local de sequências. O Algoritmo usado por BLAST. NCBI-BLAST. Exemplo de busca.

Investigation of Blast Wave Propagation: Correlating External Pressures to Brain Injury Predictors

Blast-induced Traumatic Brain Injury (bTBI) is the signature injury of the Iraq and Afghanistan wars; however, current understanding of bTBI is insufficient. In this study, novel analysis methods were developed to investigate correlations between external pressures and brain injury predictors. Experiments and simulations were performed to analyze placement of helmet-mounted pressure sensors. A 2D Finite Element model of a helmeted head cross-section was loaded with a blast wave. Pressure time-histories for nodes on the inner and outer surfaces of the helmet were cross-correlated to those inside the brain. Parallel physical experiments were carried out with a helmeted headform, pressure sensors, and pressure chamber. These analysis methods can potentially lead to better helmet designs and earlier detection and treatment of bTBI.

Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers

There are two major types of erosion testing devices that are used throughout the world for quantifying particle impact erosion against a solid surface. The first of these uses pressurised air to accelerate abrasive particles through a nozzle so that they impinge upon a target specimen. The second adopts a rotating disc to accelerate abrasive particles using the centripetal effect so that they impinge upon a series of targets arranged around the periphery of the disc. This paper reports the findings of a collaborative project that was designed to compare the performance and results obtained from a rig of each of the two types mentioned above. The sand blast type rig was provided by The Department of Powder Science Technology (POSTEC) at The Telemark Technological Research and Development Centre (TEL-TEK), Porsgrunn, Norway while the centripetal effect accelerator was provided by The Wolfson Centre for Bulk Solids Handling Technology, University of Greenwich, London, UK. The test programme included tests against a wide range of materials that are commonly used in pneumatic handling facilities. (Pneumatic handling is a means of conveying and transporting powders and granular solid materials in bulk in industrial process plant, through pipelines using a gas as the carrier medium.) Olivine sand was used as the abrasive and it was projected against the test specimens at velocities and concentrations commensurate with those seen in pneumatic conveyors. In all instances the materials used in the test programme were taken from the same batch so that scatter of experimental results due to specimen variation was minimised. The paper contains a series of recommendations for erosion testing equipment. A discussion based on the results and their applicability to the prediction of wear in pneumatic conveyors concludes the paper.

A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics

The gas-blast and centrifugal-accelerator testers are the two most commonly used erosion testers. An experimental and analytical study was made of the effect of particle characteristics (size, shape and concentration) on particle dynamics in each of these testers. Analysis showed that in the gas-blast tester both particle velocity and the dispersion angle of the particle jet were relatively sensitive to the particle characteristics. Particle characteristics, within the ranges studied, had little influence in the centrifugal accelerator tester. Consequently, during an erosion test, the range of particle velocities and dispersion angles in the gas-blast tester ismuch wider than in the centrifugal-accelerator tester. It was concluded that the centrifugal-accelerator tester gave closer control of the important erosion test parameters and therefore more consistent erosion test measurements. However, one drawback of the centrifugal-accelerator tester is the need to account for erosion effects associated with the impact of rotating particles, an inherent feature of this tester.