Rotação diferencial em estrelas do tipo solar

Stellar differential rotation is an important key to understand hydromagnetic stellar dynamos, instabilities, and transport processes in stellar interiors as well as for a better treatment of tides in close binary and star-planet systems. The space-borne high-precision photometry with MOST, CoRoT, and Kepler has provided large and homogeneous datasets. This allows, for the first time, the study of differential rotation statistically robust samples covering almost all stages of stellar evolution. In this sense, we introduce a method to measure a lower limit to the amplitude of surface differential rotation from high-precision evenly sampled photometric time series such as those obtained by space-borne telescopes. It is designed for application to main-sequence late-type stars whose optical flux modulation is dominated by starspots. An autocorrelation of the time series is used to select stars that allow an accurate determination of spot rotation periods. A simple two-spot model is applied together with a Bayesian Information Criterion to preliminarily select intervals of the time series showing evidence of differential rotation with starspots of almost constant area. Finally, the significance of the differential rotation detection and a measurement of its amplitude and uncertainty are obtained by an a posteriori Bayesian analysis based on a Monte Carlo Markov Chain (hereafter MCMC) approach. We apply our method to the Sun and eight other stars for which previous spot modelling has been performed to compare our results with previous ones. The selected stars are of spectral type F, G and K. Among the main results of this work, We find that autocorrelation is a simple method for selecting stars with a coherent rotational signal that is a prerequisite to a successful measurement of differential rotation through spot modelling. For a proper MCMC analysis, it is necessary to take into account the strong correlations among different parameters that exists in spot modelling. For the planethosting star Kepler-30, we derive a lower limit to the relative amplitude of the differential rotation. We confirm that the Sun as a star in the optical passband is not suitable for a measurement of the differential rotation owing to the rapid evolution of its photospheric active regions. In general, our method performs well in comparison with more sophisticated procedures used until now in the study of stellar differential rotation

Estudos ecogenômicos e bioprospectivos de Shewanella ssp

Bacteria trom Shewanella and Geobacter ganera are the most studied iron-reducing microorganisms particularly due to their electron transport systems and contribution to some industrial and environmental problems, including steel corrosion, bioenergy and bioremediation of petroleum-impacted sites. The present study was focused in two ways: the first is an in silico comparative ecogenomic study of Shewanella spp. with sequenced genomes, and the second is an experimental metagenomic work to detect iron-reducing Shewanella through PCR-DGGE of a metabolic gene. The in silico study resulted in positive correIation between copy number of 16S rDNA and genome size in Shewanella spp., with clusters of rrn near lhe origin of replication. This way, the genus is inferred as opportunist. There are no compact genomes and their sequences length varied, ranging from 4306142 nt in S. amazonensis SB2B to 5935403 nt in S. woodyi ATCC 51908, without correIation to temperature range characteristic of each specie. Intragenomic 16S rDNA sequences possess little divergence, but reasonable to resuIt in different phyIogenetic trees, depending on the sequence that is chosen to compare. For moIecuIar detection of iron-reducing Shewanella, it is proposed the mtrB gene as new biomarker. because it codes to a fundamental protein at Fe (III)-reduction. The specific primers were designed and evaluated in silico and resulted in a fragment of 360 pb. In the second study, these primers were tested in a genomic sample from S. oneidensis MR-1, amplifying the expected region. After this successfuI resuIt, the primer set was used as a tool to assess the iron-reducing communities of ShewaneIla genus under an environmental stress, i.e. crude oil contamination in mangrove sediment in Rio Grande do Norte State (Brazil). The primers presented high specificity and the reactions performed resulted in one single band of ampIification in the metagenomic samples. The fingerprinting obtained at DGGE reveaIed temporal variation of Shewanella spp. in analyzed samples. The resuIts presented show the detection of a biotechnological important group of microorganisms, the iron-reducing Shewanella spp. using a metabolic gane as target. It is concluded there are eight or more 16S rDNA sequences in Shewanella genus, with little divergence among them that affects the phylogeny; the pair of primers designed to ampIify mtrB sequences is a viable alternative to detect iron-reducing ShewanelIa in metagenomic approaches; such bacteria are present in the mangrove sediment anaIyzed, with temporal variations in the samples. This is the first experimental study that screened the iron-reducing Shewanella genus in a metagenomic experiment of mangrove sediments subjected to oil contamination through a key metabolic gene

Jardim do Seridó: A construção dos espaços públicos na Veneza Seridoense nas primeiras décadas do século XX

As the space and the city are objects of desires, interests, seduction, sedition, appropriations, battles, victories, defeats, require to be analyzed historically. This research investigates and discusses the construction of public spaces in Jardim do Seridó City, backwoods of Rio Rio Grande do Norte, in the first decades of twentieth century, when the municipality was chaired by Heráclio Pires Fernandes, who ruled from 1917 to 1930 and was graduated from the University of Pharmacy of Recife, where he contacted the architectural, political and artistic influences circulating in the capital of Pernambuco. In the first decades of the twentieth century, the space of Jardim earns statements and practices, against the discourse of modernity, which sought to justify the title of Veneza Seridoense . At the time, the city had undergone several transformations in its public spaces through the construction of the Butchery, the Market, the Public Roads connecting the city to other urban centers, the building of the Bridge of the Pedra Lavrada Farm, the Elementary School Antônio de Azevedo , the creation of the Music Band Euterpe Jardinense , the Literary and Recreative Guild, the pavilion, the paving, tree planting, lighting, streets naming and listing of the annual painting of households, the arrival of automobiles, mail and telegraph. The construction of these new sceneries and the arrival of equipments generated impacts in the daily life of the population and were received differentiated ways by individuals involved in the process, which shows the tension between old and new, the relationship between history and space

Correlato eletroencefalográfico do estado vibracional

O estado vibracional (EV) é descrito como uma sensação de vibração intensa por todo o corpo, em que o sujeito se mantém num estado de relaxamento psicofisiológico que pode ser gerado de forma espontânea ou autoinduzida. Pessoas que aplicam esta técnica relatam alterações do estado mental e emocional, tais como: relaxamento, disposição, limpidez de pensamento, equilíbrio emocional, melhoria do raciocínio, bemestar, entre outros. Estas são, entretanto observações subjetivas, sendo a mensuração deste fenômeno uma lacuna e um desafio para a ciência. O objetivo desta pesquisa é explorar sistematicamente o estado vibracional no âmbito da neurociência. Desta forma, medidas eletroencefalográficas (EEG) foram utilizadas para observar se a sensação subjetiva de EV é acompanhada por mudanças na atividade elétrica cerebral. Além disso, para avaliar se o EV provoca algum efeito positivo em funções cognitivas como atenção e memória, foi utilizado um teste de reconhecimento de palavras antes e depois da aplicação da técnica de EV. Foram também aplicados questionários de dados gerais socioeconômicos e de saúde, do perfil de estados de humor, de qualidade do sono, além de inventários psicológicos. O foco inicial do trabalho foi a análise estatística dos dados de EEG, ficando as outras análises para uma etapa posterior. Dois grupos de voluntários foram analisados, o primeiro formado por 14 sujeitos que praticam a técnica de EV há pelo menos 10 anos (Grupo Experiente - GEXP), e o segundo formado por 11 sujeitos que nunca haviam realizado a técnica (Grupo Controle - GCONT). O GCONT obteve instruções sobre a técnica de EV antes dos experimentos. Foram realizadas análises estatísticas dos registros eletroencefalográficos, para comparar os grupos, em quatro condições: Basal, Relaxamento, Não-EV (período em que o sujeito está engajado na tarefa, mas ainda não percebe o EV) e EV (período em que o sujeito percebe o EV). Uma vez que os sujeitos do GCONT relataram não ter conseguido atingir a condição de EV propriamente, a comparação entre grupos foi feita apenas nas três condições, Basal, Relaxamento e Não-EV. Para isso, foi usado o teste de Mann-Whitney U com um limiar estatístico de p<0,05. De forma geral, o GEXP apresentou maior potência na banda de frequência alfa 2 (9,5-11,0 Hz) em todas as condições. Durante o período Não-EV, o GEXP também apresentou uma maior potência na banda de frequência alfa 3 (11,5-13,0 Hz) na região temporal esquerda, e gama 1 (30,5-55,0 Hz) e gama 2 (65,0-80,0 Hz) em regiões central, parietal e temporal esquerda, mas menor potência na banda de frequência teta 1 (3,5 - 5,0 Hz), em regiões centro-parietais. Para a análise estatística intragrupo, entre as condições, utilizou-se o teste estatístico Wilcoxon pareado. Observaram-se diferenças significativas (p<0,005), principalmente em regiões centrais, em teta 1 (3,5-5,0 Hz), sendo maior no Relaxamento, quando comparado com as condições Basal e Não-EV, no GCONT, e com o Não-EV e EV, no GEXP. No GEXP, a potência de gama 1 (30,5-55,0 Hz) e gama 2 (65,0-80,0 Hz) foi difusamente maior durante o EV, se comparado às outras três condições. Para o GCONT, apenas a condição Basal apresentou maior potência de gama 1 (30,5-55,0 Hz) e gama 2 (65,0- 80,0 Hz), se comparado com o Relaxamento. O aumento de teta 1 no Relaxamento, principalmente no GCONT, pode estar associado a uma maior sonolência deste grupo durante esta condição. Já o aumento de alfa 2 durante o Não-EV e o EV, pode estar associado com processos de atenção e cognição (DOLPPERMAYR et al., 2002; FELL et al., 2010; KLIMESCH et al., 1999; RAY E COLE, 1985). Por outro lado, o aumento da potência de gama em sujeitos experientes na técnica de EV encontrado aqui e em trabalhos anteriores, em meditadores experientes (FELL et al., 2010; LEHMANN et al., 2001; LUTZ et al., 2004), poderia estar associado a alterações nos processos mentais e cognitivos destes praticantes, tais como atenção, memória operacional, aprendizagem e percepção consciente embora, análises adicionais devam ser realizadas para excluir a possibilidade de interferência de artefatos musculares nos dados de EEG. Estes resultados suscitam a hipótese de que no engajamento da tarefa do EV e durante o EV, os sujeitos do GEXP conseguem manter-se em um estado de alerta, porém com maior nível de relaxamento e concentração. Uma inspeção mais detalhada dos dados, além de outros experimentos com diferentes protocolos, um maior número de sujeitos e pesquisas longitudinais são necessários para que testar esta hipótese

Avaliação do comportamento termoanalítico e oxidativo do biodiesel de mamona

In this work biodiesel was gotten through the transesterification reaction using the oil of castor as source of triglycerides and using the methylic route for obtaining of esters. For the characterization of biodiesel and its mixtures with mineral diesel oil, physical chemical parameters and several analytical techniques had been used, as well as: gas chromatography (GC), nuclear magnetic resonance of proton (1H NMR), infrared spectroscopy (IR) and thermal analysis. The chromatography confirmed the complete reaction of esters in biodiesel presenting a 97,08% conversion. The 1H - NMR presented singlet in 3,6 ppm corresponding to the hydrogen of the group ester RCOO CH3. The infrared presented a strong band in 1741 cm-1 referring to stretching C=O of ester and an average band in 1175 cm-1 referring C O deformation. With the data of thermal analysis it was possible to observe the thermal and oxidative stability of the samples changing the atmospheres of synthetic air and nitrogen, where stages of the thermal decomposition had been verified and had been attributed to the volatilization and/or decomposition of the triacylglycerides. The thermal degradation of the samples was carried through 150 and 210°C during 1, 12, 24 and 48 hours and was observed change in the thermogravimetric profile, therefore an increase in the number of stages of the thermal decomposition also occurred indicating characteristic intermediate composites of polymerization, being this confirmed through the rheological study that presented brusque increase of viscosity. The kinetic study showed that the activation energy has the following order: biodiesel > mineral diesel oil > mixtures biodiesel/diesel

Desenvolvimento de um novo complexo macrocíclico do sistema cobalto cyclam

In this work were synthesized and studied the spectroscopic and electrochemical characteristics of the coordination compounds trans-[Co (cyclam)Cl2]Cl, trans- Na[Co(cyclam)(tios)2], trans-[Co(en)2Cl2]Cl and trans-Na[Co(en)2(tios)2], where tios = thiosulfate and en = ethylenediamine. The compounds were characterized by: Elemental Analysis (CHN), Absorption Spectroscopy in the Infrared (IR), Uv-Visible Absorption Spectroscopy, Luminescence Spectroscopy and Electrochemistry (cyclic voltammetry). Elemental Analysis (CHN) suggests the following structures for the complex: trans- [Co(cyclam)Cl2]Cl.6H2O and trans-Na[Co(cyclam)(tios)2].7H2O. The electrochemical analysis, when compared the cathodic potential (Ec) processes of the complexes trans- [Co(cyclam)Cl2]Cl and trans-[Co(en)2Cl2]Cl, indicated a more negative value (-655 mV) for the second complex, suggesting a greater electron donation to the metal center in this complex which can be attributed to a greater proximity of the nitrogen atoms of ethylenediamine in relation to metal-nitrogen cyclam. Due to the effect of setting macrocyclic ring to the metal center, the metal-nitrogen bound in the cyclam are not as close as the ethylenediamine, this fact became these two ligands different. Similar behavior is also observed for complexes in which the chlorides are replaced by thiosulfate ligand, trans-Na[Co(en)2(tios)2] (-640 mV) and trans-Na[Co(cyclam)(tios)2] (-376 mV). In absorption spectroscopy in the UV-visible, there is the band of charge transfer LMCT (ligand p d* the metal) in the trans-Na[Co(cyclam)(tios)2] (350 nm, p tios  d* Co3+) and in the trans-Na[Co(en)2(tios)2] (333 nm, p tios d* Co3+), that present higher wavelength compared to complex precursor trans- [Co(cyclam)Cl2]Cl (318 nm, pCl  d* Co3+), indicating a facility of electron density transfer for the metal in the complex with the thiosulfate ligand. The infrared analysis showed the coordination of the thiosulfate ligand to the metal by bands in the region (620-635 cm-1), features that prove the monodentate coordination via the sulfur atom. The νN-H bands of the complexes with ethylenediamine are (3283 and 3267 cm-1) and the complex with cyclam bands are (3213 and 3133 cm-1). The luminescence spectrum of the trans-Na[Co(cyclam)(tios)2] present charge transfer band at 397 nm and bands dd at 438, 450, 467, 481 and 492 nm.

Estudo de titanatos nanoestruturados obtidos por tratamento hidrotérmico de óxido de titânio em meio alcalino

TiTanate NanoTubes (TTNT) were synthesized by hydrothermal alkali treatment of TiO2 anatase followed by repeated washings with distinct degrees of proton exchange. TTNT samples with different sodium contents were characterized, as synthesized and after heattreatment (200-800ºC), by X-ray diffraction, scanning and transmission electron microscopy, electron diffraction, thermal analysis, nitrogen adsorption and spectroscopic techniques like FTIR and UV-Vis diffuse reflectance. It was demonstrated that TTNTs consist of trititanate structure with general formula NaxH2−xTi3O7·nH2O, retaining interlayer water in its multiwalled structure. The removal of sodium reduces the amount of water and contracts the interlayer space leading, combined with other factors, to increased specific surface area and mesopore volume. TTNTs are mesoporous materials with two main contributions: pores smaller than 10 nm due to the inner volume of nanotubes and larger pores within 5-60 nm attributed to the interparticles space. Chemical composition and crystal structure of TTNTs do not depend on the average crystal size of the precursor TiO2-anatase, but this parameter affects significantly the morphology and textural properties of the nanostructured product. Such dependence has been rationalized using a dissolution-recrystallization mechanism, which takes into account the dissolution rate of the starting anatase and its influence on the relative rates of growth and curving of intermediate nanosheets. The thermal stability of TTNT is defined by the sodium content and in a lower extent by the crystallinity of the starting anatase. It has been demonstrated that after losing interlayer water within the range 100-200ºC, TTNT transforms, at least partially, into an intermediate hexatitanate NaxH2−xTi6O13 still retaining the nanotubular morphology. Further thermal transformation of the nanostructured tri- and hexatitanates occurs at higher or lower temperature and follows different routes depending on the sodium content in the structure. At high sodium load (water washed samples) they sinter and grow towards bigger crystals of Na2Ti3O7 and Na2Ti6O13 in the form of rods and ribbons. In contrast, protonated TTNTs evolve to nanotubes of TiO2(B), which easily convert to anatase nanorods above 400ºC. Besides hydroxyls and Lewis acidity typical of titanium oxides, TTNTs show a small contribution of protonic acidity capable of coordinating with pyridine at 150ºC, which is lost after calcination and conversion into anatase. The isoeletric point of TTNTs was measured within the range 2.5-4.0, indicating behavior of a weak acid. Despite displaying semiconductor characteristics exhibiting typical absorption in the UV-Vis spectrum with estimated bandgap energy slightly higher than that of its TiO2 precursor, TTNTs showed very low performance in the photocatalytic degradation of cationic and anionic dyes. It was concluded that the basic reason resides in its layered titanate structure, which in comparison with the TiO2 form would be more prone to the so undesired electron-hole pair recombination, thus inhibiting the photooxidation reactions. After calcination of the protonated TTNT into anatase nanorods, the photocatalytic activity improved but not to the same level as that exhibited by its precursor anatase

Síntese e Caracterização de Titanatos de Cobalto e Níquel, dopados com Praseodímio, obtidos a partir da decomposição de Nitrilotriacetatos

In recent years, studies about the physicochemical properties of mixed oxides, call attention of the scientific community, properties like as piezoelectricity, photoluminescence, or applications as catalysts, arise in these compounds, when their chemical compositions are modified, in this context some routes are employed in the synthesis of these materials, among which can be cited these methods: ceramic, combustion, co-precipitation, Pechini or polymeric precursor method, hydrothermal, sol-gel; these routes are divided into traditional routes or chemical routes. In this work were synthesized oxides with variable composition, from the thermal decomposition of titanium, cobalt, nickel and praseodymium nitrilotriacetates. The nitrilotriacetates were characterized by IR Spectroscopy (FTIR), Thermogravimetric (TG/ DTG) and Differential Scanning Calorimetry (DSC), while oxides have been characterized by X-ray diffraction (XRD), Spectrofluorimetry and IR Spectroscopy (FTIR). From FTIR data, it was demonstrated that the displacement of the band corresponding to the carboxylate group (νCOOH) at 1712 cm-1, present in nitrilotriacetic acid (H3NTA), for 1680-1545 cm-1, these stretches are characteristics of coordinated nitrilotriacetates, By thermal analysis (TG/DTG /DSC), it was suggested, that in an oxidizing atmosphere (air) oxides are obtained at lower temperatures than in an inert atmosphere N2(g). By results from X-ray Diffraction (XRD), it was determinated that the oxides are crystalline and the predominant phases obtained are summarized titanate phases rutile and ilmenite. By fluorimetry was observed that the intensity of emission bands are directly proportional to the concentration of ions Ni2+, Co2+ and Pr3+, and IR spectroscopy (FTIR) from oxides, demonstrated the disappearance of characteristic bands by nitrilotriacetates, determining the complete decomposition of the nitrilotriacetates in oxides

Obtenção e caracterização físico-química de blendas poliméricas, baseadas em POE e PMMA, dopadas com dióxido de titânio

The study of polymer blends has been an alternative method in the search field of new materials for obtaining materials with improved properties. In this work blends of poly(methyl methacrylate) (PMMA) and poly(ethylene oxide) (PEO) doped with titanium dioxide (TiO2) were studied. The PEO is a polymer semicrystalline structure varying between, 70 and 84% crystallinity, while the PMMA exhibits behavior amorphous in their structure. The use of TiO2 is related to corrosion-resistant of titanium as well as good heat transfer and other characteristics. The study of these polymer blends doped TiO2 gives the properties junction organic (polymer) and inorganic (oxide) which leads to modification of the properties of the resultant material. The blends were doped TiO2 (POE/PMMA/TiO2) in different proportions of the PMMA with the PEO and TiO2 fixed. The ratios were: 90/10/0,1; 85/15/0, 1; 80/20/0,1, 75/25/0,1 and 70/30/0,1. The resulting material was obtained in powder form and being characterized by Fourier Transformed Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and Electrochemical Impedance Spectroscopy (EIS). The infrared spectra (IR) for the blends in different ratios showed a band at 1744 cm-1, characteristic of the C=O stretching, which increases in intensity with increasing PMMA composition, while in the spectrum of pure PEO this band is absent. This may suggest that the interaction is occurring between the polymers. In the micrographs of the blends also observed change in their surfaces with variation of the composition of PMMA, contributing to the change of the electrical properties of the material. The EIS data showed that the material exhibited conductivity of the order of 10-6 S.cm-1. The blend in the ratio B2(85/15/0, 1) showed better conductivity, σ = 1.56 x 10-6 S.cm-1. It was observed that the diffusion coefficient for the blends, B5(70/30/0, 1) was the largest, 1.07 x 10-6 m2.s-1. The XRD data showing that, with the variation in the composition of the PMMA blend crystallinity of the material is decreased reaching a minimum B3(80/20/0,1), and then increases again. Thermal analysis suggests that blends made from the material obtained can be applied at room temperature

Caracterização e aplicação de vermicultura natural e quimicamente modificada na adsorção de azul de metileno

Chemical modification of clays has been extremely studied in the search for improvements of their properties for use in various areas, such as in combating pollution by industrial effluents and dyes. In this work, the vermiculite was chemically modified in two ways, characterized and evaluated the adsorption of methylene blue dye. First was changed with the addition of a surfactant (hexadecyltrimethylammonium bromide, BHTA) making it an organophilic clay and then by adding an acid (HCl) by acid activation. Some analyzes were performed as X-ray fluorescence (FRX), X-ray diffraction (DRX), adsorption isotherms of methylene blue dye, infrared (FTIR) , scanning electron microscopy (SEM), thermal gravimetric analysis and spectroscopy energy dispersive (EDS). Analysis by FRX of natural vermiculite indicates that addition of silicon and aluminum, clay presents in its structure the magnesium, calcium and potassium with 16 % organic matter cations. The DRX analyzes indicated that the organic vermiculite was an insertion of the surfactant in the space between the lamellae, vermiculite and acid partial destruction of the structure with loss of crystallinity. The adsorption isotherms of methylene blue showed that there was a significant improvement in the removal of dye to the vermiculite with the addition of cationic surfactant hexadecyltrimethylammonium bromide and treatment with acid using HCl 2 mol/L. In acid vermiculites subsequently treated with surfactant, the adsorption capacity increased with respect to natural vermiculite, however was much lower compared vermiculite modified with acid and surfactant separately. Only the acidic vermiculite treated with surfactant adjusted to the Langmuir model. As in the infrared spectrometry proved the characteristics of natural vermiculite. In the organic vermiculite was observed the appearance of characteristic bands of CH3, CH2, and (CH3)4N. Already on acid vermiculite, it was realized a partial destruction with decreasing intensity of the characteristic band of vermiculite that is between 1074 and 952 cm-1. In the SEM analysis, it was observed that there was partial destruction to the acid treatment and a cluster is noted between the blades caused by the presence of the surfactant. The TG shows that the higher mass loss occurs at the beginning of the heating caused by the elimination of water absorbed on the surface between layers. In the organic vermiculite also observed a loss of mass between 150 and 300 °C caused decomposition of the alkylammonium molecules (surfactants)

Mulher não vale nem um real : patriarcado nas letras das músicas de forró

Patriarchy is a dominating system that establishes male power in social relations as the social-ideological system and the structuring element of several ways of men‟s domination on gender social relations, on organization of social life, on private relations, and on political decision spaces. In this study we enlarge our reflection about patriarchy from the analysis of Forró lyrics, more specifically the variation known as stylized. Of late decades, it is a kind of music that has been receiving a large acceptance all over the national territory, making use of everyday expressions that propagate and make apology to many forms of discrimination, oppression and violence against women. We emphasize that over this study 14 Forró lyrics were analyzed of different styles besides stylized, like the traditional and the double meaning ones. However, we dwelled on the content analysis, particularly in three Stylized Forró lyrics, they are: Tapa na Cara (2008) by Saia Rodada Band; Mulher Roleira (2004), Aviões do Forró Band; and Bomba no Cabaré (2007), Matruz com Leite Band. In order to make a critical analysis of the elements in the lyrics content, we support ourselves on the theoretic-methodological references of the dialectical materialism, a method that allowed us to get closer to the totality of the reality that includes the popular involvement of the analyzed lyrics in a qualitative way. In that sense, we hold onto the theoretic-methodological categories: gender social relations, patriarchy, violence against women, ideology and cultural industry. As from the lyrics compilation, they were arranged by theme, we classified and analyzed the content, which allowed us to comprehend the messages in the lyrics, beyond the text shows at first sight. Today, there are many mechanisms of propagation and perpetuation of patriarchal ideology. A very relevant mechanism of this phenomenon is the sexual violence. The violence against women is a form to propagate and keep sexism, which may occur in different ways, like physical, psychological, sexual, patrimonial and social. Through our study we established that the propagation of the violence against women as being something natural and banal, giving reinforcement to the asymmetric construction of gender relations that priorizes male to the detriment of female. This banalization is perhaps, one of the strongest allies of this phenomenon‟s perpetuation, that affects women all over the world from different social classes

MoSAC: um módulo para seleção de configurações arquiteturais baseado em critérios de QoS no contexto de sistema distribuídos autoadaptativos

The process for choosing the best components to build systems has become increasingly complex. It becomes more critical if it was need to consider many combinations of components in the context of an architectural configuration. These circumstances occur, mainly, when we have to deal with systems involving critical requirements, such as the timing constraints in distributed multimedia systems, the network bandwidth in mobile applications or even the reliability in real-time systems. This work proposes a process of dynamic selection of architectural configurations based on non-functional requirements criteria of the system, which can be used during a dynamic adaptation. This proposal uses the MAUT theory (Multi-Attribute Utility Theory) for decision making from a finite set of possibilities, which involve multiple criteria to be analyzed. Additionally, it was proposed a metamodel which can be used to describe the application s requirements in terms of the non-functional requirements criteria and their expected values, to express them in order to make the selection of the desired configuration. As a proof of concept, it was implemented a module that performs the dynamic choice of configurations, the MoSAC. This module was implemented using a component-based development approach (CBD), performing a selection of architectural configurations based on the proposed selection process involving multiple criteria. This work also presents a case study where an application was developed in the context of Digital TV to evaluate the time spent on the module to return a valid configuration to be used in a middleware with autoadaptative features, the middleware AdaptTV

Condicionamento estrutural das zonasa de cisalhamento da região de Forquilha, domínio Ceará Central: uma abordagem integrada de sensoriamento remoto e geologia estrutural

The studied region, named Forquilha and localized in northwestern Central Ceará domain (northern portion of Borborema Province), presents a lithostratigraphic framework constituted by paleoproterozoic metaplutonics, metasedimentary sequences and neoproterozoic granitoids. The metasedimentary rocks of Ceará group occupy most part of the area. This group is subdivided in two distinct units: Canindé and Independência. Canindé unit is represented basically by biotite paragneisses and muscovite paragneisses, with minor metabasic rocks (amphibolite lens). Independência sequence is composed by garnetiferous paragneisses, sillimanite-garnet-quartz-muscovite schists and quartz-muscovite schists, pure or muscovite quartzites and rare marbles. At least three ductile deformation events were recognized in both units of Ceará group, named D1, D2 and D3. The former one is interpreted as related to a low angle tangential tectonics which mass transport is southward. D2 event is marked by the development of close/isoclinal folds with a N-S oriented axis. Refolding patterns generated by F1 and F2 superposition are found in several places. The latest event (D3) corresponds to a transcurrent tectonics, which led to development of mega-folds and several shear zones, under a transpressional regime. The mapped shear zones are Humberto Monte (ZCHM), Poço Cercado (ZCPC) and Forquilha (ZCF). Digital image processing of enhanced Landsat 7-ETM+ satellite images, combined with field data, demonstrate that these penetrative structures are associated with positive and negative geomorphologic patterns, distributed in linear and curvilinear arrangements with tonal banding, corresponding to the ductile fabric and to crests. Diverse color composites were tested and RGB-531 and RGB-752 provided the best results for lineament analysis of the most prominent shear zones. Spatial filtering techniques (3x3 and 5x5 filters) were also used and the application of Prewitt filters generated the best products. The integrated analysis of morphological and textural aspects from filtered images, variation of tonalities related to the distribution of geologic units in color composites and the superposition over a digital elevation model, contributed to a characterization of the structural framework of the study area. Kinematic compatibility of ZCHM, ZCPC, ZCF shear zones, as well as Sobral-Pedro II (ZCSPII) shear zone, situated to the west of the study area, was one of the goal of this work. Two of these shear zones (ZCHM, ZCPC) display sinistral movements, while the others (ZCSPII, ZCF) exhibit dextral kinematics. 40Ar/39Ar ages obtained in this thesis for ZCSPII and ZCPC, associated with other 40Ar/39Ar data of adjacent areas, indicate that all these shear zones are related to Brasiliano orogeny. The trend of the structures, the opposite shear senses and the similar metamorphic conditions are fitted in a model based on the development of conjugate shear zones in an unconfined transpression area. A WNW-ESE bulk shortening direction is infered. The geometry and kinematic of the studied structures suggest that shortening was largely accommodated by lateral extrusion, with only minor amounts of vertical stretch

Algoritmos e Arquiteturas VLSI para Detectores MIMO com Decisão Suave

The use of Multiple Input Multiple Output (MIMO) systems has permitted the recent evolution of wireless communication standards. The Spatial Multiplexing MIMO technique, in particular, provides a linear gain at the transmission capacity with the minimum between the numbers of transmit and receive antennas. To obtain a near capacity performance in SM-MIMO systems a soft decision Maximum A Posteriori Probability MIMO detector is necessary. However, such detector is too complex for practical solutions. Hence, the goal of a MIMO detector algorithm aimed for implementation is to get a good approximation of the ideal detector while keeping an acceptable complexity. Moreover, the algorithm needs to be mapped to a VLSI architecture with small area and high data rate. Since Spatial Multiplexing is a recent technique, it is argued that there is still much room for development of related algorithms and architectures. Therefore, this thesis focused on the study of sub optimum algorithms and VLSI architectures for broadband MIMO detector with soft decision. As a result, novel algorithms have been developed starting from proposals of optimizations for already established algorithms. Based on these results, new MIMO detector architectures with configurable modulation and competitive area, performance and data rate parameters are here proposed. The developed algorithms have been extensively simulated and the architectures were synthesized so that the results can serve as a reference for other works in the area

Propriedades estruturais e optoeletrônicas dos compostos SrSnO3, SrxBa1-xSnO3 e BaSnO3

In this work we present a study for the structural, electronic and optical properties, at ambient conditions of SrSnO3, SrxBa1