Comparison of high-speed videokeratoscopy and ultrasound distance sensing for measuring the longitudinal corneal apex movements

Two different methods to measure binocular longitudinal corneal apex movements were synchronously applied. High-speed videokeratoscopy at a sampling frequency of 15 Hz and a customdesigned ultrasound distance sensor at 100 Hz were used for the left and the right eye, respectively. Four healthy subjects participated in the study. Simultaneously, cardiac electric cycle (ECG) was registered for each subject at 100 Hz. Each measurement took 20 s. Subjects were asked to suppress blinking during the measurements. A rigid headrest and a bite-bar were used to minimize undesirable head movements. Time, frequency and time-frequency representations of the acquired signals were obtained to establish their temporal and spectral contents. Coherence analysis was used to estimate the correlation between the measured signals. The results showed close correlation between both corneal apex movements and the cardiopulmonary system. Unraveling these relationships could lead to better understanding of interactions between ocular biomechanics and vision. The advantages and disadvantages of the two methods in the context of measuring longitudinal movements of the corneal apex are outlined.

The effect of intraoperative force on scoliosis correction at the apex : a biomechanical investigation

Adolescent idiopathic scoliosis (AIS) is a complex 3D deformity of the spine, which may require surgical correction in severe cases. Computer models of the spine provide a potentially powerful tool to virtually ‘test’ various surgical scenarios prior to surgery. Using patient-specific computer models of seven AIS patients who had undergone a single rod anterior procedure, we have recently found that the majority of the deformity correction occurs at the apical joint or the joint immediately cephalic to the apex. In the current paper, we investigate the biomechanics of the apical joint for these patients using clinically measured intra-operative compressive forces applied during implant placement. The aim of this study is to determine a relationship between the compressive joint force applied intra-operatively and the achievable deformity correction at the apical joint.

Three-dimensional corner reflector of arbitrary apex angle

A method of analysing a 3-dimensional corner reflector antenna of arbitrary apex angle is given. Expressions have been obtained for the far field of the 3-dimensional corner reflector fed by a dipole. The radiation resistance and the directive gain of the antenna have been calculated. The method described is applicable even when the feed dipole is arbitrarily oriented. It is found that the radiation along a prescribed direction can be circularly polarised (right or left) by suitably orienting the feed dipole.

Three-dimensional corner reflector of arbitrary apex angle

A method of analysing a 3-dimensional corner reflector antenna of arbitrary apex angle is given. Expressions have been obtained for the far field of the 3-dimensional corner reflector fed by a dipole. The radiation resistance and the directive gain of the antenna have been calculated. The method described is applicable even when the feed dipole is arbitrarily oriented. It is found that the radiation along a prescribed direction can be circularly polarised (right or left) by suitably orienting the feed dipole.

Time to rest : Signals in shoot apex developmental transitions underlying dormancy

Vuodenajat rytmittävät monivuotisten kasvien elämää pohjoisella pallonpuoliskolla, jolla varmin merkki lähestyvästä talvikaudesta on asteittain lyhenevä päivänpituus. Kun päivänpituus on lyhentynyt tiettyyn raja-arvoon saakka, kasvu hiipuu ja kasvin kehityksessä tapahtuu suuria muutoksia. Väitöskirjatyössäni tutkittiin mekanismeja, jotka liittyvät pituuskasvun päättymiseen, silmujen lepotilan kehittymiseen ja kärkisilmun muodostumiseen hybridihaavan ja koivuntaimilla lyhyen päivänpituuden seurauksena kasvihuoneolosuhteissa. Vain lepotilaiset silmut selviytyvät luonnossa ankaran talvikauden yli, joten etenkin lepotilan kehittymisen tutkiminen on keskeistä pyrittäessä selvittämään monivuotisille kasveille tyypillisen kasvutavan mekanismeja. Jo pitkään on tiedetty, että täysikasvuiset lehdet vastaanottavat tiedon päivänpituudesta ja lähettävät signaaleja varren johtojänteissä ylöspäin kohti kasvin kärkiosaa. Sen sijaan varren kärjen ja kärkikasvupisteen roolia lepotilan kehittymisessä on selvitetty vain vähän. Kuitenkin juuri kärkikasvupisteen selviytyminen vuodesta toiseen on tärkeää, koska sen jakautumiskykyiset solukot tuottavat kasvin maanpäälliset osat. Tässä työssä tehdyissä varttamiskokeissa osoitettiin, että varren kärki ei ainoastaan vastaanota signaaleja lehdistä ja ajoita toimintaansa niiden mukaan, vaan myös kärjellä itsellään on aktiivinen rooli lepotilan kehittymisessä. Erityisesti kiinnitettiin huomiota kärkikasvupisteen eri alueiden, ns. apikaalimeristeemin ja rib-meristeemin erilaisiin tehtäviin ja pääteltiin, että molemmat vaikuttavat lepotilan kehittymiseen. Kokeissa käytettiin normaalien hybridihaapojen lisäksi siirtogeenisiä hybridihaapoja, jotka eivät lopeta kasvuaan lyhyt päivä –olosuhteissa. Siirtogeeniset hybridihaavat ilmensivät voimakkaasti fytokromi A -nimistä valon vastaanottajamolekyyliä rib-meristeemin alueella, mikä saattoi osaltaan vaikuttaa poikkeavaan pituuskasvukäyttäytymiseen. Myös useiden lepotilan kehittymiseen liittyvien geenien ilmenemisessä havaittiin poikkeavuuksia verrattuna ei-siirtogeenisiin kontrolleihin, joiden silmuissa kehittyi lepotila lyhyt päivä –altistuksen seurauksena. Väitöskirjatyössäni havaittiin, että myös kaasumainen kasvihormoni etyleeni toimii viestinvälittäjänä silmujen lepotilan kehittymisessä ja vaikuttaa etenkin lepotilan oikeaan ajoittumiseen. Etyleenillä huomattiin olevan määräävä rooli päätesilmun muodostumisessa: siirtogeeniset koivut, jotka eivät aisti etyleeniä, eivät muodostaneet päätesilmua. Silti siirtogeeniset koivut vaipuivat lepotilaan, joskin myöhemmin kuin ei-siirtogeeniset kontrollit. Tämän perusteella todettiin, että lepotilan ja päätesilmun kehittyminen ovat erillisiä kehitystapahtumia, vaikka ne saattavatkin ajoittua osaksi päällekkäin.

Effect of gas injection on drag and surface heat transfer rates for a 30 degrees semi-apex angle blunt body flying at Mach 5.75

Effect of coolant gas injection in the stagnation region on the surface heat transfer rates and aerodynamic drag for a large angle blunt body flying at hypersonic Mach number is reported for two stagnation enthalpies. A 60° apex-angle blunt cone model is employed for this purpose with air injection at the nose through a hole of 2mm diameter. The convective surface heating rates and aerodynamic drag are measured simultaneously using surface mounted platinum thin film sensors and internally mounted accelerometer balance system, respectively. About 35–40% reduction in surface heating rates is observed in the vicinity of stagnation region whereas 15–25% reduction in surface heating rates is felt beyond the stagnation region at stagnation enthalpy of 1.6MJ/kg. The aerodynamic drag expressed in terms of drag coefficient is found to increase by 20% due to the air injection.

Increases in the relative abundance of mid-trophic level fishes concurrent with declines in apex predators in the subtropical North Pacific, 1996–2006

Catch rates for the 13 most abundant species caught in the deep-set Hawaii-based longline fishery over the past decade (1996–2006) provide evidence of a change among the top North Pacific subtropical predators. Catch rates for apex predators such as blue shark (Prionace glauca), bigeye (Thunnus obesus) and albacore (Thunnus alalunga) tunas, shortbill spearfish (Tetrapturus angustirostris), and striped marlin (Tetrapturus audax) declined by 3% to 9% per year and catch rates for four midtrophic species, mahimahi (Coryphaena hippurus), sickle pomfret (Taractichthys steindachneri), escolar (Lepidocybium flavobrunneum), and snake mackerel (Gempylus serpens), increased by 6% to 18% per year. The mean trophic level of the catch for these 13 species declined 5%, from 3.85 to 3.66. A shift in the ecosystem to an increase in midtrophic-level, fast-growing and short-lived species is indicated by the decline in apex predators in the catch (from 70% to 40%) and the increase in species with production to biomass values of 1.0 or larger in the catch (from 20% to 40%). This altered ecosystem may exhibit more temporal variation in response to climate variability.

Long-term hydroclimatic change and interannual variability in water sources, Apex River (Iqaluit), Baffin Island, Nunavut

The eastern Canadian Arctic is home to Canada’s largest Indigenous population, which depends on local freshwater sources for drinking water. However, small watersheds have rarely been analyzed for long-term hydrologic response to changing climate. This study aims to address this issue by examining the Apex River, a small watershed with a long hydroclimatic record, near Iqaluit, Nunavut. Particular emphasis was placed on the long-term changes in climate and river discharge, and the seasonal variability of water sources between two snapshots in time, 1983 and 2013. Long-term hydrological data were obtained from gauge station 10UH002, operated by Environment and Climate Change Canada, and long-term meteorological data were acquired from Environment Canada–operated stations near Iqaluit Airport. Breakpoint analysis suggested that long-term mean annual surface air temperatures have increased since 1994. In contrast, no long-term total precipitation or annual discharge changes were observed. However, river flow initiation and cessation analyses of the Apex River flow season indicates that flow extended into the autumn since the 2000s. The 2013 flow season lasted 44 days longer than the 1983 flow season. Systematic river sampling was undertaken throughout the 2013 thaw season to determine contributing proportions of event (snowmelt or rainfall) and pre-event (baseflow) water to river runoff. Results from the stable isotope hydrograph separation for 2013 were compared to findings for 1983. Snow was the main source of water to the river during the snowmelt period in 1983 and 2013, however baseflow was still an important contributor. Although there was high similarity of water sources early in the season in 1983 and 2013, the two years differed during the autumn. In 2013 there was a high rainfall runoff response that was not present in 1983, suggesting high release of late-season sub-surface water storage and an increased sensitivity to late-season rainfall events in 2013. This research provides insights into the hydrologic response of the Apex River to long-term climatic change, and highlights the need for high-quality precipitation and discharge data for effective long-term hydrological assessment.

Root elongation rate is correlated with the length of the bare root apex of maize and lupin roots despite contrasting responses of root growth to compact and dry soils

Background We investigated interacting effects of matric potential and soil strength on root elongation of maize and lupin, and relations between root elongation rates and the length of bare (hairless) root apex. Methods Root elongation rates and the length of bare root apexwere determined formaize and lupin seedlings in sandy loam soil of various matric potentials (−0.01 to −1.6 MPa) and bulk densities (0.9 to 1.5 Mg m−3). Results Root elongation rates slowed with both decreasing matric potential and increasing penetrometer resistance. Root elongation of maize slowed to 10 % of the unimpeded rate when penetrometer resistance increased to 2 MPa, whereas lupin elongated at about 40 % of the unimpeded rate. Maize root elongation rate was more sensitive to changes in matric potential in loosely packed soil (penetrometer resistances <1 MPa) than lupin. Despite these differing responses, root elongation rate of both species was linearly correlated with length of the bare root apex (r2 0.69 to 0.97). Conclusion Maize root elongation was more sensitive to changes in matric potential and mechanical impedance than lupin. Robust linear relationships between elongation rate and length of bare apex suggest good potential for estimating root elongation rates for excavated roots.

Ex Vivo Accuracy of an Apex Locator Using Digital Signal Processing in Primary Teeth

The purpose of this study was to evaluate ex vivo the accuracy an electronic apex locator during root canal length determination in primary molars. Methods: One calibrated examiner determined the root canal length in 15 primary molars (total=34 root canals) with different stages of root resorption. Root canal length was measured both visually, with the placement of a K-file 1 mm short of the apical foramen or the apical resorption bevel, and electronically using an electronic apex locator (Digital Signal Processing). Data were analyzed statistically using the intraclass correlation (ICC) test. Results: Comparing the actual and electronic root canal length measurements in the primary teeth showed a high correlation (ICC=0.95) Conclusions: The Digital Signal Processing apex locator is useful and accurate for apex foramen location during root canal length measurement in primary molars. (Pediatr Dent 200937:320-2) Received April 75, 2008 vertical bar Lost Revision August 21, 2008 vertical bar Revision Accepted August 22, 2008

Ex vivo evaluation of the accuracy of two electronic apex locators during root canal length determination in primary teeth

Aim To evaluate ex vivo the accuracy of two electronic apex locators during root canal length determination in primary incisor and molar teeth with different stages of physiological root resorption. Methodology One calibrated examiner determined the root canal length in 17 primary incisors and 16 primary molars (total of 57 root canals) with different stages of root resorption based on the actual canal length and using two electronic apex locators. Root canal length was measured both visually, with the placement of a K-file 1 mm short of the apical foramen or the apical resorption bevel, and electronically using two electronic apex locators (Root ZX II - J. Morita Corp. and Mini Apex Locator - SybronEndo) according to the manufacturers` instructions. Data were analysed statistically using the intraclass correlation (ICC) test. Results Comparison of the actual root canal length and the electronic root canal length measurements revealed high correlation (ICC = 0.99), regardless of the tooth type (single-rooted and multi-rooted teeth) or the presence/absence of physiological root resorption. Conclusions Root ZX II and Mini Apex Locator proved useful and accurate for apex foramen location during root canal length measurement in primary incisors and molars.

Accuracy of the iPex multi-frequency electronic apex locator in primary molars: an ex vivo study

P>Aim To evaluate ex vivo the accuracy of the iPex multi-frequency electronic apex locator (NSK Ltd, Tokyo, Japan) for working length determination in primary molar teeth. Methodology One calibrated examiner determined the working length in 20 primary molar teeth (total of 33 root canals). Working length was measured both visually, with the placement of a K-file 1 mm short of the apical foramen or the most coronal limit of root resorption, and electronically using the electronic apex locator iPex, according to the manufacturers` instructions. Data were analysed statistically using the intraclass correlation (ICC) test. Results Comparison of the actual and the electronic measurements revealed high correlation (ICC = 0.99) between the methods, regardless of the presence or absence of physiological root resorption. Conclusions In this laboratory study, the iPex accurately identified the apical foramen or the apical opening location for working length measurement in primary molar teeth.