Intervención dietético-terapéutica en candidiasis intestinal

Antecedentes: Las candidiasis son infecciones oportunistas producidas por levaduras, cuyo agente etiológico implicado más frecuente C.albicans generando problemas a varios niveles. Caso clínico: Mujer de 39 años diagnosticada de Candidiasis intestinal crónica cursando con sintomatología amplia y variada. Tras la valoración se procede a complementar el tratamiento con una alimentación centrada en la eliminación de azúcares simples, levaduras y productos fermentados. Además, se incluyen ácido caprílico, aceite de orégano y L.acidophylus. Conclusiones: Existe un aumento de la actividad inmunológica acompañada de la mejora sintomatológica.

Evaluación estacional de la producción y calidad del aceite esencial en plantas de orégano (Poliomintha longiflora Gray) en dos sistemas de cultivo.

Tesis (Maestría en Ciencias en Producción Agrícola) UANL, 2014.

Determinación del efecto inhibitorio del aceite esencial y diferentes extractos de orégano (lippia berlandieri Schauer) sobre el crecimiento de fusarium oxysporum de tanto in vitro como en plántula de tomate.

Tesis (Doctor en Ciencias Biológicas con Acentuación en Alimentos) UANL, 2010.

Aceite esencial de orégano : un potencial aditivo alimentario

Se trabajó con aceite esencial obtenido por arrastre por vapor de Origanum x applii (criollo) y Origanum x majoricum (mendocino), cultivados en La Consulta, Mendoza, Argentina. Para evaluar su poder antioxidante y conservante en alimentos se determinó: rendimiento, polifenoles totales, cuantificación de timol y carvacrol mediante cromatografía en capa fina de alta resolución (HPTLC) y capacidad de secuestro de radicales libres (DPPH). La actividad conservante se evaluó in vitro, por el método de difusión en agar, frente a cultivos puros de cinco bacterias patógenas y seis cepas de bacterias lácticas que alteran alimentos. El rendimiento en aceite esencial de estos oréganos oscila entre los valores informados por distintos autores para variedades cultivadas en otras regiones. Se destaca el contenido de polifenoles de ambos en relación con los valores mencionados en la bibliografía para otros Origanum, prevaleciendo el timol sobre el carvacrol. Esto se condice con un superior nivel de secuestro de radicales libres de ambos respecto de los citados en la literatura. Los oréganos de La Consulta inhibieron todas las cepas ensayadas y fueron más efectivos contra Staphylococcus aureus. Lo expuesto corrobora el poder antioxidante y conservante del Origanum x applii y del Origanum x majoricum.

Evaluación de la eficacia antibacteriana in vitro de un colutorio de aceite esencial de Origanum vulgare L. (Oregano) sobre Sterptococcos mutans

con el objetivo de evaluar la eficacia antibacteriana in vitro de dos formulaciones de un colutorio de aceite esencial de orégano sobre Streptococcus mutans (S. mutans) el principal agente causal de la placa bacteriana dental, para determinar dicha actividad, primero se realizó la determinación de la concentración inhibitoria mínima (CIM) del aceite esencial de orégano (AEO) sobre S. mutans mediante el método de microdilución en caldo y se obtuvo una CIM de 0.0025 %, esa concentración o una mayor podría ser útil en una forma farmacéutica con propósito antibacteriano. se realizó la determinación de la aptitud de los métodos de recuento microbiano que permitió indicar la metodología adecuada para evaluar la biocarga microbiana en los colutorios. Esta prueba indicó que el polisorbato 80 al 1% es un agente neutralizante idóneo para recuperar el S. mutans si se encuentra presente en los colutorios de AEO al 0.05 % y 0.10 %, y la mezcla de tiosulfato de sodio al 0.3 %, lecitina al 0.5% y polisorbato 80 al 1 % es la indicada para neutralizar las propiedades antimicrobianas del colutorio de clorhexidina al 0.12 % ylograr una recuperación adecuada del microorganismo en estudio cuando estuviera presente. Finalmente, se realizó la determinación de la eficacia antibacteriana de los colutorios de AEO, el vehículo de estos y un colutorio comercial de clorhexidina sobre S. mutans, los resultados reflejaron que el porcentaje máximo alcanzado de reducción para los colutorios de AEO al 0.05% y 0.10 % fue de 48.280 % a los 15 minutos y de 78.535 % en 1 minuto respectivamente, dichas reducciones fueron mayores que la que presento el vehículo, la cual fue de 29.292 % a los 15 minutos. El colutorio de clorhexidina al 0.12 % fue el que produjo la máxima reducción del microorganismo de estudio, la cual fue de99.996% en 6 minutos. Todos los ensayos se realizaron en el laboratorio del Centro de Investigación y Desarrollo en Salud, durante el periodo de julio a septiembre de 2015. Se concluyó que, ningún colutorio alcanzó el 99.999 % de reducción especificado por la AOAC para germicidas y sanitizantes, se observaron reducciones que sugieren buenas perspectivas de desarrollo para este tipo de formulaciones que incluyen activos de origen natural, por lo tanto se recomienda la necesidad de realizar más estudios sobre la composición y diferentes actividades del aceite esencial de orégano que pueden aprovecharse en futuras formulaciones.

Synthesis and characterisation of organo-beidellite

Today, there are growing concerns about the presence of environmental pollutants in many parts of the world. In particular, a lot of attention has been drawn to the levels of water and soil contaminants (de Paiva et al., 2008). The majority of these contaminants consist of NOCs (non-ionic organic compounds) and can enter our waterways through industrial activities, mining operations, crop and animal production, waste disposal and accidental leakage (de Paiva et al., 2008; Park et al., 2011). Therefore, there is an increased interest in the synthesis of new materials that can be used to remove potentially carcinogenic and toxic water contaminants. Smectite type organoclays are widely used in numerous applications, such as sorbent agents for environmental remediation, due to their unique properties (Jiunn-Fwu et al., 1990; Sheng et al., 1996; Zhou et al., 2007; Bektas et al., 2011; Park et al., 2011). This investigation focuses on beidellite (SBId-1), which belongs to the smectite clay family. Their properties include high cation exchange capacity (CEC), swelling properties, porous, high surface area and consequential strong adsorption/absorption capacity (Xi et al., 2007). However, swelling clays in general are not an effective sorbent agent in nature due to their hydrophilic properties. The hydrophilic properties of the clay can be changed to organophilic by intercalating a cationic surfactant. Many applications of organoclays are strongly dependent on their structural properties and hence, a better understanding of the configuration and structural change of organoclay is crucial. Organoclays were synthesised through ion exchange of 21CODTMA (MW: 392.5 g mol-1) and characterised using XRD and FTIR spectroscopy. This study investigates the structural and conformational changes of beidellite intercalated with octadecyltrimethylammonium bromide.

Organo-LDH synthesized via tricalcium aluminate hydration in the present of Na-dodecylbenzenesulfate aqueous solution and subsequent investigated by near-infrared and mid-infrared

Na-dodecylbenzenesulfate (SDBS), a natural anionic surfactant, has been successfully intercalated into a Ca based LDH host structure during tricalcium aluminate hydration in the presence of SDBS aqueous solution (CaAl-SDBS-LDH). The resulting product was characterized by powder X-ray diffraction (XRD), mid-infrared (MIR) spectroscopy combined with near-infrared (NIR) spectroscopy technique, thermal analysis (TG–DTA) and scan electron microscopy (SEM). The XRD results revealed that the interlayer distance of resultant product was expanded to 30.46 Å. MIR combined with NIR spectra offered an effective method to illustrate this intercalation. The NIR spectra (6000–5500 cm−1) displayed prominent bands to expound SDBS intercalated into hydration product of C3A. And the bands around 8300 cm−1 were assigned to the second overtone of the first fundamental of CH stretching vibrations of SDBS. In addition, thermal analysis showed that the dehydration and dehydroxylation took place at ca. 220 °C and 348 °C, respectively. The SEM results appeared approximately hexagonal platy crystallites morphology for CaAl-SDBS-LDH, with particle size smaller and thinner.

Adsorption of the herbicide 2,4-D on organo-palygorskite

Among the clay minerals, montmorillonite is the most extensively studied material using as adsorbents, but palygorskite and its organically modified products have been least explored for their potential use in contaminated water remediation. In this study, an Australian palygorskite was modified with cationic surfactants octadecyl trimethylammonium bromide and dioctadecyl dimethylammonium bromide at different doses. A full structural characterization of prepared organo-palygorskite by X-ray diffraction, infrared spectroscopy, surface analysis and thermogravimetric analysis was performed. The morphological changes of palygorskite before and after modification were recorded using scanning electron microscopy, which showed the surfactant molecules can attach on the surface of rod-like crystals and thus can weaken the interactions between palygorskite single crystals. Real surfactants loadings on organo-palygorskites were also calculated based on thermogravimetric analysis. 1 CEC, 2 CEC octadecyl trimethylammonium bromide modified palygorskites, 1 CEC and 2 CEC dioctadecyl dimethylammonium bromide modified palygorskites absorbed as much as 12 mg/g, 42 mg/g, 9 mg/g and 25 mg/g of 2,4- dichlorophenoxyacetic acid respectively. This study has shown a potential on organo-palygorskites for organic herbicide adsorption especially anionic ones from waste water. In addition, equilibration time effects and the Langmuir and Freundlich models fitting were also investigated in details.

Application of organo-beidellites for the adsorption of atrazine

The surfaces of natural beidellite were modified with cationic surfactant octadecyl trimethylammonium bromide at different concentrations. The organo-beidellite adsorbent materials were then used for the removal of atrazine with the goal of investigating the mechanism for the adsorption of organic triazine herbicide from contaminated water. Changes on the surfaces and structure of beidellite were characterised by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and BET surface analysis. Kinetics of the adsorption studies were also carried out which show that the adsorption capacity of the organoclays increases with increasing surfactant concentration up until 1.0 CEC surfactant loading, after which the adsorption capacity greatly decreases. TG analysis reveals that although the 2.0 CEC sample has the greatest percentage of surfactant by mass, most of it is present on external sites. The 0.5 CEC sample has the highest proportion of surfactant exchanged into the internal active sites and the 1.0 CEC sample accounts for the highest adsorption capacity. The goodness of fit of the pseudo-second order kinetic confirms that chemical adsorption, rather than physical adsorption, controls the adsorption rate of atrazine.

Bisphenol A sorption by organo-montmorillonite: Implications for the removal of organic contaminants from water

Remediation of bisphenol A (BPA) from aqueous solutions by adsorption using organoclays synthesized from montmorillonite (MMT) with different types of organic surfactant molecules was demonstrated. High adsorption capacities of the organoclays for the uptake of BPA were observed and these demonstrated their potential application as strong adsorbents for noxious organic water contaminants. The adsorption of BPA was significantly influenced by pH, with increased adsorption of BPA in acidic pH range. However, the organoclays intercalated with highly loaded surfactants and/or large surfactant molecules were less influenced by the pH of the environment and this was thought to be due to the shielding the negative charge from surfactant molecules and the development of more positive charge on the clay surface, which leads to the attraction of anionic BPA even at alkaline pH. The hydrophobic phase created by loaded surfactant molecules contributed to a partitioning phase, interacting with BPA molecules strongly through hydrophobic interaction. Pseudo-second order kinetic model and Langmuir isotherm provided the best fit for the adsorption of BPA onto the organoclays. In addition, the adsorption process was spontaneous and exothermic with lower temperature facilitating the adsorption of BPA onto the organoclays. The described process provides a potential pathway for the removal of BPA from contaminated waters.

Novel Organo-Noble-Gas Hydrides

Noble gases are mostly known as inert monatomic gases due to their limited reactivity with other elements. However, the first predictions of noble-gas compounds were suggested by Kossel in 1916, by von Antropoff in 1924, and by Pauling in 1930. It took many decades until the first noble-gas compound, XePtF6, was synthesized by Neil Bartlett in 1962. This was followed by gradual development of the field and many noble-gas compounds have been prepared. In 1995, a family of noble-gas hydride molecules was discovered at the University of Helsinki. These molecules have the general formula of HNgY, where H is a hydrogen atom, Ng is a noble-gas atom (Ar, Kr, or Xe), and Y is an electronegative fragment. The first molecular species made include HXeI, HXeBr, HXeCl, HKrCl and HXeH. Nowadays the total number of prepared HNgY molecules is 23 including both inorganic and organic compounds. The first and only neutral ground-state argon compound, HArF, was synthetized in 2000. Helium and neon are the only elements in the periodic table that do not form neutral, ground-state molecules. In this Thesis, experimental preparation of eight novel xenon- and krypton-containing organo-noble-gas hydrides made from acetylene (HCCH), diacetylene (HCCCCH) and cyanoacetylene (HCCCN) are presented. These novel species include the first organic krypton compound, HKrCCH, as well as the first noble-gas hydride molecule containing two Xe atoms, HXeCCXeH. Other new compounds are HXeCCH, HXeCC, HXeC4H, HKrC4H, HXeC3N, and HKrC3N. These molecules are prepared in noble-gas matrices (krypton or xenon) using ultraviolet photolysis of the precursor molecule and thermal mobilization of the photogenerated H atoms. The molecules were identified using infrared spectroscopy and ab initio calculations. The formation mechanisms of the organo-noble-gas molecules are studied and discussed in this context. The focus is to evidence experimentally the neutral formation mechanisms of HNgY molecules upon global mobility of H atoms. The formation of HXeCCXeH from another noble-gas compound (HXeCC) is demonstrated and discussed. Interactions with the surrounding matrix and molecular complexes of the HXeCCH molecule are studied. HXeCCH was prepared in argon and krypton solids in addition to a Xe matrix. The weak HXeCCH∙∙∙CO2 complex is prepared and identified. Preparation of the HXeCCH∙∙∙CO2 complex demonstrates an advanced approach to studies of HNgY complexes where the precursor complex (HCCH∙∙∙CO2) is obtained using photolysis of a larger molecule (propiolic acid).

Protonation and deprotonation induced organo/hydrogelation: Bile acid derived gelators containing a basic side chain

Two bile acid derived molecules containing basic amino groups are reported to be efficient and unusual gelators of organic and aqueous solvents.

Nanocomposite Made of an Oligo(p-phenylenevinylene)-Based Trihybrid Thixotropic Metallo(organo)gel Comprising Nanoscale Metal-Organic Particles, Carbon Nanohorns, and Silver Nanoparticles

A silver ion (Ag+)-triggered thixotropic metallo(organo)gel of p-pyridyl-appended oligo(p-phenylenevinylene) derivatives (OPVs) is reported for the first time. Solubilization of single-walled carbon nanohorns (SWCNHs) in solutions of the pure OPVs as well as in the metallogels mediated by pi-pi interactions has also been achieved. In situ fabrication of silver nanoparticles (AgNPs) in the SWCNH-doped dihybrid gel leads to the formation of a trihybrid metallogel. The mechanical strength of the metallogels could be increased step- wise in the order: freshly prepared gel Detailed studies suggest lamellar organizations of the linear metal ligand complexes in the NMOPs, which upon association create a three-dimensional network that eventually immobilizes the solvent molecules.