STRATÉGÉ – Study of Transparent Recognition, Accreditation Tools and Experience in a Global Environment

Engineering graduates of today, face a working environment that assumes global mobility in the labour market. This challenge means, amongst universities worldwide, a demand to increase the globalisation of educational programs, context, and increase and support the mobility of students through mechanisms such as student exchange and double masters degrees. Engineering student mobility from Australia is low with only a few Engineering Faculties encouraging students to go internationally. This comparative study, using universities in Australia and Europe, of feedback from students who have been on exchange or proposing to go on exchange, employers and faculty addresses the motivators and barriers to student mobility and exchange from the perspectives of the university, faculty, students and employers. Recommendations will be presented on how student mobility and exchange can be improved, and mechanisms such as double Masters Degrees, dual accreditation and Erasmus Mundus 2009 – 2013 can be utilised to improve student mobility.

Baby-friendly hospital accreditation, in-hospital care practices and breastfeeding : a population based survey

OBJECTIVES: To investigate the effect of Baby-Friendly Hospital Initiative (BFHI) accreditation and hospital care practices on breastfeeding rates at 1 and 4 months. METHODS: All women who birthed in Queensland, Australia, from February 1 to May 31, 2010, received a survey 4 months postpartum. Maternal, infant, and hospital characteristics; pregnancy and birth complications; and infant feeding outcomes were measured. RESULTS: Sample size was 6752 women. Breastfeeding initiation rates were high (96%) and similar in BFHI-accredited and nonaccredited hospitals. After adjustment for significant maternal, infant, clinical, and hospital variables, women who birthed in BFHI-accredited hospitals had significantly lower odds of breastfeeding at 1 month (adjusted odds ratio 0.72, 95% confidence interval 0.58–0.90) than those who birthed in non–BFHI-accredited hospitals. BFHI accreditation did not affect the odds of breastfeeding at 4 months or exclusive breastfeeding at 1 or 4 months. Four in-hospital practices (early skin-to-skin contact, attempted breastfeeding within the first hour, rooming-in, and no in-hospital supplementation) were experienced by 70% to 80% of mothers, with 50.3% experiencing all 4. Women who experienced all 4 hospital practices had higher odds of breastfeeding at 1 month (adjusted odds ratio 2.20, 95% confidence interval 1.78–2.71) and 4 months (adjusted odds ratio 2.93, 95% confidence interval 2.40–3.60) than women who experienced fewer than 4. CONCLUSIONS: When breastfeeding-initiation rates are high and evidence-based practices that support breastfeeding are common within the hospital environment, BFHI accreditation per se has little effect on both exclusive or any breastfeeding rates.C

A critical assessment of the Australian OHS accreditation system's "Body of Knowledge (BoK)"

In response to an increasing perception of poor OHS consultancy quality amongst the Australian public, regulator and OHS professionals, the Safety Institute Australia (SIA) was tasked by the Victorian government to establish an accreditation process for OHS professionals. The OHS accreditation board decided to base its accreditation on a core "body of knowledge" (BoK), against which applicants are assesssed. While the foundation and structure of the BoK is unclear, the BoK consists of a collection of essays from a variety of invited authors. The BoK comprises about 811 pages in 34 chapters, with significant redundancy and considerable subjective components. The SIA BoK is benchmarked against two international best-practices, the German "Core Definition, Object Catalog and Research Domains of Labour Science (Ergonomics)" (Luzcak, Volpert, Raeithel & Schwier, 1989)(100 pages) and the American "Core Competency Model" for the "Master's Degree in Public Health" (Association of Schools of Public Health, 2006) (21 pages). Both "core definition" and "core competency model" are on a comparative level to the BoK. While the German expert panel consisted of 14 eminent professors, the American panel consisted of 135 members, organized in 6 groups chaired by discipline leading academics. The Australian approach employed a broad approach, where 137 professionals, consultants, emerging academics and academics contributed to 8 workshops. Both the German and the American panels maintained an open communication amongst members and with the discipline community throughout the process, whereas SIA applied an open and directed peer-review process. Moreover, the German process involved an analysis of all congress content and journal publications in the scientific domain in a set timeframe, which were then systematically clustered. These results were further expanded by structured interviews with 38 professors in the discpline, grasping their research and teaching practice. The American workgroup however assumed core scientific areas, underlying the domain. Based upon the a-priori assumption, they then established well defined competencies across all areas using a modified Delphi process. Although the BoK attempts to explore the knowledge in the OHS domain without an imposed structure in a bottom-up approach, it does not result in a structured systematic of the science. We conclude that the outcome of the German, rigorous academic approach, and the US American democratic approach under unambiguous academic leadership both outperform the Australian advocacy group approach. This product was determined for both structure and content of the taxonomy delivered through the processes.

Reputation and Legitimacy : accreditation and rankings to assess organizations

A key perspective on reputation is that of assessment. Much of the communication literature focuses on the influence organizations have on impression formation. This chapter however suggests that in order to understand reputation assessment, it is also important to understand the related concept of legitimacy. It addresses two approaches to understanding reputation namely accreditation and ranking. Accreditation alludes to concepts of legitimacy in which firms may acquire credibility by meeting formalized standards of certification. Ranking deals with categorizing and rating organizational reputations so that they may be assessed relative to one another. The chapter explores the various ways in which the mechanisms of accreditation and ranking operate and the role of social actors in developing and applying them. Ranking systems that provide the mechanism for comparing organizations and assessing their relative value are also explored.

Exploring sustainability themes in engineering accreditation and curricula

Purpose This paper aims to present key findings from an inquiry into engineering accreditation and curricula renewal. The research attempted to ascertain conceptions of requisite sustainability themes among engineering academics and professionals. The paper also reflects on the potential role of professional engineering institutions (PEIs) in embedding sustainability through their programme accreditation guidelines and wider implications in terms of rapid curricula renewal. Design/methodology/approach This research comprised an International Engineering Academic Workshop held during the 2010 International Symposium on Engineering Education in Ireland, on “accreditation and sustainable engineering”. This built on the findings of a literature review that was distributed prior to the workshop. Data collection included individual questionnaires administered during the workshop, and notes scribed by workshop participants. Findings The literature review highlighted a wide range of perspectives across and within engineering disciplines, regarding what sustainability/sustainable development (SD) themes should be incorporated into engineering curricula, and regarding language and terminology. This was also reflected in the workshop discussions. Notwithstanding this diversity, clusters of sustainability themes and priority considerations were distilled from the literature review and workshop. These related to resources, technology, values, ethics, inter- and intra-generational equity, transdisciplinarity, and systems and complex thinking. Themes related to environmental and economic knowledge and skills received less attention by workshop participants than represented in the literature. Originality/value This paper provides an appreciation of the diversity of opinion regarding priority sustainability themes for engineering curricula, among a group of self-selected engineering academics who have a common interest in education for SD. It also provides some insights and caveats on how these themes might be rapidly integrated into engineering curricula.

Australian Library and Information Association Course Accreditation Review 2013

This report has been prepared for the Australian Library and Information Association (ALIA) in response to the request to undertake a literature review and environmental scan to inform discussions of the issues associated with professional accreditation. ALIA is the peak body which develops and monitors the professional standards that ensure the high quality of graduates entering the library and information services (LIS) profession in Australia. The report presents a themed discussion of the issues identified in the literature review and environmental scan to build a full picture of the role of course accreditation in LIS education. This is set against developments in the wider context of quality assurance in Australian tertiary education, to analyse the implications of this changing environment for ALIA’s accreditation policies and ractices.

Accreditation where accreditation is due

A laboratory with fully developed and accredited quality systems is highly desirable. In some cases it is mandatory. This is evidenced by the concerns raised when certain medical testing laboratories have not maintained appropriate standards to retain their accreditation with NATA. Whether or not third party accreditation is mandated, good laboratory practice based on sustainable systems is required. Internationally accepted standard ISO/IEC 17025 provides specific guidelines for operating a laboratory that may be accredited. To what extent should a university laboratory implement this standard? Is NATA accreditation necessary? As staffing and funding reduce is it possible to maintain high standard quality systems that are in reality truly required if assurance of results is due? Accreditation may be required where accreditation is due but is credit given by the institutions for the resources required to get there or stay there? These issues are considered in relation to university and commercial laboratories and specific case points are raised from experience with NATA accreditation in the School of Civil Engineering, QUT.

The discursive positioning of graduating teachers in accreditation of teacher education programs

This paper uses discourse analysis techniques associated with Foucauldian archaeology to examine a teacher education accreditation document from Australia to reveal how graduating teachers are constructed through the discourses presented. The findings reveal a discursive site of contestation within the document itself and a mismatch between the identified policy discourses and those from the academic archive. The authors suggest that rather than contradictory representations of what constitutes graduating teacher quality and professionalism, what is needed is an accreditation process that agrees on constructions of graduate identity and professional practice that enact an intellectual and reflexive form of professionalism.

Development and Accreditation of an Applied Climate Education Unit for Sustainable Land Use in Australia

In recent years, there have been significant developments in climate science relevant to agriculture and natural resource management. Assessing impacts of climate variability and use of seasonal climate forecasts have become increasingly important elements in the management "toolkit" for many Australian farmers. Consideration of climate change further increases the need for improved management strategies. While climate risk extension activities have kept pace with advances in climate science, a national review of the Vocational Education and Training system in Australia in relation to "weather and climate" showed that these topics were "poorly represented" at the management level in the Australian Qualifications Framework, and needed increased emphasis. Consequently, a new Unit of Competency concerning management of climatic risk was developed and accredited to address this deficiency. The objective of the unit was to build knowledge and skills for better management of climate variability via the elements of surveying climatic and enterprise data; analysing climatic risks and opportunities; and developing climatic risk management strategies. This paper describes establishment of a new unit for vocational education that is designed to harness recent developments in applied climate science for better management of Australia's highly variable climate. The main benefits of the new unit of competency, "Developing climatic risk management strategies,"were seen as improving decisions in climate and agriculture, and reducing climate risk exposure to enhance sustainable agriculture. The educational unit is now within the scope of agricultural colleges, universities, and registered training organisations as an accredited unit.

Quality Assurance for GCxGC-FID, Accreditation for TPH CWG Protocol

A new technological approach in the analysis and forensic interpretation of Total Hydrocarbons in soils and waters using 2D Gas Chromatography method (GC-GC) was developed alongside environmental forensic and the assessment models to provide better customer products for the environmental industry.
The objective was to develop an analytical methodology for TPH CWG. Raw data from this method is then to be evaluated for forensic interpretation and risk assessment modelling. Access will be made available to the expertise in methods of forensic tracing contaminant sources, transport modelling, human health risk modelling and detailed quantitative risk assessment.
The quantification of internal standards was key to the development of this method. As the laboratory does not test for TPH in 1D, it was requested during INAB ISO 17025 audit to individually map out where each compound falls chromatographically in the 2D. This was done through comparing carbon equivalent numbers to the n-alkane carbons. This proved e.g. 2-methylnaphthalene has 11 carbons in its structure; its carbon equivalent is 12.84 , the result of which falls within the band of Aromatic eC12-eC16 as opposed to expected eC10-eC12. This was carried out for all 16 PAH (polyaromatic hydrocarbons) and BTEX (benzene, toluene, ethylbenzene and o, m and p-xylenes). The n-alkanes were also assigned to their corresponding aliphatic bands e.g. nC8 would be expected to be in nC8-nC10.
The method was validated through a designated systematic experimental protocol and was challenged with spikes of known concentration of hydrocarbon parameters such as recoveries, precision, bias and linearity. The method was verified by testing a certified reference material which was used as a proficiency round of testing for numerous laboratories.
It is hoped that the method will be used in conjunction with the analysis through Bonn Agreement with their OSINet group. This is a panel of experts and laboratories (including CLS) who forensically identify oil spill contamination from a water source.
This method can prove itself to be a robust method and benefit the industry for contaminated land and water but the method needs to be seen as separate from the regular 1D chromatography. It will help identify contaminants and assist consultants, regulators, clients and scientists valuable information not seen in 1D