石油污染土壤的物理化学处理-生物修复工艺与技术研究

由于污染条件不同，造成石油污染土壤的污染程度、污染性质差异很大，单纯依靠一种方法或技术难以进行清洁和修复，并使其恢复土壤的自然属性，因此，必须采用物理、化学、生物及工程方法进行综合治理.该项工作基于国内外同类研究基础，根据土壤中石油类污染物的含量和性质，提出了石油污染土壤物理化学净化—生物修复的基本思想，采取了有针对性的分级、分段处理方法，研究和开发了高效低耗、经济易行的处理技术，并建立了相应的示范工程，为该技术的应用和推广奠定了基础.

稠油污染土壤生物修复的微生物筛选及工艺调控

稠油组分非常复杂，胶质沥青质含量较高，使稠油污染土壤的生物修复难度很大。对稠油中胶质沥青质分的降解是彻底修复稠油污染土壤的关键。试验中利用辽河油田污染土壤中筛选并纯化出来的几株细菌、真菌和放线菌，以胶质沥青质作为碳源，考察不同菌株处理的去除率变化。发现0d-14d期间是微生物去除胶质沥青质的活跃期，42d之后土壤中胶质沥青质的减少趋缓，是生物修复的转折点。筛选出优势降解菌株：细菌22B；真菌中F2006、F2008、F9902，放线菌A2013、A2016混合菌F2006+22B、F6＋22B。同时考查了表面活性剂吐温-80对菌株去除胶质沥青质能力的影响，发现吐温-80对不同菌株有促进或抑制作用。利用上述优势菌株处理5ryn稠油污染土壤，并在42d时，通过采取补加菌液、添加N、P营养物质和添加碳源处理来提高微生物对土壤中稠油的去除能力。经过56天的处理，细菌22B对稠油的去除率最高，达27．420＆；混合菌的去除率在23.64％-26.24％。比较三种处理措施对微生物降解稠油能力的影响时，发现不同菌株对这三种措施的反应并不相同。同时土壤中残留石油烃的族分析证实了土壤中的重质成分是可以被微生物降解的；而稠油污染土壤中的烷烃和芳香烃的含量则呈现动态变化。稠油污染土壤的生物修复后的毒性检验表明，不同菌株处理土壤的毒性因选择的菌株及采取的措施不同而异，其中土壤毒性最小的是22B添加碳源处理；毒性最强的是F2008加菌处理。补加菌液、添加营养和碳源措施会使微生物对稠油降解能力有所加强，但是也加速了某些微生物产生毒性较稠油更大的中间产物的生成，使土壤更加不适合植物的生长。本研究从辽河油田污染土壤中筛选出石油烃降解菌株，对稠油中最难降解的胶质沥青质进行处理，从中选择优势的降解菌株对稠油污染土壤进行生物修复，为稠油污染土壤的生物修复打下理论基础。

Remediation of Persistent Organic Pollutants (POPs) in Two Different Soils

Persistent organic pollutants (POPs) are a set of chemicals that are toxic, persist in the environment for long periods of time, and biomagnify as they move up through the food chain. The most widely used method of POP destruction is incineration, which is expensive and could result in undesirable by-products. An alternative bioremediation technology, which is cheaper and environ-mentally friendly, was tested during this experiment. Two different soil types containing high and low organic matter (OM) were spiked with 100 mg/kg each of pyrene and Aroclor 1248 and planted with three different species of grasses. The objective of the study was to determine residue recovery levels (availability) and potential effectiveness of these plant species for the remediation of POPs. The results showed that recovery levels were highly dependent on the soil organic matter content—very low in all treatments with the high OM content soil compared to recoveries in the low OM soil. This indicates that availability, and, hence, biodegradability of the contaminants is dependent on the organic matter content of the soil. Moreover, the degree of availability was also significantly different for the two classes of chemicals. The polyaromatic hydrocarbon (PAH) recovery (availability) was extremely low in the high organic matter content soil compared to that of the polychlorinated biphenyls (PCBs). In both soil types, all of the plant species treatments showed significantly greater PCB biodegradation compared to the unplanted controls. Planting did not have any significant effect on the transformation of the PAHs in both soil types; however, planting with switchgrass was the best remedial option for both soil types contaminated with PCB.

石油污染土壤的生物修复技术

The soil contaminated by petroleum hydrocarbons and main methods of cleaning the pollutants were dealt with in the paper.The key principles,technological types, effect factors ,consolidation of the technology,present situation and development of the bioremediation of the soil contaminated by petroleum hydrocarbons were presented.

Density-dependent effects on seston dynamics and rates of filtering and biodeposition of the suspension-cultured scallop Chlamys farreri in a eutrophic bay (northern China): An experimental study in semi-in situ flow-through systems

Effects of stocking density on seston dynamics and filtering and biodeposition by the suspension-cultured Zhikong scallop Chlamys farreri Jones et Preston in a eutrophic bay (Sishili Bay, northern China), were determined in a 3-month semi-field experiment with continuous flow-through seawater from the bay. Results showed that the presence of the scallops could strongly decrease seston and chlorophyll a concentrations in the water column. Moreover, in a limited water column, increasing scallop density could cause seston depletion due to scallop's filtering and biodeposition process, and impair scallop growth. Both filtration rate and biodeposition rate of C. farreri showed significant negative correlation with their density and positive relationship with seston concentration. Calculation predicts that the daily removal of suspended matter from water column by the scallops in Sishili Bay ecosystem can be as high as 45% of the total suspended matter; and the daily production of biodeposits by the scallops in early summer in farming zone may amount to 7.78 g m(-2), with daily C, N and P biodeposition rates of 3.06 x 10(-1), 3.86 x 10(-2) and 9.80 x 10(-3) g m(-2), respectively. The filtering and biodeposition by suspension-cultured scallops could substantially enhance the deposition of total suspended particulate material, suppress accumulation of particulate organic matter in water column, and increase the flux of C, N and P to benthos, strongly enhancing pelagic-benthic coupling. It was suggested that the filtering-biodeposition process by intensively suspension-cultured bivalve filter-feeders could exert strong top-down control on phytoplankton biomass and other suspended particulate material in coastal ecosystems. This study also indicated that commercially suspension-cultured bivalves may simultaneously and potentially aid in mitigating eutrophication pressures on coastal ecosystems subject to anthropogenic N and P loadings, serving as a eutrophic-environment bioremediator. The ecological services (e.g. filtering capacity, top-down control, and benthic-pelagic coupling) functioned by extractive bivalve aquaculture should be emphasized in coastal ecosystems. (c) 2005 Elsevier B.V. All rights reserved.

Metabolic studies on the nitrophile yeast Rhodotorula glutinis DSBCA06

Nitrogen is the most abundant element in atmosphere and fundamental component of proteins, nucleic acids and other essential molecules. In the past century the industrial use of nitrogen compounds has grown exponentially causing widespread pollution. Nitrogen pollution has wide-ranging impacts including contributions to global warming, acid rains and eutrophication. Reduction of nitrogen use in industry and agriculture coupled whit remediation treatments could represent a solution. To this purpose we isolated from environmental samples a nitrophile strain capable of removing nitrogen compounds efficiently from the medium. Through the molecular characterization, we identified the strain as a Rhodotorula glutinis that we called DSBCA06. We examined the main metabolic features of the strain, also to determine the best growing conditions. At the same time, the ability of the strain to grow in presence of high nitrite concentrations was assayed, being a relevant feature poorly studied earlierfor other environmental yeasts. The ability of the strain to grow in presence of heavy metal cations was also tested, showing a noticeable tolerance. The cost of bioremediation treatments is often a problem. One of the way to obviate this is to produce valuable secondary metabolites, capable of positively impact the cost of the processes. In this context the ability of the strain to produce carotenoids, natural molecules with antioxidant properties used for food production, cosmetic and pharmaceutical industry, has been evaluated. The strain Rhodotorula glutinis DSBCA06 showed interesting features suggesting its possible use in bioremediation or industrials process for production of secondary metabolites such as lipids and carotenoids.

Investigation of polyhydroxyalkanoate production by an activated sludge microbial consortium treating artificial dairy wastewater

Petrochemical plastics/polymers are a common feature of day to day living as they occur in packaging, furniture, mobile phones, computers, construction equipment etc. However, these materials are produced from non-renewable materials and are resistant to microbial degradation in the environment. Considerable research has therefore been carried out into the production of sustainable, biodegradable polymers, amenable to microbial catabolism to CO2 and H2O. A key group of microbial polyesters, widely considered as optimal replacement polymers, are the Polyhydroxyalkaonates (PHAs). Primary research in this area has focused on using recombinant pure cultures to optimise PHA yields, however, despite considerable success, the high costs of pure culture fermentation have thus far hindered the commercial viability of PHAs thus produced. In more recent years work has begun to focus on mixed cultures for the optimisation of PHA production, with waste incorporations offering optimal production cost reductions. The scale of dairy processing in Ireland, and the high organic load wastewaters generated, represent an excellent potential substrate for bioconversion to PHAs in a mixed culture system. The current study sought to investigate the potential for such bioconversion in a laboratory scale biological system and to establish key operational and microbial characteristics of same. Two sequencing batch reactors were set up and operated along the lines of an enhanced biological phosphate removal (EBPR) system, which has PHA accumulation as a key step within repeated rounds of anaerobic/aerobic cycling. Influents to the reactors varied only in the carbon sources provided. Reactor 1 received artificial wastewater with acetate alone, which is known to be readily converted to PHA in the anaerobic step of EBPR. Reactor 2 wastewater influent contained acetate and skim milk to imitate a dairy processing effluent. Chemical monitoring of nutrient remediation within the reactors as continuously applied and EBPR consistent performances observed. Qualitative analysis of the sludge was carried out using fluorescence microscopy with Nile Blue A lipophillic stain and PHA production was confirmed in both reactors. Quantitative analysis via HPLC detection of crotonic acid derivatives revealed the fluorescence to be short chain length Polyhydroxybutyrate, with biomass dry weight accumulations of 11% and 13% being observed in reactors 1 and 2, respectively. Gas Chromatography-Mass Spectrometry for medium chain length methyl ester derivatives revealed the presence of hydroxyoctanoic, -decanoic and -dodecanoic acids in reactor 1. Similar analyses in reactor 2 revealed monomers of 3-hydroxydodecenoic and 3-hydroxytetradecanoic acids. Investigation of the microbial ecology of both reactors as conducted in an attempt to identify key species potentially contributing to reactor performance. Culture dependent investigations indicated that quite different communities were present in both reactors. Reactor 1 isolates demonstrated the following species distributions Pseudomonas (82%), Delftia acidovorans (3%), Acinetobacter sp. (5%) Aminobacter sp., (3%) Bacillus sp. (3%), Thauera sp., (3%) and Cytophaga sp. (3%). Relative species distributions among reactor 2 profiled isolates were more evenly distributed between Pseudoxanthomonas (32%), Thauera sp (24%), Acinetobacter (24%), Citrobacter sp (8%), Lactococcus lactis (5%), Lysinibacillus (5%) and Elizabethkingia (2%). In both reactors Gammaproteobacteria dominated the cultured isolates. Culture independent 16S rRNA gene analyses revealed differing profiles for both reactors. Reactor 1 clone distribution was as follows; Zooglea resiniphila (83%), Zooglea oryzae (2%), Pedobacter composti (5%), Neissericeae sp. (2%) Rhodobacter sp. (2%), Runella defluvii (3%) and Streptococcus sp. (3%). RFLP based species distribution among the reactor 2 clones was as follows; Runella defluvii (50%), Zoogloea oryzae (20%), Flavobacterium sp. (9%), Simplicispira sp. (6%), Uncultured Sphingobacteria sp. (6%), Arcicella (6%) and Leadbetterella bysophila (3%). Betaproteobacteria dominated the 16S rRNA gene clones identified in both reactors. FISH analysis with Nile Blue dual staining resolved these divergent findings, identifying the Betaproteobacteria as dominant PHA accumulators within the reactor sludges, although species/strain specific allocations could not be made. GC analysis of the sludge had indicated the presence of both medium chain length as well short chain length PHAs accumulating in both reactors. In addition the cultured isolates from the reactors had been identified previously as mcl and scl PHA producers, respectively. Characterisations of the PHA monomer profiles of the individual isolates were therefore performed to screen for potential novel scl-mcl PHAs. Nitrogen limitation driven PHA accumulation in E2 minimal media revealed a greater propensity among isoates for mcl-pHA production. HPLC analysis indicated that PHB production was not a major feature of the reactor isolates and this was supported by the low presence of scl phaC1 genes among PCR screened isolates. A high percentage distribution of phaC2 mcl-PHA synthase genes was recorded, with the majority sharing high percentage homology with class II synthases from Pseudomonas sp. The common presence of a phaC2 homologue was not reflected in the production of a common polymer. Considerable variation was noted in both the monomer composition and ratios following GC analysis. While co-polymer production could not be demonstrated, potentially novel synthase substrate specificities were noted which could be exploited further in the future.

Production and characterization of a trehalolipid biosurfactant produced by the novel marine bacteriumRhodococcussp., strain PML026

AIMS: The aim of this study was to evaluate biosurfactant production by a novel marine Rhodococcus sp., strain PML026 and characterize the chemical nature and properties of the biosurfactant. METHODS AND RESULTS: A novel marine bacterium (Rhodococcus species; strain PML026) was shown to produce biosurfactant in the presence of hydrophobic substrate (sunflower oil). Biosurfactant production (identified as a trehalolipid) was monitored in whole-batch cultures (oil layer and aqueous phase), aqueous phase (no oil layer) and filtered (0·2mum) aqueous phase (no oil or cells; extracellular) and was shown to be closely associated with growth/biomass production. Extracellular trehalolipid levels increased postonset of stationary growth phase. Purified trehalolipid was able to reduce the surface tension of water to 29mN m(-1) at Critical Micellar Concentration (CMC) of c. 250mgl(-1) and produced emulsions that were stable to a wide range of conditions (pH 2-10, temperatures of 20-100°C and NaCl concentrations of 5-25% w/v). Separate chemical analyses of the intact trehalolipid and its constituents demonstrated the compound was in fact a mixture of homologues (>1180MW) consisting of a trehalose moiety esterified to a series of straight chain and hydroxylated fatty acids. CONCLUSIONS: The trehalolipid biosurfactant produced by the novel marine strain Rhodococcus sp. PML026 was characterized and exhibited high surfactant activity under a wide range of conditions. SIGNIFICANCE AND IMPACT OF STUDY: Strain PML026 of Rhodococcus sp. is a potential candidate for bioremediation or biosurfactant production for various applications.

Polychaete burrows harbour distinct microbial communities in oil-contaminated coastal sediments

Previous studies have shown that the bioturbating polychaete Hediste (Nereis) diversicolor can affect the composition of bacterial communities in oil-contaminated sediments, but have not considered diversity specifically within bioturbator burrows or the impact on microbial eukaryotes. We tested the hypothesis that H. diversicolor burrows harbour different eukaryotic and bacterial communities compared with un-bioturbated sediment, and that bioturbation stimulates oil degradation. Oil-contaminated sediment was incubated with or without H. diversicolor for 30 days, after which sediment un-affected by H. diversicolor and burrow DNA/RNA samples were analysed using quantitative reverse transcription PCR (Q-RT-PCR) and high-throughput sequencing. Fungi dominated both burrow and un-bioturbated sediment sequence libraries; however, there was significant enrichment of bacterivorous protists and nematodes in the burrows. There were also significant differences between the bacterial communities in burrows compared with un-bioturbated sediment. Increased activity and relative abundance of aerobic hydrocarbon-degrading bacteria in the burrows coincided with the significant reduction in hydrocarbon concentration in the bioturbated sediment. This study represents the first detailed assessment of the effect of bioturbation on total microbial communities in oil-contaminated sediments. In addition, it further shows that bioturbation is a significant factor in determining microbial diversity within polluted sediments and plays an important role in stimulating bioremediation.

Physicochemical and mineralogical characteristics of soil/saprolite cores from a field research site, Tennessee

Site characterization is an essential initial step in determining the feasibility of remedial alternatives at hazardous waste sites. Physicochemical and mineralogical characterization of U-contaminated soils in deeply weathered saprolite at Area 2 of the DOE Field Research Center (FRC) site, Oak Ridge, TN, was accomplished to examine the feasibility of bioremediation. Concentrations of U in soil–saprolite (up to 291 mg kg–1 in oxalate-extractable Uo) were closely related to low pH (ca. 4–5), high effective cation exchange capacity without Ca (64.7–83.2 cmolc kg–1), amorphous Mn content (up to 9910 mg kg–1), and the decreased presence of relative clay mineral contents in the bulk samples (i.e., illite 2.5–12 wt. %, average 32 wt. %). The pH of the fill material ranged from 7.0 to 10.5, whereas the pH of the saprolite ranged from 4.5 to 8. Uranium concentration was highest (about 300 mg kg–1) at around 6 m below land surface near the saprolite–fill interface. The pH of ground water at Area 2 tended to be between 6 and 7 with U concentrations of about 0.9 to 1.7 mg L–1. These site specific characteristics of Area 2, which has lower U and nitrate contamination levels and more neutral ground water pH compared with FRC Areas 1 and 3 (ca. 5.5 and

Microbial analysis of soil and groundwater from a gasworks site and comparison to a sequenced biological reactive barrier remediation process (SEREBAR)

Aims: To investigate the distribution of a polymicrobial community of biodegradative bacteria in (i) soil and groundwater at a former manufactured gas plant (FMGP) site and (ii) in a novel SEquential REactive BARrier (SEREBAR) bioremediation process designed to bioremediate the contaminated groundwater. Methods and Results: Culture-dependent and culture-independent analyses using denaturing gradient gel electrophoresis (DGGE) and polymerase chain reaction (PCR) for the detection of 16S ribosomal RNA gene and naphthalene dioxygenase (NDO) genes of free-living (planktonic groundwater) and attached (soil biofilm) samples from across the site and from the SEREBAR process was applied. Naphthalene arising from groundwater was effectively degraded early in the process and the microbiological analysis indicated a dominant role for Pseudomonas and Comamonas in its degradation. The microbial communities appeared highly complex and diverse across both the sites and in the SEREBAR process. An increased population of naphthalene degraders was associated with naphthalene removal. Conclusion: The distribution of micro-organisms in general and naphthalene degraders across the site was highly heterogeneous. Comparisons made between areas contaminated with polycyclic aromatic hydrocarbons (PAH) and those not contaminated, revealed differences in the microbial community profile. The likelihood of noncultured bacteria being dominant in mediating naphthalene removal was evident. Significance and Impact of the Study: This work further emphasizes the importance of both traditional and molecular-based tools in determining the microbial ecology of contaminated sites and highlights the role of noncultured bacteria in the process.

Geophysical imaging of stimulated microbial biomineralization

Understanding how microorganisms influence the physical and chemical properties of the subsurface is hindered by our inability to observe microbial dynamics in real time and with high spatial resolution. Here, we investigate the use of noninvasive geophysical methods to monitor biomineralization at the laboratory scale during stimulated sulfate reduction under dynamic flow conditions. Alterations in sediment characteristics resulting from microbe-mediated sulfide mineral precipitation were concomitant with changes in complex resistivity and acoustic wave propagation signatures. The sequestration of zinc and iron in insoluble sulfides led to alterations in the ability of the pore fluid to conduct electrical charge and of the saturated sediments to dissipate acoustic energy. These changes resulted directly from the nucleation, growth, and development of nanoparticulate precipitates along grain surfaces and within the pore space. Scanning and transmission electron microscopy (SEM and TEM) confirmed the sulfides to be associated with cell surfaces, with precipitates ranging from aggregates of individual 3-5 nm nanocrystals to larger assemblages of up to 10-20 m in diameter. Anomalies in the geophysical data reflected the distribution of mineral precipitates and biomass over space and time, with temporal variations in the signals corresponding to changes in the aggregation state of the nanocrystalline sulfides. These results suggest the potential for using geophysical techniques to image certain subsurface biogeochemical processes, such as those accompanying the bioremediation of metal-contaminated aquifers.