Queering U.S. History Museums: Heteronormative Histories, Digital Disruptions

Thesis (Ph.D.)--University of Washington, 2016-06

Derivations of variational gaussian process approximation framework

Recently, within the VISDEM project (EPSRC funded EP/C005848/1), a novel variational approximation framework has been developed for inference in partially observed, continuous space-time, diffusion processes. In this technical report all the derivations of the variational framework, from the initial work, are provided in detail to help the reader better understand the framework and its assumptions.

Surface acoustic wave devices with low loss and high frequency operation

This thesis describes an industrial research project carried out in collaboration with STC Components, Harlow, Essex. Technical and market trends in the use of surface acoustic wave (SAW) devices are reviewed. As a result, three areas not previously addressed by STC were identified: lower insertion loss designs, higher operating frequencies and improved temperature dependent stability. A review of the temperature performance of alternative lower insertion loss designs,shows that greater use could be made of the on-site quartz growing plant. Data is presented for quartz cuts in the ST-AT range. This data is used to modify the temperature performance of a SAW filter. Several recently identified quartz orientations have been tested. These are SST, LST and X33. Problems associated with each cut are described and devices demonstrated. LST quartz, although sensitive to accuracy of cut, is shown to have an improved temperature coefficient over the normal ST orientation. Results show that its use is restricted due to insertion loss variations with temperature. Effects associated with split-finger transducers on LST-quartz are described. Two low-loss options are studied, coupled resonator filters for very narrow bandwidth applications and single phase unidirectional transducers (SPUDT) for fractional bandwidths up to about 1%. Both designs can be implemented with one quarter wavelength transducer geometries at operating frequencies up to 1GHz. The SPUDT design utilised an existing impulse response model to provide analysis of ladder or rung transducers. A coupled resonator filter at 400MHz is demonstrated with a matched insertion loss of less than 3.5dB and bandwidth of 0.05%. A SPUDT device is designed as a re-timing filter for timing extraction in a long haul PCM transmission system. Filters operating at 565MHz are demonstrated with insertion losses of less than 6dB. This basic SPUDT design is extended to a maximally distributed version and demonstrated at 450MHz with 9.8dB insertion loss.

Construção da plataforma de e-Learning do Instituto Politécnico de Santarém

Relatório de estágio apresentado para obtenção do grau de mestre em Educação e Comunicação Multimédia.

Construção da plataforma de e-Learning do Instituto Politécnico de Santarém

Relatório de estágio apresentado para obtenção do grau de mestre em Educação e Comunicação Multimédia.

Primary Care Service Areas in South Carolina

This project was developed in collaboration with the South Carolina Department of Health and Environmental Control Primary Care Office in order to identify primary care market areas and resources within South Carolina. Primary Care Service Areas are designed to identify small geographic areas that are relatively self-contained markets for primary care. Included is a map and listing for Primary Care Service Areas in the state.

An internet-supported physical activity intervention delivered in secondary schools located in low socio-economic status communities : study protocol for the activity and motivation in physical education (AMPED) cluster randomized controlled trial

BACKGROUND: School-based physical education is an important public health initiative as it has the potential to provide students with regular opportunities to participate in moderate-to-vigorous physical activity (MVPA). Unfortunately, in many physical education lessons students do not engage in sufficient MVPA to achieve health benefits. In this trial we will test the efficacy of a teacher professional development intervention, delivered partially via the Internet, on secondary school students' MVPA during physical education lessons. Teaching strategies covered in this training are designed to (i) maximize opportunities for students to be physically active during lessons and (ii) enhance students' autonomous motivation towards physical activity. METHOD: A two-arm cluster randomized controlled trial with allocation at the school level (intervention vs. usual care control). Teachers and Year 8 students in government-funded secondary schools in low socio-economic areas of the Western Sydney region of Australia will be eligible to participate. During the main portion of the intervention (6 months), teachers will participate in two workshops and complete two implementation tasks at their school. Implementation tasks will involve video-based self-reflection via the project's Web 2.0 platform and an individualized feedback meeting with a project mentor. Each intervention school will also complete two group peer-mentoring sessions at their school (one per term) in which they will discuss implementation with members of their school physical education staff. In the booster period (3 months), teachers will complete a half-day workshop at their school, plus one online implementation task, and a group mentoring session at their school. Throughout the entire intervention period (main intervention plus booster period), teachers will have access to online resources. Data collection will include baseline, post-intervention (7-8 months after baseline) and maintenance phase (14-15 months after baseline) assessments. Research assistants blinded to group allocation will collect all data. The primary outcome will be the proportion of physical education lesson time that students spend in MVPA. Secondary outcomes will include leisure-time physical activity, subjective well-being, and motivation towards physical activity.
DISCUSSION: The provision of an online training platform for teachers could help facilitate more widespread dissemination of evidence-based interventions compared with programs that rely exclusively on face-to-face training.

IMPROVED SAMPLE INTRODUCTION SYSTEMS FOR INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY AND THEIR APPLICATION TO THE ANALYSIS OF SIMPLE AND COMPLEX MATRICES

The objective of this thesis is to explore new and improved methods for greater sample introduction efficiency and enhanced analytical performance with inductively coupled plasma optical emission spectrometry (ICP-OES). Three projects are discussed in which the capabilities and applications of ICP-OES are expanded: 1. In the first project, a conventional ultrasonic nebuliser was modified to replace the heater/condenser with an infrared heated pre-evaporation tube. In continuation from previous works with pre-evaporation, the current work investigated the effects of heating with infrared block and rope heaters on two different ICP-OES instruments. Comparisons were made between several methods and setups in which temperatures were varied. By monitoring changes to sensitivity, detection limit, precision, and robustness, and analyzing two certified reference materials, a method with improved sample introduction efficiency and comparable analytical performance to a previous method was established. 2. The second project involved improvements to a previous work in which a multimode sample introduction system (MSIS) was modified by inserting a pre-evaporation tube between the MSIS and torch. The new work focused on applying an infrared heated ceramic rope for pre-evaporation. This research was conducted in all three MSIS modes (nebulisation mode, hydride generation mode, and dual mode) and on two different ICP-OES instruments, and comparisons were made between conventional setups in terms of sensitivity, detection limit, precision, and robustness. By tracking both hydride-forming and non-hydride forming elements, the effects of heating in combination with hydride generation were probed. Finally, optimal methods were validated by analysis of two certified reference materials. 3. A final project was completed in collaboration with ZincNyx Energy Solutions. This project sought to develop a method for the overall analysis of a 12 M KOH zincate fuel, which is used in green energy backup systems. By employing various techniques including flow injection analysis and standard additions, a final procedure was formulated for the verification of K concentration, as well as the measurement of additives (Al, Fe, Mg, In, Si), corrosion products (such C from CO₃²¯), and Zn particles both in and filtered from solution. Furthermore, the effects of exposing the potassium zincate electrolyte fuel to air were assessed.

Reconstituição histórica virtual do retábulo-mor da Igreja do Espírito Santo de Évora: aplicação ao Património da infografia web-based

As a part of a multidisciplinary and integrated research, including conservation sciences and history, a proposal is presented for the historical reconstitution and the virtual restoration of the mannerist altarpiece of the main altar at the Espírito Santo Church, in Évora. The collected data is abundant and the scientific information, because of its technicality, is less prone to be easily understood by the general public, thus becoming less accessible. Web-based infographics are explored as privileged forms of disseminating results and raising awareness to Cultural Heritage. The project materializes as an Internet platform where data and a reconstitution proposal are shared in a visual and interactive way. In addition to the digital virtual reconstitution (2D), some tridimensional models (3D) are presented of various elements of the altarpiece, obtained using methods of computer graphics and digital photogrammetry

Final report : enabling team collaboration with pervasive and mobile computing

This is the final report of research project 2002-057-C: Enabling Team Collaboration with Pervasive and Mobile Computing. The research project was carried out by the Australian Cooperative Research Centre for Construction Innovation and has two streams that consider the use of pervasive computing technologies in two different contexts. The first context was the on-site deployment of mobile computing devices, where as the second context was the use and development of intelligent rooms based on sensed environments and new human-computer interfaces (HCI) for collaboration in the design office. The two streams present a model of team collaboration that relies on continues communication to people and information to reduce information leakage. This report consists of five sections: (1) Introduction; (2) Research Project Background; (3) Project Implementation; (4) Case Studies and Outcomes; and (5) Conclusion and Recommendation. Introduction in Section 1 presents a brief description of the research project including general research objectives and structure. Section 2 introduces the background of the research and detailed information regarding project participants, objectives and significance, and also research methodology. Review of all research activities such as literature review and case studies are summarised in Project Implementation in Section 3. Following this, in Section 4 the report then focuses on analysing the case studies and presents their outcomes. Conclusion and recommendation of the research project are summarised in Section 5. Other information to support the content of the report such as research project schedule is provided in Appendices. The purpose of the final project report is to provide industry partners with detailed information on the project activities and methodology such as the implementation of pervasive computing technologies in the real contexts. The report summarises the outcomes of the case studies and provides necessary recommendation to industry partners of using new technologies to support better project collaboration.

Citizen journalism and political participation : the youdecide project and the 2007 Australian Federal Election

The 2007 Australian Federal election not only saw the election of a Labor government after 11 years of John Howard’s conservative Coalition government. It also saw new levels of political engagement through the Internet, including the rise of citizen journalism as an alternative outlet and mode of reporting on the election. This paper reports on the You Decide 2007 project, an initiative undertaken by a QUT-based research team to facilitate online news reporting on the election on a ‘hyper-local’, electorate-based model. We evaluate the You Decide initiative on the basis of: promoting greater citizen participation in Australian politics; new ways of engaging citizens and key stakeholders in policy deliberation; establishing new links between mainstream media and independent online media; and broadening the base of political participation to include a wider range of citizen and groups.

Citizen journalism as social networking : reporting the 2007 Australian Federal Election

One of the perceived Achilles heels of online citizen journalism is its perceived inability to conduct investigative and first-hand reporting. A number of projects have recently addressed this problem, with varying success: the U.S.-based Assignment Zero was described as "a highly satisfying failure" (Howe 2007), while the German MyHeimat.de appears to have been thoroughly successful in attracting a strong community of contributors, even to the point of being able to generate print versions of its content, distributed free of charge to households in selected German cities. In Australia, citizen journalism played a prominent part in covering the federal elections held on 24 November 2007; news bloggers and public opinion Websites provided a strong counterpoint to the mainstream media coverage of the election campaign (Bruns et al., 2007). Youdecide2007.org, a collaboration between researchers at Queensland University of Technology and media practitioners at the public service broadcaster SBS, the public opinion site On Line Opinion, and technology company Cisco Systems, was developed as a dedicated space for a specifically hyperlocal coverage of the election campaign in each of Australia's 150 electorates from the urban sprawls of Sydney and Brisbane to the sparsely populated remote regions of outback Australia. YD07 provided training materials for would-be citizen journalists and encouraged them to contribute electorate profiles, interview candidates, and conduct vox-pops with citizens in their local area. The site developed a strong following especially in its home state of Queensland, and its interviewers influenced national public debate by uncovering the sometimes controversial personal views of mainstream and fringe candidates. At the same time, the success of YD07 was limited by external constraints determined by campaign timing and institutional frameworks. As part of a continuing action research cycle, lessons learnt from Youdecide2007.org are going to be translated into further iterations of the project, which will cover the local government elections in the Australian state of Queensland, to be held in March 2008, and developments subsequent to these elections. This paper will present research outcomes from the Youdecide2007.org project. In particular, it will examine the roles of staff contributors and citizen journalists in attracting members, providing information, promoting discussion, and fostering community on the site: early indications from a study of interaction data on the site indicate notably different contribution patterns and effects for staff and citizen participants, which may point towards the possibility of developing more explicit pro-am collaboration models in line with the Pro-Am phenomenon outlined by Leadbeater & Miller (2004). The paper will outline strengths and weaknesses of the Youdecide model and highlight requirements for the successful development of active citizen journalism communities. In doing so, it will also evaluate the feasibility of hyperlocal citizen journalism approaches, and their interrelationship with broader regional, state, and national journalism in both its citizen and industrial forms.

Australian nursing informatics competency project

A study of Australian nurses on their use of information technology in the workplace was undertaken by the Australian Nursing Federation (ANF) in 2007. This study of over 4000 nurses highlighted that nurses recognise benefits to adopting more information technology in the workplace although there are significant barriers to their use. It also identified gross deficits in the capacity of the nursing workforce to engage in the digital processing of information. Following the release of the study last year, the ANF commenced work on a number of key recommendations from the report in order to overcome identified barriers and provide opportunities for nurses to better utilise information technology and information management systems. One of these recommendations was to seek research funding to develop national information technology and information management competency standards for nurses. This project has now received Federal Government funding to undertake this development. This project is being developed in collaboration with the ANF and the Queensland University of Technology. This paper will discuss the methodology, development and publication of the Australian Nursing Informatics Competency Standards Project which is currently underway and due for completion in May 2009. The Australian Nursing Informatics Competencies will be presented at the conference.

Cherbourg time : young black and deadly art 2003-2007

Art is most often at the margins of community life, seen as a distraction or entertainment only; an individual’s whim. It is generally seen as without a useful role to play in that community. This is a perception of grown-ups; children seem readily to accept an engagement with art making. Our research has shown that when an individual is drawn into a crafted art project where they have an actual involvement with the direction and production of the art work, then they become deeply engaged on multiple levels. This is true of all age groups. Artists skilled in community collaboration are able to produce art of value that transcends the usual judgements of worth. It gives people a licence to unfetter their imagination and then cooperatively be drawn back to a reachable visual solution. If you engage with children in a community, you engage the extended family at some point. The primary methodology was to produce a series of educationally valid projects at the Cherbourg State School that had a resonance into that community, then revisit and refine them where necessary and develop a new series that extended all of the positive aspects of them. This was done over a period of five years. The art made during this time is excellent. The children know it, as do their families, staff at the school, members of the local community and the others who have viewed it in exhibitions in far places like Brisbane and Melbourne. This art and the way it has been made has been acknowledged as useful by the children, teachers and the community, in educational and social terms. The school is a better place to be. This has been acknowledged by the children, teachers and the community The art making of the last five years has become an integral part of the way the school now operates and the influence of that has begun to seep into other parts of the community. Art needs to be taken from the margins and put to work at the centre.

Journalism as social networking : the Australian youdecide project and the 2007 federal election

The increasing prevalence of new media technologies and the rise of citizen journalism has coincided with a crisis in industrial journalism –as the figure of the "journalist as hero" is fading, new media forms have facilitated the production of news content "from below" by citizens and "pro-am" journalists. Participation in an action-research project run during the 2007 Australian Federal Election, youdecide 2007, allowed the authors to gain first-hand insights into the progress of citizen-led news media in Australia, but also allowed us to develop an account of what the work of facilitating citizen journalism involves. These insights are important to understanding the future of professional journalism and journalism education, as more mainstream media organizations move to accommodate and harness user-created content. The paper considers the relevance of citizen journalism projects as forms of R&D for understanding news production and distribution in participatory media cultures, and the importance of grounded case studies for moving beyond normative debates about new media and the future of journalism.