376 resultados para Cuttings


Relevância:

10.00% 10.00%

Publicador:

Resumo:

2001

Relevância:

10.00% 10.00%

Publicador:

Resumo:

ABSTRACT: The cassava market within Distrito Federal (DF) presents potencial for expansion, for that reason, it is fundamental that the propagative material for planting (stem cuttings) presents genetic traits that confer high productivity to the crop, resistance against the main diseases and plagues and culinary qualities that fulfill the demands of the consumer market. In order to select varieties which combine the before mentioned interesting caracteristics for the producers and consumers of DF, we carried out experiments to evaluate table cassava type varieties at Núcleo Rural Jardim, DF (year 1999/2000), at an experimental area of Embrapa Cerrados located in the Municipy of Planaltina, DF (year 1999/2000), at Núcleo Rural Ponte Alta, DF (year 2002/2003) and at Brazlândia, DF (year 2003/2004). Among the evaluated varieties, if the parameters productivity, time necessary for cooking and colour of the pulp (which, in the case of DF, must be cream-colour or yellow due to market demands) are collectively considered, the variety Japonesinha / IAC 576-70 / BGMC 753 stands out as it combines high productivity of roots, moderate resistance to bacterial blight, good culinary quality (time necessary for cooking inferior to thirty minutes) and pulp of cream colour. Conclusively, this variety can be recommended to be cultivated at DF.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The development of procedures and media for the micropropagation of B. rex are described. Media for the production of plantlets from a number of other Begonia hybrids are also provided. Growth analysis data is given for plants produced in vivo from leaf cuttings and in vitro from mature leaf petioles and immature leaves derived from singly and multiply recycled axenic plantlets. No significant difference was found in phenotype or quantitative vegetative characters for any of the populations assessed. The results presented from studies on the development of broad spectrum media for the propagation of a number of B. rex cultivars using axenic leaf explants on factorial combinations of hormones illustrate the major influence played by the genotype on explant response in vitro and suggest media on which a range of B. rex cultivars may be propagated. Procedures for in vitro irradiation and colchicine treatments to destabilize the B. rex genome have also been described. Variants produced from these treatments indicate the utility of in vitro procedures for the expression of induced somatic variation. Colour variants produced from irradiation treatment have been cultured and prove stable. Polyploids produced as variants from irradiation treatment have been subcultured but prove unstable. Media for the induction and proliferation of callus are outlined. The influence of callus subculture and aging on the stability of the B. rex genome is assessed by chromosomal analysis of cells, in vitro and in regenerants. The B. rex genome is destabilized in callus culture but attenuation of variation occurs on regeneration. Diploid cell lines are maintained in callus subcultures and supplementation of regenerative media with high cytokinin concentrations, casein hydrolysate or adenine failed to produce variants. Callus aging however resulted in the production of polyploids. The presence and expression of pre-existing somatic variation in B. rex pith and root tissue is assessed and polyploids have been produced from pith tissues cultured in vitro. The stability of the B. rex genome and the application of tissue culture to micropropagation and breeding of B. rex are discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Recent research on the delayed failure of cuttings in clay clearly recognises and predicts progressive delayed failure of deep cuttings. This is due to a combination of strain-softening, weathering, dissipation of negative excess pore water pressure generated at the time of excavation, and frequent occurrence of prolonged periods of wet weather. There have been several slope failures of this kind in Northern Ireland. This paper discusses a case study based on a failure of a deep cutting, excavated at a slope of 1 in 2, on the A1 near Dromore (County Down) in Northern Ireland. The cutting was in lodgement till, a stiff, heavily overconsolidated clay. The failure occurred approximately 30 years after the cutting was excavated, following a prolonged period of heavy rainfall. An analysis of the failure, together with laboratory test data on soil samples taken from the site, confirmed that by using long-term soil strength parameters the factor of safety of this slope was unity. The conclusion of the analysis is that slopes excavated in this soil should be designed (and assessed) on long-term strength parameters.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The stress regime in a cutting (slope) is complex, with different principle stresses acting in different directions along the potential failure plane. For example, stresses may be primarily in extension near the toe and in compression near the crest of a slope. Cuttings in heavily overconsolidated clays are known to be susceptible to progressive failure which usually starts at the toe of the slope. Softening and the development of rupture surfaces have been observed in the field and are well documented for London Clays. However, this failure mechanism is yet to be established for glacial tills. To better understand the progressive failure mechanism, this paper discusses a series of laboratory tests conducted on reconstituted glacial till samples from Northern Ireland. Initial observations indicate that, a soil with insitu stress states between 80-90% of peak strength may undergo significant viscoplastic straining as a result of the combination of pore-pressure cycling and elevated stress level.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Hydrocarbons contamination of the marine environment generated by the offshore oil and gas industry is generated from a number of sources including oil contaminated drill cuttings and produced waters. The removal of hydrocarbons from both these sources is one of the most significant challenges facing this sector as it moves towards zero emissions. The application of a number of techniques which have been used to successfully destroy hydrocarbons in produced water and waste water effluents has previously been reported. This paper reports the application of semiconductor photocatalysis as a final polishing step for the removal of hydrocarbons from two waste effluent sources. Two reactor concepts were considered: a simple flat plate immobilised film unit, and a new rotating drum photocatalytic reactor. Both units proved to be effective in removing residual hydrocarbons from the effluent with the drum reactor reducing the hydrocarbon content by 90% under 10 minutes. 

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Deep-seated progressive failures of cuttings in heavily overconsolidated clays have been observed in the field and are well documented, especially for London Clays (Potts, Kovacevic, & Vaughan, 1997; Smethurst, Powrie, & Clarke, 2006; Take, 2003), however, the process of softening and the development of a rupture surface in other clays, including the clay fraction of glacial tills, is still to be established. Recent decades have witnessed extreme weather conditions in Northern Ireland with dry summers and wet winters. The dynamics of this pore pressure variation can trigger strength reduction and progressive plastic straining, both of which will lead to slope failure. The aim of this research is to evaluate the effect of pore pressure variations on the deformation and long-term stability of large cuttings in glacial tills in Northern Ireland. This paper outlines the overall research program and presents initial laboratory findings (Carse, 2013).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Stiffness values in geotechnical structures can range over many orders of magnitude for relatively small operational strains. The typical strain levels where soil stiffness changes most dramatically is in the range 0.01-0.1%, however soils do not exhibit linear stress-strain behaviour at small strains. Knowledge of the in situ stiffness at small strain is important in geotechnical numerical modelling and design. The stress-strain regime of cut slopes is complex, as we have different principle stress directions at different positions along the potential failure plane. For example, loading may be primarily in extension near the toe of the slope, while compressive loading is predominant at the crest of a slope. Cuttings in heavily overconsolidated clays are known to be susceptible to progressive failure and subsequent strain softening, in which progressive yielding propagates from the toe towards the crest of the slope over time. In order to gain a better understanding of the rate of softening it would be advantageous to measure changes in small strain stiffness in the field.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The UK’s transportation network is supported by critical geotechnical assets (cuttings/embankments/dams) that require sustainable, cost-effective management, while maintaining an appropriate service level to meet social, economic, and environmental needs. Recent effects of extreme weather on these geotechnical assets have highlighted their vulnerability to climate variations. We have assessed the potential of surface wave data to portray the climate-related variations in mechanical properties of a clay-filled railway embankment. Seismic data were acquired bimonthly from July 2013 to November 2014 along the crest of a heritage railway embankment in southwest England. For each acquisition, the collected data were first processed to obtain a set of Rayleigh-wave dispersion and attenuation curves, referenced to the same spatial locations. These data were then analyzed to identify a coherent trend in their spatial and temporal variability. The relevance of the observed temporal variations was also verified with respect to the experimental data uncertainties. Finally, the surface wave dispersion data sets were inverted to reconstruct a time-lapse model of S-wave velocity for the embankment structure, using a least-squares laterally constrained inversion scheme. A key point of the inversion process was constituted by the estimation of a suitable initial model and the selection of adequate levels of spatial regularization. The initial model and the strength of spatial smoothing were then kept constant throughout the processing of all available data sets to ensure homogeneity of the procedure and comparability among the obtained VS sections. A continuous and coherent temporal pattern of surface wave data, and consequently of the reconstructed VS models, was identified. This pattern is related to the seasonal distribution of precipitation and soil water content measured on site.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A significant portion of the UK’s transportation system relies on a network of geotechnical earthworks (cuttings and embankments) that were constructed more than 100 years ago, whose stability is affected by the change in precipitation patterns experienced over the past few decades. The vulnerability of these structures requires a reliable, cost- and time-effective monitoring of their geomechanical condition. We have assessed the potential application of P-wave refraction for tracking the seasonal variations of seismic properties within an aged clay-filled railway embankment, located in southwest England. Seismic data were acquired repeatedly along the crest of the earthwork at regular time intervals, for a total period of 16 months. P-wave first-break times were picked from all available recorded traces, to obtain a set of hodocrones referenced to the same spatial locations, for various dates along the surveyed period of time. Traveltimes extracted from each acquisition were then compared to track the pattern of their temporal variability. The relevance of such variations over time was compared with the data experimental uncertainty. The multiple set of hodocrones was subsequently inverted using a tomographic approach, to retrieve a time-lapse model of VPVP for the embankment structure. To directly compare the reconstructed VPVP sections, identical initial models and spatial regularization were used for the inversion of all available data sets. A consistent temporal trend for P-wave traveltimes, and consequently for the reconstructed VPVP models, was identified. This pattern could be related to the seasonal distribution of precipitation and soil-water content measured on site.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A large archive of sources for the RDS classical music recitals is extant in the Society’s Library, Ballsbridge, Dublin. The recitals were established in 1886 for the promotion of chamber music and in order to expose Dublin audiences to the works of the great composers. Extant in the collection are minute books; autographed programmes; newspaper cuttings which include previews, reviews and advertisements; correspondences with artists and agents; promotional material; selections of photographs; records of attendance, artists fees and takings; and volumes of printed music.
This paper will document the organisation, management and occurrence of the RDS classical music recitals for the period 1925 to 1950 and will encompass the opening of the current concert hall (The Members’ Hall, 1925), the Society’s bi-centenary celebrations (1931) and the continuance of the recitals within the context of the Second World War (1939- 45). The paper will examine and analyse the following: networks, repertoire and reception.
The RDS music committee established significant links with many performers and UK-based classical music agents. Recitalists include musicians of international renown; Myra Hess, Isolde Menges, Lili Kraus, Joseph Szigeti, Leon Goossens, Sir Hamilton Harty and The Hallé Orchestra, The Catterall Quartet and many local, Dublin-based musicians; Raidió Éireann Orchestra, Dublin String Orchestra, Dublin Philharmonic Orchestra and Culwick Choral Society. The compromises and collaborations in evidence between the music committee, agents and performers resulted in the presentation of varied and well-balanced programmes featuring sonatas, quartets, trios, concerti, overtures, symphonies and songs by composers including Beethoven, Mozart, Haydn and Brahms. Works by contemporary composers including Bax, Dohnanyi, Szymanowski and Suk were also regularly performed, as were works with an Irish influence or flavour. Audiences mainly consisted of members of the Society, music students were encouraged to attend at a reduced rate and reviews were regularly published in the Irish Times, Irish Independent and Irish Press.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cuttings in heavily overconsolidated clays are known to be susceptible to progressive deformation caused by creep and fatigue that usually begins at the toe of the slope. The progressive deformation leads to strength reduction with time at constant stress (or called softening) and could be accelerated by fluctuation of groundwater level associated with more extreme rainfall events predicted through climate change. The purpose of this paper is to assess the mechanism of progressive deformation due to creep and fatigue using element testing on samples of till. The samples were subjected to fully drained loading and the deviator stresses were held constant at various percentages of peak failure stress, while the pore water pressure was kept static or dynamic (fluctuating ±5 kPa) over a period of time. The results have shown that the samples experienced significant deformation even at a higher factor of safety (i.e. the failure deviator stress/deviator stress at which the pore water pressure was fluctuated) under pore water pressure dynamics.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O presente estudo centra‐se na conceptualização de pormenor do modelo de circulação do aquífero termomineral de Chaves na sua zona de descarga no campo hidromineral e geotérmico de Chaves (Norte de Portugal). Para tal, utilizam‐se as informações resultantes da bibliografia disponível, da construção das captações de água termomineral AC1 e AC2, já existentes, e, principalmente, as informações obtidas a partir dos trabalhos de pesquisa, prospecção e construção da captação CC3, obra desenvolvida no ano de 2014 para reforço de caudal das Caldas de Chaves. Incidindo fundamentalmente na análise de perfis geofísicos, de parâmetros de perfuração, “cuttings” e diagrafias diferidas inerentes à sondagem de pesquisa CC3, e da sua posterior transformação em captação, integrando‐se posteriormente toda a informação daí resultante, o estudo culmina na apresentação de um modelo conceptual de pormenor para a circulação de águas tipo “Chaves” na zona de descarga que permite, com considerável robustez, à luz dos dados conhecidos à presente data, o melhor conhecimento do aquífero para futuros projectos de desenvolvimento dos recursos hidrominerais e geotérmicos de Chaves.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Lini Richarda Grol was originally born in Nijmegen, Netherlands in 1913 and immigrated to Canada in 1954 after working as a nurse in South America for three years from 1951 to 1954. She was granted her first Canadian passport in 1961 and worked full-time as nurse at the Welland County Hospital. While nursing she would enroll in writing courses at McMaster University and Ryerson Polytechnical Institute, now Ryerson University. Eventually she decided to dedicate herself to her writing and artwork and began to only work as a nurse part-time and then later opened the Fonthill Studio to devote herself to her writing and artwork full-time. Her status as an immigrant and career as a nurse provided inspiration for much of her writing and she frequently tackles the experience of the female immigrant in her works. Her first publication was in 1938 in a small literary and women’s magazines in Holland and Belgium and her first work of poetry was entitled Stive Gedachten. None of these publications exist in this archive. Her most well-known publication, Liberation, centers around her experiences leading up to and after the liberation of Holland during World War II. Grol was, and continues to be a prolific writer in the Niagara Region and has been published in the Welland Tribune, Pelham Herald, Thorold News, Parent Magazine, Dunville Chronicle, and various Christian publications and literary newsletters and journals. Grol also started her own poetry magazine entitled Canadian Poets Pen Club to help aspiring writers get published. Perhaps her most recognized achievement was the inclusion of one of her poems and the recognition of her novel Liberation into the Thank You Canada Day celebration in May 1970. Grol participated in many local writers’ groups such as the Welland Writer’s Club, and the Canadian Author’s Association. Grol was membership secretary for the Canadian Author’s Association in 1984. She also founded a writer’s club in 1995 in her retirement home, Holland Christian Homes where members meet to talk about their poems and short stories either in English or Dutch. Participating in and creating a writers’ community is integral to Grol’s identity as an author and can be related to the feelings of isolation she felt as an immigrant to Canada. Grol also hosted her own television shows entitled Discovery with Lini Grol which featured guests, usually local artists and writers, and Holland en Hollanders a cultural program for Dutch immigrants. Grol’s most recent activities include the publication of a one act play entitled Peppermint Problems [1996] and a short story entitled “When our War started in Rotterdam” [2004]. In 1994, she moved to Brampton, Ontario into a Christian retirement center called Holland Christian Homes. For further biographical information about Grol see two books contained within this collection Women of Action [1976] and Something About the Author [1976].