Vergleichende computergestützte funktionsmorphologische Analyse an Molaren cercopithecoider Primaten

Die Analyse funktioneller Zusammenhänge zwischen Ernährung und Zahnmorphologie ist ein wichtiger Aspekt primatologischer und paläontologischer Forschung. Als überdauernder Teil des Verdauungssystems geben Zähne die bestmöglichen Hinweise auf die Ernährungsstrategien (ausgestorbener) Arten und eine Fülle weiterer Informationen. Aufgrund dessen ist es für die wissenschaftliche Arbeit von größter Bedeutung, die Zähne so detailliert und exakt wie möglich in ihrer gesamten Struktur zu erfassen. Bisher wurden zumeist zweidimensionale Parameter verwendet, um die komplexe Kronenmorphologie von Primatenmolaren vergleichend zu untersuchen. Die vorliegende Arbeit hatte das Ziel, Zähne verschiedener Arten von Altweltaffen mittels computerbasierter Methoden dreidimensional zu erfassen und neue Parameter zu definieren, mit denen die Form dieser Zähne objektiv erfasst und funktionell interpretiert werden kann. Mit einem Oberflächen-Scanner wurden die Gebisse einer Stichprobe von insgesamt 48 Primaten von fünf verschiedenen Arten eingescannt und mit Bildverarbeitungsmethoden so bearbeitet, dass dreidimensionale digitale Modelle einzelner Backenzähne zur Analyse vorlagen. Es wurden dabei sowohl Arten ausgewählt, die eine für ihre Gattung typische Ernährungsweise besitzen - also Frugivorie bei den Cercopithecinen und Folivorie bei den Colobinen - als auch solche, die eine davon abweichende Alimentation bevorzugen. Alle Altweltaffen haben sehr ähnliche Molaren. Colobinen haben jedoch höhere und spitzere Zahnhöcker, dünneren Zahnschmelz und scheinen ihre Zähne weniger stark abzukauen als die Meerkatzen. Diese Beobachtungen konnten mit Hilfe der neuen Parameter quantifiziert werden. Aus der 3D-Oberfläche und der Grundfläche der Zähne wurde ein Index gebildet, der die Stärke des Oberflächenreliefs angibt. Dieser Index hat bei Colobinen deutlich höhere Werte als bei Cercopithecinen, auch bei Zähnen, die schon stark abgekaut sind. Die Steilheit der Höcker und ihre Ausrichtung wurden außerdem gemessen. Auch diese Winkelmessungen bestätigten das Bild. Je höher der Blätteranteil an der Ernährung ist, desto höher sind die Indexwerte und umso steiler sind die Höcker. Besonders wichtig war es, dies auch für abgekaute Zähne zu bestätigen, die bisher nicht in funktionelle Analysen miteinbezogen wurden. Die Ausrichtung der Höckerseiten gibt Hinweise auf die Kaubewegung, die zum effizienten Zerkleinern der Nahrung notwendig ist. Die Ausrichtung der Höcker der Colobinen deutet darauf hin, dass diese Primaten flache, gleitende Kaubewegungen machen, bei denen die hohen Höcker aneinander vorbei scheren. Dies ist sinnvoll zum Zerschneiden von faserreicher Nahrung wie Blättern. Cercopithecinen scheinen ihre Backenzähne eher wie Mörser und Stößel zu verwenden, um Früchte und Samen zu zerquetschen und zu zermahlen. Je nachdem, was neben der hauptsächlichen Nahrung noch gekaut wird, unterscheiden sich die Arten graduell. Anders als bisher vermutet wurde, konnte gezeigt werden, dass Colobinen trotz des dünnen Zahnschmelzes ihre Zähne weniger stark abkauen und weniger Dentin freigelegt wird. Dies gibt eindeutige Hinweise auf die Unterschiede in der mechanischen Belastung, die während des Kauvorgangs auf die Zähne wirkt, und lässt sich gut mit der Ernährung der Arten in Zusammenhang bringen. Anhand dieser modellhaften Beobachtungen können in Zukunft ausgestorbene Arten hinsichtlich ihrer Ernährungsweise mit 3D-Techniken untersucht werden.

Removal of enamel caries with an air abrasion powder

This study compared the efficiency of air abrasion on enamel caries with selective enamel powder (SEP) or with alumina powder and a negative and positive control group. Ninety-three extracted molars with non-cavitated incipient enamel lesions were selected. After embedding the roots in resin, each lesion was sectioned perpendicular to the surface and photographed. Each lesion was classified microscopically as having or not having dentin involvement. The lesions were distributed into four groups with an equal number of enamel caries with or without dentin involvement. Each group was treated differently: Group 1 had SEP abrasion, Group 2 had alumina abrasion, Group 3 had sodium bicarbonate abrasion (negative control) and Group 4 had bur treatment (positive control). The surface was rephotographed after treatment. Superimposition of the photographs identified areas of "correct-excavation," "under-excavation" and "over-excavation." There were no statistical differences between lesions treated with or without dentin involvement for Groups 2 through 4. However, in the SEP group, all measured areas were significantly influenced by dentin involvement. In pairwise comparisons, no statistical differences were found between the alumina and bur groups. The SEP group, however, showed statistically significant differences for each area compared to the alumina group in enamel caries without dentin involvement. SEP performed as well as alumina and bur in lesions with dentin involvement. SEP is different in its ablative properties toward caries with dentin involvement or no dentin involvement. In terms of dental treatment, SEP seems to have a diagnostic potential for enamel lesions before operative intervention in patients with high caries risk.

Identification of a fibronectin interaction site in the extracellular matrix protein ameloblastin

Mammalian teeth are composed of hydroxyapatite crystals that are embedded in a rich extracellular matrix. This matrix is produced by only two cell types, the mesenchymal odontoblasts and the ectodermal ameloblasts. Ameloblasts secrete the enamel proteins amelogenin, ameloblastin, enamelin and amelotin. Odontoblasts secrete collagen type I and several calcium-binding phosphoproteins including dentin sialophosphoprotein, dentin matrix protein, bone sialoprotein and osteopontin. The latter four proteins have recently been grouped in the family of the SIBLINGs (small integrin-binding ligand, N-linked glycoproteins) because they display similar gene structures and because they contain an RGD tripeptide sequence that binds to integrin receptors and thus mediates cell adhesion. We have prepared all the other tooth-specific proteins in recombinant form and examined whether they might also promote cell adhesion similar to the SIBLINGs. We found that only ameloblastin consistently mediated adhesion of osteoblastic and fibroblastic cells to plastic or titanium surfaces. The activity was dependent on the intact three-dimensional structure of ameloblastin and required de novo protein synthesis of the adhering cells. By deletion analysis and in vitro mutagenesis, the active site could be narrowed down to a sequence of 13 amino acid residues (VPIMDFADPQFPT) derived from exon 7 of the rat ameloblastin gene or exons 7-9 of the human gene. Kinetic studies and RNA interference experiments further demonstrated that this sequence does not directly bind to a cell surface receptor but that it interacts with cellular fibronectin, which in turn binds to integrin receptors. The identification of a fibronectin-binding domain in ameloblastin might permit interesting applications for dental implantology. Implants could be coated with peptides containing the active sequence, which in turn would recruit fibronectin from the patient's blood. The recruited fibronectin should then promote cell adhesion on the implant surface, thereby accelerating osseointegration of the implant.

Fluoride in dental erosion

Dental erosion develops through chronic exposure to extrinsic/intrinsic acids with a low pH. Enamel erosion is characterized by a centripetal dissolution leaving a small demineralized zone behind. In contrast, erosive demineralization in dentin is more complex as the acid-induced mineral dissolution leads to the exposure of collagenous organic matrix, which hampers ion diffusion and, thus, reduces further progression of the lesion. Topical fluoridation inducing the formation of a protective layer on dental hard tissue, which is composed of CaF(2) (in case of conventional fluorides like amine fluoride or sodium fluoride) or of metal-rich surface precipitates (in case of titanium tetrafluoride or tin-containing fluoride products), appears to be most effective on enamel. In dentin, the preventive effect of fluorides is highly dependent on the presence of the organic matrix. In situ studies have shown a higher protective potential of fluoride in enamel compared to dentin, probably as the organic matrix is affected by enzymatical and chemical degradation as well as by abrasive influences in the clinical situation. There is convincing evidence that fluoride, in general, can strengthen teeth against erosive acid damage, and high-concentration fluoride agents and/or frequent applications are considered potentially effective approaches in preventing dental erosion. The use of tin-containing fluoride products might provide the best approach for effective prevention of dental erosion. Further properly designed in situ or clinical studies are recommended in order to better understand the relative differences in performance of the various fluoride agents and formulations.

In situ and in vitro comparison of laser fluorescence with visual inspection in detecting occlusal caries lesions

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D(1) threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D(1) and D(2) (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D(1) and D(2)) and accuracy (at D(1)) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D(1) and D(2)), specificity and accuracy (both at D(1)) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.

The influence of toothbrushing and coffee staining on different composite surface coatings

The aim of our study is to evaluate the performance of surface sealants and conventional polishing after ageing procedures. Eighty circular composite restorations were performed on extracted human molars. After standardised roughening, the restorations were either sealed with one of three surface sealants (Lasting Touch (LT), BisCover LV (BC), G-Coat Plus (GP) or a dentin adhesive Heliobond (HB)) or were manually polished with silicon polishers (MP) (n = 16). The average roughness (Ra) and colourimetric parameters (CP) (L*a*b*) were evaluated. The specimens underwent an artificial ageing process by thermocycling, staining (coffee) and abrasive (toothbrushing) procedures. After each ageing step, Ra and CP measurements were repeated. A qualitative surface analysis was performed with SEM. The differences between the test groups regarding Ra and CP values were analysed with nonparametric ANOVA analysis (α = 0.05). The lowest Ra values were achieved with HB. BC and GP resulted in Ra values below 0.2 μm (clinically relevant threshold), whereas LT and MP sometimes led to higher Ra values. LT showed a significantly higher discolouration after the first coffee staining, but this was normalised to the other groups after toothbrushing. The differences between the measurements and test groups for Ra and CP were statistically significant. However, the final colour difference showed no statistical difference among the five groups. SEM evaluation showed clear alterations after ageing in all coating groups. Surface sealants and dentin adhesives have the potential to reduce surface roughness but tend to debond over time. Surface sealants can only be recommended for polishing provisional restorations.