The BACOMA cod-end. History and recent developments in BACOMA cod-end regulations and a proposal for abetter specification of the BACOMA cod-end for Baltic Sea cod fishery

To improve the cod stocks in the Baltic Sea, a number of regulations have recently been established by the International Baltic Sea Fisheries Commission (IBSFC) and the European Commission. According to these, fishermen are obliged to use nets with escape windows (BACOMA nets) with a mesh size of the escape window of 120 mm until end of September 2003. These nets however, retain only fish much larger than the legal minimum landing size would al-low. Due to the present stock structure only few of such large fish are however existent. As a consequence fishermen use a legal alternative net. This is a conventional trawl with a cod-end of 130 mm diamond-shaped meshes (IBSFC-rules of 1st April 2002), to be increased to 140 mm on 1st September 2003, according to the mentioned IBSFC-rule. Due legal alterations of the net by the fishermen (e.g. use of extra stiff net material) these nets have acquired extremely low selective properties, i. e. they catch very small fish and produce great amounts of discards. Due to the increase of the minimum landing size from 35 to 38 cm for cod in the Baltic, the amount of discards has even increased since the beginning of 2003. Experiments have now been carried out with the BACOMAnet on German and Swedish commercial and research vessels since arguments were brought forward that the BACOMA net was not yet sufficiently tested on commercial vessels. The results of all experiments conducted so far, are compiled and evaluated here. As a result of the Swedish, Danish and German initiative and research the European Commission reacted upon this in June 2003 and rejected the increase of the diamond-meshed non-BACOMA net from 130 mm to 140mm in September 2003. To protect the cod stocks in the Baltic Sea more effectively the use of traditional diamond meshed cod-ends with-out escape window are prohibited in community waters without derogation, becoming effective 1st of September 2003. To enable more effective and simplified control of the bottom trawl fishery in the Baltic Sea the principle of a ”One-Net-Rule“ is enforced. This is going to be the BACOMA net, with the meshes of the escape window being 110 mm for the time being. The description of the BACOMA net as given in the IBSFC-rules no.10 (revision of the 28th session, Berlin 2002) concentrates on the cod-end and the escape window but only to a less extent on the design and mesh-composition of the remaining parts of the net, such as belly and funnel and many details. Thus, the present description is not complete and leaves, according to fishermen, ample opportunity for manipulation. An initiative has been started in Germany with joint effort from scientists and the fishery to better describe the entire net and to produce a proposal for a more comprehensive description, leaving less space for manipulation. A proposal in this direction is given here and shall be seen as a starting point for a discussion and development towards an internationally uniform net, which is agreed amongst the fishery, scientists and politicians. The Baltic Sea fishery is invited to comment on this proposal, and recommendations for further improvement and specifications are welcomed. Once the design is agreed by the Baltic Fishermen Association, it shall be proposed to the IBSFC and European Commission via the Baltic Fishermen Association.

Recent Developments in In Situ Nutrient Sensors: applications and future directions, Savannah, Georgia, December 11-13, 2006: workshop proceedings

The Alliance for Coastal Technologies (ACT) convened a Workshop on "Recent Developments in In Situ Nutrient Sensors: Applications and Future Directions" from 11-13 December, 2006. The workshop was held at the Georgia Coastal Center in Savannah, Georgia, with local coordination provided by the ACT partner at the Skidaway Institute of Oceanography (University System of Georgia). Since its formation in 2000, ACT partners have been conducting workshops on various sensor technologies and supporting infrastructure for sensor systems. This was the first workshop to revisit a topic area addressed previously by ACT. An earlier workshop on the "State of Technology in the Development and Application of Nutrient Sensors" was held in Savannah, Georgia from 10-12 March, 2003. Participants in the first workshop included representatives from management, industry, and research sectors. Among the topics addressed at the first workshop were characteristics of "ideal" in situ nutrient sensors, particularly with regard to applications in coastal marine waters. In contrast, the present workshop focused on the existing commercial solutions. The in situ nutrient sensor technologies that appear likely to remain the dominant commercial options for the next decade are reagent-based in situ auto-analyzers (or fluidics systems) and an optical approach (spectrophotometric measurement of nitrate). The number of available commercial systems has expanded since 2003, and community support for expanded application and further development of these technologies appears warranted. Application in coastal observing systems, including freshwater as well as estuarine and marine environments, was a focus of the present workshop. This included discussion of possible refinements for sustained deployments as part of integrated instrument packages and means to better promote broader use of nutrient sensors in observing system and management applications. The present workshop also made a number of specific recommendations concerning plans for a demonstration of in situ nutrient sensor technologies that ACT will be conducting in coordination with sensor manufacturers.[PDF contains 40 pages]

Technologies for Measuring Currents in Coastal Environments, Portland, Maine, October 26-28, 2005:workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop entitled "Technologies for Measuring Currents in Coastal Environments" was held in Portland, Maine, October 26-28, 2005, with sponsorship by the Gulf of Maine Ocean Observing System (GoMOOS), an ACT partner organization. The primary goals of the event were to summarize recent trends in nearshore research and management applications for current meter technologies, identify how current meters can assist coastal managers to fulfill their regulatory and management objectives, and to recommend actions to overcome barriers to use of the technologies. The workshop was attended by 25 participants representing state and federal environmental management agencies, manufacturers of current meter technologies, and researchers from academic institutions and private industry. Common themes that were discussed during the workshop included 1) advantages and limitations of existing current measuring equipment, 2) reliability and ease of use with each instrument type, 3) data decoding and interpretation procedures, and 4) mechanisms to facilitate better training and guidance to a broad user group. Seven key recommendations, which were ranked in order of importance during the last day of the workshop are listed below. 1. Forums should be developed to facilitate the exchange of information among users and industry: a) On-line forums that not only provide information on specific instruments and technologies, but also provide an avenue for the exchange of user experiences with various instruments (i.e. problems encountered, cautions, tips, advantages, etc). (see References for manufacturer websites with links to application and technical forums at end of report) b) Regional training/meetings for operational managers to exchange ideas on methods for measuring currents and evaluating data. c) Organize mini-meetings or tutorial sessions within larger conference venues. 2. A committee of major stakeholders should be convened to develop common standards (similar to the Institute of Electrical and Electronics Engineers (IEEE) committee) that enable users to switch sensors without losing software or display capabilities. (pdf contains 28 pages)

Die Tiefseegarnele Pandalus borealis im Nordostatlantik. Biologie, Bestandssituation und fischereiliche Nutzung

One of the most common decapode in the North Atlantic is the “Northern” or “Pink shrimp” Pandalus borealis (Kröyeri). Due to decreasing fish stocks and catches the shrimp fishery was intensified during most recent years. In the North-East Atlantic, a profitable fishery on this species has been carried out by Norway and USSR/ Russia off Norway, in the Barents Sea and off Spitsbergen for about 30 years. For the first time, Germany started a shrimp fishery with FMV “Hannover” in this area in spring/summer 1999. This article gives information on the biology of Pandalus borealis. A brief description of the problems in stock analyses, stock assessment, and the TACs (Total Allowable Catches) for the entire North Atlantic are given.

Evaluating governance and participatory processes in Natura 2000: lessons learned and guidance for future prospects

In recent years, participatory approaches have been incorporated in decision-making processes as a way to strengthen the bonds between diverse areas of knowledge and social actors in natural resources management and environmental governance. Despite the favourable context, this paradigm shift is still in an early stage within the development of the Natura 2000 in the European Union, the largest network of protected areas in the world. To enhance the full scope of participatory approaches in this context, this article: (i) briefly reviews the role of participatory approaches in environmental governance, (ii) develops a common framework to evaluate such participatory processes in protected area management, (iii) applies this framework to a real case study, and (iv) based on the lessons learned, provides guidance to improve the future governance of Natura 2000 sites.

Investment prospects in the production of the common carp (Cyprinus carpio) fingerlings in freshwater ponds

Since the introduction of Common carp Cyprinus carpio in Oyo State (Nigeria) from Israel in 1964, various local breeding methods have been employed in carp rearing to improve the survival rate at all stages of development during breeding. The physico-chemical parameters of the ponds which were simultaneously investigated for carp rearing in this study includes temperature (t), dissolved oxygen (DO) and hydrogen-ion concentration (pH). However, high rates of water displacement in the breeding ponds were unfavourable to the development of zooplankton which play important role in the food web of C. carpio. The survival rates of 15.88-69.50% and 19.60-33.83% obtained for the egg-hatchling and hatchling-fingerling stages respectively were encouraging. A breeding performance of this magnitude was found to be viable, breaking even in the fourth year. However, an increase in size of this trial project would be more profitable and increase fingerling supply as well as provide employment opportunities. This study thereby provides some baseline information on some local techniques and progress in the propagation of C. carpio and scope for further improvement

Kinetic studies of gas flows

Our recent studies on kinetic behaviors of gas flows are reviewed in this paper. These flows have a wide range of background, but share a common feature that the flow Knudsen number is larger than 0.01. Thus kinetic approaches such as the direct simulation Monte Carlo method are required for their description. In the past few years, we studied several micro/nano-scale flows by developing novel particle simulation approach, and investigated the flows in low-pressure chambers and at high altitude. In addition, the microscopic behaviors of a couple of classical flow problems were analyzed, which shows the potential for kinetic approaches to reveal the microscopic mechanism of gas flows.