Comparison of mechanical behaviour of thin film simulated by discrete dislocation dynamics and continuum crystal plasticity

3D finite element simulations of 9-grain multicrystalline aggregates are performed within the framework of the classical continuum crystal plasticity and discrete dislocation dynamics. The results are processed in a statistical way by ensemble averaging. The comparison is made at three levels: macroscopic stress–strain curves, average stress values per grain, local values of stress and plastic strain. The comparison shows that some similarities are observed in the stress and strain distributions in both simulations approaches. But there are also large discrepancies caused by the discrete nature of plasticity in DDD. The DDD simulations provide higher stress levels in the aggregate due to the small number of dislocation sources and to the stress field induced by individual dislocations.

Enhancing narrative coherence in simulated interviews about child abuse

Purpose – Simulated child interviews, where adults play the role of a child witness for trainee investigative interviewers, are an essential tool used to train investigators to adhere to non-leading, open-ended questions. The aim of this study is to examine whether the use of a training procedure that guides persons playing the role of a child in simulated interviews results in interviewees producing more coherent narratives (measured by the number of story grammar details).

Design/methodology/approach – A total of 80 police officers individually engaged in ten-minute interviews, whereby an untrained (colleague), or trained respondent, played the role of the child interviewee. For each child respondent condition, the interviews varied according to child age (five or eight years).

Findings – As predicted, trained respondents reported a higher proportion of story grammar elements and a lower proportion of contextual information than the untrained respondents, as well as more story grammar elements in response to open-ended questions. However, there were limitations in how well both groups tailored their story grammar to the age of the child they were representing.

Originality/value – These findings demonstrate that our training procedure promotes a more coherent interviewee account, and facilitates a response style that is more reinforcing of open-ended questions.

Control of biodegradation of a Mg alloy in simulated body fluid

Mg alloy AZ31 is an attractive candidate for coronary artery stents, as it possesses excellent biocompatibility in human body and good mechanical properties. However, AZ31 magnesium alloys generally have poor corrosion resistance in the body environment. This paper reports on the early stages of an investigation into the corrosion mechanism and the morphology of corrosion of AZ31 in simulated body fluid (SBF). The investigation will also consider ways of improving corrosion resistance of this alloy in SBF through the use of ionic liquids. The results to date have shown that AZ31 suffers severe localized pitting corrosion in SBF. The pits mainly develop adjacent to the Al-Mn intermetallic second phase in the α matrix. Energy Dispersive X-Ray Spectroscopy results revealed the presence of Mg, O, Ca, and P in the layer of corrosion product. Treatment of the AZ31 alloy prior to corrosion testing in SBF with the ionic liquid trimethyl (butyl) phosphonium diphenyl phosphate (P1444DPP) produced some increase in the corrosion resistance of the alloy.

Investigating glazing system simulated results with real measurements

Over the past decades there has been a great deal of research related to simulation programs that calculate glazing thermal performance. In this study, several glazing systems were designed using VISION 3 (University of Waterloo, 1992) and WINDOW-6 (Lawrence Berkeley National Laboratory, 2010). The systems were fabricated and experimentally tested in-situ for a summer month. It was found that in most cases the predicted results of the glass temperature matched those measured, though slight discrepancies were observed during periods of high solar radiation, particularly for more complex systems and systems with shading devices.

Microstructure evolution and softening processes occurring during annealing of hot deformed Ni-30Fe austenite

The current work investigates the microstructure evolution and softening processes that take place during annealing of an austenitic Ni-30Fe model alloy subjected to hot deformation in the dynamic recrystallization (DRX) regime. The substructure of the deformed matrix grains largely comprised organized microband arrays, though that of the DRX grains consisted of more random, complex subgrain/cell arrangements. This substructure disparity was also reflected by the distinct difference in the mechanism of post-deformation softening taking place during annealing of the deformed matrix and DRX grains. In the former, the recrystallization process took place through nucleation and growth of new grains fully replacing the deformed structure, as expected for the classical static recrystallization (SRX). The corresponding texture was essentially random, in contrast to that of the DRX grains dominated by low Taylor factor components. The microbands originally present within the deformed matrix grains displayed some tendency to disintegrate during annealing, nonetheless, they remained largely preserved even at prolonged holding times. During annealing of the fully DRX microstructure, a novel softening mechanism was revealed. The initial post-dynamic softening stage involved rapid growth of the dynamically formed nuclei and migration of the mobile boundaries in correspondence with the well-established metadynamic recrystallization (MDRX) mechanism. However, in contrast to the deformed matrix, SRX was not observed and the sub-boundaries within DRX grains rapidly disintegrated through dislocation climb and dislocation annihilation, which led to the formation of dislocation-free grains already at short holding times. Consequently, the DRX texture initially became slightly weakened and then remained largely preserved throughout the annealing process.

Morphology evolution during annealing and electrical conductivity of titania nanotube films

Titania nanotube films were produced by anodization of titanium foil. The titania nanotube films were annealed at different temperatures. Morphology evolution, phase transformation and electrical conductivity of the titania nanotubes were studied. Results showed that the nanotube walls became rough, porous and even collapsed after annealed at 400, 500 and 600°C respectively. Titania anatase phase formed after annealed at 400°C; the amount of anatase phase increased as the annealing temperature increased. The conductivity of the nanotube film annealed at 400°C was improved greatly compared with the conductivity of the as-anodized nanotube film. However, the conductivity of the nanotube films annealed at higher temperatures decreased. The effect of the morphology on the electronic conductivity of the titania nanotube films was discussed.

Texture evolution and softening processes in an austenitic Ni-30Fe alloy subjected to hot deformation and subsequent annealing

The current work has investigated the texture development in an austenitic Ni-30Fe model alloy during deformation within the dynamic recrystallization (DRX) regime and after post-deformation annealing. Both the deformed matrix and DRX texture displayed the expected FCC shear components, the latter being dominated by the low Taylor factor grains, which was presumably caused by their lower consumption rate during DRX. The deformed matrix grains were largely characterized by organized, microband structures, while the DRX grains showed more random, complex subgrains/cell arrangements. The latter substructure type proved to be significantly less stable during post-deformation annealing. The recrystallization of the deformed matrix occurred through nucleation and growth of new grains fully replacing the deformed structure, as expected for the classical static recrystallization (SRX). Unlike the DRX grains, the SRX texture was essentially random. By contrast, a novel softening mechanism was revealed during annealing of the fully DRX microstructure. The initial post-dynamic softening stage involved rapid growth of the dynamically formed nuclei and migration of the mobile boundaries in line with the well-established metadynamic recrystallization (MDRX) mechanism, which weakened the starting DRX texture. However, in parallel, the sub-boundaries within the deformed DRX grains progressively disintegrated through dislocation climb and dislocation annihilation, which ultimately led to the formation of dislocation-free grains. Consequently, the weakened DRX texture largely remained preserved throughout the annealing process.

Comparison of functional mobility performance with clinical vision measures in simulated Retinitis Pigmentosa

Simulations of retinitis pigmentosa (RP) under various conditions of retinal illuminance were designed and investigated in order that they might be used in the mobility training of clients with early RP. Goggles incorporating a 2.5 neutral density (ND) filter with a 0.5-mm diameter pinhole were found to be a potentially useful simulation device for this purpose. This investigation also compared mobility performance with clinical vision measures under photopic, mesopic, and scotopic conditions of retinal illuminance. Although none of the clinical vision measures we used was entirely predictive of mobility performance, some measures were better predictors than others. For a severe constriction of the visual field and decreasing retinal illuminance, both edge contrast sensitivity and visual acuity, measured outdoors, accounted for a greater proportion of the variance in mobility performance than did low contrast visual acuity measured under the same circumstances. The same clinical vision measures, taken in-doors, were of no value in predicting outdoor mobility performance.

Cane toad or computer mouse? Real and computer-simulated laboratory exercises in physiology classes

Traditional practical classes in many countries are being rationalised to reduce costs. The challenge for university educators is to provide students with the opportunity to reinforce theoretical concepts by running something other than a traditional practical program. One alternative is to replace wet labs with comparable computer simulations. These virtual experiments involve no harm to animals and require little ongoing expenditure. This study documents second-year physiology students' perceptions of and attitudes to simulations by incorporating several computer simulations into the practical program. Computer simulations met the conceptual and, to some extent, the motivational goals of university practical programs. While students enjoyed both wet labs and computer-simulated exercises, overwhelmingly the wet lab provided the more memorable and stimulating learning experience. Based on this study, students suggested that computer simulations could be effectively used to complement rather than replace practical classes where students gain laboratory skills.