A methodological evaluation and predictive in silico investigation into the multi-functionality of arginine in directly compressed tablets

The acceleration of solid dosage form product development can be facilitated by the inclusion of excipients that exhibit poly-/multi-functionality with reduction of the time invested in multiple excipient optimisations. Because active pharmaceutical ingredients (APIs) and tablet excipients present diverse densification behaviours upon compaction, the involvement of these different powders during compaction makes the compaction process very complicated. The aim of this study was to assess the macrometric characteristics and distribution of surface charges of two powders: indomethacin (IND) and arginine (ARG); and evaluate their impact on the densification properties of the two powders. Response surface modelling (RSM) was employed to predict the effect of two independent variables; Compression pressure (F) and ARG percentage (R) in binary mixtures on the properties of resultant tablets. The study looked at three responses namely; porosity (P), tensile strength (S) and disintegration time (T). Micrometric studies showed that IND had a higher charge density (net charge to mass ratio) when compared to ARG; nonetheless, ARG demonstrated good compaction properties with high plasticity (Y=28.01MPa). Therefore, ARG as filler to IND tablets was associated with better mechanical properties of the tablets (tablet tensile strength (σ) increased from 0.2±0.05N/mm2 to 2.85±0.36N/mm2 upon adding ARG at molar ratio of 8:1 to IND). Moreover, tablets' disintegration time was shortened to reach few seconds in some of the formulations. RSM revealed tablet porosity to be affected by both compression pressure and ARG ratio for IND/ARG physical mixtures (PMs). Conversely, the tensile strength (σ) and disintegration time (T) for the PMs were influenced by the compression pressure, ARG ratio and their interactive term (FR); and a strong correlation was observed between the experimental results and the predicted data for tablet porosity. This work provides clear evidence of the multi-functionality of ARG as filler, binder and disintegrant for directly compressed tablets.

An approach for design and analysis of User-centric Communication Middleware

Today, the development of domain-specific communication applications is both time-consuming and error-prone because the low-level communication services provided by the existing systems and networks are primitive and often heterogeneous. Multimedia communication applications are typically built on top of low-level network abstractions such as TCP/UDP socket, SIP (Session Initiation Protocol) and RTP (Real-time Transport Protocol) APIs. The User-centric Communication Middleware (UCM) is proposed to encapsulate the networking complexity and heterogeneity of basic multimedia and multi-party communication for upper-layer communication applications. And UCM provides a unified user-centric communication service to diverse communication applications ranging from a simple phone call and video conferencing to specialized communication applications like disaster management and telemedicine. It makes it easier to the development of domain-specific communication applications. The UCM abstraction and API is proposed to achieve these goals. The dissertation also tries to integrate the formal method into UCM development process. The formal model is created for UCM using SAM methodology. Some design errors are found during model creation because the formal method forces to give the precise description of UCM. By using the SAM tool, formal UCM model is translated to Promela formula model. In the dissertation, some system properties are defined as temporal logic formulas. These temporal logic formulas are manually translated to promela formulas which are individually integrated with promela formula model of UCM and verified using SPIN tool. Formal analysis used here helps verify the system properties (for example multiparty multimedia protocol) and dig out the bugs of systems.

Linking Old Librarianship to New: Aligning 5-Steps of The Innovator's DNA in Creating Thematic Discovery Systems for the Everglades

This poster presentation from the May 2015 Florida Library Association Conference, along with the Everglades Explorer discovery portal at http://ee.fiu.edu, demonstrates how traditional bibliographic and curatorial principles can be applied to: 1) selection, cross-walking and aggregation of metadata linking end-users to wide-spread digital resources from multiple silos; 2) harvesting of select PDFs, HTML and media for web archiving and access; 3) selection of CMS domains, sub-domains and folders for targeted searching using an API. Choosing content for this discovery portal is comparable to past scholarly practice of creating and publishing subject bibliographies, except metadata and data are housed in relational databases. This new and yet traditional capacity coincides with: Growth of bibliographic utilities (MarcEdit); Evolution of open-source discovery systems (eXtensible Catalog); Development of target-capable web crawling and archiving systems (Archive-it); and specialized search APIs (Google). At the same time, historical and technical changes – specifically the increasing fluidity and re-purposing of syndicated metadata – make this possible. It equally stems from the expansion of freely accessible digitized legacy and born-digital resources. Innovation principles helped frame the process by which the thematic Everglades discovery portal was created at Florida International University. The path -- to providing for more effective searching and co-location of digital scientific, educational and historical material related to the Everglades -- is contextualized through five concepts found within Dyer and Christensen’s “The Innovator’s DNA: Mastering the five skills of disruptive innovators (2011). The project also aligns with Ranganathan’s Laws of Library Science, especially the 4th Law -- to "save the time of the user.”

Cloud Stratus: uma plataforma de middleware para desenvolvimento de aplicações em nuvem

Cloud Computing is a paradigm that enables the access, in a simple and pervasive way, through the network, to shared and configurable computing resources. Such resources can be offered on demand to users in a pay-per-use model. With the advance of this paradigm, a single service offered by a cloud platform might not be enough to meet all the requirements of clients. Ergo, it is needed to compose services provided by different cloud platforms. However, current cloud platforms are not implemented using common standards, each one has its own APIs and development tools, which is a barrier for composing different services. In this context, the Cloud Integrator, a service-oriented middleware platform, provides an environment to facilitate the development and execution of multi-cloud applications. The applications are compositions of services, from different cloud platforms and, represented by abstract workflows. However, Cloud Integrator has some limitations, such as: (i) applications are locally executed; (ii) users cannot specify the application in terms of its inputs and outputs, and; (iii) experienced users cannot directly determine the concrete Web services that will perform the workflow. In order to deal with such limitations, this work proposes Cloud Stratus, a middleware platform that extends Cloud Integrator and offers different ways to specify an application: as an abstract workflow or a complete/partial execution flow. The platform enables the application deployment in cloud virtual machines, so that several users can access it through the Internet. It also supports the access and management of virtual machines in different cloud platforms and provides services monitoring mechanisms and assessment of QoS parameters. Cloud Stratus was validated through a case study that consists of an application that uses different services provided by different cloud platforms. Cloud Stratus was also evaluated through computing experiments that analyze the performance of its processes.

Distribution, density and abundance of Antarctic ice seals off Queen Maud Land and the eastern Weddell Sea

The Antarctic Pack Ice Seal (APIS) Program was initiated in 1994 to estimate the abundance of four species of Antarctic phocids: the crabeater seal Lobodon carcinophaga, Weddell seal Leptonychotes weddellii, Ross seal Ommatophoca rossii and leopard seal Hydrurga leptonyx and to identify ecological relationships and habitat use patterns. The Atlantic sector of the Southern Ocean (the eastern sector of the Weddell Sea) was surveyed by research teams from Germany, Norway and South Africa using a range of aerial methods over five austral summers between 1996-1997 and 2000-2001. We used these observations to model densities of seals in the area, taking into account haul-out probabilities, survey-specific sighting probabilities and covariates derived from satellite-based ice concentrations and bathymetry. These models predicted the total abundance over the area bounded by the surveys (30°W and 10°E). In this sector of the coast, we estimated seal abundances of: 514 (95 % CI 337-886) x 10**3 crabeater seals, 60.0 (43.2-94.4) x 10**3 Weddell seals and 13.2 (5.50-39.7) x 10**3 leopard seals. The crabeater seal densities, approximately 14,000 seals per degree longitude, are similar to estimates obtained by surveys in the Pacific and Indian sectors by other APIS researchers. Very few Ross seals were observed (24 total), leading to a conservative estimate of 830 (119-2894) individuals over the study area. These results provide an important baseline against which to compare future changes in seal distribution and abundance.

Almetrics: measuring the influence of the media on the social impact of research

Social media is changing the way we interact, present ideas and information and judge the quality of content and contributions. In recent years there have been hundreds of platforms to freely share all kinds of information and connect across networks. These new tools generate activity statistics and interactions among users such as mentions, retweets, conversations, comments on blogs or Facebook; managers references showing popularity ratings of more references shared by other researchers or repositories that generate statistics of visits or downloads of articles. This paper analyzes that have meaning and implications altmetrics, what are its advantages and critical platforms (Almetric.com, ImpactStory, Plos altmetrics, PlumX), reports progress and benefits for authors, publishers and librarians. It concluded that the value of alternative metrics as a complementary tool citation analysis is evident, although it is suggested that you should dig deeper into this issue to unravel the meaning and the potential value of these indicators to assess their potential.

El surgimiento de HTML5; un nuevo paradigma en los estándares Web

Gracias al crecimiento, expansión y popularización de la World Wide Web, su desarrollo tecnológico tiene una creciente importancia en la sociedad. La simbiosis que protagonizan estos dos entornos ha propiciado una mayor influencia social en las innovaciones de la plataforma y un enfoque mucho más práctico. Nuestro objetivo en este artículo es describir, caracterizar y analizar el surgimiento y difusión del nuevo estándar de hipertexto que rige la Web; HTML5. Al mismo tiempo exploramos este proceso a la luz de varias teorías que aúnan tecnología y sociedad. Dedicamos especial atención a los usuarios de la World Wide Web y al uso genérico que realizan de los Medios Sociales o "Social Media". Sugerimos que el desarrollo de los estándares web está influenciado por el uso cotidiano de este nuevo tipo de tecnologías y aplicaciones. 

Proposition de nouvelles fonctionnalités WikiSIG pour supporter le travail collaboratif en Geodesign

L’émergence du Web 2.0 se matérialise par de nouvelles technologies (API, Ajax…), de nouvelles pratiques (mashup, geotagging…) et de nouveaux outils (wiki, blog…). Il repose principalement sur le principe de participation et de collaboration. Dans cette dynamique, le Web à caractère spatial et cartographique c’est-à-dire, le Web géospatial (ou GéoWeb) connait lui aussi de fortes transformations technologiques et sociales. Le GéoWeb 2.0 participatif se matérialise en particulier par des mashups entre wikis et géobrowsers (ArgooMap, Geowiki, WikiMapia, etc.). Les nouvelles applications nées de ces mashups évoluent vers des formes plus interactives d’intelligence collective. Mais ces applications ne prennent pas en compte les spécificités du travail collaboratif, en particulier la gestion de traçabilité ou l’accès dynamique à l’historique des contributions. Le Geodesign est un nouveau domaine fruit de l’association des SIG et du design, permettant à une équipe multidisciplinaire de travailler ensemble. Compte tenu de son caractère émergent, le Geodesign n’est pas assez défini et il requiert une base théorique innovante, de nouveaux outils, supports, technologies et pratiques afin de s’adapter à ses exigences complexes. Nous proposons dans cette thèse de nouvelles fonctionnalités de type WikiSIG, bâties sur les principes et technologies du GéoWeb 2.0 et visant en particulier à supporter la dimension collaborative du processus de Geodesign. Le WikiSIG est doté de fonctionnalités wiki dédiées à la donnée géospatiale (y compris dans sa composante géométrique : forme et localisation) permettant d’assurer, de manière dynamique, la gestion documentée des versions des objets et l’accès à ces versions (et de leurs métadonnées), facilitant ainsi le travail collaboratif en Geodesign. Nous proposons également la deltification qui consiste en la capacité de comparer et d’afficher les différences entre deux versions de projets. Finalement la pertinence de quelques outils du géotraitement et « sketching » est évoquée. Les principales contributions de cette thèse sont d’une part d’identifier les besoins, les exigences et les contraintes du processus de Geodesign collaboratif, et d’autre part de proposer des nouvelles fonctionnalités WikiSIG répondant au mieux à la dimension collaborative du processus. Pour ce faire, un cadre théorique est dressé où nous avons identifié les exigences du travail collaboratif de Geodesign et proposé certaines fonctionnalités WikiSIG innovantes qui sont par la suite formalisés en diagrammes UML. Une maquette informatique est aussi développée de façon à mettre en oeuvre ces fonctionnalités, lesquelles sont illustrées à partir d’un cas d’étude simulé, traité comme preuve du concept. La pertinence de ces fonctionnalités développées proposées est finalement validée par des experts à travers un questionnaire et des entrevues. En résumé, nous montrons dans cette thèse l’importance de la gestion de la traçabilité et comment accéder dynamiquement à l’historique dans un processus de Geodesign. Nous proposons aussi d’autres fonctionnalités comme la deltification, le volet multimédia supportant l’argumentation, les paramètres qualifiant les données produites, et la prise de décision collective par consensus, etc.

Implementación de una API para la interacción del guante P5 con entornos de realidad virtual desarrollados en Java y Java 3D

Este artículo presenta el proceso de implementación de una API (Application Programming Interface) que permite la interacción del guante P5 de Essential Reality1 con un entorno virtual desarrollado en el lenguaje de programación Java y su librería Java 3D.2 Por otra parte, se describe un ejemplo implementado, haciendo uso de la API en cuestión. Con base en este ejemplo se presentan los resultados de la ejecución de pruebas de requerimientos de recursos físicos como la CPU y memoria física. Finalmente, se especifican las conclusiones y resultados obtenidos.

Estudo da atividade biológica de líquidos iónicos baseados em bis-piridínios em bactérias Gram-positivas e Gram-negativas

As resistências aos antibióticos estão a tornar-se um problema de saúde pública, estando a preocupar as várias entidades mundiais. Assim sendo, a descoberta de novas alternativas para combater infeções microbianas é crítica. Os líquidos iónicos (LIs) surgem, neste contexto, como um recurso a ser utilizado na indústria farmacêutica, nomeadamente na síntese de novos antibióticos. LIs demonstram a capacidade de melhorar as características dos ingredientes farmacêuticos ativos (API). No entanto, esta não é apenas a relevância destes compostos: propriedades antimicrobianas também têm sido descritas. LIs combinados com APIs ou LI como um API estão a dar uma nova perspetiva aos antibióticos. Os bis-piridínios estão, agora, a ser alvo de estudos também nesta área. Propriedades antimicrobianas de bis-piridinio têm sido descritas. O objetivo deste estudo foi avaliar a atividade de sais bis-piridínios como antimicrobianos. Os LIs derivados de bis-piridínio foram sintetizados e purificados pelo grupo Luís C. Branco da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa, e usado após a confirmação das estruturas e pureza por ressonância magnética nuclear e espectrometria de massa. As bactérias utilizadas pertencem à coleção de Química e Biomoléculas da ESTSP. Para avaliar a atividade biológica dos compostos foram determinados os valores de concentração mínima inibitória (MIC), pelo método de microdiluição, de acordo com a metodologia do Clinical Laboratory Standards Institute (CLSI). A determinação das taxas de crescimento também foi feita pelo método de microdiluição. Foram estudados 12 LIs contra 9 estirpes bacterianas, muitas das quais resistentes aos antibióticos. Apenas três dos compostos não mostraram nenhuma atividade antimicrobiana para as concentrações estudadas (<5 mM). Dois LIs mostraram atividade biológica contra todas as bactérias estudadas, incluindo o S.aureaus MRSA ATCC 43300. Seis dos sete restantes compostos demonstraram atividade biológica contra a maioria das bactérias estudadas. Só um composto mostrou atividade contra uma única bactéria. Os LIs bis-piridínios têm atividade biológica contra bactérias Gram-positivas e Gram- negativas, incluindo bactérias resistentes. Assim, estes compostos devem ser tidos em conta na busca de novas moléculas antibacterianas (síntese de novos antibióticos ou desinfetantes).

Uma API criptográfica para aplicações embarcadas

This document presents GEmSysC, an unified cryptographic API for embedded systems. Software layers implementing this API can be built over existing libraries, allowing embedded software to access cryptographic functions in a consistent way that does not depend on the underlying library. The API complies to good practices for API design and good practices for embedded software development and took its inspiration from other cryptographic libraries and standards. The main inspiration for creating GEmSysC was the CMSIS-RTOS standard, which defines an unified API for embedded software in an implementation-independent way, but targets operating systems instead of cryptographic functions. GEmSysC is made of a generic core and attachable modules, one for each cryptographic algorithm. This document contains the specification of the core of GEmSysC and three of its modules: AES, RSA and SHA-256. GEmSysC was built targeting embedded systems, but this does not restrict its use only in such systems – after all, embedded systems are just very limited computing devices. As a proof of concept, two implementations of GEmSysC were made. One of them was built over wolfSSL, which is an open source library for embedded systems. The other was built over OpenSSL, which is open source and a de facto standard. Unlike wolfSSL, OpenSSL does not specifically target embedded systems. The implementation built over wolfSSL was evaluated in a Cortex- M3 processor with no operating system while the implementation built over OpenSSL was evaluated on a personal computer with Windows 10 operating system. This document displays test results showing GEmSysC to be simpler than other libraries in some aspects. These results have shown that both implementations incur in little overhead in computation time compared to the cryptographic libraries themselves. The overhead of the implementation has been measured for each cryptographic algorithm and is between around 0% and 0.17% for the implementation over wolfSSL and between 0.03% and 1.40% for the one over OpenSSL. This document also presents the memory costs for each implementation.

Control y procesamiento de vídeo en cámaras IP desde una plataforma Android

La aplicación Control Camera IP, desarrolla como Proyecto Fin de Carrera en la ETS. De Ingeniería Informática de la Universidad de Málaga, fue concebida como una interfaz de usuario para la monitorización y control de cámaras IP de forma remota, pudiendo ésta ejecutarse en diferentes plataformas, incluyendo dispositivos móviles con sistemas Android. En aquel momento sin embargo, las plataformas Android no disponían de una librería oficial dentro del marco de la herramienta de desarrollo utilizada (la biblioteca de desarrollo multiplataforma Qt), por lo que fue utilizada una versión alternativa no oficial denominada Necessitas Qt for Android. Hoy, con la versión 5 de Qt, existe la posibilidad de dar soporte a las plataformas Android de forma oficial, por lo que es posible adaptar la aplicación a esta nueva versión. En este Trabajo Fin de Grado, se ha adaptado la aplicación Control Camera IP a la versión 5 de Qt, logrando así crear plataformas para dispositivos Android de forma oficial. Además, se hace uso de la biblioteca OpenCV para el desarrollo de varios métodos de procesamiento sobre la imagen recibida por la cámara IP, así como algoritmos de detección de movimiento y de caras de personas, haciendo uso de técnicas de visión por computador. Finalmente, se introduce la posibilidad de utilizar APIs estandarizadas para la conectividad de la aplicación con cámaras IP de bajo coste, adaptando algunas de sus funciones a la aplicación Control Camera IP.

Uma arquitetura de referência para o processamento distribuído de stream de dados em soluções analíticas de near real-time

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2015.

O touro na mitologia egípcia : Ápis, cerimónias, insígnias e epítetos reais

Os antigos Egípcios acreditavam que o touro poderoso representava a personalidade do próprio faraó. O touro estava, de facto, intimamente associado ao Estado faraónico, estando presente ao nível dos regalia (cauda taurina) e significativamente nos próprios epítetos reais (ka nakht). Na mitologia egípcia, de todos os touros sagrados o que maior projecção alcançou, como deus agrário da fecundidade, da vegetação renascida e da ressurreição, foi, seguramente, o touro Ápis, associado em Mênfis aos deuses Ptah e Osíris. Na sua condição de touro ágil, vigoroso e viril, Ápis era um intermediário consistente entre o mundo dos vivos e o dos mortos, além de ser um propiciador de fertilidade e renascimento quando associado ao deus-Sol. A sua participação, literalmente ao lado do faraó, na «corrida ritual», importante cerimónia no âmbito da concepção ideológica do poder real, reforçou ainda mais a sua importância no seio do panteão egípcio.