生长素水平以及光敏色素基因表达与水稻生殖生长的关系

第一部分 光敏核不育水稻农垦58S花药IAA的免疫组织化学分析 光周期敏感核不育水稻农垦58S是研究光周期调节花发育作用机理的好材料。在此方面已取得很大进展。有关植物激素的研究已发现长日照诱导农垦58S不育的信号传导环节之一是IAA的亏缺。本文首次应用免疫组织化学分析方法对长日和短日处理后的农垦58S和对照农垦58花药中的IAA进行了定位研究和相对水平的比较。结果表明此方法可反映游离态IAA在花药中的分布及其相对水平的变化。从雌雄蕊原基形成期至单核晚期的五个时期中，经长日照处理的农垦58S花药中的IAA水平都低于短日照处理的农垦58S及在不同光周期处理下的家垦58花药。对花药中生长素的亏缺与育性的关系以及IAA亏缺的原因也进行了讨论。 第二部分 不同水稻品种成花诱导阶段光周期敏感性及光敏色素mRNA丰度的比较 对光敏核不育水稻十多年的研究表明，光敏色素是感受光周期信号调节水稻成花诱导和育性转换的主要光受体。同时还发现光敏核不育基因导入不同遗传背景后，其基因表达条件，如临界光长、光敏温度范围、光温互补作用强弱等都表现明显差异。为了进一步探讨水稻光周期反应的作用机理，了解不同品种遗传背景对光周期信号感受的特点，我们选取籼稻、粳稻、早熟、晚熟共11个品种，比较光照阶段在长同、短同条件下叶片光敏色素B mRNA含量的差异。初步结果表明，光敏色素B的转录不受光调控，在长日、短日处理条件下没有明显差别。在多数品种间光敏色素B表达没有明显差异，说明其与品种感光性、籼粳性无明显相关。只有早熟粳稻铁粳23的光敏色素B mRNA含量较高，是一个例外。实验结果尚需进一步重复。这方面的工作可以为水稻发育光温互作本质的研究积累一些初步资料。

Translocation as a strategy to rehabilitate the queen conch (Strombus gigas) population in the Florida Keys

Queen conch (Strombus gigas) stocks in the Florida Keys once supported commercial and recreational fisheries, but overharvesting has decimated this once abundant snail. Despite a ban on harvesting this species since 1985, the local conch population has not recovered. In addition, previous work has reported that conch located in nearshore Keys waters are incapable of spawning because of poor gonadal condition, although reproduction does occur offshore. Queen conch in other areas undergo ontogenetic migrations from shallow, nearshore sites to offshore habitats, but conch in the Florida Keys are prevented from doing so by Hawk Channel. The present study was initiated to determine the potential of translocating nonspawning nearshore conch to offshore sites in order to augment the spawning stock. We translocated adult conch from two nearshore sites to two offshore sites. Histological examinations at the initiation of this study confirmed that nearshore conch were incapable of reproduction, whereas offshore conch had normal gonads and thus were able to reproduce. The gonads of nearshore females were in worse condition than those of nearshore males. However, the gonadal condition of the translocated nearshore conch improved, and these animals began spawning after three months offshore. This finding suggests that some component of the nearshore environment (e.g., pollutants, temperature extremes, poor food or habitat quality) disrupts reproduction in conch, but that removal of nearshore animals to suitable offshore habitat can restore reproductive viability. These results indicate that translocations are preferable to releasing hatchery-reared juveniles because they are more cost-effective, result in a more rapid increase in reproductive output, and maintain the genetic integrity of the wild stock. Therefore, translocating nearshore conch to offshore spawning aggregations may be the key to expediting the recovery of queen conch stocks in the Florida Keys.

Daily rainfall along the United States Pacific Coast appears to conform to a square-root normal probability distribution

EXTRACT (SEE PDF FOR FULL ABSTRACT): As part of a study of climatic influences on landslide initiation, a statistical analysis of long-term (>40 years) records of daily rainfall from 24 Pacific coastal stations, from San Diego to Cape Flattery, disclosed an unexpected result - the square root of the daily rainfall closely approximates a normal distribution function. ... This paper illustrates the use of the square-root-normal distribution to analyze variations in precipitation along the mainland United States Pacific Coast with examples of orographic enhancement, rain shadows, and increase in precipitation frequency with geographic latitude.

植物克隆性在生态修复中的意义：鄂尔多斯高原赖草和沙鞭的案例

克隆植物通过克隆生长能够很好的适应异质性的生境。在进行植被修复的研究和实践中，注意发扬或引进具有重要资源价值的克隆植物是重要的恢复生态学思考和途径。本文主要应用实验生态学的方法，通过对鄂尔多斯高原不同克隆植物克隆性及其对水分条件的反应的比较，以及对不同克隆植物抵抗风蚀和风蚀坑修复的能力的比较，探讨克隆植物对干旱(水分条件)及风蚀的适应机制，从而对克隆植物的克隆性在生态修复中的意义进行了研究和阐述。 　　对不同水分条件下赖草(Leymus secalinus (Georgi.) Tzvel)和沙鞭(Psammochloa villosa (Trin.) Bor)克隆性的研究表明：克隆生长开始时间和克隆生长率二者与克隆植物新产生子代分株数量之间存在着显著的相关关系，说明克隆生长开始时间和克隆生长率能够作为准确评价克隆性的指标;相对于沙鞭来说，赖草具有更强的克隆性，表现在它的早的克隆生长开始时间、高的克隆生长率，并且这种差异可以被水分条件所修饰;植物的克隆性对水分条件具有较强的可塑性，这种可塑性具有种间差异。相对赖草来说，沙鞭能更好地适应干旱条件。 　　克隆植物植株有两种繁殖体类型，分株和种子。本研究对分别从分株来源和种子来源的赖草与沙鞭植株在不同水分条件下生长状况及克隆性进行了比较，结果表明：水分的增加，有利于赖草的生长;而对于沙鞭来说，水分抑制了分株来源的沙鞭植株的生长，但对种子来源的沙鞭植株的生长有着促进作用。克隆植物的克隆性在水分条件较好的情况下能够得到更好的表达。不同来源有赖草植株之间克隆性没有明显差异;对于沙鞭来说，分株来源的沙鞭植株克隆性受水分条件的影响不明显，但水分有利于种子来源的沙鞭植株克隆性的表达。说明不同繁殖体类型来源的植株，克隆性对水分的反应格局存在着一定的差异。分株来源的沙鞭植株对干旱条件具有比种子来源的植株更强的适应性。 　　通过对沙鞭和赖草实生幼苗在不同风蚀程度下生长状况的比较，结果表明二者幼苗在抵抗风蚀时采取不同的策略。风蚀显著降低了赖草产生新生分株的能力，而对沙鞭潜在分株数没有显著影响。赖草实生幼苗生长状况在轻中度风蚀条件下与对照处理没有显著差异，说明对风蚀具有较强的抵抗能力，其策略可能是风险分担，赖草具有的强克隆性使之能快速产生新的子代分株，从而分担了风蚀造成的风险;沙鞭实生幼苗的生长状况受风蚀影响较为明显，但风蚀没有能对其产生潜在分株(芽)的能力产生显著的影响，说明沙鞭实生幼苗对风蚀可能采取的是通过芽的产生贮存资源、逃避风险、等待机会的策略。赖草和沙鞭对风蚀所采用的不同适应策略，可能会影响到二者在自然条件下种群更新方式的选择。 　　为了探讨克隆植物对风蚀坑修复能力及机理，研究了沙鞭和赖草对种群内风蚀坑的修复过程，结果表明：合轴型克隆草本赖草具有比单轴型克隆草本沙鞭更强的植被修复能力，能够在风蚀坑中产生更多的新生分株，这主要归功于赖草的强克隆性，而赖草间隔子的可塑性反应也有利于将更多的新生分株放置在风蚀坑内。二者进行植被修复的机理有所差异，赖草对风蚀坑的修复主要是通过周围根茎扩展进入坑中，然后产生新的分株;而沙鞭不仅可以通过周边根茎进入产生新的分株，同时也可以通过刺激深层休眠芽来产生新的分株。二者都能在风蚀坑中产生比自然条件下更多的分株，以更好利用风蚀坑中充足的光照;但同时这些分株的生长也受到风蚀坑中养分条件的制约，生物量和生长状况都不如自然条件下形成的分株。 　　 　　

棉纤维发育相关基因的克隆和鉴定

棉纤维是棉花子房内的胚珠外珠被上的一种单细胞表皮毛.为了解胚珠表皮细胞发育启动为棉纤维的分子控制机制,我们用同源克隆的方法,从棉纤维发育早期的幼嫩子房和胚珠中克隆到了72个棉花MYB基因.序列分析的结果表明它们属于MYB转录因子家族的55个成员,其中有一个MYB蛋白-GhMYB9的氨基酸序列与控制拟南芥单细胞表皮毛的发育启动基因GL1和WER高度同源.它们之间的序列一致性,不仅表现在保守区-DNA结合区,而且也表现在5’和3’的非保守区内.根据序列相似功能相似的原理,我们推测GhMYB9很可能是控制棉纤维发育启动的一个MYB基因.对GhMYB9的Southern杂交结果表明,该基因在棉花基因组中是单拷贝基因;对它的Northern表达分析可知,该基因在花前5天的子房、花前3天的胚珠、花期及花后3天的胚珠中都有表达,但在花前3天的棉纤维发育启动期（我们的扫描电镜结果）高表达.此外,还构建了一个陆地棉可转化人工染色体TAC文库,并通过PCR的方法从中筛选到了含有GhMYB9的TAC克隆.这些结果为进一步对GhMYB9做功能分析、揭示棉纤维发育启动的分子机制奠定了了事实上的基础.

A comparison of different failure assessment methodologies applied to the NESC-1 test

Predictions for a 75x205mm surface semi-elliptic defect in the NESC-1 spinning cylinder test have been made using BS PD 6493:1991, the R6 procedure, non-linear cracked body finite element analysis techniques and the local approach to fracture. All the techniques agree in predicting ductile tearing near the inner surface of the cylinder followed by cleavage initiation. However they differ in the amount of ductile tearing, and the exact location and time of any cleavage event. The amount of ductile tearing decreases with increasing sophistication in the analysis, due to the drop in peak crack driving force and more explicit consideration of constraint effects. The local approach predicts a high probability of cleavage in both HAZ and base material after 190s, while the other predictions suggest that cleavage is unlikely in the HAZ due to constraint loss, but likely in the underlying base material. The timing of this event varies from ∼150s for R6 predictions to ∼250-300s using non-linear cracked body analysis.

Characterisation of technology roadmaps: Purpose and format

A report on characterisation of technology roadmaps, its purpose and formats are presented. A fast-start process is developed to support the initiation of technology roadmapping in firms to address the industrial needs. The purpose of each roadmap is related to a number of planning aims: product, capability, integration, strategic, long-range, programme and process planning. The second set of categories are related to the format of the roadmap, based on observed structure: multiple or single layers, bars, tables, graphs, pictorial forms, flow diagrams and text. It is concluded that technology roadmaps processes a great potential for supporting the development and implementation of business product and technology strategy.

Starting-up roadmapping fast

Technology roadmapping is a powerful technique for supporting technology management and planning in the firm. The roadmap enables the evolution of markets, products and technologies to be explored, together with the linkages between the various perspectives. A process called T-Plan, which has been developed to support the rapid initiation of roadmapping and thus address these challenges is described.

Fracturing of sand in compensation grouting

The phenomenon of fracturing in sand as a result of compensation grouting was studied. Processes of fracture initiation and propagation were explained and a parametric study was conducted in order to investigate the factors that cause sand fracturing to occur. Experimental results indicate that fracture initiation requires the existence of a local inhomogeneity around the injection position. Grout mixture in terms of water-cement ratio and fines content had major roles in sand fracturing, whereas injection rate had a minor influence under the tested conditions. © 2009 Taylor & Francis Group.

On farm trial of freshwater pearl culture

On farm preliminary trial of freshwater pearl culture was done through 20 entrepreneurs in Boilor and Sutiakhali villages of Mymensingh district during 2004. A group of 20 enthusiastic women were selected and trained on the art of mantle tissue dissection, operation for mantle tissue implantation and preparation of ponds for pearl culture. A total of 200 juvenile freshwater mussel, Lamellidens marginalis, were collected from the wild and were used for mantle issue operation. The operated mussels were then transferred to farmer's pond and were subjected to observational trial. Length and weight of each of the test mussels were recorded before hanging them at a depth of 40 cm in net bags (3 mussels/net bag) in ponds at the rate of 24,700 mussels/ha of pond area. Ponds were routinely fertilized with organic and inorganic fertilizers thorough out the mussel rearing period. Water temperature, pH, plankton density and soil organic matter were monitored fortnightly. Growth of pearl is yet to be monitored through sacrifice of the mussels but X-ray photography of a few mussels indicated the initiation of pearl formation in most of them.

The microstructure and mechanical properties of ball-milled stainless steel powder: The effect of hot-pressing vs. laser sintering

The microstructure and mechanical properties of sintered stainless steel powder, of composition AISI 420, have been measured. Ball-milled powder comprising nanoscale grains was sintered to bulk specimens by two alternative routes: hot-pressing and microlaser sintering. The laser-sintered alloy has a porosity of 6% and comprises a mixture of delta ferrite and tempered martensite, and the relative volume fraction varies along the axis of the specimen due to a thermal cycle that evolves with progressive deposition. In contrast, the hot-pressed alloy has a porosity of 0.7% and exhibits a martensitic lath structure with carbide particles at the boundaries of the prior austenite grains. These differences in microstructure lead to significant differences in mechanical properties. For example, the uniaxial tensile strength of the hot-pressed material is one-half of its compressive strength, due to void initiation at the carbide particles at the prior austenite grain boundaries. Nanoindentation measurements reveal a size effect in hardness and also reveal the sensitivity of hardness to the presence of mechanical polishing and electropolishing. © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The frequency response of dynamic friction: Model comparisons

Any linearised theory of the initiation of friction-excited vibration via instability of the state of steady sliding requires information about the dynamic friction force in the form of a frequency response function for sliding friction. Recent measurements of this function for an interface consisting of a nylon pin against a glass disc are used to probe the underlying constitutive law. Results are compared to linearised predictions from the simplest ratestate model of friction, and a ratetemperature model. In both cases the observed variation with frequency is not compatible with the model predictions, although there are some significant points of similarity. The most striking result relates to variation of the normal load: any theory embodying the Coulomb relation F∝N would predict behaviour entirely at variance with the measurements, even though the steady friction force obtained during the same measurements does follow the Coulomb law. © 2011 Elsevier Ltd. All rights reserved.

Glucocorticoid receptor and protein/RNA synthesis-dependent mechanisms underlie the control of synaptic plasticity by stress

Learning and memory are exquisitely sensitive to behavioral stress, but the underlying mechanisms are still poorly understood. Because activity-dependent persistent changes in synaptic strength are believed to mediate memory processes in brain areas such as the hippocampus we have examined the means by which stress affects synaptic plasticity in the CA1 region of the hippocampus of anesthetized rats, Inescapable behavioral stress (placement on an elevated platform for 30 min) switched the direction of plasticity, favoring low frequency stimulation-induced decreases in synaptic transmission (long-term depression, LTD), and opposing the induction of long-term potentiation by high frequency stimulation, We have discovered that glucocorticoid receptor activation mediates these effects of stress on LTD and longterm potentiation in a protein synthesis-dependent manner because they were prevented by the glucocorticoid receptor antagonist RU 38486 and the protein synthesis inhibitor emetine. Consistent with this, the ability of exogenously applied corticosterone in non-stressed rats to mimic the effects of stress on synaptic plasticity was also blocked by these agents, The enablement of low frequency stimulation-induced LTD by both stress and exogenous corticosterone was also blocked by the transcription inhibitor actinomycin D, Thus, naturally occurring synaptic plasticity is liable to be reversed in stressful situations via glucocorticoid receptor activation and mechanisms dependent on the synthesis of new protein and RNA, This indicates that the modulation of hippocampus-mediated learning by acute inescapable stress requires glucocorticoid receptor-dependent initiation of transcription and translation.

Increasing the life of flare tips

Flare tips are essential for safety. Maintenance is difficult and costly. Flare tips are subjected to high combustion temperatures, thermal cycling, oxidation and marine corrosion. Following a number of flare tip failures an in depth study by Imperial College was carried out into the failure of a flare tip from a UK platform, looking for service life improvement. Materials selection and design solutions were considered. The study considered alternative materials and concluded that materials selection was the smaller part of the answer; design changes can double service life. This study used failure investigation, high temperature experimental and thermo-mechanical modelling analysis. The modelling process simulated two common flaring conditions and correctly predicted the observed failure of initiation and crack propagation from holes used to bolt on flame stabilizing plates to the top of the flare. The calculated thermal stress and strains enabled the low cycle fatigue life and minimum creep life to be predicted. It was concluded that service life could be improved by replacing Incoloy alloy 800HT (UNS N08800) with Inconel alloy 625 (UNS N06625), an alloy with attractive mechanical properties and improved high temperature corrosion resistance. Repositioning or eliminating bolt holes can double service life. Copyright 2008, Society of Petroleum Engineers.

Facilitation of learning induced by both random and gradual visuomotor task variation.

Motor task variation has been shown to be a key ingredient in skill transfer, retention, and structural learning. However, many studies only compare training of randomly varying tasks to either blocked or null training, and it is not clear how experiencing different nonrandom temporal orderings of tasks might affect the learning process. Here we study learning in human subjects who experience the same set of visuomotor rotations, evenly spaced between -60° and +60°, either in a random order or in an order in which the rotation angle changed gradually. We compared subsequent learning of three test blocks of +30°→-30°→+30° rotations. The groups that underwent either random or gradual training showed significant (P < 0.01) facilitation of learning in the test blocks compared with a control group who had not experienced any visuomotor rotations before. We also found that movement initiation times in the random group during the test blocks were significantly (P < 0.05) lower than for the gradual or the control group. When we fit a state-space model with fast and slow learning processes to our data, we found that the differences in performance in the test block were consistent with the gradual or random task variation changing the learning and retention rates of only the fast learning process. Such adaptation of learning rates may be a key feature of ongoing meta-learning processes. Our results therefore suggest that both gradual and random task variation can induce meta-learning and that random learning has an advantage in terms of shorter initiation times, suggesting less reliance on cognitive processes.