[Book review] Psychology and Law: Truthfulness, Accuracy and Credibility

Review of: Psychology and law : truthfulness, accuracy and credibility by Amina Memon, Aldert Vrij and Ray Bull. London: McGraw-Hill, 1998.

Duty to mitigate in leasehold law

Discusses by reference to case law, including Commonwealth authorities, the rights and duties of landlords where demised premises are abandoned by a tenant who has defaulted on the rent, including the remedies available to the landlord, the limitations on his right to sue for loss of rent due between abandonment and expiration of the term, and the applicability of the contractual doctrine of mitigation of damages in leasehold law. Examines the Court of Appeal decision in Reichman v Beveridge on the duty of mitigate loss in an action merely seeking recovery of rent as it accrues due.

Termination of tenancies for tenant default: Law Commission's draft Bill

Reviews key proposals of a draft Bill set out in Command Paper: The Law Commission: Termination of Tenancies for Tenant Default (Cm.6946), aimed at replacing the existing law on forfeiture of tenancies. Summarises the main elements of the proposed termination action by landlords, the events justifying such an action, the time limits for serving default notices, the revised range of court orders available and the considerations influencing which type of order to make. Examines the position of qualifying interest holders and the circumstances in which summary termination notices are prohibited.

Legal method and legal reflection: experiential learning in the law school

The two main themes of the conference centre around teaching experiences in legal education and theme and international and European perspectives in legal education.

The Fraud Act 2006: some early observations and comparisons with the former law

Provides a detailed analysis of the Fraud Act 2006 provisions on the offence of fraud by false representation (s.2) and the offence of obtaining services dishonestly (s.11) and assesses the extent to which they address problems arising in connection with the former deception offences under the Theft Acts 1968 and 1978. [From Legal Journals Index]

When deterrence works - and when it doesn't: a comparison of Sweden's prostitution law and UK's Dangerous Dogs Act

Many pieces of legislation have been implemented with the anticipation - or justification - that they will have a deterrent effect. Deterrence was clearly argued in the debate preceding the Swedish prostitution law prohibiting the purchase of sexual services, but less so regarding the Dangerous Dogs Act, which was a very rapid response to a particular moral panic. As it turned out, the Swedish law has had a deterrent effect on street prostitution in that 'respectable' buyers were deterred. It will be argued that it is this very 'respectability' that makes deterrence work in this case. Regarding the Dangerous Dogs Act, the owners of Pit Bulls and other banned breeds are not considered 'respectable' and the banning might have had the reversed effect - increasing the attraction of these dogs, rather than deterring the ownership. Apart from deterrence and its consequences, the rendering invisible of key actors - buyers and owners respectively - and the use of symbolic legislation to promote moral messages will also be considered. [From the Author]

Law in the community: the University of Greenwich/Greenwich Association of Disabled People Centre for Independent Living (GAD) research project

The GAD Advocacy Service is funded by the London Borough of Greenwich Directorate of Neighbourhood Services; its remit to support disabled people experiencing Hate Crime, Domestic Violence and Harassment. Run by disabled personnel and giving advice to all disabled people it is unique in London. Since its inception in 2004, the Advocacy Service has been stretched to its limit - there is a need to extend the remit of the Advocacy Service to give specialist legal advice on other issues. In 2003, the CEDRM-UK project was set up in the University of Greenwich Law Department as part of the Disability Rights Promotion International Legal Education and Research Project; its objectives were firstly, to facilitate the collection of data on the effectiveness of legislation in promoting the rights of disabled persons; and secondly, to pilot new methods in teaching and training in Human Rights Law – students acquire an expertise in Human Rights Law through research into the practical application of legislation relating to civil and human rights in the daily life of the community. In July 2007, GAD and CEDRM-UK embarked on a joint project to report on the work of the Advocacy Service and to create a database to support its caseload. The 2008-9 Project team will report on their work and findings relating to facilitating equality in the workplace; the inclusion of cancer, HIV and multiple sclerosis within the legal definition of disability and the implications of the statutory duty to promote disability equality for the provision of extracurricular activities for schoolchildren. [From the Author]

Zinc polycarboxylate dental cement for the controlled release of an active organic substance: proof of concept

The potential of employing zinc polycarboxylate dental cement as a controlled release material has been studied. Benzalkonium chloride was used as the active ingredient, and incorporated at concentrations of 1, 2 and 3% by mass within the cement. At these levels, there was no observable effect on the speed of setting. Release was followed using an ion-selective electrode to determine changes in chloride ion concentration with time. This technique showed that the additive was released when the cured cement was placed in water, with release occurring by a diffusion mechanism for the first 3 h, but continuing beyond that for up to 1 week. Diffusion coefficients were in the range 5.62 × 10(−6) cm(2) s(−1) (for 1% concentration) to 10.90 × 10(−6) cm(2) s(−1) (for 3% concentration). Up to 3% of the total loading of benzalkonium chloride was released from the zinc polycarboxylate after a week, which is similar to that found in previous studies with glass-ionomer cement. It is concluded that zinc polycarboxylate cement is capable of acting as a useful material for the controlled release of active organic compounds.

The influence of alkali metal chlorides on the loss of water from glass-ionomer dental cements

The water loss behaviour of a clinical glass-ionomer dental cement has been studied with and without the addition of alkali metal chlorides. Dehydrating conditions were provided by placing specimens in a desiccator over concentrated sulphuric acid. Cements were prepared using either pure water or an aqueous solution of metal chloride (LiCl, NaCl, KCl) at 1.0 mol/dm(3). In addition, NaCl at 0.5 mol/dm(3) was also used to fabricate cements. Disc-shaped specimens of size 6 mm diameter x 2 mm thickness were made, six performulation, and cured at 37 degrees C for 1 hour They were then exposed to desiccating conditions, and the mass measured at regular intervals. All formulations were found to lose water in a diffusion process that equilibrated after approximately 3 weeks. Diffusion coefficients ranged from 2.27 (0.13) x 10(9) with no additive to 1.85 (0.07) x 10(9) m(2)/s with 1.0 mol/dm(3) KCl. For the salts, diffusion coefficients decreased in the order LiCl > NaCl > KCl. There was no statistically significant difference between the diffusion coefficients for 1.0 and 0.5 mol/dm(3) NaCl. For all salts at 1.0 mol/dm(3) and also additive-free cements, equilibrium losses were, with statistical limits, the same, ranging from 6.23 to 6.34%. On the other hand, 0.5 mol/dm(3) NaCl lost significantly more water 7.05%.

Review paper: role of aluminum in glass-ionomer dental cements and its biological effects

The role of aluminum in glass-ionomers and resin-modified glass-ionomers for dentistry is reviewed. Aluminum is included in the glass component of these materials in the form of Al(2)O(3) to confer basicity on the glass and enable the glass to take part in the acid-base setting reactions. Results of studies of these reactions by FTIR and magic-angle spinning (MAS)-NMR spectroscopy are reported and the role of aluminum is discussed in detail. Aluminum has been shown to be present in the glasses in predominantly 4-coordination, as well as 5- and 6-coordination, and during setting a proportion of this is converted to 6-coordinate species within the matrix of the cement. Despite this, mature cements may contain detectable amounts of both 4- and 5-coordinate aluminum. Aluminum has been found to be leached from glass-ionomer cements, with greater amounts being released under acidic conditions. It may be associated with fluoride, with which it is known to complex strongly. Aluminum that enters the body via the gastro-intestinal tract is mainly excreted, and only about 1% ingested aluminum crosses the gut wall. Calculation shows that, if a glass-ionomer filling dissolved completely over 5 years, it would add only an extra 0.5% of the recommended maximum intake of aluminum to an adult patient. This leads to the conclusion that the release of aluminum from either type of glass-ionomer cement in the mouth poses a negligible health hazard.

Marginal adaptation and performance of bioactive dental restorative materials in deciduous and young permanent teeth

Objective: The aim of this study was to investigate the adaptation of different types of restorations towards deciduous and young permanent teeth. Materials and Methods: Class V cavities were prepared in deciduous and young permanent teeth and filled with different materials (a conventional glass-ionomer, a resin-modified glass-ionomer, a poly-acid-modified composite resin and a conventional composite resin). Specimens were aged in artificial saliva for 1, 6, 12 and 18 months, then examined by SEM. Results: The composite resin and the polyacid-modified composite had better marginal adaptation than the glass-ionomers,though microcracks developed in the enamel of the tooth. The glass-ionomers showed inferior marginal quality and durability, but no microcracking of the enamel. The margins of the resin-modified glass-ionomer were slightly superior to the conventional glass-ionomer. Conditioning improved the adaptation of the composite resin, but the type of tooth made little or no difference to the performance of the restorative material. All materials were associated with the formation of crystals in the gaps between the filling and the tooth; the quantity and shape of these crystals varied with the material. Conclusions: Resin-based materials are generally better at forming sound, durable margins in deciduous and young permanent teeth than cements, but are associated with microcracks in the enamel. All fluoride-releasing materials give rise to crystalline deposits.

The interaction of zinc oxide-based dental cements with aqueous solutions of potassium fluoride

The ability of zinc oxide-based dental cements (zinc phosphate and zinc polycarboxylate) to take up fluoride from aqueous solution has been studied. Only zinc phosphate cement was found to take up any measurable fluoride after 5 h exposure to the solutions. The zinc oxide filler of the zinc phosphate also failed to take up fluoride from solution. The key interaction for this uptake was thus shown to involve the phosphate groups of the set cement. However, whether this took the form of phosphate/fluoride exchange, or the formation of oxyfluoro-phosphate groups was not clear. Fluoride uptake followed radicaltime kinetics for about 2 h in some cases, but was generally better modelled by the Elovich equation, dq(t)/dt = alpha exp(-beta q(t)). Values for alpha varied from 3.80 to 2.48 x 10(4), and for beta from 7.19 x 10(-3) to 0.1946, though only beta showed any sort of trend, becoming smaller with increasing fluoride concentration. Fluoride was released from the zinc phosphate cements in processes that were diffusion based up to M(t)/M(infinity) of about 0.4. No further release occurred when specimens were placed in fresh volumes of deionised water. Only a fraction of the fluoride taken up was re-released, demonstrating that most of the fluoride taken up becomes irreversibly bound within the cement.

Water transport in resin-modified glass-ionomer dental cement

Water uptake and water loss have been studied in a commercial resin-modified glass-ionomer cement, Fuji II LC, under a variety of conditions. Uptake was generally non-Fickian, but affected by temperature. At room temperature, the equilibrium water uptake values varied from 2.47 to 2.78% whereas at low temperature (12 degrees C), it varied from 0.85 to 1.18%. Cure time affected uptake values significantly. Water uptake was much lower than in conventional glass-ionomer restorative cements exposed to water vapor. Loss of water under desiccating conditions was found to be Fickian for the first 5 h loss at both 22 and 12 degrees C. Diffusion coefficients were between 0.45 and 0.76 x 10( -7) cm(2)/s, with low temperature diffusion coefficients slightly greater than those at room temperature. Plotting water loss as percentage versus s(-(1/2)) allowed activation energies to be determined from the Arrhenius equation and these were found to be 65.6, 79.8, and 7.7 kJ/mol respectively for 30, 20, and 10 s cure times. The overall conclusion is that the main advantage of incorporating HEMA into resin-modified-glass-ionomers is to alter water loss behavior. Rate of water loss and total amount lost are both reduced. Hence, resin-modified glass-ionomers are less sensitive to water loss than conventional glass-ionomers.