Streets for people, or why we should reuse buildings in the city centre

Cities are constantly changing, and city centres are the pinnacle of that change. In the last hundred years these changes have been dramatic, transforming city centres from a complex combination of uses into exclusively retail and leisure areas. Meanwhile, most residents of city centres fled to the suburbs, removing much of the livelihood of central areas. These transformations has been stronger in Northern Europe and especially in English speaking countries, where zoning policies were instrumental in urban development since the 1960s. This process along with the rise of shopping malls left many city centre streets lifeless, which in turn caused the dereliction and demolition of significant heritage areas and buildings. Belfast is no exception, where the broad process of suburbanization and zoning since the 1970s produced a city centre for either retail or dereliction, where much built heritage has been lost or is at risk of being lost.

Tunnel spoil classification and applicability of lime addition in weak formations for muck reuse

Tunnel construction planning requires careful consideration of the spoil management part, as this involves environmental, economic and legal requirements. In this paper a methodological approach that considers the interaction between technical and geological factors in determining the features of the resulting muck is proposed. This gives indications about the required treatments as well as laboratory and field characterisation tests to be performed to assess muck recovery alternatives. While this reuse is an opportunity for excavations in good quality homogeneous grounds (e.g. granitic mass), it is critical for complex formation. This approach has been validated, at present, for three different geo-materials resulting from a tunnel excavation carried out with a large diameter Earth Pressure Balance Shield (EPB) through a complex geological succession. Physical parameters and technological features of the three materials have been assessed, according to their valorisation potential, for defining re-utilisation patterns. The methodology proved to be effective and the laboratory tests carried out on the three materials allowed the suitability and treatment effectiveness for each muck recovery strategy to be defined. © 2014 Elsevier Ltd.

Origin, seasonality and chemical characteristics of rainwater in Aveiro

Este trabalho teve como objectivo caracterizar quimicamente a água da chuva recolhida na cidade de Aveiro, localizada a sudoeste da Europa, no período de Setembro de 2008 a Setembro de 2009. Para matrizes diluídas como a da água da chuva, as metodologias analíticas a utilizar para se conseguir uma rigorosa caracterização química são de grande importância e ainda não estão uniformizadas. Assim, para caracterizar a fracção orgânica, primeiramente foram comparadas duas metodologias de filtração (0.22 e 0.45 μm) e foram estudados dois procedimentos de preservação da água da chuva (refrigeração e congelação), utilizando a espectroscopia de fluorescência molecular. Além disso, foram comparados dois procedimentos de isolamento e extracção da matéria orgânica dissolvida (DOM) da água da chuva, baseados na sorção nos sorbentes DAX-8 e C-18, utilizando as espectroscopias de ultravioleta-visível e fluorescência molecular. Relativamente aos resultados das metodologias de filtração e preservação, é recomendada a filtração por 0.45 μm, assim como, as amostras de água da chuva deverão ser mantidas no escuro a 4ºC, no máximo até 4 dias, até às análises espectroscópicas. Relativamente à metodologia de isolamento e extracção da DOM, os resultados mostraram que o procedimento de isolamento baseado na C-18 extraiu a DOM que é representativa da matriz global, enquanto que o procedimento da DAX-8 extraiu preferencialmente a fracção do tipo húmico. Como no presente trabalho pretendíamos caracterizar a fracção do tipo húmico da DOM da água da chuva, foi escolhida a metodologia de isolamento e extracção baseada na sorção no sorvente DAX-8. Previamente ao isolamento e extracção da DOM da água da chuva, toda a fracção orgânica das amostras de água da chuva foi caracterizada pelas técnicas de ultravioleta-visível e de fluorescência molecular. As amostras mostraram características semelhantes às de outras águas naturais, e a água da chuva do Verão e Outono apresentou maior conteúdo da matéria orgânica dissolvida cromofórica que a do Inverno e Primavera. Posteriormente, a fracção do tipo húmico de algumas amostras de água da chuva, isolada e extraída pelo procedimento baseado na DAX-8, foi caracterizada utilizando as técnicas espectroscópicas de ultravioleta-visível, fluorescência molecular e ressonância magnética nuclear de protão. Todos os extractos continham uma mistura complexa de compostos hidroxilados e ácidos carboxílicos, com uma predominância da componente alifática e um baixo conteúdo da componente aromática. A fracção inorgânica da água da chuva foi caracterizada determinando a concentração das seguintes espécies iónicas: H+, NH4 +, Cl-, NO3 -, SO4 2-. Os resultados foram comparados com os obtidos na chuva colectada no mesmo local entre 1986-1989 e mostraram que de todos os iões determinados a concentração de NO3 - foi a única que aumentou (cerca do dobro) em 20 anos, tendo sido atribuído ao aumento de veículos e emissões industriais na área de amostragem. Durante o período de amostragem cerca de 80% da precipitação esteve associada a massas de ar oceânicas, enquanto a restante esteve relacionada com massas que tiveram uma influência antropogénica e terrestre. De um modo geral, para as fracções orgânica e inorgânica da água da chuva analisadas, o conteúdo químico foi menor para as amostras que estiveram associadas a massas de ar marítimas do que para as amostras que tiveram contribuições terrestres e antropogénicas.

Mythotextuality and the evolution of ideologies the reuse of the Epic of Gilgamesh in North American texts

When the scribes of ancient Mesopotamia rewrote the Epic of Gilgamesh over a period of over two thousand years, the modifications made reflected the social transformations occurring during the same era. The dethroning of the goddess Inanna-Ishtar and the devaluation of other female characters in the evolving Epic of Gilgamesh coincided with the declining status of women in society. Since the 1960s, translations into modern languages have been readily available. The Mesopotamian myth has been reused in a wide variety of mythic and mythological texts by Quebecois, Canadian and American authors. Our analysis of the first group of mythic texts, written in the 1960s and 1970s, shows a reversal of the tendency of the Mesopotamian texts. Written at a time when the feminist movement was transforming North American society, these retellings feature a goddess with her high status restored and her ancient attributes re-established. Another group of writers, publishing in the 1980s and 1990s, makes a radical shift away from these feminist tendencies while still basically rewriting the Epic. In this group of mythic texts, the goddess and other female characters find their roles reduced while the male gods and characters have expanded and glorified roles. The third group of texts analysed does not rewrite the Epic. The Epic is reused here intertextually to give depth to mythological works set in the twentieth century or later. The dialogue created between the contemporary text and the Epic emphasises the role that the individual has in society. A large-scale comparative mythotextual study of texts that share a common hypotext can, especially when socio-historical factors are considered, provide a window onto the relationship between text and society. A comparative study of how the Epic of Gilgamesh is rewritten and referred to intertextually through time can help us relativize the understanding of our own time and culture.

Estudo económico-financeiro sobre a implementação de sistemas de uso eficiente da água numa habitação

Trabalho de Projecto de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil

An integrated recycling approach for GFRP pultrusion wastes: recycling and reuse assessment into new composite materials using Fuzzy Boolean Nets

In this study, efforts were made in order to put forward an integrated recycling approach for the thermoset based glass fibre reinforced polymer (GPRP) rejects derived from the pultrusion manufacturing industry. Both the recycling process and the development of a new cost-effective end-use application for the recyclates were considered. For this purpose, i) among the several available recycling techniques for thermoset based composite materials, the most suitable one for the envisaged application was selected (mechanical recycling); and ii) an experimental work was carried out in order to assess the added-value of the obtained recyclates as aggregates and reinforcement replacements into concrete-polymer composite materials. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified concrete-polymer composites with regard to unmodified materials. In the mix design process of the new GFRP waste based composite material, the recyclate content and size grade, and the effect of the incorporation of an adhesion promoter were considered as material factors and systematically tested between reasonable ranges. The optimization process of the modified formulations was supported by the Fuzzy Boolean Nets methodology, which allowed finding the best balance between material parameters that maximizes both flexural and compressive strengths of final composite. Comparing to related end-use applications of GFRP wastes in cementitious based concrete materials, the proposed solution overcome some of the problems found, namely the possible incompatibilities arisen from alkalis-silica reaction and the decrease in the mechanical properties due to high water-cement ratio required to achieve the desirable workability. Obtained results were very promising towards a global cost-effective waste management solution for GFRP industrial wastes and end-of-life products that will lead to a more sustainable composite materials industry.

Uso eficiente da água num edifício de habitação

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil

An experimental study on recycling and reuse of pultruded composite material wastes

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behavior over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

A case study undertaken recycling & reuse of glass fiber reinforced thermoset polumer wastes of composite materials industry

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: crosslinked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Studies on the Quality of Rainwater at Various Land Use Locations and Variations by Interaction with Domestic Rainwater Harvesting Systems

The present study focused on the quality of rainwater at various land use locations and its variations on interaction with various domestic rainwater harvesting systems.Sampling sites were selected based upon the land use pattern of the locations and were classified as rural, urban, industrial and sub urban. Rainwater samples were collected from the south west monsoon of May 2007 to north east monsoon of October 2008, from four sampling sites namely Kothamangalam, Emakulam, Eloor and Kalamassery, in Ernakulam district of the State of Kerala, which characterized typical rural, urban, industrial and suburban locations respectively. Rain water samples at various stages of harvesting were also collected. The samples were analyzed according to standard procedures and their physico-chemical and microbiological parameters were determined. The variations of the chemical composition of the rainwater collected were studied using statistical methods. It was observed that 17.5%, 30%, 45.8% and 12.1% of rainwater samples collected at rural, urban, industrial and suburban locations respectively had pH less than 5.6, which is considered as the pH of cloud water at equilibrium with atmospheric CO,.Nearly 46% of the rainwater samples were in acidic range in the industrial location while it was only 17% in the rural location. Multivariate statistical analysls was done using Principal Component Analysis, and the sources that inf1uence the composition of rainwater at each locations were identified .which clearly indicated that the quality of rain water is site specific and represents the atmospheric characteristics of the free fall The quality of harvested rainwater showed significant variations at different stages of harvesting due to deposition of dust from the roof catchment surface, leaching of cement constituents etc. Except the micro biological quality, the harvested rainwater satisfied the Indian Standard guide lines for drinking water. Studies conducted on the leaching of cement constituents in water concluded that tanks made with ordinary portland cement and portland pozzolana cement could be safely used for storage of rain water.

Risk Assessment of Rooftop- Collected Rainwater for Individual Household and Community Use in Central Kerala, India

Water quality of rooftop-collected rainwater is an issue of increased interest particularly in developing countries where the collected water is used as a source of drinking water. Bacteriological and chemical parameters of 25 samples of rooftop-harvested rainwater stored in ferrocement tanks were analyzed in the study described in this article. Except for the pH and lower dissolved oxygen levels, all other physicochemical parameters were within World Health Organization guidelines. Bacteriological results revealed that the rooftop-harvested rainwater stored in tanks does not often meet the bacteriological quality standards prescribed for drinking water. Fifty percent of samples of harvested rainwater for rural and urban community use and 20% of the samples for individual household use showed the presence of E. coli. Fecal coliform/fecal streptococci ratios revealed nonhuman animal sources of fecal pollution. Risk assessment of bacterial isolates from the harvested rainwater showed high resistance to ampicillin, erythromycin, penicillin, and vancomycin. Multiple antibiotic resistance (MAR) indexing of the isolates and elucidation of the resistance patterns revealed that 73% of the isolates exhibited MAR

Reuse in the development process of TOSCANA systems

TOSCANA is a graphical tool that supports the human-centered interactive processes of conceptual knowledge processing. The generality of the approach makes TOSCANA a universal tool applicable to a variety of domains. Only the so-called conceptual scales have to be designed for new applications. The presentation shows how the use of abstract scales allows the reuse of formerly defined conceptual scales. Furthermore it describes how thesauri and conceptual taxonomies can be integrated in the generation of conceptual scales.

Secuenciamiento de actividades educativas orientado a la reutilización y la auto-organización en tutoría inteligente. ' 'Sequencing of learning activities oriented towards reuse and auto-organization for intelligent tutoring systems' '.

Se pretende la elaboración una plataforma capaz de implementar sistemas de tutoría inteligente, orientada al problema de la adaptación del secuenciamiento; la creación de una herramienta o método que defina secuenciamientos adaptativos de material educativo; el desarrollo, empleando la herramienta anterior, de uno o más tutores y adaptar las técnicas de inteligencia de enjambre al campo de los cursos impartidos a través de Internet, Elearning.. En primer lugar se analiza el estado de la cuestión, destacando los aspectos novedosos. A continuación se presentan las aportaciones de la investigación. Por último, se exponen las conclusiones y las líneas de investigación abiertas. También se incluyen apéndices con información adicional que puede ser relevante para algunos lectores. Se investiga el uso de técnicas de inteligencia de enjambre para obtener sistemas educativos robustos y con capacidad de autoorganización. Las lecciones aprendidas de los sistemas cristalizan en la creación de un módulo para SIT.. Las principales contribuciones son: el diseño de una plataforma para el desarrollo de Sistemas de Tutoría Inteligentes (ITS); se presenta una herramienta para la adaptación de secuencias de unidades de aprendizaje, grafos de secuenciamiento (Sequencing Graphs, SG) y se analizan las iniciativas actuales relacionadas con las técnicas de enjambre en educación. Estas técnicas tienen un interés especial para los sistemas de elearning dada su complejidad. .