Aseismic deformation in subduction megathrusts : central Andes and north-east Japan

We aim to characterize fault slip behavior during all stages of the seismic cycle in subduction megathrust environments with the eventual goal of understanding temporal and spatial variations of fault zone rheology, and to infer possible causal relationships between inter-, co- and post-seismic slip, as well as implications for earthquake and tsunami hazard. In particular we focus on analyzing aseismic deformation occurring during inter-seismic and post-seismic periods of the seismic cycle. We approach the problem using both Bayesian and optimization techniques. The Bayesian approach allows us to completely characterize the model parameter space by searching a posteriori estimates of the range of allowable models, to easily implement any kind of physically plausible a priori information and to perform the inversion without regularization other than that imposed by the parameterization of the model. However, the Bayesian approach computational expensive and not currently viable for quick response scenarios. Therefore, we also pursue improvements in the optimization inference scheme. We present a novel, robust and yet simple regularization technique that allows us to infer robust and somewhat more detailed models of slip on faults. We apply such methodologies, using simple quasi-static elastic models, to perform studies of inter- seismic deformation in the Central Andes subduction zone, and post-seismic deformation induced by the occurrence of the 2011 Mw 9.0 Tohoku-Oki earthquake in Japan. For the Central Andes, we present estimates of apparent coupling probability of the subduction interface and analyze its relationship to past earthquakes in the region. For Japan, we infer high spatial variability in material properties of the megathrust offshore Tohoku. We discuss the potential for a large earthquake just south of the Tohoku-Oki earthquake where our inferences suggest dominantly aseismic behavior.

Seismic structure along transitions from flat to normal subduction: central Mexico, southern Peru, and southwest Japan

The fine-scale seismic structure of the central Mexico, southern Peru, and southwest Japan subduction zones is studied using intraslab earthquakes recorded by temporary and permanent regional seismic arrays. The morphology of the transition from flat to normal subduction is explored in central Mexico and southern Peru, while in southwest Japan the spatial coincidence of a thin ultra-slow velocity layer (USL) atop the flat slab with locations of slow slip events (SSEs) is explored. This USL is also observed in central Mexico and southern Peru, where its lateral extent is used as one constraint on the nature of the flat-to-normal transitions.

In western central Mexico, I find an edge to this USL which is coincident with the western boundary of the projected Orozco Fracture Zone (OFZ) region. Forward modeling of the 2D structure of the subducted Cocos plate using a finite-difference algorithm provides constraints on the velocity and geometry of the slab’s seismic structure in this region and confirms the location of the USL edge. I propose that the Cocos slab is currently fragmenting into a North Cocos plate and a South Cocos plate along the projection of the OFZ, by a process analogous to that which occurred when the Rivera plate separated from the proto-Cocos plate 10 Ma.

In eastern central Mexico, observations of a sharp transition in slab dip near the abrupt end of the Trans Mexican Volcanic Belt (TMVB) suggest a possible slab tear located within the subducted South Cocos plate. The eastern lateral extent of the USL is found to be coincident with these features and with the western boundary of a zone of decreased seismicity, indicating a change in structure which I interpret as evidence of a possible tear. Analysis of intraslab seismicity patterns and focal mechanism orientations and faulting types provides further support for a possible tear in the South Cocos slab. This potential tear, together with the tear along the projection of the OFZ to the northwest, indicates a slab rollback mechanism in which separate slab segments move independently, allowing for mantle flow between the segments.

In southern Peru, observations of a gradual increase in slab dip coupled with a lack of any gaps or vertical offsets in the intraslab seismicity suggest a smooth contortion of the slab. Concentrations of focal mechanisms at orientations which are indicative of slab bending are also observed along the change in slab geometry. The lateral extent of the USL atop the horizontal Nazca slab is found to be coincident with the margin of the projected linear continuation of the subducting Nazca Ridge, implying a causal relationship, but not a slab tear. Waveform modeling of the 2D structure in southern Peru provides constraints on the velocity and geometry of the slab’s seismic structure and confirms the absence of any tears in the slab.

In southwest Japan, I estimate the location of a possible USL along the Philippine Sea slab surface and find this region of low velocity to be coincident with locations of SSEs that have occurred in this region. I interpret the source of the possible USL in this region as fluids dehydrated from the subducting plate, forming a high pore-fluid pressure layer, which would be expected to decrease the coupling on the plate interface and promote SSEs.

Studies on the submerged plant community in Lake Biwa. I. Distribution and productivity of Egeria densa. A submerged plant invader in the south basin [Translation from: Physiol.Ecol.Japan 17, 283-290, 1976]

Egeria densa (PLANCH.) ST. JOHN, a submerged plant invader, forms a wide submerged plant zone, particularly along the west coast of the south basin, Lake Biwa. The macrophyte occupies over 82% of the plant zone in the basin and its biomass reaches 93% of the total. The estimated annual net production was approximately 1 kg dry wt./m2 in a dense area, which is about 4.5 times as much as the net production by phytoplankton in an offshore area of the basin. Although the area covered by the macrophyte is only 5.8% of the total of the basin, it produced about one-tenth of the total annual primary production. In the most productive season Egeria produced 46% of the total primary productivity. Thus, the macrophyte never be neglected when one considers the energy flow or material circulation in the basin. This study was initiated in order to clarify the role of submerged macrophytes, particularly E. densa, in Lake Biwa. The following points are reported in this paper: the distribution of macrophytes in the south basin; seasonal change in standing crop of E. densa; seasonal change in values related to production, utilizing a model proposed by Ikushima with its parameters experimentally determined.

Hatching date, nursery grounds, and early growth of juvenile walleye pollock (Theragra chalcogramma) off northern Japan*

Walleye pollock (Theragra chalcogramma) is widely distributed in the North Pacific Ocean and plays an important role in coastal subarctic ecosystems. The Japanese Pacific population of this species is one of the most important demersal fishes for commercial fisheries in northern Japan. The population is distributed along the Pacific coast of Hokkaido and the Tohoku area (Fig. 1), which is the southern limit of distribution of the species in the western North Pacific. In Funka Bay, the main spawning ground for this population, pollock spawn from December to March (Kendall and Nakatani, 1992). Planktonic eggs and larvae are transported into the bay, where juveniles usually remain until late July when they reach 60−85 mm in total length (Hayashi et al., 1968; Nakatani and Maeda, 1987). These juvenile pollock then migrate from Funka Bay eastward to the Doto area off southeastern Hokkaido (Honda et al., 2004). Many studies on eggs, larvae, and juveniles of the species have been conducted in or near Funka Bay, but little information is available on the ecology of the early life stages in the Tohoku area. Hashimoto and Ishito (1991) suggested that eggs are transported from Funka Bay southward to the Tohoku area by the coastal branch of the Oyashio Current, but there has been no study to verify this hypothesis.

Fishery damage compensation system of Japan

This paper introduces the fishery damage compensation system in Japan and suggests its suitability for other areas of the world.

Impact of the introduction of apple snails and their control in Japan

The apple snail, Pomacea canaliculata, was imported into Japan and cultured extensively for food in the early 1980s. Not long after, escaped or discarded snails became feral and started feeding on rice seedlings and other aquatic plants. This was especially noted in Kyushu in southern Japan. Snails are still proliferating, but the area of damaged rice is not increasing as fast, mainly because of the success of snail control. Currently, the most effective methods of avoiding damage to rice are keeping water shallow, transplanting older seedlings and, in some cases, using molluscicides or repellents. However, these methods have almost no effect on damage by snail feeding when rice fields are flooded. The apple snail is believed to be the most important obstacle to the spread of direct-sowing culture of rice in Kyushu. The Ministry of Agriculture, Forestry and Fisheries has launched a national project for the integrated management of the snail under direct sowing culture of rice in Kyushu. The Ministry of Agriculture, Forestry and Fisheries has launched a national project for the integrated management of the snail under direct-sowing rice culture. Some recent results from this project are briefly reviewed in this paper.

Annual report 2006 - North Pacific Marine Science Organization (PICES). Fifteenth meeting, Yokohama, Japan, October 13-22, 2006

◾ Report of Opening Session (p. 1) ◾ Report of Governing Council (p. 15) ◾ Report of the Finance and Administration Committee (p. 47) ◾ Reports of Science Board and Committees: Science Board Inter-sessional Meeting (p. 63); Science Board (p. 73); Biological Oceanography Committee (p. 87); Fishery Science Committee (p. 95); Marine Environmental Quality Committee (p. 105); MONITOR Technical Committee (p. 115); Physical Oceanography and Climate Committee (p. 125); Technical Committee on Data Exchange (p. 133) ◾ Reports of Sections, Working and Study Groups: Section on Carbon and Climate (p. 139); Section on Ecology of Harmful Algal Blooms in the North Pacific (p. 143); Working Group 18 on Mariculture in the 21st Century - The Intersection Between Ecology, Socio-economics and Production (p. 147); Working Group 19 on Ecosystem-Based Management Science and its Application to the North Pacific (p. 151); Working Group 20 on Evaluations of Climate Change Projections (p. 157); Working Group 21 on Non-indigenous Aquatic Species (p. 159); Study Group to Develop a Strategy for GOOS (p. 165) ◾ Reports of the Climate Change and Carrying Capacity Scientific Program: Implementation Panel on the CCCC Program (p. 169); CFAME Task Team (p. 175); MODEL Task Team (p. 181) ◾ Reports of Advisory Panels: Advisory Panel for a CREAMS/PICES Program in East Asian Marginal Seas (p. 187); Advisory Panel on Continuous Plankton Recorder Survey in the North Pacific (p. 193); Advisory Panel on Iron Fertilization Experiment in the Subarctic Pacific Ocean (p. 197); Advisory Panel on Marine Birds and Mammals (p. 201); Advisory Panel on Micronekton Sampling Inter-calibration Experiment (p. 205) ◾ Summary of Scientific Sessions and Workshops (p. 209) ◾ Membership List (p. 259) ◾ List of Participants (p. 277) ◾ List of PICES Acronyms (p. 301) ◾ List of Acronyms (p. 303)

An environmentally based growth model that uses finite difference calculus with maximum likelihood method: its application to the brackish water bivalve Corbicula japonica in Lake Abashiri, Japan

We present a growth analysis model that combines large amounts of environmental data with limited amounts of biological data and apply it to Corbicula japonica. The model uses the maximum-likelihood method with the Akaike information criterion, which provides an objective criterion for model selection. An adequate distribution for describing a single cohort is selected from available probability density functions, which are expressed by location and scale parameters. Daily relative increase rates of the location parameter are expressed by a multivariate logistic function with environmental factors for each day and categorical variables indicating animal ages as independent variables. Daily relative increase rates of the scale parameter are expressed by an equation describing the relationship with the daily relative increase rate of the location parameter. Corbicula japonica grows to a modal shell length of 0.7 mm during the first year in Lake Abashiri. Compared with the attain-able maximum size of about 30 mm, the growth of juveniles is extremely slow because their growth is less susceptible to environmental factors until the second winter. The extremely slow growth in Lake Abashiri could be a geographical genetic variation within C. japonica.

Larval ontogeny of a percichthyid fish, Synagrops philippinensis (Günther) in Kagoshima Bay, southern Japan

The larval ontogeny of a developmental series (1.2-8.3mm body length, BL) of Synagrops philippinensis from Kagoshima Bay, southern Japan is described and illustrated. The yolk was completely absorbed in larva of ≥1.5 mm BL. Notochord flexion commenced at about 3.5mm BL and was completed by about 4.0-4.5mm BL. S. philippinensis larvae were distinguished from their congeners based on melanophore patterns, head spination and fin spines and rays. Larvae of 7.5-8.3 mm BL were characterized by anteriorly serrated pelvic spine, two anal spines, nine inner preopercular spines and no melanophore on lateral side of the caudal peduncle; 7.0 to 7.5mm BL larvae by the above characters except serration on pelvic spine; and yolk-sac, pre-flexion, flexing and post-flexion larvae up to 7.0mm BL by unique melanophores on lower lobe of pectoral finfold/fin.