Development of an efficient particle approach for micro-scale gas flow simulations

The micro-scale gas flows are usually low-speed flows and exhibit rarefied gas effects. It is challenging to simulate these flows because traditional CFD method is unable to capture the rarefied gas effects and the direct simulation Monte Carlo (DSMC) method is very inefficient for low-speed flows. In this study we combine two techniques to improve the efficiency of the DSMC method. The information preservation technique is used to reduce the statistical noise and the cell-size relaxed technique is employed to increase the effective cell size. The new cell-size relaxed IP method is found capable of simulating micro-scale gas flows as shown by the 2D lid-driven cavity flows.

Development of new applications of inductively coupled plasma mass spectrometry (ICP-MS) hyphenated with different sample introduction systems

225 p. : il. Texto en español con conclusiones en inglés

Development of catalytic methane reforming systems integrating hydrogen selective PdCu membrane modules

En la presente tesis doctoral se ha estudiado la integración del proceso de producción de hidrógeno con su purificación mediante el empleo de membranas selectivas de hidrógeno. La producción de hidrógeno se realiza empleando catalizadores no convencionales de níquel soportado sobre magnesia y alúmina en un reactor catalítico. Se analiza la actividad de los catalizadores y la producción de hidrógeno mediante distintos procesos con metano como son la oxidación parcial catalítica (OPC), OPC húmeda y reformadoLa purificación de hidrógeno se realiza en un módulo provisto de una membrana selectiva de hidrógeno de PdCu depositado en un soporte poroso cerámico. Una vez optimizada su preparación mediante deposición no electrolítica se caracterizan. Para ello se determina su permeabilidad a distintas temperaturas y realizando ciclos térmicos en atmósferas inerte y de hidrógeno, que puede fragilizar el metal. Una vez preparados los catalizadores y las membranas se integran los dos sistemas y se determinan los parámetros de operación óptimos como la presión de la línea de alimentación y el caudal de gas de arrastre en el módulo de membrana. Ambos parámetros se optimizan para lograr la máxima recuperación de hidrógeno en el módulo de membrana. Por últimos se realizan ensayos completos de producción y purificación, que permiten observar el rendimiento del sistema y también el efecto que los compuestos de la mezcla compleja alimentada a las membranas tienen en su comportamiento. Para concluir la integración de procesos se realizan ensayos añadiendo azufre de forma que el sistema sea más similar al proceso real. Esto permite también analizar el efecto del azufre tanto en los catalizadores como en las membranas.

Feasibility of adopting integrated rice-cum-fish culture system to enhance the development of conventional aquaculture participation in Niger State

In a survey conducted to find out the status of integrated rice-cum-fish culture in Niger State, Nigeria, 0.37 ha of Fadama wetlands was utilized for rice-cum-fish culture and at experimental stage. In the case study of this rice-cum-fish model, the Nile Tilapia (Oreochromis niloticus) was involved. The result was that 1,4720 kg/ha/yr could be produced using chick manure application under rice-cum-fish culture model. The available records reveal that 233,079 ha out of 495,000 ha of estimated Fadama in Niger State was used for rice cultivation in 1997. If 233,079 ha were to be used for integrated rice-cum fish culture, it is estimated that 343,092 mt of fish (Oreochromis niloticus) could be produced per year. The fish demand in Niger State in 2002 was 50,000 mt. The NPK application under rice-cum-fish production gave the best rice production estimated at 43,968.0 kg/ha/yr. The percentage increase in rice yield as well as increase in net income due to introduction of fish was 10.1 % and 54.4% respectively. The culture system is therefore recommended for adoption towards greater participation in aquaculture development by the farmers

Photographic database development of Nigerian fisheries: a complementary source of information documentation

The paper traces the history of the different documentation media used for information dissemination. Such early media are clay tablets, papyrus, and vellum or parchment codex. The invention of printing however revolutionized the information industry, enabling the production of books in multiple copies. Photography came into documentation mainly to preserve rare materials and those that easily deteriorate. This paper reports the efforts of National Institute for Freshwater Fisheries Research (NIFFR) and Kainji Lake Fisheries Promotion Project (KLFPPP), Nigeria, to develop an Object Oriented Database (OOD) using photographs. The photographs are stored in digitized form on commercial computers, using the program ACDSee 32 for classification, description and retrieval. Specifically the paper focuses on photographs in fisheries as visual communication and expression. Presently, the database contains photo documents about the following aspects of Kainji Lake fisheries: fishing gears and crafts, fish preservation methods

Development of arc root attachment in the nozzle of 1 kW N2 and H2-N2 arcjet thrusters

Arc root behavior affects the energy transfer and nozzle erosion in an arcjet thruster. To investigate the development of arc root attachment in 1 kW class N2 and H2-N2 arcjet thrusters from the time of ignition to the stably working condition, a kinetic series of end-on view images of the nozzle obtained by a high-speed video camera was analyzed. The addition of hydrogen leads to higher arc voltage levels and the determining factor for the mode of arc root attachment was found to be the nozzle temperature. At lower nozzle temperatures, constricted type attachment with unstable motions of the arc root was observed, while a fully diffused and stable arc root was observed at elevated nozzle temperatures.

The development of the South Carolina Coastal Information Network and portal site: Bringing training opportunities and educational resources to coastal community officials and the public

The South Carolina Coastal Information Network (SCCIN) emerged as a result of a number of coastal outreach institutions working in partnership to enhance coordination of the coastal community outreach efforts in South Carolina. This organized effort, led by the S.C. Sea Grant Consortium and its Extension Program, includes partners from federal and state agencies, regional government agencies, and private organizations seeking to coordinate and/or jointly deliver outreach programs that target coastal community constituents. The Network was officially formed in 2006 with the original intention of fostering intra-and inter- agency communication, coordination, and cooperation. Network partners include the S.C. Sea Grant Consortium, S.C. Department of Health and Environmental Control – Office of Ocean and Coastal Resource Management and Bureau of Water, S.C. Department of Natural Resources – ACE Basin National Estuarine Research Reserve, North Inlet-Winyah Bay National Estuarine Research Reserve, Clemson University Cooperative Extension Service and Carolina Clear, Berkeley-Charleston-Dorchester Council of Governments, Waccamaw Regional Council of Governments, Urban Land Institute of South Carolina, S.C. Department of Archives and History, the National Oceanic and Atmospheric Administration – Coastal Services Center and Hollings Marine Laboratory, Michaux Conservancy, Ashley-Cooper Stormwater Education Consortium, the Coastal Waccamaw Stormwater Education Consortium, the S.C. Chapter of the U.S. Green Building Council, and the Lowcountry Council of Governments. (PDF contains 3 pages)

Fishery management plans and the development of artisanal fisheries in Nigeria: a review

Management of natural resources all over the world is of paramount importance to their sustainability in developing countries like Nigeria, there is less emphasis on proper management especially of fishery and other aquatic resources due to lack of sensitization and enlightenment of the rural dwellers who are closer to such natural resources. The main thrust of this review is to examine the management plans for Nigerian freshwater bodies (rivers and lakes) and the impact of such plans on the artisanal fisheries development in Nigeria. From the on-shelf information gathered there is scarcity of information on the management of Nigerian freshwater body's information available indicates that there is the traditional fisheries management and the government legal approach in form of fisheries Laws and Regulations. However, these management techniques are poorly carried out since there is a poor follow-up. Appreciable impact of fisheries management introduced on Kanji Lake by the Nigerian-German Kanji Lake Fisheries Promotion Project (NGKLFPP) between 1993 and 2001 proves worthwhile as this introduced some management measures such as implementation of fisheries Laws and Regulations, the ban of obnoxious fishing methods, introduction of fishing license, constitution of a management unit and appointment of liaison fishermen. Within the operative years of the project a lot of success was achieved and it is recommended that the approach in Kainji should be replicated in other freshwater bodies in Nigeria to alleviate poverty in the rural poor fishing communities

The role of fishermen cooperative societies in the development of fisheries resources on Kainji Lake basin, Nigeria

Field survey was conducted to evaluate the role of fishermen cooperative in the development of fisheries resources in Kainji Lake. The study was conducted with aid of questionnaires administered in five fishing villages namely Monnai, Yuna, Kaya, Malale and Tunga Danbaba. Ten questionnaires were administered in each fishing village majority of the fishermen interviewed are between the ages of 20-40 years. The results of the educational background revealed that 60% of the respondents were knowledgeable only on Quranic education. Majority of the respondents (86%) was members of fishermen cooperative societies. Only 32% of the respondents indicated to have benefited for loan and credit facilities. Sixty-nine (69) percent of fishermen realized income of between N1, 000-N2, and 000 daily. The major problem facing fishermen cooperative includes lack of capital, lack of access to loan and credit facilities, shortage of adequately trained and well-motivated fisheries extension workers, inadequate fishing inputs and high charge of fishing license fees by Kainji Lake fisheries Management and Conservation Unit (KLFMCU). Recommendation was made on how to improve fishermen cooperative for the development of the lake fisheries resources

Development of selection methods for steels and their heat treatments

Designers who want to manufacture a hardenable steel component need to select both the steel and its heat treatment. This project aims to develop a selection methodology for steels and process routes as an aid to designers. Three studies were conducted: - production of software to calculate the "equivalent diameter" and "equivalent Jominy distance" for simple shapes of a steel component; - prediction of semi-empirical Jominy curves (as-cooled) using CCT diagrams and process modelling methods, which were validated by experiment on plain carbon steels; - investigation of tempering of Jominy bars to explore the potential for semi-empirical models for the hardness after tempering.