A COMUNICA����O DE MERCADO, O LUXO E A CONSTRU����O DA MARCA MERCEDES-BENZ: TEMPO VERSUS CONCEITOS

A marca Mercedes-Benz �� uma marca legend��ria e est�� presente no imagin��rio do consumidor quando o assunto �� autom��vel. A hist��ria dessa importante ind��stria automobil��stica ultrapassa os 100 anos (1902-2008) e a cada dia impressiona ainda mais com novos modelos, sin��nimo de tecnologia, qualidade, seguran��a e luxo. Este trabalho visa analisar e compreender o processo de comunica����o da marca Mercedes-Benz, que surgiu em 1902 (como Mercedes), depois como Mercedes-Benz (1926), DaimlerChyrsler (1998), atualmente como Daimler AG (matriz Alemanha) e Mercedes-Benz do Brasil Ltda., e que permanece fortalecida e prestigiada no seu segmento, de acordo com os n��meros e informa����es apresentadas, ratificadas por profissionais do setor automotivo e especialistas em luxo. Faz parte deste estudo abordar a forma e o significado da marca, representada por sua logomarca em toda a sua trajet��ria: esbo��o inicial, mudan��as e desenho atual (parte gr��fica) bem como as mensagens transmitidas e comunica����o com o mercado. A metodologia consiste em realizar um levantamento bibliogr��fico por meio de: publica����es, peri��dicos, documentos internos, disserta����es e teses, que contenham informa����es sobre a marca Mercedes-Benz desde o seu momento inicial at�� o atual, visando estabelecer uma compara����o entre os per��odos, sobretudo no cen��rio nacional. O trabalho ir�� tratar o assunto como um estudo de caso, por se tratar de uma an��lise organizacional e gerencial, que compreendem fen��menos contempor��neos inseridos na vida real. O estudo tem como refer��ncia a Comunica����o Integrada de Marketing, como linha de pesquisa e a Comunica����o Especializada, como ��rea de concentra����o.(AU)

Frei Caneca: matriz do jornalismo brasileiro

Analisar a ret��rica constru��da por Frei Caneca e reconstruir seu pensamento comunicacional, argumentando que a atividade desenvolvida na imprensa o credencia como matriz do jornalismo brasileiro, constituem os objetivos desta pesquisa. Trata-se de estudo explorat��rio, apoiado em fontes bibliogr��ficas e documentais, com a inten����o de compreender o contexto hist��rico da ret��rica e do jornalismo brasileiro na ��poca. Para caracterizar o jornalismo praticado por Frei Caneca foi aplicado o m��todo misto quantitativo e qualitativo da an��lise de conte��do. Os resultados indicaram que Frei Caneca, por meio da ret��rica, iniciou a produ����o de um jornalismo argumentativo estruturado, pois seus textos tinham base te��rica. Desta maneira, contribuiu para o avan��o dos estudos de Teoria do Jornalismo ao fazer uma leitura brasileira da ret��rica e da eloqu��ncia.

O BANCO MUNDIAL E A EDUCA����O NO BRASIL: ESTUDO REALIZADO A PARTIR DAS TESES DEFENDIDAS NA UNIVERSIDADE ESTADUAL DE CAMPINAS (UNICAMP), NO PER��ODO DE 1995 A 2007

Este estudo visa analisar as interferencias do Banco Mundial na Educacao Brasileira a partir do estudo de seis teses (aqui identificadas pelas iniciais A,B,C, D, E e F) de doutorado relativas ao tema, defendidas na Universidade Estadual de Campinas (Unicamp), sendo quatro delas (A, B, C, e D) voltadas a area de educacao e duas (E e F) a area de Ciencias Sociais e Economia. O estudo das teses parte dos objetivos de cada uma, que podem ser resumidos da seguinte forma: a Tese A - ����A Mundializacao da Educacao: o Projeto Neoliberal de Sociedade e de Educacao no Brasil e na Venezuela. (MELO, 2003) -, sob a orientacao do Prof. Dr. Nilson Joseph Demange, teve como objetivo investigar o processo de mundializacao da educacao como elemento de uma nova fase de internacionalizacao e acumulacao capitalista, conduzida hegemonicamente pelos sujeitos politicos coletivos que assumem o projeto neoliberal de sociabilidade, especialmente o Fundo Monetario Internacional e o Banco Mundial, que buscam ser condutores das reformas estruturais para a America Latina e Caribe; a Tese B . ����O Capital Financeiro e a Educacao no Brasil. (DEITOS, 2005) -, sob a orientacao da Profa. Dra. Maria Elizabete Sampaio Prado Xavier, teve como objetivo definir quais as consequencias da consolidacao do projeto, para a redefinicao das politicas educacionais na America Latina e Caribe; a Tese C . ����Globalizacao e Descentralizacao: o Processo de Desconstrucao do Sistema Educacional Brasileiro pela Via da Municipalizacao. (ROSAR, 1995) -, sob a orientacao do Prof. Dr. Demerval Saviani, teve como objetivo analisar as reformas educacionais empreendidas no Brasil, no periodo de 1995-2002, particularmente a politica educacional nacional para o ensino medio e profissional, com financiamento externo do Banco Internacional para Reforma e Desenvolvimento (BIRD); a Tese D . ����As Politicas Educacionais para o Desenvolvimento e o Trabalho Docente. (SOUZA, 1999) ., sob a orientacao da Profa. Dra. Liliana Rolisen Petrilli Segnini, trata da politica educacional para o ensino de 1���� grau, tracada segundo a visao de seu autor no ambito de projetos federais, com o objetivo de induzir a municipalizacao do ensino, transferindo encargos para o municipio, sem a realizacao de investimentos financeiros satisfatorios nessa instancia; a Tese E . ����Economia, poder e influencias externa: O Grupo Banco Mundial e as Politicas de Ajustes Estruturais na America Latina, nas Decadas de Oitenta e Noventa. (COELHO, 2002) ., sob a orientacao do Prof. Dr. Sebastiao Carlos Velasco e Cruz, teve como objetivo analisar as relacoes entre o projeto educacional implementado pelo governo estadual, no periodo entre 1995 e 1998 e suas concepcoes de politicas educacionais; a Tese F - ����A Questao Social e os Limites do Projeto Liberal no Brasil. (GIMENES, 2007) ., sob a orientacao do Prof. Dr. Carlos Alonso Barbosa de Oliveira, teve como objetivo analisar a relacao entre a economia, o poder politico e a influencia externa, focalizando o Grupo Banco Mundial e os programas de ajustamento estrutural na America Latina. Por fim este estudo mescla teses brasileiras advindas da area da Educacao e da Economia; foca o banco mundial e sua influencia no Brasil, oferecendo uma visao das conexoes logicas existentes entre elas. Como conclusao deste trabalho, apresentaremos as consideracoes finais de cada uma das teses, bem como as limitacoes e sugestoes para

Cen��rio da produ����o acad��mica em hist��ria da matem��tica no ensino de matem��tica: uma an��lise reflexiva das teses e disserta����es (1990-2010)

This research aims to make a reflective analysis about the academic production originated in the stricto sensu post graduation programs in the country, produced in the period of 1990 to 2010, in the field of History of Mathematics, especifically on works about the History of Mathematics in Mathematics education and that present pedagogical proposals that make use of the History of Mathematics in order to teach Mathematics. Defending the thesis that the researches on mathematics education with goals turned to the use of didactic proposals related to the history of mathematic that take in consideration the coherency between epistemological aspects inherent to mathematics history and anthological elements materialized on the conceptions of mathematics and mathematics history and of apprenticeship (implicitly or explicitly exposed) may originate significant contribution to the field of history of mathematics on education. Among these, nine were Master���s Degree dissertations and five PHD���s theses. The reflective analysis was accomplished from two matrixes; one from theoretical nature and the other, ontologic nature, elaborated from the pretexts of Sanches Gamboa, about the epistemological analysis from academic production in the field of Mathematics Education and the following theoretical perspectives in the field of History of Mathematics Education, that are: linear evolutionary theory, structural construtivist operative, evolutionary discontinuous, historical and socialcultural investigation and the use of activities estimulating the usage of verbal and nonverbal expressions. These perspectives were based on the works of Miguel and Miorim, Mendes and Radford. As results, we have detected some established dissonances between the categories related to theoretical and ontologic levels and the pedagogical proposal presented in these researches. On the other hand, we have discovered works that are able to establish consonances between the theoretical and ontological elements and the presented pedagogical proposal. These works carry significative contributions to the field of History of Mathematics applied to Mathematics pedagogical practice, inclusively presenting significative theoretical elements to the production of knowledge recognized as scientific in the Mathematics field

Resumo de disserta����es e teses: a estrutura composicional �� luz da An��lise Textual dos Discursos

This doctoral dissertationproposes the description, interpretation and analysis of the compositional structure of thesis and dissertation abstracts, with regard to the linguistic mechanisms that evidence text zones of different typological sequences, such as those of the text plan. Along these lines, the research problem was developed from the notion of compositional structure (sequences and text plans), as one of the levels or plans of text analysis, according to the theoretical framework proposed by Jean-Michel Adam (2011a). The main objective of this study was to recognize how the compositional structure, of thesis and dissertation abstracts, is achieved, with respect to text units and the global organization of this text category. The hypothesis posed in this research posits that specific informational text composition categories of abstracts are necessary to process the representation of the original text and the way in which it makes its meaning. Subsequently, this study is based on the theoretical and methodological framework of Text Linguistics (TL) and, above all, Textual Discourse Analysis (TDA), as we endeavor to understand the organizational structure of abstracts from both a linguistic and textual perspective. This structure involves the text plan of abstracts, with respect to their communicative purpose, i.e, the sharing of scientific information in its standard textual form. Thus, the development of this study, from a theoretical and methodological perspective, is based on the theoretical and descriptive premises from TDA (ADAM, 2011a, 2012; PASSEGGI et al., 2010), and also from TL (BEAUGRANDE; DRESSLER, (2012 [1981]); COSERIU; LAMAS (2010); MARCUSCHI, 2009 [1983]; F��VERO; KOCH, 1994;KOCH, 2006; BENTES, 2004; BENTES; LEITE, 2010), within the field of text studies. The methodology of this study relies on empirical, documental research, which is qualitative, and adopts a descriptive and interpretive approach. From the empirical perspective, our objective is to understand the problems pertaining to the textual composition of abstracts, aiming to elucidate them in light of the theoretical and methodological framework previously mentioned. The corpus of the analysis is comprised of seven abstracts designated for systematic data collection. These texts, written between 2004 and 2011,were selected from Master���s theses and Doctoral dissertations in their electronic version, from the graduate program at the Federal University of Rio Grande do Norte. A thorough review of the literature reveals a clear fluctuation in the terminology of the concept, ���abstract���. The results of the analysis revealed that the abstracts, which comprise the corpus of analysis in this study, in general, present typological heterogeneity, while the text plan remains fixed. Finally, the new knowledge gained in this research contributes both to the understanding of the compositional structure of abstracts as well as their production.

Obten����o e caracteriza����o de um comp��sito polim��rico de matriz poli��ster e refor��o/carga de tecido plano de algod��o

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

Obten����o e caracteriza����o de um comp��sito polim��rico de matriz poli��ster e refor��o/carga de tecido plano de algod��o

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

Obten����o e caracteriza����o de um comp��sito de matriz polim��rica com carga de res��duos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m�� for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Obten����o e caracteriza����o de um comp��sito de matriz polim��rica com carga de res��duos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m�� for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Implementa����o de uma matriz de neur��nios dinamicamente reconfigur��vel para descri����o de topologias de redes neurais artificiais multilayer perceptrons

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Implementa����o de uma matriz de neur��nios dinamicamente reconfigur��vel para descri����o de topologias de redes neurais artificiais multilayer perceptrons

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Obten����o, caracteriza����o e utiliza����o de um comp��sito com matriz de resina poli��ster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Obten����o, caracteriza����o e utiliza����o de um comp��sito com matriz de resina poli��ster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Obten����o e caracteriza����o de um comp��sito de matriz polim��rica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm�� (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm��, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.

Obten����o e caracteriza����o de um comp��sito de matriz polim��rica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm�� (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm��, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.