Validation of stress indicators for the assessment of animal welfare and prediction of pork meat quality variation at commercial level

Les procédures appliquées avant l’abattage des animaux influencent directement la qualité de la viande en modulant l’état physiologique des porcs; ainsi, l’augmentation de la température corporelle, les taux élevés de lactate sanguin et l’épuisement des réserves de glycogène entre autres, occasionnent la majorité des baisses de qualité. L’objectif de cette thèse était de valider des outils indicateurs de stress porcin pour les fermes et les abattoirs. Ceux-ci seraient appliqués à la surveillance du bien-être animal et à la prédiction de variation de qualité de la viande porcine au niveau commercial. Premierement, les résultats de la thèse ont permis de conclure qu’un des outils développés (analyseur portatif de lactate) mesure la variation du niveau de lactate sanguin associé à l’état physiologique des porcs dans la phase péri-mortem et aide à expliquer la variation de la qualité de la viande chez le porc à l’abattoir, en particulier dans les muscles du jambon. Deuxièmement, les résultats des audits du bien-être animal appliqués de la ferme à l’abattoir ont démontré que la qualité du système d’élevage à la ferme d’origine et les compétences du chauffeur de camion sont d’importants critères affectant la réponse comportementale des porcs à la manipulation avant l’abattage. Ces résultats ont également démontré que les conditions de logement à la ferme (la faible densité et l’enrichissement dans les enclos), le comportement des porcs en période pré-abattage (glissade), ainsi que les interventions du manipulateur (utilisation du bâton électrique) dans la zone d’étourdissement de l’abattoir affectent négativement la variation de la qualité de la viande. L’application des protocoles d’audits dans la filière porcine a également démontré que le respect des critères de bien-être animal fixés par un outil de vérification est primordiale et permet de contrôler les conditions de bien-être des porcs à chaque étape de la période pré-abattage, de produire une viande de qualité supérieure et de réduire les pertes. Les audits de bien-être animal sont donc un outil qui apporte des resultats très pertinents pour aider a éviter les variations de la qualité de la viande chez le porc. Troisièmement, la thermographie infrarouge s’est avéré être une technique prometteuse permettant d’évaluer la variation de température corporelle de l’animal pendant et après un stress physique, en particulier lorsque cette mesure est prise derrière les oreilles. En conclusion, les outils validés à travers cette thèse représentent des méthodologies non invasives et potentiellement complémentaires à d’autres approches d’évaluation de l’état physiologique et du bien-être animal par rapport au stress, permettant de réduire les pertes de qualité de viande (par exemple en utilisation conjointe avec le niveau de lactate sanguin et les indicateurs de stress comportemental, entre autres).

A PRELIMINARY SURVEY OF ANIMAL HANDLING AND CULTURAL SLAUGHTER PRACTICES AMONG KENYAN COMMUNITIES: POTENTIAL INFLUENCE ON MEAT QUALITY

Kenya is composed of over 40 ethnic communities who practice varied methods of animal handling and slaughter. Socio-cultural and religious traditions have the potential to influence animal handling and slaughter practices. These influences have, however, not been documented in the literature as far as the author is aware. Also, the literature has documented the connection between the manner of animal treatment and meat quality, but this is rarely discussed in the literature in Kenya; this connection is important as it informs modern meat trade practices by Kenyans as they trade in the global arena. This survey aimed to mainly establish and document the animal slaughter practices among Kenyan communities, and, to also highlight any current provisions related to meeting modern animal welfare requirements, animal handling procedures in the meat trade and discuss their potential influence on meat quality available in commerce in Kenya. This preliminary study surveyed the slaughter practices among 10 different Kenyan communities through a semi-structured questionnaire, focus group discussions and individual interviews. The survey demonstrated that different Kenyan communities practice varied methods of animal slaughter depending on whether the animal being slaughtered is for public feasting, domestic consumption or commercial merchandizing. The Kenyan communities surveyed in this study depend mainly on males to slaughter livestock for females preparing it for domestic use using a number of instruments and methods. For small stock for domestic consumption, females may slaughter the animal except for Muslims whose males have to slaughter the animal with a special knife (a Khalef) according to Muslim rites to render it Halal. Large stock is invariably slaughtered by males irrespective of the community, and the manner of use of the carcass. Gender, age, religion, community and the size of the animal were the major determinants of the method of animal slaughter. The animal welfare issues highlighted in the survey and related to the handling and slaughter of livestock have important implications for meat quality during commercial merchandizing. There is an apparent need to provide education to herders, livestock handlers, employees and management in the livestock industry in Kenya on the relationship between animal welfare requirements, animal handling procedures and meat quality. Such awareness can potentially improve the quality and economic value of the meat available in commerce.

The role of combinations between fasting intervals and lairage times on pigs welfare, stomach content and carcass and meat quality.

2016

Genomic structure and marker-derived gene networks for growth and meat quality traits of brazilian nelore beef cattle.

Nelore is the major beef cattle breed in Brazil with more than 130 million heads. Genome-wide association studies (GWAS) are often used to associate markers and genomic regions to growth and meat quality traits that can be used to assist selection programs. An alternative methodology to traditional GWAS that involves the construction of gene network interactions, derived from results of several GWAS is the AWM (Association Weight Matrices)/PCIT (Partial Correlation and Information Theory). With the aim of evaluating the genetic architecture of Brazilian Nelore cattle, we used high-density SNP genotyping data (~770,000 SNP) from 780 Nelore animals comprising 34 half-sibling families derived from highly disseminated and unrelated sires from across Brazil. The AWM/PCIT methodology was employed to evaluate the genes that participate in a series of eight phenotypes related to growth and meat quality obtained from this Nelore sample.

Estratègies prèvies al sacrifici que poden afectar el benestar animal i la qualitat de la carn de porcs de diferent genotip RYRI

The main objective of this thesis was to study (i) the effect of the fasting and lairage on carcass and technological meat quality and (ii) the inclusion of magnesium (MgCO3 and MgSO4) and/or tryptophan during 5 days before slaughtering pigs as a strategy to decrease stress levels and improve meat quality, with two different porcine RYR1 genotypes (NN and nn). An adequate combination of fasting and lairage period is recommended. A supplement of MgCO3 or Trp did not improve meat quality under minimal stressful ante mortem conditions; and MgSO4 had a laxative effect on pigs supplemented with it. When including nn pigs to the herd, it is recommended to consider the supplements’ combination of tryptophan and a source of Mg (avoiding MgSO4) to alleviate the negative effect of the stress and to improve technological meat quality.

Breed effect on quality veal production in mountain areas: Emphasis on meat

This study was designed to compare the quality of veal produced from ‘Tudanca x Charolais’ cross (n=6) and Limousin (n=6) breeds when allowed to feed freely on mountain pastures and suckle naturally from birth to 7 months of age. After 80 days of age calves also had access to concentrate (maximum of 3 Kg/day), while mothers did not. At slaughter, Limousin calves were heavier (P<0.01) and provided better carcass yield (P<0.05) and conformation (P<0.001) than Tudanca calves. Tudanca beef provided higher fat content (P<0.05) was less tough (P<0.05), and was scored as more tender and juicy (P<0.1) with higher acceptability than Limousin beef (P<0.1). In general, Tudanca had a better fatty acid profile than Limousin beef, especially in terms of the content of polyunsaturated (P<0.05), long-chain polyunsaturated fatty acids (P<0.05) and their n-6/n-3 ratios (P<0.1), as well as vaccenic acid (P<0.1) and the overall trans-18:1 isomer profile.

Methods of discard ewes carcass suspension and the quality of meat

Objetivou-se com este trabalho avaliar o método de pendura da carcaça quanto à qualidade da carne ovina. Foram utilizadas 10 ovelhas de descarte com aproximadamente 62 kg de peso corporal. Após abate, esfola, evisceração e retirada da cabeça e das patas, as carcaças foram divididas longitudinalmente em duas partes. Lados alternados das meias carcaças foram pendurados pelo tendão do gastrocnêmico, tratamento 1 (T1) e suspensos pelo osso pélvico (T2) por um período de 24 horas em câmara frigorífica. Posteriormente retirou-se o músculo Semimembranosus de todas as meias carcaças para as análises de qualidade da carne. Os músculos Semimembranosus das carcaças pendurados pelo método de suspensão da pelve apresentou maior maciez que os mesmos músculos das carcaças pendurados pelo tendão do gastrocnêmico, com valores de 1,99 kgf.cm-2 e 3,15 kgf.cm-2, respectivamente. O tratamento 2 obteve menores perdas por cocção da carne que o tratamento 1, com valores médios de 32,14 e 33,44%, respectivamente. Os demais parâmetros de qualidade de carne avaliados não foram influenciados pelo método de suspensão da carcaça. Concluiu-se que o método de suspensão da carcaça, influenciou a maciez e as perdas por cocção da carne, sendo os melhores resultados para as carcaças penduras pelo osso pélvico.

Effects of age at slaughter and sire genotype on fatness, muscularity, and the quality of meat from ram lambs born to Romney ewes

Ram lambs (n = 356) born to Romney ewes and sired by a range of straightbred or crossbred sires were evaluated for carcass composition and, for a subsample (n = 236), some meat quality characteristics over a period of 4 years. Within each year, 2 to 4 sire genotypes, including Romney controls, were evaluated at 2 slaughter ages (5-9 months and 10-11 months). Weight-adjusted carcass length was greater for lambs with some East Friesian or Finn genes, but no differences were found in dressing-out percent. At a constant carcass weight, carcass fatness (fat depths and leg dissectible fat) was lower in lambs with East Friesian, Texel, or Finn genes. Meat yield at a constant weight tended to be greatest in sire groups that were least fat, and M:B ratio in the femur region was highest in lambs with Texel genes and, to a lesser extent, those with Poll Dorset genes. Leg muscularity in the femur region generally paralleled differences in M:B, except in a comparison of East Friesian-cross and Romney lambs where the former had lower muscularity but slightly better M:B. Lambs slaughtered at the older age for each year had longer and leaner carcasses at the same weight, possibly because they had been taken part way through a winter or because of slower growth rates leading up to slaughter. Meat quality characteristics differed little between the genotype groups, but for 2 of 3 years, meat from the semimembranosus muscle of lambs in the older slaughter lot was significantly tougher.

Expression of genes related to quality of Longissimus dorsi muscle meat in Nellore (Bos indicus) and Canchim (5/8 Bos taurus×3/8 Bos indicus) cattle

This study was performed to compare CAPN1, CAPN2, CAST, TG, DGAT1 and LEP gene expressions and correlate them with meat quality traits in two genetic groups (Nellore and Canchim) in order to assess their expression profile and use their expression profile as genetic markers. We analyzed 30 young bulls (1. year old), 15 of each genetic group. Samples of the Longissimus dorsi muscle were collected for analysis of: total lipids (TL) and meat tenderness measured as Warner-Bratzler shear force (SF) and myofibrillar fragmentation (MFI) at day of slaughter and 7. days of aging. Gene expression profiles were obtained via RT-qPCR. TL and MFI showed differences between breeds, higher MFI in Canchim and higher TL in Nellore. Calpains showed no differential expression between groups, as did DGAT1, TG, and LEP. CAST was expressed more in the Nellore cattle. The only significant within-breed correlation (0.79) between gene expression and meat traits was found for DGAT1 and MFI in Canchim breed. Although the number of animals used in this study was small, the results indicate that the increased expression of CAST in Nellore may reflect tougher meat, but the lack of correlations with the meat traits indicates it is not a promising genetic marker. © 2013 Elsevier Ltd.

Vitamin C prevents the effects of high rearing temperatures on the quality of broiler thigh meat

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fatty acid profile, carcass and quality traits of meat from Nellore young bulls on pasture supplemented with crude glycerin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Farming and processing factors for improving quality properties of poultry and rabbit meat

Recently, global meat market is facing several dramatic changes due to shifting in diet and life style, consumer demands, and economical considerations. Firstly, there was a tremendous increase in the poultry meat demand. Furthermore, current forecast and projection studies pointed out that the expansion of the poultry market will continue in future. In response to this demand, there was a great success to increase growth rate of meat-type chickens in the last few decades in order to optimize the production of poultry meat. Accordingly, the increase of growth rate induced the appearance of several muscle abnormalities such as pale-soft-exudative (PSE) syndrome and deep-pectoral-myopathy (DPM) and more recently white striping and wooden breast. Currently, there is growing interest in meat industry to understand how much the magnitude of the effect of these abnormalities on different quality traits for raw and processed meat. Therefore, the major part of the research activities during the PhD project was dedicated to evaluate the different implications of recent muscle abnormalities such as white striping and wooden breast on meat quality traits and their incidence under commercial conditions. Generally, our results showed that the incidence of these muscle abnormalities was very high under commercial conditions and had great adverse impact on meat quality traits. Secondly, there is growing market share of convenient, healthy, and functional processed meat products. Accordingly, the remaining part of research activities of the PhD project was dedicated to evaluate the possibility to formulate processed meat products with higher perceived healthy profile such as phosphate free-marinated chicken meat and low sodium-marinated rabbit meat products. Overall all findings showed that sodium bicarbonate can be considered as promising component to replace phosphates in meat products, while potassium chloride under certain conditions was successfully used to produce low marinated rabbit meat products.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.