Peer mentoring in higher education:a multidimensional approach to conceptualising the role of peer mentoring programmes in enhancing the first year undergraduate experience

Across the literature researchers agree that the concept of mentoring results in positive outcomes for both mentors and mentees alike (Enrich et al, 2004). From a pedagogical perspective, student focused mentoring activities in Higher Education are generally perceived to comprise dyadic or triadic relationships that encapsulate a diverse range of learning strategies and/or support mechanisms. Whilst there exists a significant amount of literature regarding the wider value of Peer Mentoring in Higher Education, there remains a notable gap in knowledge about the value of such programmes in enhancing the first year undergraduate experience and thus promoting a smooth transition to University. Using the emergent study findings of a large international project, a multidimensional conceptual framework bringing together the theoretical, conceptual and contextual determinants of Peer Mentoring is proposed. This framework makes a distinctive contribution to current pedagogical theory and practice – particularly in relation to the first year experience.

First-year and second-year snow properties on sea ice in the Weddell Sea during POLARSTERN cruise ANT-XXII/2 (ISPOL) during the drift

Observations of snow properties, superimposed ice, and atmospheric heat fluxes have been performed on first-year and second-year sea ice in the western Weddell Sea, Antarctica. Snow in this region is particular as it does usually survive summer ablation. Measurements were performed during Ice Station Polarstern (ISPOL), a 5-week drift station of the German icebreaker RV Polarstern. Net heat flux to the snowpack was 8 W/m**2, causing only 0.1 to 0.2 m of thinning of both snow cover types, thinner first-year and thicker second-year snow. Snow thinning was dominated by compaction and evaporation, whereas melt was of minor importance and occurred only internally at or close to the surface. Characteristic differences between snow on first-year and second-year ice were found in snow thickness, temperature, and stratigraphy. Snow on second-year ice was thicker, colder, denser, and more layered than on first-year ice. Metamorphism and ablation, and thus mass balance, were similar between both regimes, because they depend more on surface heat fluxes and less on underground properties. Ice freeboard was mostly negative, but flooding occurred mainly on first-year ice. Snow and ice interface temperature did not reach the melting point during the observation period. Nevertheless, formation of discontinuous superimposed ice was observed. Color tracer experiments suggest considerable meltwater percolation within the snow, despite below-melting temperatures of lower layers. Strong meridional gradients of snow and sea-ice properties were found in this region. They suggest similar gradients in atmospheric and oceanographic conditions and implicate their importance for melt processes and the location of the summer ice edge.

Second year Cadets Holly Gwyn, Cookie Florecrul, and Holly Getz at West Point

General note: Title and date provided by Bettye Lane.

Help-seeking behaviors and mental well-being of first year undergraduate university students

University students demonstrate poor help-seeking behaviors for their mental health, despite often reporting low levels of mental well-being. The aims of this study were to examine the help-seeking intentions and experiences of first year university students in terms of their mental well-being, and to explore these students’ views on formal (e.g. psychiatrists) and informal (e.g. friends) help-seeking. Students from a university in the Republic of Ireland (n=220) completed an online questionnaire which focused on mental well-being and help-seeking behaviors. Almost a third of students had sought help from a mental health professional. Very few students reported availing of university/online supports. Informal sources of help were more popular than formal sources, and those who would avail and had availed of informal sources demonstrated higher well-being scores. Counselors were the source of professional help most widely used. General practitioners, chaplains, social workers, and family therapists were rated the most helpful. Those with low/average well-being scores were less likely to seek help than those with higher scores. Findings indicate the importance of enhancing public knowledge of mental health issues, and for further examination of students’ knowledge of help-seeking resources in order to improve the help-seeking behaviors and mental well-being of this population group.

(MIS)PERCEIVED DRINKING NORMS AND HAZARDOUS DRINKING BEHAVIOURS IN UNIVERSITY FIRST-YEAR UNDERGRADUATE STUDENTS AND THE EFFECTS OF GENDER

Purpose: Across Canada, undergraduate university students are one of the highest alcohol-consuming populations. Many students engage in hazardous drinking and are at risk for negative health and social consequences. Social Norms Theory suggests that students’ overestimation of drinking norms can result in an increase in their drinking behaviour. As of yet, none of the literature addresses the possible link between drinking norm (mis)perception and hazardous drinking in a Canadian undergraduate context. This is the first Canadian study to examine this potential association in first-year undergraduate students across multiple universities using gender as an effect modifier. Methods: Using data collected by the Caring Campus Project, for 2347 first-year students from three Canadian universities, I evaluated the prevalence of drinking norm misperceptions by site and gender. Using multiple-logistic regression models, I analyzed the relationship between misperceived drinking norms and hazardous drinking behaviours (assessed via AUDIT-C). Results: The proportion of students who overestimated drinking and binge drinking frequency norms varied by site and gender. There was a positive relationship between overestimated drinking/ binge drinking frequency norms and hazardous drinking, modified by gender. Controlling for living arrangement and site, the odds of female students being hazardous drinkers increased by a factor of 2.27 (CI: 1.73-2.99) when the drinking frequency norm was overestimated. A non-significant association was found for male students. Among female students, when living arrangement and site were controlled, the odds of being a hazardous drinker were 1.83 (0.84-3.95) and 2.69 (1.24-5.83) times greater when the drinking frequency norm was perceived at “2-4 times per month” and “2 or more times per week”, respectively. Among male students, when living arrangement, previous residence and site were controlled, the odds of being a hazardous drinker were 4.03 (2.62-6.19) and 8.54 (5.41-13.49) times greater when the binge drinking frequency norm was perceived at “2-4 times per month” and “2 or more times per week”, respectively. Conclusion: This novel study enhances the understanding of the association between (mis)perceived drinking norms and drinking behaviours in Canadian undergraduate students. The demonstrated importance of gender and site provides a strong impetus for Canadian universities to develop targeted alcohol reduction interventions.

Factors affecting transition to second year of an engineering degree

Much research has focused on students’ transition from secondary school to university. Less is known about the transition from first to second year of a university degree programme. Given the difficulties that many students face at this stage of their education, research into the relevant factors is required. Through questionnaires and focus groups, views of second- and third-year aerospace and mechanical engineering students in our university have been gathered. A large majority believed that both the volume and difficulty of work increased in second year. Many stated that first year was slightly too trivial and could have been made more challenging to prepare them better for second year. Different teaching and assessment styles in second year were considered to affect attendance and performance. The survey revealed that students were generally very well settled into university life by the end of first year and were happy with their choice of course and only 23% reported that financial responsibilities have had a negative effect on their academic performance. Differences were observed between male and female students. Male students believed that transition was helped by having regular assessments and by worked examples in lectures. Females found the teaching staff were the most helpful factor for a successful transition. The results indicate that males require more structure and guidance whereas females are more independent and settle in better.

Residential schools in a first-year undergraduate engineering programme

BACKGROUND OR CONTEXT: For over 20 years, Deakin University has delivered an accredited undergraduate engineering course by means of distance education. Prior to 2004, off-campus students were not required to attend classes in person on campus. The course was designed so that the off campus students were able to undertake all study and assessment tasks remotely from the university campus. Offering accredited domestic undergraduate engineering courses via distance education has been seen as an important strategy for helping to provide graduate domestically educated engineers to meet Australia’s current and future needs. From 2000 the Australian accreditation management system for professional engineers, as managed by Engineers Australia, has increased its scrutiny of accredited domestic undergraduate engineering courses that were provided in distance-education mode. This led to a series of policies and recommendations for Australian universities that offer accredited engineering courses in distance-education mode: one of the recommendations was that off campus
enrolled engineering students should periodically attend some campus-based activities throughout the course. During the 2004 accreditation review of engineering courses at Deakin University, the
accreditation panel requested that mandatory campus-based activities be incorporated into the accredited undergraduate engineering course. Specifically the request was that Deakin mandate that all off-campus students enrolled in an accredited undergraduate engineering course provided by university attend in person a residential school at least once during every year of equivalent full-time study load. The accreditation panel suggested a program model for the residential school component of the course as developed by the University of Southern Queensland.
PURPOSE OR GOAL: This paper describes the development of the mandatory residential school component of accredited distance education undergraduate engineering courses at Deakin University with
a particular focus on how the residential school program is implemented at level 1 (first-year full-time equivalent level) of the courses.
APPROACH: To be compliant with accreditation requirements, since 2005 Deakin has conducted residential schools for off-campus students at its Geelong Waurn Ponds Campus. Initially the schools were conducted annually over two-weeks during the first semester, and have transitioned to the current mode where the residential school is conducted as a one week programme in each of the trimesters. During these schools, activities are organised around the respective engineering-course units undertaken by students during the trimester.
DISCUSSION: The minimum requirements for the on-campus components of distance-education-mode accredited engineering courses were developed by Engineers Australia in consultation with members of the Washington Accord (International Education Alliance) and at the time of development, generated considerable debate (Palmer, 2005, 2008). The intended purpose of residential schools was for off-campus enrolled students to have reasonable exposure to a typical “on-the-campus” student experience periodically throughout the course. Elements considered suitable and worthwhile for inclusion in residential school programs included:
• in person engagement with their academic lecturers,
• presentations and interaction with guest speakers from industry,
• industry-based site visits,
• engagement in sole and group-based learning and assessment activities on campus, and
• social interaction with other students.
RECOMMENDATIONS/IMPLICATIONS/CONCLUSION: We have found that advantages to the students who attends a residential school include completing real practical work without the need to assemble their own materials at home, and social engagement with staff and students. Off-campus students leave the residential school with a sense of belonging to a “community”, “one of many doing the same and not the only one”. They have the opportunity to share their often significant professional experience with the generally younger and less experienced on-campus student colleagues. Through this interaction between on-campus and off-campus students, the on-campus students benefit as much as the off-campus students. The disadvantages to the off-campus students is the requirement to travel to Geelong for an extended time, which costs the students both money and time away from work and family. From our experience, we recommend to other institutions starting residential schools of their own that they exploit the mandatory on-campus-presence requirement to enhance learning outcomes, well publicised timetables be available to students before trimester begins (certainly before census date), a standardised academic week during trimester be set for all residential schools, encourage student feedback on the program, and apply a practice of uniformity and consistency in how the programme is managed, especially mandated student attendance. Our residential schools for off-campus-mode students have been running for over 10 years. We have found that the educational and social advantages to the student outweigh the disadvantages.

Educating for change : a case for a pedagogy of desire in design eduation

Despite major inroads in demystifying creativity for the non-design disciplines, there has been very little movement in the design disciplines themselves beyond traditional paradigms. As argued in this paper, this is particularly noticeable in design education where traditional pedagogical approaches persist despite the emergence of new experimental pedagogies and the possibilities and opportunities they offer. In response, this paper describes what is revealed when a ‘pedagogy of desire’ is used as a critical lens to reflect on an experience of developing and implementing a first year interior design program involving first and second year undergraduate interior design and architecture students. Implications drawn from the review are presented and a case made for continuing experimentation and development of a pedagogy of desire for design learning and teaching.

Fresh frozen cadavers as a tool to educate student paramedics in procedural skills

Objectives – To describe the development of an educational workshop to develop procedural skills in undergraduate Paramedic students using fresh frozen cadavers and to report the student’s assessment of the program. Methods – A six-hour anatomy based workshop was developed using fresh frozen cadavers to teach a range of airway and invasive procedural skills to second year undergraduate paramedic students. Embedded QUAN (qual) methodology will be utilised to evaluate the student’s satisfaction, perception and quality of teaching as compared to other existing clinical teaching techniques such as high fidelity simulation. Students will be asked to complete an anonymous validated survey (10 questions formulated on a 5 point Likert scale) and provide a qualitative feedback pre and post the six-hour workshop. Results – This is a prospective study planned for September 2013. Low-risk human research ethics are being sought. Teaching evaluation results from the inaugural 2012 workshop (undergraduate and postgraduate Paramedic students) and interim results for 2013 will be presented. Conclusions – Clinical teaching using fresh frozen cadavers thus far has predominately been used in the education of medical and surgical trainees. A number of studies have found them to be effective and in some cases superior to traditional high fidelity simulation teaching strategies. Fresh frozen cadavers are said to provide perfect anatomy, normal tissue consistency and a realistic operative training experience (Lloyd, Maxwell-Armstrong et al. 2011). The authors believe that this study will show that the use of fresh frozen cadavers offers a safe and effective mode to teach procedural skills to student paramedics that will help bridge the skills gap and increase confidence prior to students undertaking such interventions on living patients. A modified training program may be formulated for general practitioners undertaking Emergency Medicine Advanced Rural Skills.

A systematic approach to standard addition methods in instrumental analysis

Nine cases of standard addition methods in instrumental analysis, including linear instruments, a non-linear response, the electrochemical Nernst equation, and radiochemical techniques.

The Design Process- Making It Relevant For Students

Within the ever-changing arenas of architectural design and education, the core element of architectural education remains: that of the design process. The consideration of how to design in addition to what to design presents architectural educators with that most constant and demanding challenge of how do we best teach the design process?

This challenge is arguably most acute at a student's early stages of their architectural education. In their first years in architecture, students will commonly concentrate on the end product rather than the process. This is, in many ways, understandable. A great deal of time, money and effort go into their final presentations. They believe that it is what is on the wall that is going to be assessed. Armed with new computer skills, they want to produce eye-catching graphics that are often no more than a celebration of a CAD package. In an era of increasing speed, immediacy of information and powerful advertising it is unsurprising that students want to race quickly to presenting an end-product.

Recognising that trend, new teaching methods and models were introduced into the second year undergraduate studio over the past two years at Queen's University Belfast, aimed at promoting student self-reflection and making the design process more relevant to the students. This paper will first generate a critical discussion on the difficulties associated with the design process before outlining some of the methods employed to help promote the following; an understanding of concept, personalisation of the design process for the individual student; adding realism and value to the design process and finally, getting he students to play to their strengths in illustrating their design process like an element of product. Frameworks, examples, outcomes and student feedback will all be presented to help illustrate the effectiveness of the new strategies employed in making the design process firstly, more relevant and therefore secondly, of greater value, to the architecture student.