Robust pairwise matching of interest points with complex wavelets

We present a matching framework to find robust correspondences between image features by considering the spatial information between them. To achieve this, we define spatial constraints on the relative orientation and change in scale between pairs of features. A pairwise similarity score, which measures the similarity of features based on these spatial constraints, is considered. The pairwise similarity scores for all pairs of candidate correspondences are then accumulated in a 2-D similarity space. Robust correspondences can be found by searching for clusters in the similarity space, since actual correspondences are expected to form clusters that satisfy similar spatial constraints in this space. As it is difficult to achieve reliable and consistent estimates of scale and orientation, an additional contribution is that these parameters do not need to be determined at the interest point detection stage, which differs from conventional methods. Polar matching of dual-tree complex wavelet transform features is used, since it fits naturally into the framework with the defined spatial constraints. Our tests show that the proposed framework is capable of producing robust correspondences with higher correspondence ratios and reasonable computational efficiency, compared to other well-known algorithms. © 1992-2012 IEEE.

Shape vs. volume: Invariant shape descriptors for 3D region of interest characterization in MRI

We propose a new approach for quantifying regions of interest (ROIs) in medical image data. Rotationally invariant shape descriptors (ISDs) were applied to 3D brain regions extracted from MRI scans of 5 Parkinson's patients and 10 control subjects. We concentrated on the thalamus and the caudate nucleus since prior studies have suggested they are affected in Parkinson's disease (PD). In the caudate, both the ISD and volumetric analyses found significant differences between control and PD subjects. The ISD analysis however revealed additional differences between the left and right caudate nuclei in both control and PD subjects. In the thalamus, the volumetric analysis showed significant differences between PD and control subjects, while ISD analysis found significant differences between the left and right thalami in control subjects but not in PD patients, implying disease-induced shape changes. These results suggest that employing ISDs for ROI characterization both complements and extends traditional volumetric analyses. © 2006 IEEE.

Final report of the Lyme disease review panel of the Infectious Diseases Society of America.

In April 2008, the Infectious Diseases Society of America (IDSA) entered into an agreement with Connecticut Attorney General Richard Blumenthal to voluntarily undertake a special review of its 2006 Lyme disease guidelines. This agreement ended the Attorney General's investigation into the process by which the guidelines were developed. The IDSA agreed to convene an independent panel to conduct a one-time review of the guidelines. The Review Panel members, vetted by an ombudsman for potential conflicts of interest, reviewed the entirety of the 2006 guidelines, with particular attention to the recommendations devoted to post-Lyme disease syndromes. After multiple meetings, a public hearing, and extensive review of research and other information, the Review Panel concluded that the recommendations contained in the 2006 guidelines were medically and scientifically justified on the basis of all of the available evidence and that no changes to the guidelines were necessary.

On-board Robotic Multi-pinhole SPECT System for Region-of-interest (ROI) Imaging

On-board image guidance, such as cone-beam CT (CBCT) and kV/MV 2D imaging, is essential in many radiation therapy procedures, such as intensity modulated radiotherapy (IMRT) and stereotactic body radiation therapy (SBRT). These imaging techniques provide predominantly anatomical information for treatment planning and target localization. Recently, studies have shown that treatment planning based on functional and molecular information about the tumor and surrounding tissue could potentially improve the effectiveness of radiation therapy. However, current on-board imaging systems are limited in their functional and molecular imaging capability. Single Photon Emission Computed Tomography (SPECT) is a candidate to achieve on-board functional and molecular imaging. Traditional SPECT systems typically take 20 minutes or more for a scan, which is too long for on-board imaging. A robotic multi-pinhole SPECT system was proposed in this dissertation to provide shorter imaging time by using a robotic arm to maneuver the multi-pinhole SPECT system around the patient in position for radiation therapy.

A 49-pinhole collimated SPECT detector and its shielding were designed and simulated in this work using the computer-aided design (CAD) software. The trajectories of robotic arm about the patient, treatment table and gantry in the radiation therapy room and several detector assemblies such as parallel holes, single pinhole and 49 pinholes collimated detector were investigated. The rail mounted system was designed to enable a full range of detector positions and orientations to various crucial treatment sites including head and torso, while avoiding collision with linear accelerator (LINAC), patient table and patient.

An alignment method was developed in this work to calibrate the on-board robotic SPECT to the LINAC coordinate frame and to the coordinate frames of other on-board imaging systems such as CBCT. This alignment method utilizes line sources and one pinhole projection of these line sources. The model consists of multiple alignment parameters which maps line sources in 3-dimensional (3D) space to their 2-dimensional (2D) projections on the SPECT detector. Computer-simulation studies and experimental evaluations were performed as a function of number of line sources, Radon transform accuracy, finite line-source width, intrinsic camera resolution, Poisson noise and acquisition geometry. In computer-simulation studies, when there was no error in determining angles (α) and offsets (ρ) of the measured projections, the six alignment parameters (3 translational and 3 rotational) were estimated perfectly using three line sources. When angles (α) and offsets (ρ) were provided by Radon transform, the estimation accuracy was reduced. The estimation error was associated with rounding errors of Radon transform, finite line-source width, Poisson noise, number of line sources, intrinsic camera resolution and detector acquisition geometry. The estimation accuracy was significantly improved by using 4 line sources rather than 3 and also by using thinner line-source projections (obtained by better intrinsic detector resolution). With 5 line sources, median errors were 0.2 mm for the detector translations, 0.7 mm for the detector radius of rotation, and less than 0.5° for detector rotation, tilt and twist. In experimental evaluations, average errors relative to a different, independent registration technique were about 1.8 mm for detector translations, 1.1 mm for the detector radius of rotation (ROR), 0.5° and 0.4° for detector rotation and tilt, respectively, and 1.2° for detector twist.

Simulation studies were performed to investigate the improvement of imaging sensitivity and accuracy of hot sphere localization for breast imaging of patients in prone position. A 3D XCAT phantom was simulated in the prone position with nine hot spheres of 10 mm diameter added in the left breast. A no-treatment-table case and two commercial prone breast boards, 7 and 24 cm thick, were simulated. Different pinhole focal lengths were assessed for root-mean-square-error (RMSE). The pinhole focal lengths resulting in the lowest RMSE values were 12 cm, 18 cm and 21 cm for no table, thin board, and thick board, respectively. In both no table and thin board cases, all 9 hot spheres were easily visualized above background with 4-minute scans utilizing the 49-pinhole SPECT system while seven of nine hot spheres were visible with the thick board. In comparison with parallel-hole system, our 49-pinhole system shows reduction in noise and bias under these simulation cases. These results correspond to smaller radii of rotation for no-table case and thinner prone board. Similarly, localization accuracy with the 49-pinhole system was significantly better than with the parallel-hole system for both the thin and thick prone boards. Median localization errors for the 49-pinhole system with the thin board were less than 3 mm for 5 of 9 hot spheres, and less than 6 mm for the other 4 hot spheres. Median localization errors of 49-pinhole system with the thick board were less than 4 mm for 5 of 9 hot spheres, and less than 8 mm for the other 4 hot spheres.

Besides prone breast imaging, respiratory-gated region-of-interest (ROI) imaging of lung tumor was also investigated. A simulation study was conducted on the potential of multi-pinhole, region-of-interest (ROI) SPECT to alleviate noise effects associated with respiratory-gated SPECT imaging of the thorax. Two 4D XCAT digital phantoms were constructed, with either a 10 mm or 20 mm diameter tumor added in the right lung. The maximum diaphragm motion was 2 cm (for 10 mm tumor) or 4 cm (for 20 mm tumor) in superior-inferior direction and 1.2 cm in anterior-posterior direction. Projections were simulated with a 4-minute acquisition time (40 seconds per each of 6 gates) using either the ROI SPECT system (49-pinhole) or reference single and dual conventional broad cross-section, parallel-hole collimated SPECT. The SPECT images were reconstructed using OSEM with up to 6 iterations. Images were evaluated as a function of gate by profiles, noise versus bias curves, and a numerical observer performing a forced-choice localization task. Even for the 20 mm tumor, the 49-pinhole imaging ROI was found sufficient to encompass fully usual clinical ranges of diaphragm motion. Averaged over the 6 gates, noise at iteration 6 of 49-pinhole ROI imaging (10.9 µCi/ml) was approximately comparable to noise at iteration 2 of the two dual and single parallel-hole, broad cross-section systems (12.4 µCi/ml and 13.8 µCi/ml, respectively). Corresponding biases were much lower for the 49-pinhole ROI system (3.8 µCi/ml), versus 6.2 µCi/ml and 6.5 µCi/ml for the dual and single parallel-hole systems, respectively. Median localization errors averaged over 6 gates, for the 10 mm and 20 mm tumors respectively, were 1.6 mm and 0.5 mm using the ROI imaging system and 6.6 mm and 2.3 mm using the dual parallel-hole, broad cross-section system. The results demonstrate substantially improved imaging via ROI methods. One important application may be gated imaging of patients in position for radiation therapy.

A robotic SPECT imaging system was constructed utilizing a gamma camera detector (Digirad 2020tc) and a robot (KUKA KR150-L110 robot). An imaging study was performed with a phantom (PET CT PhantomTM), which includes 5 spheres of 10, 13, 17, 22 and 28 mm in diameter. The phantom was placed on a flat-top couch. SPECT projections were acquired with a parallel-hole collimator and a single-pinhole collimator both without background in the phantom, and with background at 1/10th the sphere activity concentration. The imaging trajectories of parallel-hole and pinhole collimated detectors spanned 180 degrees and 228 degrees respectively. The pinhole detector viewed a 14.7 cm-diameter common volume which encompassed the 28 mm and 22 mm spheres. The common volume for parallel-hole was a 20.8-cm-diameter cylinder which encompassed all five spheres in the phantom. The maneuverability of the robotic system was tested by navigating the detector to trace the flat-top table while avoiding collision with the table and maintaining the closest possible proximity to the common volume. For image reconstruction, detector trajectories were described by radius-of-rotation and detector rotation angle θ. These reconstruction parameters were obtained from the robot base and tool coordinates. The robotic SPECT system was able to maneuver the parallel-hole and pinhole collimated SPECT detectors in close proximity to the phantom, minimizing impact of the flat-top couch on detector to center-of-rotation (COR) distance. In no background case, all five spheres were visible in the reconstructed parallel-hole and pinhole images. In with background case, three spheres of 17, 22 and 28 mm diameter were readily observed with the parallel-hole imaging, and the targeted spheres (22 and 28 mm diameter) were readily observed in the pinhole ROI imaging.

In conclusion, the proposed on-board robotic SPECT can be aligned to LINAC/CBCT with a single pinhole projection of the line-source phantom. Alignment parameters can be estimated using one pinhole projection of line sources. This alignment method may be important for multi-pinhole SPECT, where relative pinhole alignment may vary during rotation. For single pinhole and multi-pinhole SPECT imaging onboard radiation therapy machines, the method could provide alignment of SPECT coordinates with those of CBCT and the LINAC. In simulation studies of prone breast imaging and respiratory-gated lung imaging, the 49-pinhole detector showed better tumor contrast recovery and localization in a 4-minute scan compared to parallel-hole detector. On-board SPECT could be achieved by a robot maneuvering a SPECT detector about patients in position for radiation therapy on a flat-top couch. The robot inherent coordinate frames could be an effective means to estimate detector pose for use in SPECT image reconstruction.

Relational dimensions of corporate governance in translation: networked governance in China and India

The effectiveness of corporate governance mechanisms has been a subject of academic research for many decades. Although the large majority of corporate governance studies prior to mid 1990s were based on data from developed market economies such as the U.S., U.K. and Japan, in recent years researchers have begun examining corporate governance in transition economies. A comparison of China and India offers a unique environment for analyzing the effectiveness of corporate governance. First, both countries state-owned enterprise (SOE) reform strategies hinges on the Modern Enterprise System characterized by the separation of ownership and control. Ownership of an SOE’s assets is distributed among the government, institutional investors, managers, employees, and private investors. Effective control rights are assigned to management, which generally has a very small, or even nonexistent ownership stake. This distinctive shareholding structure creates conflict of interest not only between management (insiders) and outside investors but also between large shareholders and minority investors. Moreover, because both governments desire to retain some control—in part through partial retained ownership of commercialized SOEs, further conflicts arise between politicians and firms. Second, directors in publicly listed firms in both countries are predominantly drawn from institutions with significant non-market objectives: the government and other state enterprises, particularly in China, and extended families, particularly in India. As a result, the effectiveness of internal governance mechanisms, such as the number of independent directors on the board and the number of independent supervisors on the supervisory committee, are likely to be quiet limited, although this has yet to be fully evaluated. Third, because of the political nature of the privatization process itself, typical external governance mechanisms, such as debt (in conjunction with appropriate bankruptcy procedures), takeover threats, legal protection of investors, product market competition, etc., have not been effective. Bank loans have traditionally been viewed as grants from the state designed to bail out failing firms. State-owned banks retain monopoly or quasi-monopoly positions in the banking sector and profit is not their overriding objective. If political favor is deemed appropriate, subsidized loans, rescheduling of overdue debt or even outright transfer of funds can be arranged with SOEs (soft budget constraints). In addition, a market for private, non-bank debt is limited in India and has yet to be established China. There is no active merger or takeover activity in Chinese stock markets to discipline management. Information available in the capital markets is insufficient to keep at arm’s length of the corporate decisions. In light of the above peculiarities, China and India share many of the typical institutional characteristics as a transition economy, including poor legal protection of creditors and investors, the absence of an effective takeover market, an underdeveloped capital market, a relative inefficient banking system and significant interference of politicians in firm management. Su (2005) finds that the extent of political interference, managerial entrenchment and institutional control can help explain corporate dividend policies and post-IPO financing choices in this situation. Allen et al. (2005) demonstrate that standard corporate governance mechanisms are weak and ineffective for publicly listed firms while alternative governance mechanisms based on reputation and relationship have been remarkably effective in the private sector. Because the peculiarities are significant in this context, the differences in the political-economies of the two countries are likely to be evident in such relational terms. In this paper we explore the peculiarities of corporate governance in this transitional environment through a systematic examination of certain aspects of these reputational and relationship dimensions. Utilising the methods of social network analysis we identify the inter-organisational relationships at board level formed by equity holdings and by shared directors. Using data drawn from the Orbis database we map these relations among the 3700 largest firms in India and China respectively and identify the roles played in these relational networks by the particularly characteristic institutions in each case. We find greatly different social network structures in each case with some support in these relational dimensions for their distinctive features of governance. Further, the social network metrics allow us to considerably refine proxies for political interference, managerial entrenchment and institutional control used in earlier econometric analysis.

The duty of loyalty in the cooperative law. A comparative study

Among the duties of the government bodies’ members of the different entities, which are connected to the good government, the duty of loyalty must be underlined. This duty, derived from the good-faith duty, obliges to act in the interest of the entity in case of conflict of interest, and to subordinate one’s own interests, except when there is an authorisation. Loyalty duty is applicable both to managers, who must manage the entity’s interest, and to partners, according to the common purpose derived from the company contract. This duty, at the same time, includes some particular rules, referred to transparency, remuneration, prohibition of competition, self-contracting... This essay compares the regulation of the duty of loyalty and its realizations in the different Cooperative Laws in Spain, both referring to the managers and to the partners, comparing this, at the same time, with the regulation of these aspects in companies’ general legislation, an in the Spanish Corporate Enterprises Act in particular, in order to obtain a general view of the issue, a necessary basis to go more deeply into it, and suggesting some preliminary conclusions or assessments.

Systemic psychotherapy as an intervention for post-traumatic stress responses: an introduction, theoretical rationale and overview of developments in an emerging field of interest

The purpose of this article is to critically examine the literature to provide a rationale for including systemic family therapy (SFT) in the psycho-social treatment of people suffering the impact of post-traumatic stress (PTS). Attention is drawn to the relatively underdeveloped academic literature on PTS and the family. The impact of PTS is conceptualized within a psycho-social framework and the current evidence base for psycho-social interventions for PTS responses is described, highlighting the opportunity and need to undergird this area of daily practice. The impact of PTS on the family at multiple levels is identified, emphasizing its recursive nature. The case for SFT is articulated and a range of models of family intervention for PTS briefly reviewed, concluding with an emphasis on Walsh's key processes in family resilience as a framework for practice.

Partial shoeprint retrieval using multiple point-of-interest detectors and SIFT descriptors

Shoeprint evidence collected from crime scenes can play an important role in forensic investigations. Usually, the analysis of shoeprints is carried out manually and is based on human expertise and knowledge. As well as being error prone, such a manual process can also be time consuming; thus affecting the usability and suitability of shoeprint evidence in a court of law. Thus, an automatic system for classification and retrieval of shoeprints has the potential to be a valuable tool. This paper presents a solution for the automatic retrieval of shoeprints which is considerably more robust than existing solutions in the presence of geometric distortions such as scale, rotation and scale distortions. It addresses the issue of classifying partial shoeprints in the presence of rotation, scale and noise distortions and relies on the use of two local point-of-interest detectors whose matching scores are combined. In this work, multiscale Harris and Hessian detectors are used to select corners and blob-like structures in a scale-space representation for scale invariance, while Scale Invariant Feature Transform (SIFT) descriptor is employed to achieve rotation invariance. The proposed technique is based on combining the matching scores of the two detectors at the score level. Our evaluation has shown that it outperforms both detectors in most of our extended experiments when retrieving partial shoeprints with geometric distortions, and is clearly better than similar work published in the literature. We also demonstrate improved performance in the face of wear and tear. As matter of fact, whilst the proposed work outperforms similar algorithms in the literature, it is shown that achieving good retrieval performance is not constrained by acquiring a full print from a scene of crime as a partial print can still be used to attain comparable retrieval results to those of using the full print. This gives crime investigators more flexibility is choosing the parts of a print to search for in a database of footwear.

Retrieving Regions of Interest for User Exploration

We consider an application scenario where points of interest (PoIs) each have a web presence and where a web user wants to iden- tify a region that contains relevant PoIs that are relevant to a set of keywords, e.g., in preparation for deciding where to go to conve- niently explore the PoIs. Motivated by this, we propose the length- constrained maximum-sum region (LCMSR) query that returns a spatial-network region that is located within a general region of in- terest, that does not exceed a given size constraint, and that best matches query keywords. Such a query maximizes the total weight of the PoIs in it w.r.t. the query keywords. We show that it is NP- hard to answer this query. We develop an approximation algorithm with a (5 + ǫ) approximation ratio utilizing a technique that scales node weights into integers. We also propose a more efficient heuris- tic algorithm and a greedy algorithm. Empirical studies on real data offer detailed insight into the accuracy of the proposed algorithms and show that the proposed algorithms are capable of computingresults efficiently and effectively.

Assessing and Reporting the Adverse Effects of Antipsychotic Medication: A Systematic Review of Clinical Studies, and Prospective, Retrospective, and Cross-Sectional Research

Objective: Adverse effects (AEs) of antipsychotic medication have important implications for patients and prescribers in terms of wellbeing, treatment adherence and quality of life. This review summarises strategies for collecting and reporting AE data across a representative literature sample to ascertain their rigour and comprehensiveness. Methods: A PsycINFO search, following PRISMA Statement guidelines, was conducted in English-language journals (1980–July 2014) using the following search string: (antipsychotic* OR neuroleptic*) AND (subjective effect OR subjective experience OR subjective response OR subjective mental alterations OR subjective tolerability OR subjective wellbeing OR patient perspective OR self-rated effects OR adverse effects OR side-effects). Of 7,825 articles, 384 were retained that reported quantified results for AEs of typical or atypical antipsychotics amongst transdiagnostic adult, adolescent, and child populations. Information extracted included: types of AEs reported; how AEs were assessed; assessment duration; assessment of the global impact of antipsychotic consumption on wellbeing; and conflict of interest due to industry sponsorship. Results: Neurological, metabolic, and sedation-related cognitive effects were reported most systematically relative to affective, anticholinergic, autonomic, cutaneous, hormonal, miscellaneous, and non-sedative cognitive effects. The impact of AEs on patient wellbeing was poorly assessed. Cross-sectional and prospective research designs yielded more comprehensive data about AE severity and prevalence than clinical or observational retrospective studies. 3 Conclusions: AE detection and classification can be improved through the use of standardised assessment instruments and consideration of subjective patient impact. Observational research can supplement information from clinical trials to improve the ecological validity of AE data.

Laccase-assisted approach to graft multifunctional materials of interest: keratin-EC based novel composites and their characterisation

This study focuses on the evaluation of raw keratin as a potential material to develop composites with novel characteristics. Herein, we report a mild and eco-friendly fabrication of in-house extracted feather keratin-based novel enzyme assisted composites consisting of ethyl cellulose (EC) as a backbone material. A range of composites between keratin and EC using different keratin: EC ratios were prepared and characterised. Comparing keratin to the composites, the FT-IR peak at 1,630 cm-1 shifted to a lower wavenumber of 1,610 cm-1 in keratin-EC which typically indicates the involvement of β-sheet structures of the keratin during the graft formation process. SEM analysis revealed that the uniform dispersion of the keratin increases the area of keratin-EC contact which further contributes to the efficient functionality of the resulting composites. In comparison to the pristine keratin and EC, a clear shift in the XRD peaks was also observed at the specific region of 2-Theta values of keratin-g-EC. The thermo- mechanical properties of the composites reached their highest levels in comparison to the keratin which was too fragile to be measured for its mechanical properties. Considerable improvement in the water contact angle and surface tension properties was also recorded.

Enzymatic grafting: A novel approach to develop multifunctional materials of interest

Today more than 99% of plastics are petroleum-based because of the availability and cost of the raw material. The durability of disposed plastics contributes to the environmental problems as waste and their persistence in the environment causes deleterious effects on the ecosystem. Environmental pollution awareness and the demand for green technology have drawn considerable attention of both academia and industry into biodegradable polymers. In this regard green chemistry technology has the potential to provide solution to this issue. Enzymatic grafting has recently been the focus of green chemistry technologies due to the growing environmental concerns, legal restrictions, and increasing availability of scientific knowledge. Over the last several years, research covering various applications of robust enzymes like laccases and lipases has been increased rapidly, particularly in the field of polymer science, to graft multi-functional materials of interest. In principle, enzyme-assisted grafting may modify/impart a variety of functionalities to the grafted composites which individual materials fail to demonstrate on their own. The modified polymers through grafting have a bright future and their development is practically boundless. In the present study series of graft composites with poly(3-hydroxybutyrate) (P(3HB) as side chain and cellulose as a backbone polymer were successfully synthesised by introducing enzymatic grafting technique where laccase and lipase were used as model catalysts [1-3]. Subsequently, the resulting composites were removed from the casting surface under ambient environment and characterised by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) in detail. Moreover, the thermo-mechanical behaviours of the grafted composites were investigated by differential scanning calorimetry (DSC) and dynamic mechanical analyser (DMA) measurements, respectively. In addition, hydrophobic and hydrophilic characteristics of the grafted polymers were studied through drop contour analysis using water contact angle (WCA). In comparison to the individual counterparts improvement was observed in the thermo- mechanical properties of the composites to varied extent. The tensile strength, elongation at break, and Young’s modulus values of the composites reached their highest levels in comparison to the films prepared with pure P(3HB) only which was too fragile to measure any of the above said characteristics. Interestingly, untreated P(3HB) was hydrophobic in nature and after lipase treatment P(3HB) and P(3HB)-EC-based graft composite attained higher level of hydrophilicity. This is a desired characteristic that enhances the biocompatibility of the materials for proper cell adhesion and proliferation therefore suggesting potential candidates for tissue engineering/bio-medical type applications [3]. The present research will be a first step in the biopolymer modification. To date no report has been found in literature explaining the laccase/lipase assisted grafting of P(3HB) [1-3]. The newly grafted composites exhibit unique functionalities with wider range of potential applications in bio-plastics, pharmaceutical, and cosmetics industries, tissue engineering, and biosensors. [1] H.M.N. Iqbal, G. Kyazze, T. Tron and T. Keshavarz, Cellulose 21, 3613-3621 (2014). [2] H.M.N. Iqbal, G. Kyazze, T. Tron and T. Keshavarz, Carbohydrate Polymers 113, 131-137 (2014). [3] H.M.N. Iqbal, G. Kyazze, T. Tron and T. Keshavarz, Polymer Chemistry In-Press, DOI: 10.1039/C4PY0 0857J (2014).

Three essays on the term structure of interest rates

A PhD Dissertation, presented as part of the requirements for the Degree of Doctor of Philosophy from the NOVA - School of Business and Economics

The wonders of Niagara : a visit to America's greatest cataract with a description of the points of interest in a region of scenic grandeur and beauty.

Cover title.