817 resultados para Análise da água


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The principal effluent in the oil industry is the produced water, which is commonly associated to the produced oil. It presents a pronounced volume of production and it can be reflected on the environment and society, if its discharge is unappropriated. Therefore, it is indispensable a valuable careful to establish and maintain its management. The traditional treatment of produced water, usualy includes both tecniques, flocculation and flotation. At flocculation processes, there are traditional floculant agents that aren’t well specified by tecnichal information tables and still expensive. As for the flotation process, it’s the step in which is possible to separate the suspended particles in the effluent. The dissolved air flotation (DAF) is a technique that has been consolidating economically and environmentally, presenting great reliability when compared with other processes. The DAF is presented as a process widely used in various fields of water and wastewater treatment around the globe. In this regard, this study was aimed to evaluate the potential of an alternative natural flocculant agent based on Moringa oleifera to reduce the amount of oil and grease (TOG) in produced water from the oil industry by the method of flocculation/DAF. the natural flocculant agent was evaluated by its efficacy, as well as its efficiency when compared with two commercial flocculant agents normally used by the petroleum industry. The experiments were conducted following an experimental design and the overall efficiencies for all flocculants were treated through statistical calculation based on the use of STATISTICA software version 10.0. Therefore, contour surfaces were obtained from the experimental design and were interpreted in terms of the response variable removal efficiency TOG (total oil and greases). The plan still allowed to obtain mathematical models for calculating the response variable in the studied conditions. Commercial flocculants showed similar behavior, with an average overall efficiency of 90% for oil removal, however it is the economical analysis the decisive factor to choose one of these flocculant agents to the process. The natural alternative flocculant agent based on Moringa oleifera showed lower separation efficiency than those of commercials one (average 70%), on the other hand this flocculant causes less environmental impacts and it´s less expensive

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The water being vital natural resource and factor of economic and social development requires effective management and protection by the State. This thesis examines the panorama of National Water Resources Policy and the establishment of an effectively integrated management, shared and participative, contextualizing the principles foreseen in the policy. The work is focused on the discussion of public policies of access to water, analyzing the Fresh Water Program in semi-arid region of Brazil as a strategy of coexistence and permanence of a public policy that ensures the priority use, which is for human consumption. The conceptual framework of this study relies primarily on the contributions of authors in the field recognized as governance and water management. A study on the process of implementation of the various "institutions and policies" related to water management was promoted, contextualizing the change of paradigm in the transition from the centralized model to the one that takes into account the social participation, opening in this way broader perspectives for the analysis of the contents and of the impacts of these policies. The development of this study was conducted by the follow-up – both face-to-face as documentary-field – of the activities carried out while consultant of the Fresh Water Program. The history of water management in the semi-arid region was studied, depicting conflict movements and cooperation among actors. Despite the great obstacles to accomplish the shared and decentralized management, the study of this thesis points to a gradual improvement in the formulation of public policies that take into consideration governance and participatory management of water resources, with positive prospects towards the implementation of coordinated and cooperative actions in the region that mainly suffers from the shortage of rainfall, hence of shortage of water for irrigation and human consumption

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The sulfated polysaccharides (SP) from the edible red seaweed Gracilaria birdiae were obtained using five different condition extraction (GB1: Water; GB1p: Water/proteolysis; GB1s: Water/sonication; GB1sp: Water/sonication/proteolysis; GB2s: NaOH/sonication; GB2sp: NaOH/sonication/proteolysis. The yield (g) increased in the following order GB2sp>GB1sp>GB1p>GB2s>GB1s>GB1. However, the amount of SP extracted increased in different way GB2sp>GB1p>GB1>GB1sp>GB1s>GB2s. Infrared and electrophoresis analysis showed that all conditions extracted the same SP. In addition, monosaccharide composition showed that ultrasound promotes the extraction of other polysaccharides than SP. In the prothrombin time (PT) test, which evaluates the extrinsic coagulation pathway, none of the samples showed anticoagulant activity. While in the activated partial thromboplastin time (aPTT) test, which evaluates the intrinsic coagulation pathway, all samples showed anticoagulant activity, except GB2s. The aPTT activity decreased in the order of GB1sp>GB2sp>GB1p>GB1>GB1s>GB2s. Total capacity antioxidant (TCA) of the SP was also affected by condition extraction, since GB2s and GB1 showed lower activity in comparison to the other conditions. In conclusion, the conditions of SP extraction influence their biological activities and chemical composition. The data showed NaOH/sonication/proteolysis was the best condition to extract anticoagulant and antioxidant SPs from Gracilaria birdiae.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The solution of partial differential equation of seepage problems is difficult to find analytically, especially for situations that involve great complexity. To overcome this problem, software based on finite differences and finite elements are usually used. This work presents the use of a finite element software, the GEO5, to solve the seepage problem at a dam of very complex section, the dam Eng. Armando Ribeiro Gonçalves, which at the end of its construction suffered rupture of the upstream slope at the central dam and then went through a process of reconstruction and auscultation. The analyses were performed for the operating condition of the reservoir, with an established flow. A numerical model was developed based on the level readings of the reservoir water and their piezometric readings as a proposal for the evaluation and future behavior prediction of the dam on established flow conditions. The use of constitutive models with the aid of computer systems is reflected in a way to predict future risk situations so they can be prevented

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Garanhuns City, in Pernambuco, undergoes a rapid, polluting and non-organized urban development affecting its freshwater springs around the urban environment. These sources are of great importance to the district as well as to the hydrographic basin of the Mundaú River. In this view, this paper aims at analyzing the socio-environmental problems resulting from the urban expansion surrounding the Garanhuns’ sources. The study considers the social and environmental dynamics and follows the theoretical contributions of socio-environmental geography proposed by Mendonça’s Urban Environmental System methodological and theoretical model (2004), as well as the conceptual values of Santos’ space theory (2002a). The data treatment included bibliographical and documental research, evaluation of environmental impact, and water analysis. It revealed that Garanhuns possesses many local environmental traits favoring the coming out of freshwater springs and that these sources have played an important role in the making and development of that village. The environmental impacts on freshwater springs, like Olho D’água, Bom Pastor, Vila Maria, Pau Amarelo and Pau Pombo have been evaluated through the environmental impact score IIAN. It put alight serious cases of socio-environmental impacts on the dynamics of the freshwater springs. In the period of April 2013 and April 2014, it monitored the superficial water quality expelled by the Pau Pombo, Pau Amarelo e Vila Maria water sources, and the analyses of the contents followed the determinations of the Environmental National Board, whose parameters are dissolved oxygen, biochemical demand of oxygen, nitrate, total coliforms, faecal coliforms, and electrical conductivity. The results recollected suggest the existence of organic pollution and deep alteration in the water coming out from the sources. In consequence, it seems important the putting out of measures destined to stop those impacts and guaranteeing protection and maintenance of the freshwater springs and their micro-basins.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Estresses ambientais abióticos são fatores que causam respostas ao nível molecular, fisiológico e morfológico em plantas, dependendo também de sua intensidade e duração. É visto que algumas espécies apresentam tolerância a condições estressantes e ao mesmo tempo são fontes naturais de matéria prima para indústria. Nesse contexto encontra-se a mamona (Ricinus comunnis L.), principal fonte de óleo de rícino valorizado por suas aplicações farmacêuticas e principalmente industriais, vem sendo usada como cultura em regiões onde a disponibilidade de água é reduzida, usada como fonte de renda para agricultura da região nordeste brasileira. Visto que pouco se sabe sobre as respostas moleculares que levam essa planta a tolerar regiões secas e como as sementes, principais foco de interesse, respondem a essa escassez, nesse trabalho foram construídas duas bibliotecas de cDNAs, onde a partir de uma abordagem subtrativa, continham RNAs diferencialmente expressos em sementes de plantas mamona submetidas ao estresse hídrico durante 5 dias (biblioteca L7), e a outra RNAs diferencialmente expressos em sementes controle (biblioteca L5). A biblioteca L7 apresentou a maior variedade de transcritos com um total de 182. A maior parte das funções estabelecidas pelo sistema Gene Ontology - GO, foram direcionadas aos “Processos Metabólicos” (526), em segundo “Respostas a estímulos” (57), o terceiro termo mais abundante foram referentes a “Desenvolvimento”(26). Já na biblioteca L5, foram encontrados 91 transcritos, com maior parte de suas funções referentes a “Processos Metabólicos”(413), em segundo “Respostas a estímulos” (8) e em terceiro Regulação (6). Alguns dos transcritos da biblioteca L7 foram escolhidos para análise por repetirem-se mais de 3x e não aparecerem na biblioteca L5, o que indica uma possível regulação positiva sobre estresse. As análises sobre Metalotioneína (4x), mostraram que a sequência de proteica apresentava os domínios conservados que a caracterizava como tipo II, onde são encontrados dois domínios funcionais ricos em cisteína com posições altamente conservadas, desempenhando a função de ligar-se a metais pesados, correlacionadas assim como a atividade de eliminação EROs e defesa contra o estresse oxidativo, além de apresentar homologia com a sequência de Bruguiera gymnorhiza, uma planta de mangue adaptada a ambientes salinos. Analisamos também os transcritos da referente a proteína AUXIN-REPRESSED 12.5 KDA (3x), apontada como sendo reprimida pelo hormônio auxina e associada ao processo de dormência da semente, é descrito em uma família gênica onde vários membros pertencem as vias de resposta ao estresse. Por último, analisamos a proteína GLUTELIN TYPE-A 3 (5x), uma importante proteína de armazenamento com caráter hidrofílico, possivelmente direcionada para o vacúolo. Em nosso trabalho foi possível observar um aumento de transcritos em relação a subtração controle, possivelmente reflexo do aumento do metabolismo da semente, tanto para resposta defensiva ao estresse hídrico quanto para o amadurecimento rápido da semente onde foram observados transcritos referentes a resposta oxidativa, controle hormonal, proteínas de reserva e produção de óleo.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The variability / climate change has generated great concern worldwide, is one of the major issues as global warming, which can is affecting the availability of water resources in irrigated perimeters. In the semiarid region of Northeastern Brazil it is known that there is a predominance of drought, but it is not enough known about trends in climate series of joint water loss by evaporation and transpiration (evapotranspiration). Therefore, this study aimed to analyze whether there is increase and / or decrease evidence in the regime of reference evapotranspiration (ETo), for the monthly, annual and interdecadal scales in irrigated polo towns of Juazeiro, BA (9 ° 24'S, 40 ° 26'W and 375,5m) and Petrolina, PE (09 ° 09'S, 40 ° 22'W and 376m), which is the main analysis objective. The daily meteorological data were provided by EMBRAPA Semiárido for the period from 01.01.1976 to 31.12.2014, estimated the daily ETo using the standard method of Penman-Monteith (EToPM) parameterized by Smith (1991). Other methods of more simplified estimatives were calculated and compared to EToPM, as the ones following: Solar Radiation (EToRS), Linacre (EToL), Hargreaves and Samani (EToHS) and the method of Class A pan (EToTCA). The main statistical analysis were non-parametric tests of homogeneity (Run), trend (Mann-kendall), magnitude of the trend (Sen) and early trend detection (Mann-Whitney). The statistical significance adopted was 5 and / or 1%. The Analysis of Variance - ANOVA was used to detect if there is a significant difference in mean interdecadal mean. For comparison between the methods of ETo, it were used the correlation test (r), the Student t test and Tukey levels of 5% significance. Finally, statistics Willmott et al. (1985) statistics was used to evaluate the concordance index and performance of simplified methods compared to the standard method. It obtained as main results that there was a decrease in the time series of EToPM in irrigated areas of Juazeiro, BA and Petrolina, PE, significant respectively at 1 and 5%, with an annual magnitude of -14.5 mm (Juazeiro) and -7.7 mm (Petrolina) and early trend in 1996. The methods which had better for better agreement with EToPM were EToRS with very good performance, in both locations, followed by the method of EToL with good performance (Juazeiro) and median (Petrolina). EToHS had the worst performance (bad) for both locations. It is suggested that this decrease of EToPM can be associated with the increase in irrigated agricultural areas and the construction of Sobradinho lake upstream of the perimeters.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

We propose a mechatronic system for monitoring water quality in rivers, lakes, dams and sea, able to perform the acquisition, processing and presentation of data via the web in real time, in order to facilitate analysis quickly and needs by interested communities. The hardware architecture and software monitoring system has been developed so that it can be generic, that is, supporting different applications. Nevertheless, as a validation of the proposed system, we built a prototype that operates embarked on an autonomous robotic sailboat, a responsible platform for collecting the data in multiple predefined points from a ground station with a planning system navigation. This final application combines the advantages of autonomy of a robotic sailboat with the need for fast and accurate monitoring of water quality, in addition to the use of an autonomous robotic sailboat unmanned facilitate the development of other research in this area.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Contamination of groundwater by BTX has been featured in recent decades. This type of contamination is due to small and continuous leaks at gas stations, causing serious problems to public health and the environment. Based on these antecedents, the search for new alternatives for treating contaminated water is shown to be essential. Therefore, this study aimed to evaluate the efficiency of removal of BTX by adsorption processes employing commercial alumina (Al2O3) and alumina supported with iron (Fe/Al2O3) as adsorbents. It was prepared by a in a synthetic gasoline solution and distilled water to simulate an actual sample. Initially, the adsorbents were characterized by techniques XRD, TG / DTG, XRF, FTIR and SEM/EDS, several trials, where he was placed synthetic solution to react in the presence of Al2O3 and Fe/Al2O3 in a closed, mechanical stirring system were performed varying the catalyst concentration 2, 4 and 6 g.L-1 every 0, 10, 30 60, 90 and 120 min, aliquots were taken and brought to analysis by gas chromatography flame ionization with headspace extraction. The results indicated that the absorbent which has higher BTX removal capacity was the Fe/Al2O3 at a concentration of 6 g.L-1, pH = 4 and time of 90 minutes reaction, resulting in an efficiency, resulting in a 86,5% efficiency for benzene removal, for the 95,4% toluene, 90,8% for ɱ,ρ- xylene and 93.7% for the θ-xylenes. Subsequently, we performed a kinetic study of the reactions, the values of experimental adsorption capacity (qe) showed agreement with the values of the theoretical adsorption capacity (qc) to the pseudo-second-order model in the adsorption tests using 2 and 6 gL-1 of Al2O3 and assays using 2, 4 and 6 g.L-1 of Fe/Al2O3. A fact corroborated by the R2 values, thus indicating that the chemical interactions are present in the adsorption mechanisms of BTX.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Science and technology are increasingly present in society’s everyday living, interfering with the appearance and social relationships, which requires from the population: knowledge, skills and actions to intervene consciously and responsibly in the new socio-cultural setting. The science education might become a great ally in the task of literacy and / or enable students to live consciously and critically in a world even more influenced by scientific and technological aspects. The aim of the dissertation is to develop a didactic-pedagogic proposal for science classes of the 6th year of elementary school, based on the "Generator Theme: Water and its treatment", involving the dynamics of the Three Pedagogic Moments. Such proposal consists of a Course which embraces seven teaching modules containing topics related to Generator Theme. The modules were designed and developed with four student groups of 6th year in twelve hours / class per group, with a total of approximately 120 students. The interpretation of the developed content, resulting from the thematic modules with students, led to the creation of five analysis categories. Considering the results, it is possible to conclude it is necessary, for successful teaching practices in the school environment, that the teachers embrace the aim of teaching in a meaningful way, drawing up activities that really recognize and include the student as an active subject of the educational and learning process. The use of activities that lead students to recognize themselves as main process actors, developing practices based on previous knowledge and on their specific learning, results in a situation which they will recognize the science in their lives, learn to be reflective and aware of their attitudes about the world where they live.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This paper analyses the sustainability under the environmental (ecological) perspective of Water Supply and Sanitary Sewers Systems from Uberaba city, MG. It was accomplished in this analysis, An Environmental Sustainability Assessment of those systems, by the means of specific sustainability indicators proposed for Uberaba, but which may be used for other simi-lar cities. To the characterization of the systems, visitations were made to the main units as well as a documental was elaborated. The definition of the level or stage of the sustainability by the indicators was made based on a literature review, on interviews with the technicians and managers of the systems and based on the characterization and observation of the system reality, being attributed to them the following classification: Non Sustainable, Low Sustaina-bility, Medium Sustainability and High Sustainability. It was verified that the indicators that have lower compatibility to the process of sustainability to the studied systems are those rela-ted to the water physical losses, to the water per capita consumption, to the electricity con-sumption and to the sludge from the water treatment plants disposal untreated into a water body, for the Water Supply System. And those ones related to the attendance with sewage treatment, to the electricity consumption and to the usage of the treated sewage, for the Sani-tary Sewers, all of them classified as Non Sustainable.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Science and technology are increasingly present in society’s everyday living, interfering with the appearance and social relationships, which requires from the population: knowledge, skills and actions to intervene consciously and responsibly in the new socio-cultural setting. The science education might become a great ally in the task of literacy and / or enable students to live consciously and critically in a world even more influenced by scientific and technological aspects. The aim of the dissertation is to develop a didactic-pedagogic proposal for science classes of the 6th year of elementary school, based on the "Generator Theme: Water and its treatment", involving the dynamics of the Three Pedagogic Moments. Such proposal consists of a Course which embraces seven teaching modules containing topics related to Generator Theme. The modules were designed and developed with four student groups of 6th year in twelve hours / class per group, with a total of approximately 120 students. The interpretation of the developed content, resulting from the thematic modules with students, led to the creation of five analysis categories. Considering the results, it is possible to conclude it is necessary, for successful teaching practices in the school environment, that the teachers embrace the aim of teaching in a meaningful way, drawing up activities that really recognize and include the student as an active subject of the educational and learning process. The use of activities that lead students to recognize themselves as main process actors, developing practices based on previous knowledge and on their specific learning, results in a situation which they will recognize the science in their lives, learn to be reflective and aware of their attitudes about the world where they live.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

MELO, Maxymme Mendes de ; PINHEIRO, Andrea Santos ; NASCIMENTO, R. M. ; MARTINELLI, Antonio Eduardo ; DUTRA, Ricardo Peixoto Suassuna ; MELO, Marcus Antônio de Freitas . Análise microestrutural de misturas cerâmicas de grês Porcelanato com adição de chamote de telhas cerâmicas. Cerâmica (São Paulo. Impresso), v. 55, p. 356-364, 2009