Image processing technique to count the number of logs in a timber truck

This paper summarises the results of using image processing technique to get information about the load of timber trucks before their arrival using digital images or geo tagged images. Once the images are captured and sent to sawmill by drivers from forest, we can predict their arrival time using geo tagged coordinates, count the number of (timber) logs piled up in a truck, identify their type and calculate their diameter. With this information we can schedule and prioritise the inflow and unloading of trucks in the light of production schedules and raw material stocks available at the sawmill yard. It is important to keep all the actors in a supply chain integrated coordinated, so that optimal working routines can be reached in the sawmill yard.   

Distribution of logs in a dry sclerophyll forest, Brisbane Ranges, Victoria

Fallen timber is an important habitat resource for small vertebrate and invertebrate animals in forests. This exploratory study investigated the pattern of distribution of fallen timber (here termed 'logs') in a dry sclerophyll forest in the Brisbane Ranges, Victoria, by sampling transects located in
gully, mid-slope and ridge positions, at each of 10 sites. Gullies supported a significantly higher density and volume of logs than ridges. The lowest abundance of logs was on ridges. The mean volume of logs was 98.6 m3/ha for gullies, 38.5 m3/ha at mid-slope positions and 13.1 m3/ha for ridges. The
volume of logs at transects was significantly positively correlated with the density of larger trees (diameter >40 em). A number of animal species in the Brisbane Ranges potentially use logs as a resource for shelter, foraging or perching, and hence the retention ofwoody debris will aid in habitat
management. The uneven distribution of logs in relation to forest topography and the size strueture of trees suggests that gullies, and forest stands with many large trees, are likely to be important habitats for species that use fallen timber. (The Victorian Naturalist 120 (2), 2003, 55-60)

The effect of fabric strain during pressure steaming on fabric dimensional properties

It is shown that tension applied to fabric which is then permanently set by steaming under pressure for a short time has a significant effect on fabric dimensional properties. Increasing levels of stretch applied to fabric before pressure steaming resulted in decreases in fabric hygral expansion and relaxation shrinkage and also lowered fabric shrinkage that resulted from permanent setting. The setting conditions resembled those used in conventional pressure decatising, and it is suggested that in batch decatising, precise control of the length and width of fabric as it is batched up with the wrapper before steaming under pressure could enable predictable changes in fabric dimensions, relaxation shrinkage and hygral expansion to be obtained.

Thermal and mechanical shocks affecting the first flush of production of Lentinula edodes on Eucalyptus saligna logs

O objetivo deste trabalho foi avaliar o efeito do choque térmico e mecânico na produtividade de Lentinula edodes em 140 toras de Eucalyptus saligna, completamente colonizadas pelo fungo, em diferentes tempos de imersão em água e no primeiro fluxo de produção. As toras foram imersas em água resfriada (16ºC) ou à temperatura ambiente (22ºC); os períodos de imersão corresponderam a 6, 10, 14, 18, 22, 26 e 38 horas; o choque mecânico foi acompanhado por três quedas consecutivas da tora, em posição vertical, no chão. A temperatura da água e o tempo de imersão afetaram a produção de L. edodes, resultando em aumentos significativos (2 a 4 vezes) nos tratamentos em que as toras foram submetidas à água resfriada e nos tempos de imersão mais curtos (6 e 10 horas). O choque mecânico não resultou em aumento na produção de basidiomas.

Mineral supplementation and productivity of the Shiitake mushroom on eucalyptus logs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estimativa do tempo de vaporização de toras de Eucalyptus grandis

O objetivo deste estudo foi adequar o modelo geral de determinação do tempo de vaporização de toras, proposto por Steinhagen et al. (1980), para a madeira de Eucalyptus grandis. Para tanto, foram coletadas toras de 20 a <25, de 25 a <30 e de 30 a <35 cm de diâmetro de 14 árvores de E. grandis provenientes do Horto Florestal de Mandurí, SP, pertencente ao Instituto Florestal de São Paulo. em cada uma das toras foi inserido um termopar próximo ao seu centro. Posteriormente, as toras foram vaporizadas a 90 ºC e 100% de umidade relativa, durante 20 horas. Um coletor de dados registrou as temperaturas, no interior do material, durante o tratamento térmico. Conclui-se que o modelo de Steinhagen et al. (1980) não pode ser diretamente aplicado à espécie em estudo, e propõem-se fatores de correções para a utilização do modelo geral de determinação do tempo de vaporização de toras, desenvolvido por Steinhagen et al. (1980), para a madeira de Eucalyptus grandis.

Avaliação do tempo e métodos de aquecimento de toras de Eucalyptus grandis Hill ex-Maiden e sua influência no rendimento em laminação e na qualidade das lâminas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da vaporização na madeira de Eucalyptus grandis sobre as suas propriedades químicas e resistência natural a fungos e cupins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DETERMINATION OF THE E/G RATIO OF WOOD LOGS USING TRANSVERSE VIBRATION

The Bernoulli's model for vibration of beams is often used to make predictions of bending modulus of elasticity when using dynamic tests. However this model ignores the rotary inertia and shear. Such effects can be added to the solution of Bernoulli's equation by means of the correction proposed by Goens (1931) or by Timoshenko (1953). But to apply these corrections it is necessary to know the E/G ratio of the material. The objective of this paper is the determination of the E/G ratio of wood logs by adjusting the analytical solution of the Timoshenko beam model to the dynamic testing data of 20 Eucalyptus citriodora logs. The dynamic testing was performed with the logs in free-free suspension. To find the stiffness properties of the logs, the residue minimization was carried out using the Genetic Algorithm (GA). From the result analysis one can reasonably assume E/G = 20 for wood logs.

Alteration and vein logs of ODP Holes 152-917A and 152-918D

This data report provides a systematic documentation of the low-temperature alteration associated with the formation of a volcanic-rifted margin by the quantification of alteration effects and vein mineralogy and distributions in basalts recovered on Leg 152 (Larsen, Saunders, Clift, et al., 1994, doi:10.2973/odp.proc.ir.152.1994). Basaltic rocks from Holes 917A and 918D have been investigated to provide a quantitative description of the extents of recrystallization and secondary mineral abundance resulting from low-temperature alteration and weathering. Only limited descriptions of alteration and secondary mineral distributions were undertaken on board ship during Leg 152, and the data presented here provide an essential complement to the shipboard logs of the limited amount of basalt recovered during Leg 163 from Sites 988, 989, and 990 (Duncan, Larsen, Allan, et al., 1996, doi:10.2973/odp.proc.ir.163.1996).

PanPlot - software to visualize profiles and core logs

The program PanPlot was developed as a visualization tool for the information system PANGAEA. It can be used as a stand-alone application to plot data versus depth or time or in a ternary view. Data input format is tab-delimited ASCII (e.g. by export from MS-Excel or from PANGAEA). The default scales and graphic features can individualy be modified. PanPlot graphs can be exported in platform-specific interchange formats (EMF, PICT) which can be imported by graphic software for further processing.