Avaliação de um sistema de resfriamento passivo para o clima de Curitiba

Direct evaporative cooling systems (DECS) based on sprinkling water indoors in the form of droplets and indirect evaporative cooling systems (IECS), characterized by the use of wetted roof or wall surfaces for cooling without increasing the indoor air moisture, consist of interesting bioclimatic strategies still not quite explored in Brazil. This study aims to evaluate the use of a particular form of IECS (which combines evaporative cooling and thermal mass brought about by a water reservoir) for indoor thermal control in warm conditions in Curitiba, Two test cells were initially built, monitored and compared to each other: a control module (CM) and an experimental module (EM), the latter provided with an evaporative pond. A subsequent configuration of the system which cancels out the evaporative function of the system and that is solely based on the increase of thermal mass, was tested in a second monitoring round. A third configuration of EM combinig evaporative cooling and the increase of termal mass was tested. Results showed a higher effectiveness of the IECS for the indoor cooling of the tested cells. The average temperature in EM was reduced in 2.5°C and the maximum temperature was reduced in 8.0°C in comparison with the CM. Results also showed a strong relation between the wet-bulb temperature depression and the internal temperature decrease achieved by the evaporative cooling strategy.

Viability of probiotic bacteria and some chemical and sensory characteristics in cornelian cherry juice during cold storage

Background: Increased popularity of vegetarianism, lactose intolerance, and the high cholesterol content in dairy products, are all factors that have recently increased the demand for nondairy probiotic products. The objective of this study is to evaluate the effect of refrigeration on the viability of probiotics and asses someof the chemical and sensory characteristics in cornelian cherry juice. Results: The Iranian native probiotic strain (L. casei T4) showed greater viability compared to industrial types (viable count of 8.67 log cfu/mL versus <6.0 log cfu/mL at d 28). However, this most tolerant Iranian strain, could not withstand the conditions of ‘Natural juice’ at pH 2.6 for more than 7 d. Following a pH adjusted treatment (to pH ~3.5), the viability of the strain was improved to 28 d with some evidence of increased growth of the probiotic. However, the level of antioxidant activity, anthocyanin and phenolic compounds, revealed a slight decrease during cold storage. The changes in the chemical profile of the sample containing L. casei T4 indicated fermentation activity during cold storage. Sensory evaluation results showed significant differences between samples containing L. casei TD4 and other samples in taste, odor and overall acceptance in a complimentary way. Conclusions: The results showed that low pH and presence of inhibitor phenolic compounds of cornelian cherry juice have negative effect on viability of probiotics, especially industrial strains during refrigerated storage.

Análise comparativa de um sistema de refrigeração solar

Nesta dissertação são comparadas duas tecnologias de refrigeração. Uma tecnolo-gia é um sistema que usa a energia elétrica para fazer funcionar um ciclo de com-pressão de vapor, sistema comum em instalações de refrigeração. A outra solução é um sistema de absorção, em que a energia necessária para o funcionamento do sistema é energia térmica obtida através de coletores solares térmicos. Estas tecnologias são estudadas e comparadas para a refrigeração de um arma-zém de produtos agrícolas à temperatura constante de 5ºC para a região de Alque-va, região onde estão a ser desenvolvidos projetos hortofrutícolas a que estão as-sociadas necessidades de preservação dos produtos que envolvem refrigeração e em que a acessibilidade à rede elétrica é reduzida. É mostrado que a tecnologia do sistema de absorção com os coletores se apresenta a médio prazo mais vantajosa em termos económicos e ambientais; Abstract: Comparative analysis of a solar refrigeration system In this dissertation two refrigeration technologies are compared when used for the same objective. One is a technology using the electric energy to operate a vapour compression cycle, commonly used in refrigerated installations. The alternative technology is an absorption system driven by thermal energy, provided by solar thermal collectors. Both technologies are studied and compared for the refrigeration of an agricultural products warehouse at a constant temperature of 5ºC in the Alqueva region, where horticultural projects are being developed with associated needs of preservation of the products involving refrigeration, and where accessibility to the electrical grid is reduced. In the referred conditions it was shown that the absorption technology with collec-tors in the medium term surpasses the usual compression system, both from eco-nomic and environmental viewpoints.

Caracterização da tecnologia de frio comercial e profissional

Hoje em dia a preocupação ambiental e a economia são fatores de sustentabilidade que são tidos em conta em países desenvolvidos, especialmente no seio da União Europeia. Reduzir os consumos de energia é, portanto, um ponto-chave para a redução das emissões de gases com efeito de estufa e aumentar a dependência das energias renováveis. Consequentemente surge então a necessidade de aumentar a eficiência dos equipamentos, em particular no presente caso, equipamentos de refrigeração. Para isso foi adotado pela Comissão Europeia uma rotulagem nos produtos consumidores de energia, em particular na refrigeração, os frigoríficos e congeladores domésticos permitindo informar o consumidor para os equipamentos mais eficientes. Mais recentemente, frigoríficos comerciais e profissionais também terão obrigatoriedade de incluir um rótulo energético na parte externa dos mesmos. Nesses rótulos estão incluídas várias informações técnicas do aparelho representadas de uma forma compreensível e lúdica aos olhos do consumidor mais leigo, entre as quais as classes de eficiência energética. As classes de eficiência energética caracterizam-se pela componente tecnológica dos frigoríficos. Perceber quais os componentes e materiais em particular que promovem uma melhor eficiência, quantificar a sua influência e avaliar os seus custos de integração torna-se assim essencial para toda a cadeia envolvida na produção destes equipamentos. Os fluídos frigorigénios e compressores aparentam ser os que mais exercem influência na eficiência de frigoríficos de baixa potência. Tubos capilares com trocador de calor são uma escolha mais eficiente comparado com o tubo capilar padrão que é utilizado nestes frigoríficos. Por forma a obter informação adicional e relevante do ponto de vista da análise energética realizaram-se simulações para determinação do consumo elétrico anual com recurso ao software Pack Calculation Pro. Entre os fluídos frigorigénios R-134a, R-22 e R-410a, os compressores scroll apresentaram consumos mais reduzidos (no máximo de 16%) do que os compressores alternativos. No caso do amoníaco (R-717) os compressores alternativos consumiram em média 14% menos do que os compressores parafuso. O recurso a velocidade variável em compressores permite reduzir o consumo na ordem dos 25%. Válvulas de expansão eletrónicas trazem reduções no consumo de 1,5% quando comparadas com válvulas de expansão termostáticas em compressores de velocidade variável. O propano (R-290) é um gás que mostra ter um melhor desempenho do que o R-134a e R404a em vários compressores, consumindo 16% menos do que o R-404a. Em função da temperatura exterior, o R-290 também apresentou um bom desempenho consumindo em climas quentes (Belém, Brasil) 24% menos do que o R-404a.

Designing ionic liquids for absorptive cooling

A computational methodology for designing ionic liquids (ILs) with an enhanced water absorption capacity to be used in absorption-refrigeration systems is presented here. It is based on increasing the hydrogen bond (HB)-acceptor ability of the anion and combining it with a cation that presents a weak cation-anion interaction. Employing this strategy, we identified and prepared three novel dianionic ILs with an enhanced water absorption capacity, larger than LiBr.

Evaluation of the conductor-like screening model for real solvents for the prediction of the water activity coefficient at infinite dilution in ionic liquids

Ionic liquids (ILs) have attracted great attention, from both industry and academia, as alternative fluids for very different types of applications. The large number of cations and anions allow a wide range of physical and chemical characteristics to be designed. However, the exhaustive measurement of all these systems is impractical, thus requiring the use of a predictive model for their study. In this work, the predictive capability of the conductor-like screening model for real solvents (COSMO-RS), a model based on unimolecular quantum chemistry calculations, was evaluated for the prediction water activity coefficient at infinite dilution, gamma(infinity)(w), in several classes of ILs. A critical evaluation of the experimental and predicted data using COSMO-RS was carried out. The global average relative deviation was found to be 27.2%, indicating that the model presents a satisfactory prediction ability to estimate gamma(infinity)(w) in a broad range of ILs. The results also showed that the basicity of the ILs anions plays an important role in their interaction with water, and it considerably determines the enthalpic behavior of the binary mixtures composed by Its and water. Concerning the cation effect, it is possible to state that generally gamma(infinity)(w) increases with the cation size, but it is shown that the cation-anion interaction strength is also important and is strongly correlated to the anion ability to interact with water. The results here reported are relevant in the understanding of ILs-water interactions and the impact of the various structural features of its on the gamma(infinity)(w) as these allow the development of guidelines for the choice of the most suitable lLs with enhanced interaction with water.

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Interface entre arquitetura bioclimática e decisões projetuais

This research has as its object study focus bioclimatic in architecture and its conection with projects decisions, on what regards to environmental comfort for single-family dwelling. From the analysis of five architectural projects inserted in Natal/RN, warm-moist weather, this research gather informations regarding architectural features guided by shape and space arrengement, which embody important elements for the project design development. Computer simulations assisted as foundation to verify the efficiency grade for these projects strategies from shading analysis. Related strategies for the demands of natural ventilation circulation and thermal mass for refrigeration were analysed as well. Results show that there is an hierarchizing of priorities for the decisions made when it comes to shape and space disposition variables, as well as the way these variables will consider the bioclimatic demands. The analysis, even, show that there is no single way to respond to specific bioclimatic demands, as it points out the value of examination of the projectual solutions throughtout the conception process, in order to achieve an efficient project performance for the envimonment comfort

Effect of Chemical Pretreatments on the Physical Properties of Kiwi

In this work the effect of pre-treatments on the physical properties of fresh kiwi was studied. For that, a set of tests using chemical pretreatments was used, in which the samples were subjected to aqueous solutions of ascorbic acid and potassium metabisulfite at concentrations of 0.25% and 1% (w/v) for periods of 30 and 60 minutes, in order to understand the implications of the treatments in the color and texture of the kiwi as compared to its original properties. The results showed that the kiwi treated with ascorbic acid changed its color very intensively when compared to the fresh product, and this trend was intensified after storage. Contrarily, when potassium metabisulfite was used, the changes in color were quite negligible right after the treatment and even lower after the storage period of 6 days under refrigeration. After the treatments with both solutions, the kiwi texture was drastically changed, diminishing hardness considerably and increasing elasticity for all treatments. The same could be observed after six days of refrigeration.

Some comments about the use of GHP in Alentejo (Portugal)

In this work we advocate the use of geothermal pumps to cool the isolated houses that can be observed in the plain of Alentejo. Passive cooling of the houses, made for centuries, becomes insufficient when it aims to promote tourism in the region. The climatic characteristics of the region and the relatively high values of the thermal conductivity of the ground favour this type of use. The available land around the houses provide places where you can drill or make trenches to put the pipes under the surface . Some values of pipe lengths were obtained using values appropriate for the region. The need to try to preserve the shape of the typical houses of the region discourages the use of solar panels placed on the roofs. The length and time of use of the equipment is another factor to take into account in the analysis of the costs.

Qualidade da carne de ovinos puros e cruzados criados no Semiárido Nordestino brasileiro.

Resumo: A procura por carne de qualidade tem proporcionado ao setor de ovinocultura a adoção por técnicas de produção que possam contribuir para disponibilizar ao mercado produtos que atendam as necessidades dos consumidores, que se tornam cada vez mais exigentes quanto à aquisição de produtos que possam trazer benefícios a saúde. Assim, objetivou-se determinar a qualidade da carne de ovinos puros e cruzados criados no semiárido Nordestino. Utilizaram-se 30 cordeiros machos e fêmeas, oriundos dos cruzamentos Morada Nova x Morada Nova, Rabo Largo x Morada Nova e Santa Inês x Morada Nova, alojados em baias e alimentados com dieta a base de capim Canarana, milho farelo de soja e calcário. Os animais foram abatidos com peso médio de 24 kg de peso vivo e as carcaças mantidas em câmara frigorífica a 4?C, por 24 horas. Após esse período, foi seccionado o músculo Longissimus dorsi que foi embalado, identificado e armazenado a 20?C. Foram determinados os atributos físicos de capacidade de retenção de água, perda de peso por cocção e força de cisalhamento; os atributos químicos como umidade, proteína, cinza, lipídios e colesterol; avaliações subjetivas da carcaça como cor, marmoreio, textura da carne, distribuição da gordura, espessura da gordura e área de olho de lombo; os sensoriais de dureza, suculência, sabor, aroma e aceitação global e o perfil de ácidos graxos. O delineamento utilizado foi em esquema fatorial 3x2 (três grupos genéticos e dois sexos) e as médias comparadas pelo teste de Duncan a 5%. Não houve diferença (p>0,05) entre os genótipos para a composição química da carne, exceto para a variável lipídio (p<0,05). Para as características subjetivas da carcaça o genótipo influenciou (p<0,05) nas variáveis cor, marmoreio e textura da carne. O genótipo promoveu efeito (p<0,05) para as características físicas de capacidade de retenção de água e perda de peso por cocção. Os atributos sensoriais não sofreram efeitos (p>0,05) dos genótipos avaliados. Os genótipos influenciaram (p<0,05) as concentrações dos ácidos graxos saturados, monoinsaturados e poli-insaturados assim como, nas relações ?3:?6 e AGM:AGS. O fator sexo influenciou (p<0,05) nas variáveis umidade, força de cisalhamento, dureza, ácidos graxos desejáveis e relação ?3:?6. O cruzamento entre raças nativas mostrou-se com potencial para a produção de carne de qualidade, a raça Morada Nova melhorou os atributos físico-químicos da carne e em seu perfil lipídico e, o fator sexo melhorou o atributo maciez dando destaque a carne das fêmeas. Abstract: The demand for quality meat products has given the sheep industry sector productions techniques that can contribute providing the market with products that supply the needs of consumers require, who are becoming more demanding as the acquisition of differentiated and bring health benefits. The objective was to evaluate the quality of the pure sheep meat and cross bred in the semiarid Northeast of Brazil. It was used 30 male lambs and female, that came from crosses Morada Nova x Morada Nova, Rabo Largo x Morada Nova and Santa Ines x Morada Nova, housed in pens and fed a diet of grass Canarana, corn soybean meal and limestone. The animals were slaughtered at average weight of 24 kg, live weight, and carcasses kept in refrigeration chamber at 4 ° C for 24 hours. After this period the Longissimus dorsi muscle was selected, packaged, labeled and stored at 20˚C. The physical attributes were determined such as water holding capacity, cooking weight loss and shear force; the chemical attributes such as moisture, protein, ash, lipids and cholesterol; Subjective evaluations such as color, marbling, meat texture, fat distribution, fat thickness and loin eye area; the hardness sensory, juiciness, flavor, aroma and global acceptance and fatty acid profile. The design was a 3x2 factorial arrangement (three genetic groups and two genders) and the measures compared by Duncan test at 5%. There was no difference (p> 0.05) between genotypes for the chemical composition of meat, except for the lipid variable (p <0.05). To the subjective characteristics of the carcass, the genotype influenced (p <0.05) in the variables color, marbling and meat texture. The genotype promoted significant effect (p <0.05) for the physical characteristics, water retention capacity and weight loss on cooking. The sensory attributes did not suffer significant effects (p> 0.05) of the evaluated genotypes. The genotypes influenced (p <0.05) in the concentrations of saturated fatty acids, monounsaturated and polyunsaturated as well as in the relations ω3: ω6 and AGM:AGS. The gender factor influenced (P <0.05) in the variables moisture, shear strength, hardness, desirable fatty acids and relation ω3: ω6. The cross between native breeds showed up with potential for quality meat production, the Morada Nova improved the physical and chemical attributes of the flesh and in their lipid profiles and sex factor improved softness attribute highlighting the meat of females.