Caracterização e origem da composição química da incrustação e simulação de cenários de perda de energia em setor da rede de abastecimento de água da cidade de Rio Claro - SP

The purpose of this work was the inlay’s characterization from the water supply networks of Rio Claro-SP city; as well analyze the influence of network’s aging in the actual system. To do this, some samples of inlays were collected and made chemistry analysis and X-Ray Diffraction Spectrometry. The history of the source water quality was also analyzed, to make possible to known the origins of the inlays. To evaluate the performance of the network, some different scenarios have been simulated, varying the resistance coefficient of the water supply networks of Rio Claro-SP. The characterization results showed that there are basically oxide and hydroxide of iron (magnetite and goethite) and quartz in the inlays, which are materials of high hardness. The hydraulic simulations indicated that the simulated scenarios had a variation of ~2000% in terms of loss of energy

Análise teórica e experimental de uma ventaneira de alto forno, visando seu comportamento térmico e fluidodinâmico

In this work, it was studied the thermal and fluid dynamic behavior from theorical and experimental point of view of a blast furnace tuyere. The tuyere is responsible for the hot air insuflation into the blast furnace. The parameter used in the comparison was the difference between the cooling water inlet and outlet temperatures. There were used forced convection correlations inside circular sections with adequations for non circular sections. Based on operations dates of flux and thermal loads it was possible to model numerically the tuyere, and, since it was obtained the wall temperatures, estimate the conduction and convection resistances and the heat flux through the walls in contact with the water. The total heat fluxes from wall to water were applied to the energy conservation equation where could be estimated the theorical temperature variation. Compared to the real value, the theorical value presented a difference of 0,2 °C. Considering that the boundary conditions around the tuyere are transitories and that your channels have some rugosity irregularities we can consider the estimation method for cooling system coherent with the real operational parameters

Titanium-35niobium alloy as a potential material for biomedical implants: in vitro study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A geomorphological seabed classification for the Weddell Sea, Antarctica, with links to ArcGIS project files

Sea floor morphology plays an important role in many scientific disciplines such as ecology, hydrology and sedimentology since geomorphic features can act as physical controls for e.g. species distribution, oceanographically flow-path estimations or sedimentation processes. In this study, we provide a terrain analysis of the Weddell Sea based on the 500 m × 500 m resolution bathymetry data provided by the mapping project IBCSO. Seventeen seabed classes are recognized at the sea floor based on a fine and broad scale Benthic Positioning Index calculation highlighting the diversity of the glacially carved shelf. Beside the morphology, slope, aspect, terrain rugosity and hillshade were calculated. Applying zonal statistics to the geomorphic features identified unambiguously the shelf edge of the Weddell Sea with a width of 45-70 km and a mean depth of about 1200 m ranging from 270 m to 4300 m. A complex morphology of troughs, flat ridges, pinnacles, steep slopes, seamounts, outcrops, and narrow ridges, structures with approx. 5-7 km width, build an approx. 40-70 km long swath along the shelf edge. The study shows where scarps and depressions control the connection between shelf and abyssal and where high and low declination within the scarps e.g. occur. For evaluation purpose, 428 grain size samples were added to the seabed class map. The mean values of mud, sand and gravel of those samples falling into a single seabed class was calculated, respectively, and assigned to a sediment texture class according to a common sediment classification scheme.

Variations in seafloor depth estimates under different swath-width characteristics of submarine structures in the California Borderlands

Senior thesis written for Oceanography 445

Cellular interaction with novel biomaterials

The objective of this thesis is to report the behaviour of mammalian cells with biocompatible synthetic polymers with potential for applications to the human body. Composite hydrogel materials were tested as possible keratoprosthetic devices. It was found that surface topography is an important consideration, pores, channels and fibres exposed on the surface of the hydrogels tested can have significant effects on the extent of cell adheson and proliferation. It is recommended that the core component is fabricated out of one of the following to provide a non cell adhesive base; A8, A11, A13, A22, A23. The haptic periphery fabricated out of one of the following would provide a cell adhesive composite; A16, A30, A33, A37, A38, A42, A43, A44. The presence of vitronectin in the ocular tissue appears to lead to higher cell adhesion to the posterior surface of a contact lens when compared to the anterior surface. Group IV contact lenses adhere more cells than Group II contact lenses - this may indicate that more protein (including vitronectin) is able to adhere to the contact lens due to the Group IV contact lenses high water content and ionic hydrogel matrix. Artificial lung surfactant analogues were found to be non cytotoxic but also decreased cell proliferation when tested at higher concentrations. Poly(lysine ethyl ester adipamide) [PLETESA] had the most favourable response on cell proliferation and commercial styrene/maleic anhydride (pMA/STY sp2) the most pronounced inhibitory response. The mode of action that decreases cell proliferation appears to be through membrane destabilization. Tissue culture well plates coated with PLETESA allowed cells to adhere in a concentration dependent manner, multilaminar liposomes possibly of PLETESA were observed in solution in PLETESA coated wells. Polyhydroxybutryate (PHB) and polyhydroxyvalerate (PHV) blends that contained hydroxyapatite were found to be the most cell adhesive material of those materials tested. The blends that were most susceptible to degradation adhered the most cells in initial stages of degradation. The initial slight increase in cell adhesion may be due to the increased rugosity of the material. As the degradation continued the number of cells adhering to the samples decreased, this may indicate that the polarity was inhibitory to cell adhesion during the later stages of degradation.

Investigation and development of techniques for the characterisation of the synthetic/biological interface

The purpose of this study is to increase our knowledge of the nature of the surface properties of polymeric materials and improve our understanding of how these factors influence the deposition of proteins to form a reactive biological/synthetic interface. A number of surface analytical techniques were identified as being of potential benefit to this investigation and included in a multidisciplinary research program. Cell adhesion in culture was the primary biological sensor of surface properties, and it showed that the cell response to different materials can be modified by adhesion promoting protein layers: cell adhesion is a protein-mediated event. A range of surface rugosity can be produced on polystyrene, and the results presented here show that surface rugosity does not play a major role in determining a material's cell adhesiveness. Contact angle measurements showed that surface energy (specifically the polar fraction) is important in promoting cell spreading on surfaces. The immunogold labelling technique indicated that there were small, but noticeable differences, between the distribution of proteins on a range of surfaces. This study has shown that surface analysis techniques have different sensitivities in terms of detection limits and depth probed, and these are important in determining the usefulness of the information obtained. The techniques provide information on differing aspects of the biological/synthetic interface, and the consequence of this is that a range of techniques is needed in any full study of such a complex field as the biomaterials area.

Hide, survive and hitch a ride, the dispersal of Antarctic krill into the nursery habitats

Antarctic krill (Euphausia superba), a key species of Southern Ocean food webs plays a central role in ecosystem processes, community dynamics of apex predators and as a commercial fishery target. A decline in krill abundance during the late 20th century in the SW Atlantic sector has been linked to a concomitant decrease in sea ice, based on the hypothesis that sea ice acts as a feeding ground for overwintering larvae. However, evidence supporting this hypothesis has been scarce due to logistical challenges of collecting data in austral winter. Here we report on a winter study that involved diver observations of larval krill in their under-ice environment, ship-based studies of krill, sea ice physical characteristics, and biophysical model analyses of krill-ocean-ice interactions. We present evidence that complex under-ice topography is vital for larval krill in terms of dispersal and advection into high productive nursery habitats, rather than the provision by the ice environment of food. Further, ongoing changes in sea ice will lead to increases in sea-ice regimes favourable for overwintering larval krill but shifting southwards. This will result in ice-free conditions in the SW Atlantic, which will be conducive for enhancing food supplies due to sufficient light and iron availability, thus enhancing larvae development and growth. However, the associated impact on dispersal and advection may lead to a net shift in krill from the SW Atlantic to regions further east by the eastward flowing ACC and the northern branch of the Weddell Gyre, with profound consequences for the Southern Ocean pelagic ecosystem.

Assessing the influence of abiotic factors and leaf-level properties on the stability of growing-season canopy greenness in a deciduous forest

Maps depicting spatial pattern in the stability of summer greenness could advance understanding of how forest ecosystems will respond to global changes such as a longer growing season. Declining summer greenness, or “greendown”, is spectrally related to declining near-infrared reflectance and is observed in most remote sensing time series to begin shortly after peak greenness at the end of spring and extend until the beginning of leaf coloration in autumn,. Understanding spatial patterns in the strength of greendown has recently become possible with the advancement of Landsat phenology products, which show that greendown patterns vary at scales appropriate for linking these patterns to proposed environmental forcing factors. This study tested two non-mutually exclusive hypotheses for how leaf measurements and environmental factors correlate with greendown and decreasing NIR reflectance across sites. At the landscape scale, we used linear regression to test the effects of maximum greenness, elevation, slope, aspect, solar irradiance and canopy rugosity on greendown. Secondly, we used leaf chemical traits and reflectance observations to test the effect of nitrogen availability and intrinsic water use efficiency on leaf-level greendown, and landscape-level greendown measured from Landsat. The study was conducted using Quercus alba canopies across 21 sites of an eastern deciduous forest in North America between June and August 2014. Our linear model explained greendown variance with an R2=0.47 with maximum greenness as the greatest model effect. Subsequent models excluding one model effect revealed elevation and aspect were the two topographic factors that explained the greatest amount of greendown variance. Regression results also demonstrated important interactions between all three variables, with the greatest interaction showing that aspect had greater influence on greendown at sites with steeper slopes. Leaf-level reflectance was correlated with foliar δ13C (proxy for intrinsic water use efficiency), but foliar δ13C did not translate into correlations with landscape-level variation in greendown from Landsat. Therefore, we conclude that Landsat greendown is primarily indicative of landscape position, with a small effect of canopy structure, and no measureable effect of leaf reflectance. With this understanding of Landsat greendown we can better explain the effects of landscape factors on vegetation reflectance and perhaps on phenology, which would be very useful for studying phenology in the context of global climate change

Distribuição e abundância da malacofauna epibentônica no Parracho de Maracajaú, RN, Brasil

The mollusks present a great taxon variety and life habits in coral reefs being good environmental indicators. It is important to know the distribution pattern of the mollusks and the processes that influence it, so that disturbances in sea ecosystems could be monitored. The present study aims to accomplish the inventory and distribution of epibenthic mollusks in the Parracho of Maracajaú. 23 sites in different habitats of the Parracho were settled: 11 in the reef habitat, 3 in the sandy bottom and 9 in the seagrass bed. Qualitative and quantitative samplings have been done through snorkeling and scuba diving. Three band transects (10m²) were sampled in each site and the data were obtained to each m² of the transect, where the species were counted and the environmental variables (rugosity and recovery of the substratum) were valued. The data were submitted to multivariate analyses in order to find possible distribution patterns that could be associated to the substratum variables. The diversity indexes were calculated for each reef sites and compared with each other. A number of 46 species were registered. The reef habit at should to be the richnest area while the sandy bottom was poorest one. In the reef habitat, the mollusks were associated to rugosity and recovering of frondose algae and zoanthids, while for the seagrass bed, the animals exhibited a richness variation associated to the muddy and sandy sediment. There were found 3 species economically explored, what requires an appropriate management for the maintenance and conservation of the area resources in a sustainable way

Distribuição e abundância da malacofauna epibentônica no Parracho de Maracajaú, RN, Brasil

The mollusks present a great taxon variety and life habits in coral reefs being good environmental indicators. It is important to know the distribution pattern of the mollusks and the processes that influence it, so that disturbances in sea ecosystems could be monitored. The present study aims to accomplish the inventory and distribution of epibenthic mollusks in the Parracho of Maracajaú. 23 sites in different habitats of the Parracho were settled: 11 in the reef habitat, 3 in the sandy bottom and 9 in the seagrass bed. Qualitative and quantitative samplings have been done through snorkeling and scuba diving. Three band transects (10m²) were sampled in each site and the data were obtained to each m² of the transect, where the species were counted and the environmental variables (rugosity and recovery of the substratum) were valued. The data were submitted to multivariate analyses in order to find possible distribution patterns that could be associated to the substratum variables. The diversity indexes were calculated for each reef sites and compared with each other. A number of 46 species were registered. The reef habit at should to be the richnest area while the sandy bottom was poorest one. In the reef habitat, the mollusks were associated to rugosity and recovering of frondose algae and zoanthids, while for the seagrass bed, the animals exhibited a richness variation associated to the muddy and sandy sediment. There were found 3 species economically explored, what requires an appropriate management for the maintenance and conservation of the area resources in a sustainable way