Modelo 2,5D de predição de propagação para ambientes interiores utilizando o método do traçado de raios

A 2.5D ray-tracing propagation model is proposed to predict radio loss in indoor environment. Specifically, we opted for the Shooting and Bouncing Rays (SBR) method, together with the Geometrieal Theory of Diffrartion (GTD). Besides the line-of-sight propagation (LOS), we consider that the radio waves may experience reflection, refraction, and diffraction (NLOS). In the Shooting and Bouncing Rays (SBR) method, the transmitter antenna launches a bundle of rays that may or may not reach the receiver. Considering the transmitting antenna as a point, the rays will start to launch from this position and can reach the receiver either directly or after reflections, refractions, diffractions, or even after any combination of the previous effects. To model the environment, a database is built to record geometrical characteristics and information on the constituent materials of the scenario. The database works independently of the simulation program, allowing robustness and flexibility to model other seenarios. Each propagation mechanism is treated separately. In line-of-sight propagation, the main contribution to the received signal comes from the direct ray, while reflected, refracted, and diffracted signal dominate when the line-of-sight is blocked. For this case, the transmitted signal reaches the receiver through more than one path, resulting in a multipath fading. The transmitting channel of a mobile system is simulated by moving either the transmitter or the receiver around the environment. The validity of the method is verified through simulations and measurements. The computed path losses are compared with the measured values at 1.8 GHz ftequency. The results were obtained for the main corridor and room classes adjacent to it. A reasonable agreement is observed. The numerical predictions are also compared with published data at 900 MHz and 2.44 GHz frequencies showing good convergence

Otimização de modelos de predição da perda de propagação aplicáveis em 3,5GHZ utilizando algoritmos genéticos

The telecommunications industry has experienced recent changes, due to increasing quest for access to digital services for data, video and multimedia, especially using the mobile phone networks. Recently in Brazil, mobile operators are upgrading their networks to third generations systems (3G) providing to users broadband services such as video conferencing, Internet, digital TV and more. These new networks that provides mobility and high data rates has allowed the development of new market concepts. Currently the market is focused on the expansion of WiMAX technology, which is gaining increasingly the market for mobile voice and data. In Brazil, the commercial interest for this technology appears to the first award of licenses in the 3.5 GHz band. In February 2003 ANATEL held the 003/2002/SPV-ANATEL bidding, where it offered blocks of frequencies in the range of 3.5 GHz. The enterprises who purchased blocks of frequency were: Embratel, Brazil Telecom (Vant), Grupo Sinos, Neovia and WKVE, each one with operations spread in some regions of Brazil. For this and other wireless communications systems are implemented effectively, many efforts have been invested in attempts to developing simulation methods for coverage prediction that is close to reality as much as possible so that they may become believers and indispensable tools to design wireless communications systems. In this work wasm developed a genetic algorithm (GA's) that is able to optimize the models for predicting propagation loss at applicable frequency range of 3.5 GHz, thus enabling an estimate of the signal closer to reality to avoid significant errors in planning and implementation a system of wireless communication

Avaliação dos modelos de predição de propagação para telefonia móvel celular na cidade do Natal

The development of wireless telecommunication in the last years has been great. It has been taking academics to conceive new ideas and techniques. Their aims are to increase the capacity and the quality of the system s services. Cells that are smaller every time, frequencies that are every time higher and environments that get more and more complex, all those facts deserve more accurate models the propagation prediction techniques are inserted in this context and results with a merger of error that is compatible with the next generations of communication systems. The objective of this Work is to present results of a propagation measurement campaign, aiming at pointing the characteristics of the mobile systems covering in the city of Natal (state of Rio Grande do Norte, Brazil). A mobile laboratory was set up, using the infra-structure available and frequently used by ANATEL. The measures were taken in three different areas: one characterized by high buildings, high relief, presence of trees and towers of different highs. These areas covered the city s central zone, a suburban / rural zone and a section of coast surrounded by sand dunes. It is important to highlight that the analysis was made taking into consideration the actual reality of cellular systems with covering ranges by reduced cells, with the intent of causing greater re-use of frequencies and greater capacity of telephone traffic. The predominance of telephone traffic by cell in the city of Natal occurs within a range inferior to 3 (three) km from the Radio-Base Station. The frequency band used was 800 MHz, corresponding to the control channels of the respective sites, which adopt the FSK modulation technique. This Dissertation starts by presenting a general vision of the models used for predicting propagation. Then, there is a description of the methodology used in the measuring, which were done using the same channels of control of the cellular system. The results obtained were compared with many existing prediction models, and some adaptations were developed by using regression techniques trying to obtain the most optimized solutions. Furthermore, according to regulations from the old Brazilian Holding Telebrás, a minimum covering of 90% of a determined previously area, in 90% of the time, must be obeyed when implanting cellular systems. For such value to be reached, considerations and studies involving the specific environment that is being covered are important. The objective of this work is contribute to this aspect

Propagação vegetativa da alfavaca-cravo utilizando diferentes tipos de estacas e substratos

A propagação vegetativa é considerada importante ferramenta para o melhoramento de espécies lenhosas e herbáceas e vem sendo amplamente utilizada, visando melhorar e manter variedades de importância econômica e medicinal. Neste contexto utilizou-se estacas de alfavaca-cravo de 15 cm para apicais e 25 cm para as medianas, sendo estas com e sem folhas. As estacas foram plantadas em bandejas de isopor de 72 células, utilizando-se 10 substratos. Após 35 dias, as estacas foram retiradas com cuidado, sendo as partes aéreas e radiculares separadas e acondicionadas em saco de papel e mantidas em estufa a 70ºC por 48 h para posterior avaliação da matéria seca. Analisou-se a percentagem de enraizamento, número de folhas na estaca, peso de matéria seca de folha e de raiz. Não houve interação significativa entre os diferentes tipos de substrato e estaca para percentagem de enraizamento, sendo que os substratos de modo geral diferiram pouco entre si. Entre os tipos de estaca destacaram-se para esta variável a mediana sem folha e a apical com folha. Para as demais variáveis houve interação significativa entre o tipo de estaca e o substrato. A melhor estaca foi a mediana sem folhas plantadas em substrato arisco + esterco + húmus e vermiculita nas seguintes proporções: 20%:40%:40%; 40%:20%:40% e 40%:40%.

Formas de propagação de espécies de uso medicinal popular em cinco municípios do estado do Amazonas

This work was carried out in five counties of Amazon State, Brazil, along the Solimoes/Amazonas and Negro Rivers. The objective was to identify the several forms of natural and induced propagation with medicinal plants, natives and exotics. The peoples were interviewed, with visit and recollection of botanical materials to herborization and reproduction. The greatest parts of plants propagate by seeds (65,8 per cent) and cutting (23,5 per cent). It was showed several species that reproduce by other strategies, like bulbs, rhizomes or brotations. The Amazonian species, in general, propagate by seeds, with some exceptions.

Propagação vegetativa de aroeira-pimenteira (Schinus terebinthifolius Raddi)

Este trabalho foi realizado com o objetivo de avaliar os melhores métodos e épocas de realização da enxertia, sobre o pegamento de enxertos de aroeira-pimenteira (Schinus terebinthifolius Raddi). Foram conduzidos dois experimentos, instalados na Faculdade de Ciências Agronômicas, da Universidade Estadual Paulista - Câmpus de Botucatu-SP, nos períodos de 16 de dezembro de 2005 a 30 de janeiro 2006 e de 03 de junho a 17 de julho de 2006. O delineamento utilizado foi de blocos casualizados, com cinco tratamentos, três repetições cada e dez plantas por parcela. Os tratamentos foram: garfagem no topo em fenda cheia, inglês simples, inglês complicado; borbulhia em T normal e T invertido. As diferentes épocas do ano alteraram o índice de pegamento, o que restringe o período de coleta de garfos. A maior porcentagem de pegamento ocorreu no mês de dezembro, com a enxertia em fenda cheia (40%). No mês de junho, não houve pegamento significativo, mostrando então que o mês de dezembro é o mês ideal, entre os estudados, para a realização da enxertia em aroeira. As garfagens em geral foram superiores à borbulhia. Houve baixo índice de pegamento, quando não foi nulo, e, além disso, suas borbulhas não apresentaram brotos dentro de 45 dias. A maior porcentagem de plantas com brotos, aos 45 dias, foi pelo método inglês simples, com 92%.

Propagação vegetativa de plantas de pariparoba [Pothomorphe umbellata (L.) Miq.] em diferentes substratos e número de nós das estacas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propagação de danos em sistemas cooperativos: propriedades termodinâmicas

High-precision calculations of the correlation functions and order parameters were performed in order to investigate the critical properties of several two-dimensional ferro- magnetic systems: (i) the q-state Potts model; (ii) the Ashkin-Teller isotropic model; (iii) the spin-1 Ising model. We deduced exact relations connecting specific damages (the difference between two microscopic configurations of a model) and the above mentioned thermodynamic quanti- ties which permit its numerical calculation, by computer simulation and using any ergodic dynamics. The results obtained (critical temperature and exponents) reproduced all the known values, with an agreement up to several significant figures; of particular relevance were the estimates along the Baxter critical line (Ashkin-Teller model) where the exponents have a continuous variation. We also showed that this approach is less sensitive to the finite-size effects than the standard Monte-Carlo method. This analysis shows that the present approach produces equal or more accurate results, as compared to the usual Monte Carlo simulation, and can be useful to investigate these models in circumstances for which their behavior is not yet fully understood

Propagação de danos no modelo de ising em redes de bravais e em fractais

In this work we have studied, by Monte Carlo computer simulation, several properties that characterize the damage spreading in the Ising model, defined in Bravais lattices (the square and the triangular lattices) and in the Sierpinski Gasket. First, we investigated the antiferromagnetic model in the triangular lattice with uniform magnetic field, by Glauber dynamics; The chaotic-frozen critical frontier that we obtained coincides , within error bars, with the paramegnetic-ferromagnetic frontier of the static transition. Using heat-bath dynamics, we have studied the ferromagnetic model in the Sierpinski Gasket: We have shown that there are two times that characterize the relaxation of the damage: One of them satisfy the generalized scaling theory proposed by Henley (critical exponent z~A/T for low temperatures). On the other hand, the other time does not obey any of the known scaling theories. Finally, we have used methods of time series analysis to study in Glauber dynamics, the damage in the ferromagnetic Ising model on a square lattice. We have obtained a Hurst exponent with value 0.5 in high temperatures and that grows to 1, close to the temperature TD, that separates the chaotic and the frozen phases

Propagação de danos: importância da atualização dinâmica, efeitos da diluição e propriedades termodinâmicas

Neste trabalho investigamos aspectos da propagação de danos em sistemas cooperativos, descritos por modelos de variáveis discretas (spins), mutuamente interagentes, distribuídas nos sítios de uma rede regular. Os seguintes casos foram examinados: (i) A influência do tipo de atualização (paralela ou sequencial) das configurações microscópicas, durante o processo de simulação computacional de Monte Carlo, no modelo de Ising em uma rede triangular. Observamos que a atualização sequencial produz uma transição de fase dinâmica (Caótica- Congelada) a uma temperatura TD ≈TC (Temperatura de Curie), para acoplamentos ferromagnéticos (TC=3.6409J/Kb) e antiferromagnéticos (TC=0). A atualização paralela, que neste caso é incapaz de diferenciar os dois tipos de acoplamentos, leva a uma transição em TD ≠TC; (ii) Um estudo do modelo de Ising na rede quadrada, com diluição temperada de sítios, mostrou que a técnica de propagação de danos é um eficiente método para o cálculo da fronteira crítica e da dimensão fractal do aglomerado percolante, já que os resultados obtidos (apesar de um esforço computacional relativamente modesto), são comparáveis àqueles resultantes da aplicação de outros métodos analíticos e/ou computacionais de alto empenho; (iii) Finalmente, apresentamos resultados analíticos que mostram como certas combinações especiais de danos podem ser utilizadas para o cálculo de grandezas termodinâmicas (parâmetros de ordem, funções de correlação e susceptibilidades) do modelo Nα x Nβ, o qual contém como casos particulares alguns dos modelos mais estudados em Mecânica Estatística (Ising, Potts, Ashkin Teller e Cúbico)

Propagação de danos para o modelo Ising em uma rede quadrada totalmente frustrada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Crescimento e desempenho de bertalha (Basella alba L.) em função do tipo de propagação

Malabar spinach is a non-conventional vegetable propagated mainly by seeds. This research evaluated the propagation by stem cuttings as an alternative method of propagation and verified its effect on growth of the vegetable. Plantlets propagated by seeds and stem cuttings were grown in greenhouse and their growth were evaluated in five successive intervals of 21 days each, with the first evaluation carried out 60 days after the transplanting. The results showed that the propagation methods have influence on the Malabar spinach growth. Plants propagated by seeds display slow, but vigorous growth, with larger relative yield of leaves and tender leaves, while plants propagated by cuttings showed fast initial growth, with rapid fruit formation. Thus, the propagation by cuttings is more suitable for seed production, while propagation by seeds is more profitable for leaves production.

Influência de diferentes tipos de estacas e substratos na propagação assexuada de hortênsia [Hydrangea macrophylla (Thunb.) Ser.]

A hortênsia (Hydrangea macrophylla) é um arbusto semilenhoso de 1,0 a 2,5 m de altura, de folhagem e florescimento decorativos, muito utilizados como flor de vaso e planta para paisagismo. Conduziu-se este trabalho com o objetivo de estudar o enraizamento de estacas de três partes da planta: apical, mediana e basal; em três tipos de substratos: terra, areia e vermiculita, para a formação de mudas. As estacas foram retiradas das plantas matrizes e divididas em segmentos apical, mediano e basal, os quais foram colocados para enraizar em bandejas de isopor, nos substratos areia, terra e vermiculita, em estufa com nebulização. As estacas que apresentaram melhor qualidade de raízes foram as originadas da parte basal do ramo, sendo que o melhor enraizamento foi observado nas estacas colocadas em areia. As estacas obtidas de diferentes partes da planta não se diferenciaram quanto à porcentagem de enraizamento e quanto ao número de brotos formados. Já os substratos que proporcionaram o maior número de brotações foram a areia e a terra. Algumas estacas apresentaram formação de flores, ocorrendo com maior freqüência nas estacas apicais, sem efeito dos substratos. A areia foi o substrato que proporcionou os melhores resultados quanto à qualidade das raízes e porcentagem de enraizamento. O substrato terra foi superior apenas para o número de brotos por estaca, porém não diferenciou estatisticamente da areia. Mudas formadas de estaca da parte basal da planta se mostraram com qualidade superior.

Propagação de sapotizeiro (Manilkara zapota L.) por estaquia

Two sapoti tree accesses (Manilkara zapota), native plants of south of Mexico and of America Central, belonging to the Collection of Fruitful Native and Exotic of UNESP/FCAV, Jaboticabal Campus, was studied with relationship to the cutting propagation. The first test consisted of fast immersion of cutting base semi-herbaceous foliage of selected accesses FCAV-III and FCAV-VII. The ttreatments were alcoholic solution (50%) of indolbutiric acid (IBA) in concentrations of 0, 1,000, 3,000, 5,000 and 7,000 mgL(-1). and the cuttings preparing with and without latex exudate washing for a period of 14 hours in recipient with pure water. This trial was set in 5 x 2 x 2 factorial scheme (IBA concentrations x accesses x cutting preparation) The second test consisted the herbaceous foliage immersion of FCAV-III access in IBA concentrations above. Both experiments were distributed in randomized design with four replications and 10 cuttings each. All cuttings were collected in spring and prepared with about 12 cm of length, planted in medium texture vermiculite and carried under conditions intermittent mist spray flashing in chamber with 50% light. The two accesses tested not rooted and treatments were not able to induce the roots emission.

Predição de propagação de fissuras através de modelos constitutivos locais e técnica de construção progressiva da trajetória de descontinuidade

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)