The impact of biofuels for road traffic on air quality : a modelling approach

The selection of the energy source to power the transport sector is one of the main current concerns, not only relative with the energy paradigm but also due to the strong influence of road traffic in urban areas, which highly affects human exposure to air pollutants and human health and quality of life. Due to current important technical limitations of advanced energy sources for transportation purposes, biofuels are seen as an alternative way to power the world’s motor vehicles in a near-future, helping to reduce GHG emissions while at the same time stimulating rural development. Motivated by European strategies, Portugal, has been betting on biofuels to meet the Directive 2009/28/CE goals for road transports using biofuels, especially biodiesel, even though, there is unawareness regarding its impacts on air quality. In this sense, this work intends to clarify this issue by trying to answer the following question: can biodiesel use contribute to a better air quality over Portugal, particularly over urban areas? The first step of this work consisted on the characterization of the national biodiesel supply chain, which allows verifying that the biodiesel chain has problems of sustainability as it depends on raw materials importation, therefore not contributing to reduce the external energy dependence. Next, atmospheric pollutant emissions and air quality impacts associated to the biodiesel use on road transports were assessed, over Portugal and in particular over the Porto urban area, making use of the WRF-EURAD mesoscale numerical modelling system. For that, two emission scenarios were defined: a reference situation without biodiesel use and a scenario reflecting the use of a B20 fuel. Through the comparison of both scenarios, it was verified that the use of B20 fuels helps in controlling air pollution, promoting reductions on PM10, PM2.5, CO and total NMVOC concentrations. It was also verified that NO2 concentrations decrease over the mainland Portugal, but increase in the Porto urban area, as well as formaldehyde, acetaldehyde and acrolein emissions in the both case studies. However, the use of pure diesel is more injurious for human health due to its dominant VOC which have higher chronic hazard quotients and hazard indices when compared to B20.

Post-fire vegetation regeneration in Portugal : implications for management

This thesis aims at improving the knowledge on the post-fire vegetation regeneration. For that, forests and shrublands were studied, after forest fires and experimental fires. Maritime Pine (Pinus pinaster) recruitment after fire was studied. Fire severity was evidenced as a major effect on this process. High crown fire severity can combust the pines, destroying the seed bank and impeding post fire pine recruitment. However, crown combustion also influences the post-fire conditions on the soil surface, since high crown combustion (HCC) will decrease the postfire needle cast. After low crown combustion (LCC) (scorched rather than torched crowns), a considerable needle cover was observed, along with a higher density of pine seedlings. The overall trends of post-fire recruitment among LCC and HCC areas could be significantly attributed to cover by needles, as well by the estimation of fire severity using the diameters of the burned twigs (TSI). Fire increased the germination from the soil seed bank of a Pinus pinaster forest, and the effects were also related with fire severity. The densities of seedlings of the dominant taxa (genus Erica and Calluna vulgaris) were contrastingly affected in relation to the unburned situation, depending on fire severity, as estimated from the degree of fire-induced crown damage (LCC/HCC), as well as using a severity index based on the diameters of remaining twigs (TSI). Low severity patches had an increase in germination density relatively to the control, while high severity patches suffered a reduction. After an experimental fire in a heathland dominated by Pterospartum tridentatum, Erica australis and E. umbellata, no net differences in seedling emergence were observed, in relation to the pre-fire situation. However, rather than having no effect, the heterogeneity of temperatures caused by fire promoted caused divergent effects over the burned plot in terms of Erica australis germination – a progressive increased was observed in the plots were maximum temperature recorded ranged from 29 to 42.5ºC and decreased in plots with maximum temperature ranging from 51.5 to 74.5ºC. In this heathland, the seed density of two of the main species (E. australis and E. umbellata) was higher under their canopies, but the same was not true for P. tridentatum. The understory regeneration in pine and eucalypt stands, 5 to 6 years post fire, has been strongly associated with post-fire management practices. The effect of forest type was, comparatively, insignificant. Soil tilling, tree harvesting and shrub clearance, were linked to lower soil cover percentages. However, while all these management operations negatively affected the cover of resprouters, seeders were not affected by soil tilling. A strong influence of biogeographic region was identified, suggesting that more vulnerable regions may suffer higher effects of management, even under comparatively lower management pressure than more productive regions. This emphasizes the need to adequate post-fire management techniques to the target regions.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

Regional and urban air quality modelling under a climate change scenario

The better understanding of the interactions between climate change and air quality is an emerging priority for research and policy. Climate change will bring changes in the climate system, which will affect the concentration and dispersion of air pollutants. The main objective of the current study is to assess the impacts of climate change on air quality in 2050 over Portugal and Porto urban area. First, an evaluation and characterization of the air quality over mainland Portugal was performed for the period between 2002 and 2012. The results show that NO2, PM10 and O3 are the critical pollutants in Portugal. Also, the influence of meteorology on O3, NO2 and PM10 levels was investigate in the national main urban areas (Porto and Lisboa) and was verified that O3 has a statistically significant relationship with temperature in most of the components. The results also indicate that emission control strategies are primary regulators for NO2 and PM10 levels. After, understanding the national air quality problems and the influence that meteorology had in the historical air quality levels, the air quality modelling system WRF-CAMx was tested and the required inputs for the simulations were prepared to fulfil the main goal of this work. For the required air quality modelling inputs, an Emission Projections under RCP scenarios (EmiPro-RCP) model was developed to assist the estimation of future emission inventories for GHG and common air pollutants. Also, the current emissions were estimated for Portugal with a higher detailed disaggregation to improve the performance of the air quality simulations. The air quality modelling system WRF/CAMx was tested and evaluated over Portugal and Porto urban area and the results point out that is an adequate tool for the analysis of air quality under climate change. For this purpose, regional simulations of air quality during historical period and future (2045-2050) were conducted with CAMx version 6.0 to evaluate the impacts of simulated future climate and anthropogenic emission projections on air quality over the study area. The climate and the emission projections were produced under the RCP8.5 scenario. The results from the simulations point out, that if the anthropogenic emissions keep the same in 2050, the concentrations of NO2, PM10 and O3 will increase in Portugal. When, besides the climate change effects, is consider the projected anthropogenic emissions the annual mean concentrations of NO2 decrease significantly in Portugal and Porto urban area, and on the contrary the annual mean PM10 concentrations increases in Portugal and decrease in Porto urban area. The O3 results are mainly caused by the reduction of ozone precursors, getting the higher reductions in urban areas and increases in the surrounding areas. All the analysis performed for both simulations for Porto urban area support that, for PM10 and O3, there will be an increase in the occurrence of extreme values, surpassing the annual legislated parameters and having more daily exceedances. This study constitutes an innovative scientific tool to help in future air quality management in order to mitigate future climate change impacts on air quality.

Changing climate, changing decisions : understanding climate adaptation decision-making and the way science supports it

Tese de doutoramento, Ciências do Ambiente, Universidade de Lisboa, Faculdade de Ciências, Universidade Nova de Lisboa, 2015

Avaliação do cádmio dos solos disponível para as plantas

Dissertação apresentada à Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, para cumprimentos dos requisitos necessários à obtenção do grau de Doutor em Ciências do Ambiente

Cogeração solar descentralizada – concentração solar em edifícios : uma nova abordagem

O projecto Efistec, iniciado na 4ª edição do curso de Empreendedorismo da Escola de Gestão do Porto (EGP), promovido pela Universidade do Porto em 2008, deu início a um percurso ambicioso, agora mais perto de estar concretizado. Com este projecto pretende-se implementar em edifícios de habitação, serviços e indústria (edificação em geral) uma nova tecnologia modular de concentração solar que permite a cogeração, com energia eléctrica com elevada eficiência e o aquecimento de águas sanitárias usando a mesma área de captação. A solução proposta naquele projecto pretende trazer para os edifícios uma tecnologia altamente eficiente e com um duplo aproveitamento da radiação solar.

Evolução tecnológica dos sistemas de conversão de Energia Eólica para ligação à rede

Desde muito cedo, na história da humanidade, que a energia eólica é aproveitada pelo homem, primeiro sob a forma de energia mecânica e mais recentemente sob a forma de energia elétrica. O crescimento rápido do consumo de eletricidade, no final do século XIX, motivou a aplicação do princípio de funcionamento dos tradicionais moinhos de vento à conversão da energia eólica em energia elétrica. No entanto, foi após os choques petrolíferos da década de 1970 que as atividade de Investigação e Desenvolvimento (I&D) se intensificaram de forma significativa conduzindo à instalação das primeiras turbinas eólicas comerciais no início da década de 1980 na Europa e nos EUA. Desde então, as tecnologias de conversão da energia eólica têm registado um desenvolvimento considerável que se estende desde as técnicas de construção cada vez mais robustas até à utilização de sistemas de conversão com possibilidade de serem explorados em velocidade variável, com consequências refletidas ao nível do aumento progressivo da potência unitária instalada e da diminuição do custo do kWh gerado.

Política e Legislação da Gestão da Qualidade do Ar Instrumentos, Ferramentas e Quadro Legal : Enquadramento de Portugal no Contexto Europeu e Internacional

Perante o agravamento das problemáticas atmosféricas a maior parte dos países mundo tem adotado ações concertadas e conjuntas tendentes a responder a estas realidade. No quadro da União Europeia, bloco económico e político ao qual Portugal pertence como estado-membro, tem vindo a ser desenvolvido um forte programa de combate à poluição atmosférica. Seguindo as principais linhas de orientação dos seus predecessores mas, ao mesmo tempo, trilhando novos caminhos para atingir desafiantes metas, o Sexto Programa de Ação em matéria de Ambiente (6.º PAA) pretende atingir níveis de qualidade do ar que não impliquem efeitos negativos nem riscos significativos para a saúde humana e o ambiente. A União Europeia tem pautado a sua atuação numa ótica de concertação de políticas e legislação como forma de reduzir as emissões atmosféricas dentro do seu espaço territorial. A articulação entre as políticas comunitárias que visam reduzir a exposição à poluição atmosférica e a produção legislativa em matéria da qualidade do ar, nomeadamente, a fixação de valores limites de emissão para os diferentes poluentes nas zonas e aglomeração das nossas cidades, encontra na gestão ambiental do recurso ar os conceitos e estratégias de atuação práticas fundamentais para, atuando como uma placa giratória de Ação, efeitos e resultados, se possa uniformizar e harmonizar as necessidades reais com a resposta política e legal nestas questões. Expor e compreender as metodologias, ferramentas e instrumentos legais ao serviço destes dois eixos (politicas e legislação) será o objetivo deste texto.

Uso sustentável de pesticidas : análise comparativa entre a União Europeia e o Brasil

Tese de doutoramento, Ciências do Ambiente, Universidade de Lisboa, Faculdade de Ciências, 2016

Estudo do aerossol (poeira do Sara) na região de Cabo Verde

No âmbito do projeto CV-DUST foi desenvolvida uma campanha de medição do aerossol atmosférico na Cidade da Praia (14° 55’ N, 23°29’ W), de janeiro de 2011 a janeiro de 2012. A concentração do aerossol foi determinada com base no método gravimétrico, com a amostragem feita em termos de PM10 e em frações granulométricas, usando impactores. Complementarmente, foi usado um contador ótico de partículas que permite a monitorização em contínuo e a classificação do número de partículas em 31 frações de tamanho na gama entre 0,25 e 32 μm. A composição química do aerossol foi determinada com incidência nos seguintes componentes: iões inorgânicos solúveis em água (Cl-, NO3-, SO42-, Na+, NH4+, K+, Mg2+ e Ca2+), carbonato total, elementos maioritários da crosta (Si, Na, Al, Fe, Ca, Mg, K, Ti e Mn) e elementos vestigiais (Ba, Zn, Zr, Pb, Cu, Ce, Ni, Cr, V, Co, Sc, As, Sm e Sb), assim como a fração carbonácea (carbono elementar – EC e o carbono orgânico - OC). Durante a campanha, a concentração de PM10 apresentou uma grande variabilidade temporal, com valores médios (à escala diária) situados entre 10 μg/m3 e 507 μg/m3, sendo a concentração média anual estimada em cerca de 59 μg/m3. As concentrações mais elevadas (tipicamente acima dos 100 μg/m3) foram registadas durante os eventos de poeira proveniente do Norte de África, sendo os mais intensos observados nos meses de janeiro, fevereiro e dezembro de 2011. Os registos do contador ótico, feitos em intervalos de 5 min, revelaram que durante os eventos de poeira as concentrações médias horárias das partículas PM10 e PM2.5 podem ultrapassar os 700 μg/m3 e 200 μg/m3, respetivamente. Com base nos resultados do método ótico, as contribuições das frações granulométricas PM1, PM(1-2.5) e PM(2.5-10) para a massa de PM10 foram estimadas em cerca de 11 %, 28 % e 61 %, respetivamente. A composição química do aerossol varia consideravelmente ao longo do ano e revela a predominância das partículas minerais e do sal marinho. Com base em cálculos do balanço mássico das espécies químicas, as contribuições dos dois constituintes maioritários para a massa de PM10 foram estimadas em cerca de 47 % (partículas minerais) e 17 % (sal marinho). O aerossol secundário (NO3-, NH4+ e fração não marinha do SO42) e o aerossol carbonáceo (EC + OC) contribuem cada um com cerca de 4 % e 3 %, respetivamente. A fração mássica restante (cerca de 29 %), corresponde aos constituintes não analisados, podendo a água ser a mais importante neste grupo. A análise química das amostras segregadas por tamanho revela a seguinte composição para as partículas PM1, PM(1-2.5) e PM(2.5-10): 5,2, 11,8 e 20,7 % (constituintes do sal marinho); 8,6, 3,7 e 3,1 % (iões secundários); 8,9, 1,5 e 1,3 % (EC + OC).

Environmental impacts of freshwater use and suspended solids in life cycle assessment

Perturbation of natural ecosystems, namely by increasing freshwater use and its degradative use, as well as topsoil erosion by water of land-use production systems, have been emerging as topics of high environmental concern. Freshwater use has become a focus of attention in the last few years for all stakeholders involved in the production of goods, mainly agro-industrial and forest-based products, which are freshwater-intensive consumers, requiring large inputs of green and blue water. This thesis presents a global review on the available Water Footprint Assessment and Life Cycle Assessment (LCA)-based methods for measuring and assessing the environmental relevance of freshwater resources use, based on a life cycle perspective. Using some of the available midpoint LCA-based methods, the freshwater use-related impacts of a Portuguese wine (white ‘vinho verde’) were assessed. However, the relevance of environmental green water has been neglected because of the absence of a comprehensive impact assessment method associated with green water flows. To overcome this constraint, this thesis helps to improve and enhance the LCA-based methods by providing a midpoint and spatially explicit Life Cycle Impact Assessment (LCIA) method for assessing impacts on terrestrial green water flow and addressing reductions in surface blue water production caused by reductions in surface runoff due to land-use production systems. The applicability of the proposed method is illustrated by a case study on Eucalyptus globulus conducted in Portugal, as the growth of short rotation forestry is largely dependent on local precipitation. Topsoil erosion by water has been characterised as one of the most upsetting problems for rivers. Because of this, this thesis also focuses on the ecosystem impacts caused by suspended solids (SS) from topsoil erosion that reach freshwater systems. A framework to conduct a spatially distributed SS delivery to freshwater streams and a fate and effect LCIA method to derive site-specific characterisation factors (CFs) for endpoint damage on aquatic ecosystem diversity, namely on algae, macrophyte, and macroinvertebrates organisms, were developed. The applicability of this framework, combined with the derived site-specific CFs, is shown by conducting a case study on E. globulus stands located in Portugal as an example of a land use based system. A spatially explicit LCA assessment was shown to be necessary, since the impacts associated with both green water flows and SS vary greatly as a function of spatial location.

O pedestrianismo como instrumento de valorização ecoturística dos sítios da Rede Natura 2000, nas ilhas de São Miguel e Flores

Tese de Doutoramento, Ciências do Ambiente (Ecologia), 30 de Julho de 2013, Universidade dos Açores.

How can science contribute for the sustainable management of natural resource? : Praia da Vitória Bay and Guadiana Estuary, a comparative study

Tese de Doutoramento, Ciências do Ambiente (Ordenamento do Território), 5 de Abril de 2013, Universidade dos Açores.

Medidas de radiação solar e índice de área foliar em coberturas vegetais.

Um método de inversão de modelo físico de penetração de radiação solar em meio vegetal para estimar o índice de área foliar (IAF) é apresentado e testado neste trabalho para diferentes tipos de vegetação, como alternativa aos experimentos destrutivos, trabalhosos e de difícil implementação em coberturas florestais.