Material effects on stress-induced defect generation in trenched silicon-on-insulator structures

We have investigated the influence of the material properties of the silicon device layer on the generation of defects, and in particular slip dislocations, in trenched and refilled fusion-bonded silicon-on-insulator structures. A strong dependence of the ease of slip generation on the type of dopant species was observed, with the samples falling into three basic categories; heavily boron-doped silicon showed ready slip generation, arsenic and antimony-doped material was fairly resistant to slip, while silicon moderately or lightly doped with phosphorous or boron gave intermediate behavior. The observed behavior appears to be controlled by differences in the dislocation generation mechanism rather than by dislocation mobility. The introduction of an implanted buried layer at the bonding interface was found to result in an increase in slip generation in the silicon, again with a variation according to the dopant species. Here, the greatest slip occurred for both boron and antimony-implanted samples. The weakening of the implanted material may be related to the presence of a band of precipitates observed in the silicon near the bonding interface. (C) 2001 The Electrochemical Society.

A search for circumstellar material around B-type stars in the Galactic halo

19 B-type stars, selected from the Palomar-Green Survey, have been observed at infrared wavelengths to search for possible infrared excesses, as part of an ongoing programme to investigate the nature of early-type stars at high Galactic latitudes. The resulting infrared fluxes, along with Stromgren photometry, are compared with theoretical flux profiles to determine whether any of the targets show evidence of circumstellar material, which may be indicative of post-main- sequence evolution. Eighteen of the targets have flux distributions in good agreement with theoretical predictions. However, one star, PG 2120 + 062, shows a small near-infrared excess, which may be due either to a cool companion of spectral type F5-F7, or to circumstellar material, indicating that it may be an evolved object such as a post-asymptotic giant branch star, in the transition region between the asymptotic giant branch and planetary nebula phase, with the infrared excess due to recent mass loss during giant branch evolution.

A heuristic model for the simulation of the deformation of elastic and spongy material for virtual reality applications

This paper presents a practical algorithm for the simulation of interactive deformation in a 3D polygonal mesh model. The algorithm combines the conventional simulation of deformation using a spring-mass-damping model, solved by explicit numerical integration, with a set of heuristics to describe certain features of the transient behaviour, to increase the speed and stability of solution. In particular, this algorithm was designed to be used in the simulation of synthetic environments where it is necessary to model realistically, in real time, the effect on non-rigid surfaces being touched, pushed, pulled or squashed. Such objects can be solid or hollow, and have plastic, elastic or fabric-like properties. The algorithm is presented in an integrated form including collision detection and adaptive refinement so that it may be used in a self-contained way as part of a simulation loop to include human interface devices that capture data and render a realistic stereoscopic image in real time. The algorithm is designed to be used with polygonal mesh models representing complex topology, such as the human anatomy in a virtual-surgery training simulator. The paper evaluates the model behaviour qualitatively and then concludes with some examples of the use of the algorithm.

Viscoelastic Material Models of Polypropylene for Thermoforming Applications

Polypropylene (PP), a semi-crystalline material, is typically solid phase thermoformed at temperatures associated with crystalline melting, generally in the 150° to 160°Celsius range. In this very narrow thermoforming window the mechanical properties of the material rapidly decline with increasing temperature and these large changes in properties make Polypropylene one of the more difficult materials to process by thermoforming. Measurement of the deformation behaviour of a material under processing conditions is particularly important for accurate numerical modelling of thermoforming processes. This paper presents the findings of a study into the physical behaviour of industrial thermoforming grades of Polypropylene. Practical tests were performed using custom built materials testing machines and thermoforming equipment at Queen′s University Belfast. Numerical simulations of these processes were constructed to replicate thermoforming conditions using industry standard Finite Element Analysis software, namely ABAQUS and custom built user material model subroutines. Several variant constitutive models were used to represent the behaviour of the Polypropylene materials during processing. This included a range of phenomenological, rheological and blended constitutive models. The paper discusses approaches to modelling industrial plug-assisted thermoforming operations using Finite Element Analysis techniques and the range of material models constructed and investigated. It directly compares practical results to numerical predictions. The paper culminates discussing the learning points from using Finite Element Methods to simulate the plug-assisted thermoforming of Polypropylene, which presents complex contact, thermal, friction and material modelling challenges. The paper makes recommendations as to the relative importance of these inputs in general terms with regard to correlating to experimentally gathered data. The paper also presents recommendations as to the approaches to be taken to secure simulation predictions of improved accuracy.

Tracing Inspiration in Proverbial Material: From 'The Royal Dictionary' (1699 & 1729) of Abel Boyer to 'The English-Irish Dictionary' (1732) of Begley-McCurtin.

This metalexicographic study examines the relationship between the proverbial material in The English-Irish Dictionary (1732) of Begley and McCurtin, Abel Boyer’s The Royal Dictionary (First edition 1699, second edition 1729), and Nathaniel Bailey’s An Universal Etymological English Dictionary (1721). It will show, for the first time, that both the English macrostructure and microstructure of the proverbial entries in Begley and McCurtin (1732) were reproduced directly from Boyer’s dictionary and, in spite of claims to the contrary, the impact of Bailey’s (1721) dictionary was negligible. Furthermore, empirical data gleaned from a comparative linguistic analysis of the various editions of The Royal Dictionary prior to 1732, will prove that it was the second official edition (1729) that was used as the framework for The English-Irish Dictionary. A quantitative and qualitative analysis of the nature of the proverbial entries will also outline the various translation strategies that were used to compose the Irish material— particularly literal translation—and show that there are extremely high-levels of borrowings from Boyer (1729), both in terms of the English entries under the lemma, and the French entries in the comment.

The Blason Populaire: Slurs and Stereotypes in Irish Proverbial Material

This paper examines the concept of the blason populaire in a corpus of Irish-language proverbial material covering the period 1858-1952. It will demonstrate that the focus of these blasons populaires is primarily regional, as opposed to national or ethnic, and, furthermore, that such proverbs are usually jocular, descriptive, and benign, rarely exhibiting ethnic or racial slurs. The study identifies and analyses the most salient stereotypical characterizations, and the proverbial forms in which they appear.

Correction for a possible reversible adsorption over an "inert" material

All TAP micro-reactor configurations contain inert particles which are used so that the catalyst zone can be maintained under isothermal conditions. Even on

Growth Inhibitory Activity of Extracted Material and Isolated Compounds from the Fruits of Kigelia pinnata

A study of the components of the fruits of Kigelia pinnata was undertaken to identify compounds with potential growth inhibitory activity against human melanoma cells, since extracts from the fruits of this plant have been described in traditional medicine to have application in the treatment of skin cancer and other skin ailments. A bioactivity-guided fractionation process yielded a number of crude fractions, which demonstrated cytotoxicity in vitro against human melanoma cells. Compounds isolated and identified included the isocoumarins, demethylkigelin (1) and kigelin 2), fatty acids, oleic (3) and heneicosanoic acids (4), the furonaphthoquinone, 2-(1-hydroxyethyl)-naphtho[2,3-b]furan-4,9-dione (5), and ferulic acid (6). A number of structurally related synthetic compounds were also tested using the MTT assay. The most potent series of these compounds, the furonaphthoquinones, also demonstrated a cytotoxic effect in two human breast cancer cell lines tested.