949 resultados para Radiação ultravioleta


Relevância:

100.00% 100.00%

Publicador:

Resumo:

A presente patente diz respeito a um dispositivo usado para reduzir a contaminação microbian dos fluidos de corte através de raios ultravioletas, o qual c nsiste em um tampo metálico que se adapta ao reservatório (3) de fluido de corte fechando completamente sua face superior, cujo tampo (1) contém lâmpadas (2) ultravioletas germicidas (UV-C), dispostas lado a lado, apresentando, ainda, pequenas janel s (4) para observação dispostas lateralmente e interruptor (5) ara as lâmpadas (2), sendo que os reatores das lâmpadas (2) s o instalados sobre uma chapa metálica (6).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The present study was aimed to evaluate different (semi-solid) media for the production of Metarhizium anisopliae and Beauveria bassiana propagules, and to evaluate the tolerance of these propagules to ultraviolet radiation and temperature. The experiments were performed at the Biological Control Laboratory of the Instituto Biológico at Campinas, São Paulo, Brazil. For both fungi, 6 repetitions were performed for each of the 17 treatments: corn starch, full rice, parboiled rice, type-1 rice, type-2 rice, oat flakes, canjiquinha [grits], wheat flour, raw cassava flour, yellow corn flour, special wheat flour, corn flour, corn in grains, cassava starch, soy in grains, crushed wheat, and turf. The viability analysis was done in plastic plates containing BDA. For the bioassays involving exposure to ultraviolet light and temperature, BDA was also used for viability analysis, and each treatment was exposed to the UV radiation for 0, 25 and 50 seconds, the temperature exposure being at 20, 25, 30 and 35º C. Using a Potter tower, 2 mL of fungus suspension from each treatment was inoculated to the Diatraea saccharalis caterpillars. Regarding the sporulation, the largest concentrations of M. anisopliae and B. bassiana were found for the treatments with parboiled rice, type-1 rice, type-2 rice, yellow corn flour, corn flour and crushed wheat. The viability of all treatments was superior to 94.00%. Also, the longer the duration of the exposition to the UV, the smaller the number of fertile conidia. At 35o C, a significant loss of conidia viability was observed, and all the treatments presented some level of virulence.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

As mudanças climáticas causadas pela degradação da camada de ozônio e pelo aumento da emissão de gases causadores do efeito estufa, podem ocasionar alterações não somente aos seres humanos, mamíferos, répteis ou aves, mas também aos microrganismos. Dentro deste contexto, o aumento nos níveis de radiação solar incidente na superfície da Terra pode afetar as interações que ocorrem entre bactérias e plantas, alterando tanto a ocorrência de doenças como as interações benéficas entre estes organismos. Muitos são os gêneros de bactérias que interagem com as plantas, colonizando os mais diferentes nichos presentes neste hospedeiro. Dentre os grupos bacterianos destacam-se os gêneros Bacillus sp e Pseudomonas sp, que possuem efeitos benéficos como a promoção de crescimento vegetal e a proteção de plantas contra doenças e pragas. Dessa forma, o atual trabalho tem a princípio, como enfoque, constatar a resistência de isolados dos dois gêneros mencionados, à radiação ultravioleta C (200 a 250 nm). Os resultados obtidos demonstram maior resistência da linhagem de Bacillus sp à radiação ultravioleta C em comparação à linhagem de Pseudomonas sp. fato que possivelmente está relacionado com a capacidade de produzir esporos, característica do gênero Bacillus. Este trabalho fornece dados iniciais para futuras avaliações do comportamento destas bactérias quando em interação com plantas e sob maiores níveis de radiação ultravioleta no ambiente.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Relevância:

70.00% 70.00%

Publicador:

Resumo:

A malha rodoviária brasileira apresenta-se, em sua maior extensão, em má condições de serventia. Uma das alternativas para se evitar deformações permanentes e trincamentos no pavimento é a adição, a quente e em reatores especiais, de polímeros ao asfalto. Esta prática já é realizada no Brasil há alguns anos, porém ainda não se tem um domínio do assunto, principalmente no caso da modificação de ligantes asfálticos brasileiros. O objetivo deste trabalho é avaliar a influência de algumas propriedades do polímero modificador no envelhecimento do ligante asfáltico modificado. Para tanto se realizou inicialmente um estudo sobre o mecanismo de envelhecimento de ligantes puros, inclusive frente a radiação ultravioleta do sol, e em seguida utilizou-se a mesma metodologia para avaliar o papel do polímero neste processo. Além disso, relacionou-se através de um projeto de experimentos a massa molar e teor de estireno do polímero SBS linear com suas propriedades clássicas, estabilidade, temperatura de transição vítrea e morfologia. Observou-se que a simulação de envelhecimento UV em laboratório, desenvolvida neste estudo, foi extremamente satisfatória. Os processos de foto-oxidação e termooxidação resultam em mecanismos diferentes de envelhecimento. A origem e composição química dos ligantes é de suma importância no mecanismo de envelhecimento UV destes. A massa molar e o teor de estireno do polímero modificador representam propriedades importantes para a estabilidade e durabilidade do ligante asfáltico modificado.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Consultoria Legislativa - Área XVI - Saúde Pública, Sanitarismo.