A work-based research assessment of the impact of 'lean manufacturing' on health and safety education within an SME

Globalisation has had a major impact on the engineering industry as pacific Rim countries undercut manufacturing costs and provide a more cost-effective location for many businesses. Engineering in Nortehrn Ireland has mostly declined owing to increased competition from these countries. Engineering companies are now forced to streamline their production processes and employ cost-reducing practices in order to meet customer demands at reduced prices. This article aims to analyse the effects of one such streamlining endeavour which was first introduced after World War II in Japan- 'lean manufacturing' . 'Lean manufacturing' aims to reduce all wasteful activities within the production process in order to improve productivity, while reducing manufacturing costs. The work-based project under consideration was concerned with the impact 'lean manufacturing' may have on health and safety performance and education within an engineering company. The focus of the project was to determine through work-based research, and quantitative analysis, the employee perception on health and safety: has it changed (either positively or negatively), as a consequence of implementing 'lean manufacturing'.

Lean learning academy: an innovative framework for lean manufacturing training

Worldwide competitiveness poses enormous challenges on managers, demanding a continuous quest to increase rationality in the use of resources. As a management philosophy, Lean Manufacturing focuses on the elimination of activities that do not create any type of value and therefore are considered waste. For companies to successfully implement the Lean Manufacturing philosophy it is crucial that the human resources of the organization have the necessary training, for which proper tools are required. At the same time, higher education institutions need innovative tools to increase the attractiveness of engineering curricula and develop a higher level of knowledge among students, improving their employability. This paper describes how Lean Learning Academy, an international collaboration project between five EU universities and five companies, from SME to Multinational/Global companies, developed and applied an innovative training programme for Engineers on Lean Manufacturing, a successful alternative to the traditional teaching methods in engineering courses.

Implementation of global make to inventory strategy at BASF SE

La optimización y armonización son factores clave para tener un buen desempeño en la industria química. BASF ha desarrollado un proyecto llamada acelerador. El objetivo de este proyecto ha sido la armonización y la integración de los procesos de la cadena de suministro a nivel mundial. El proceso básico de manejo de inventarios se quedó fuera del proyecto y debía ser analizado. El departamento de manejo de inventarios en BASF SE ha estado desarrollando su propia estrategia para la definición de procesos globales de manufactura. En este trabajo se presentará un informe de las fases de la formulación de la estrategia y establecer algunas pautas para la fase de implementación que está teniendo lugar en 2012 y 2013.

Environmental management and operational performance in automotive companies in Brazil: The role of human resource management and lean manufacturing

The main objective of this study is to verify the influence of Environmental Management (EM) on Operational Performance (OP) in Brazilian automotive companies, analyzing whether Lean Manufacturing (LM) and Human Resources (HR) interfere in the greening of these companies. Therefore, a conceptual framework listing these concepts was proposed, and three research hypotheses were presented. A questionnaire was elaborated based on this theoretical background and sent to respondents occupying the highest positions in the production/operations areas of Brazilian automotive companies. The data, collected from 75 companies, were analyzed using structural equation modeling. The main results are as follows: (a) the model tested revealed an adequate goodness of fit, showing that overall, the relations proposed between EM and OP and between HR, LM and EM tend to be statistically valid; (b) EM tends to influence OP in a positive and statistically weak manner; (c) LM has a greater influence on EM when compared to the influence HR has over EM; (d) HR has a positive relationship over EM, but the statistical significance of this relationship is less than that of the other evaluated relationships. The originality of this paper lies in its gathering the concepts of EM, LM, HR and OP in a single study, as they generally tend not to be treated jointly. This paper also provided valid empirical evidence for a littlestudied context: the Brazilian automotive sector. © 2012 Elsevier Ltd. All rights reserved.

Integração dos programas de melhoria Lean Manufacturing e Six Sigma aplicados à logística de transporte de produtos de uma indústria metalúrgica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Plano para implementação dos princípios lean manufacturing em microempresas alimentícias

Nowadays, being prepared for competition is a basic demand for companies to survive and expand their businesses, requiring more and more productivity enhancements and costs reductions without interfering in the products quality. Thus, it is very important to have a solid management system adapted to each specific market and industrial sector. With that, many companies invest in studies to optimize its processes aiming to increase production. This work has the goal to present a deployment plan to Lean Manufacturing principles on a small fast food enterprise. The methodology consisted on a bibliographic research followed by an observation of the daily reality and problems found in loco. The study showed that the Lean principles can be a competitive advantage when applying the plan on new processes and enable changes on old methods already implemented by the organization. Besides that, contribute to a productivity enhancement and consequently the employee's motivation

Extending lean manufacturing in supply chains: a successful case in Brazil

Purpose – The purpose of this paper is to present the results of a success story involving the extending of lean manufacturing practices between a focal firm and its supplier, both located in Brazil, thereby configuring a case of excellence. Design/methodology/approach – An in-depth case study was conducted involving two companies: Company A, focal, leader in its segment, located in Brazil; and Company B, Company A's supplier, also located in Brazil. Findings – Results indicate there are several mechanisms for extending lean manufacturing practices in the supply chain, such as workshops, training, and integrated teams. These mechanisms are shown and guidelines are also introduced for companies seeking to successfully extend lean manufacturing practices. Originality/value – An original use of define, measure, analyze, improve, control for structuring the extending of lean manufacturing practices to suppliers and, consequently, the importance of the lean six-sigma relationship in this context. Furthermore, the guidelines introduced serve as a benchmark for other companies interested in the topic.

Production Streamlining through Design, Implementation, and Analysis of Lean Manufacturing Methods

Through the correct implementation of lean manufacturing methods, a company can greatly improve their business. Over a period of three months at TTM Technologies, I utilized my knowledge to fix existing problems ans streamline production. In addition, other trouble areas in their production process were discovered and proper lean methods were used to address them. TTM Technologies saw many changed in the right direction over this time period.

The design of a support department simulator for use in the design of manufacturing systems

Manufacturing firms are driven by competitive pressures to continually improve the effectiveness and efficiency of their organisations. For this reason, manufacturing engineers often implement changes to existing processes, or design new production facilities, with the expectation of making further gains in manufacturing system performance. This thesis relates to how the likely outcome of this type of decision should be predicted prior to its implementation. The thesis argues that since manufacturing systems must also interact with many other parts of an organisation, the expected performance improvements can often be significantly hampered by constraints that arise elsewhere in the business. As a result, decision-makers should attempt to predict just how well a proposed design will perform when these other factors, or 'support departments', are taken into consideration. However, the thesis also demonstrates that, in practice, where quantitative analysis is used to evaluate design decisions, the analysis model invariably ignores the potential impact of support functions on a system's overall performance. A more comprehensive modelling approach is therefore required. A study of how various business functions interact establishes that to properly represent the kind of delays that give rise to support department constraints, a model should actually portray the dynamic and stochastic behaviour of entities in both the manufacturing and non-manufacturing aspects of a business. This implies that computer simulation be used to model design decisions but current simulation software does not provide a sufficient range of functionality to enable the behaviour of all of these entities to be represented in this way. The main objective of the research has therefore been the development of a new simulator that will overcome limitations of existing software and so enable decision-makers to conduct a more holistic evaluation of design decisions. It is argued that the application of object-oriented techniques offers a potentially better way of fulfilling both the functional and ease-of-use issues relating to development of the new simulator. An object-oriented analysis and design of the system, called WBS/Office, are therefore presented that extends to modelling a firm's administrative and other support activities in the context of the manufacturing system design process. A particularly novel feature of the design is the ability for decision-makers to model how a firm's specific information and document processing requirements might hamper shop-floor performance. The simulator is primarily intended for modelling make-to-order batch manufacturing systems and the thesis presents example models created using a working version of WBS/Office that demonstrate the feasibility of using the system to analyse manufacturing system designs in this way.

Emberi erőforrás menedzsment és gyakorlatai a lean termelésben – a tevékenységmenedzsment irodalmának tükrében = Human resource management and practices in lean manufacturing – review of Operations Management’s literature

A lean bevezetése nem korlátozódik a termelés újraértelmezésére, hanem jellemzően a vállalati belső működés (számvitel, emberi erőforrás, beszerzés) és külső kapcsolatok (beszállítók, ellátási lánc) újszervezését is megköveteli. Ezek a kapcsolódási pontok számos, tudományterületek határán fekvő kutatási irányt nyitnak meg. Ebben a tanulmányban a lean termelés és a belső működéshez sorolt emberi erőforrás menedzsment kapcsolatára fókuszálok. Célom, hogy a tevékenységmenedzsment vonatkozó irodalmának áttekintésével bemutassam a lean termelés logikájához illeszkedő emberi erőforrás menedzsmentet, annak jellemző gyakorlatait. = Lean goes beyond manufacturing, implementing its principles usually requires companies to reorganize their companywide internal operations (accounting, human resource, purchasing) and also external relations (supplier, supply chain). This linkages offer several multidisciplinary research directions, this study focuses on the relationship between human resource management and lean production. The main aim of this working paper is to review Operations Management’s literatures on this issue and present the human resource policy and its practices that fit and support lean production.

Methodology to create cost estimation models for engineer-to-order operations

This research addresses the problem of cost estimation for product development in engineer-to-order (ETO) operations. An ETO operation starts the product development process with a product specification and ends with delivery of a rather complicated, highly customized product. ETO operations are practiced in various industries such as engineering tooling, factory plants, industrial boilers, pressure vessels, shipbuilding, bridges and buildings. ETO views each product as a delivery item in an industrial project and needs to make an accurate estimation of its development cost at the bidding and/or planning stage before any design or manufacturing activity starts. ^ Many ETO practitioners rely on an ad hoc approach to cost estimation, with use of past projects as reference, adapting them to the new requirements. This process is often carried out on a case-by-case basis and in a non-procedural fashion, thus limiting its applicability to other industry domains and transferability to other estimators. In addition to being time consuming, this approach usually does not lead to an accurate cost estimate, which varies from 30% to 50%. ^ This research proposes a generic cost modeling methodology for application in ETO operations across various industry domains. Using the proposed methodology, a cost estimator will be able to develop a cost estimation model for use in a chosen ETO industry in a more expeditious, systematic and accurate manner. ^ The development of the proposed methodology was carried out by following the meta-methodology as outlined by Thomann. Deploying the methodology, cost estimation models were created in two industry domains (building construction and the steel milling equipment manufacturing). The models are then applied to real cases; the cost estimates are significantly more accurate than the actual estimates, with mean absolute error rate of 17.3%. ^ This research fills an important need of quick and accurate cost estimation across various ETO industries. It differs from existing approaches to the problem in that a methodology is developed for use to quickly customize a cost estimation model for a chosen application domain. In addition to more accurate estimation, the major contributions are in its transferability to other users and applicability to different ETO operations. ^

Virtual-Build-to-Order as a Mass Customization Order Fulfilment Model

Virtual-build-to-order (VBTO) is a form of order fulfilment system in which the producer has the ability to search across the entire pipeline of finished stock, products in production and those in the production plan, in order to find the best product for a customer. It is a system design that is attractive to Mass Customizers, such as those in the automotive sector, whose manufacturing lead time exceeds their customers' tolerable waiting times, and for whom the holding of partly-finished stocks at a fixed decoupling point is unattractive or unworkable. This paper describes and develops the operational concepts that underpin VBTO, in particular the concepts of reconfiguration flexibility and customer aversion to waiting. Reconfiguration is the process of changing a product's specification at any point along the order fulfilment pipeline. The extent to which an order fulfilment system is flexible or inflexible reveals itself in the reconfiguration cost curve, of which there are four basic types. The operational features of the generic VBTO system are described and simulation is used to study its behaviour and performance. The concepts of reconfiguration flexibility and floating decoupling point are introduced and discussed.

Using information flow model to specify the Kanban-controlled shopfloor control system

The implementation of Kanban-based production control systems may be difficult in make-to-order environments such as job shops. The flexible manufacturing approach constitutes a promising solution to adapt the Kanban method to such environments. This paper presents an information flow modelling approach for specifying the operational planning and control functions of the Kanban-controlled shopfloor control system (KSCS) in a flexible manufacturing environment. By decomposing the KSCS control functionalities, we have created the system information flow model through the data flow diagrams of Structured Systems Analysis Methodology. The data flow diagrams serve effective system specifications for communicating the system operations to participants of different disciplines as well as the system model for the design and development of KSCS.