Thin film deposition and characterization of pure and iron-doped electron-beam evaporated tungsten oxide for gas sensors

Pure Tungsten Oxide (WO3) and Iron-doped (10 at%) Tungsten Oxide (WO3:Fe) nanostructured thin films were prepared using a dual crucible Electron Beam Evaporation techniques. The films were deposited at room temperature in high vacuum condition on glass substrate and post-heat treated at 300 oC for 1 hour. From the study of X-ray diffraction and Raman the characteristics of the as-deposited WO3 and WO3:Fe films indicated non-crystalline nature. The surface roughness of all the films showed in the order of 2.5 nm as observed using Atomic Force Microscopy (AFM). X-Ray Photoelectron Spectroscopy (XPS) analysis revealed tungsten oxide films with stoichiometry close to WO3. The addition of Fe to WO3 produced a smaller particle size and lower porosity as observed using Transmission Electron Microscopy (TEM). A slight difference in optical band gap energies of 3.22 eV and 3.12 eV were found between the as-deposited WO3 and WO3:Fe films, respectively. However, the difference in the band gap energies of the annealed films were significantly higher having values of 3.12 eV and 2.61 eV for the WO3 and WO3:Fe films, respectively. The heat treated samples were investigated for gas sensing applications using noise spectroscopy and doping of Fe to WO3 reduced the sensitivity to certain gasses. Detailed study of the WO3 and WO3:Fe films gas sensing properties is the subject of another paper.

The rate-limiting mechanism for the heterogeneous burning of cylindrical iron rods

This paper presents the findings of an investigation into the rate-limiting mechanism for the heterogeneous burning in oxygen under normal gravity and microgravity of cylindrical iron rods. The original objective of the work was to determine why the observed melting rate for burning 3.2-mm diameter iron rods is significantly higher in microgravity than in normal gravity. This work, however, also provided fundamental insight into the rate-limiting mechanism for heterogeneous burning. The paper includes a summary of normal-gravity and microgravity experimental results, heat transfer analysis and post-test microanalysis of quenched samples. These results are then used to show that heat transfer across the solid/liquid interface is the rate-limiting mechanism for melting and burning, limited by the interfacial surface area between the molten drop and solid rod. In normal gravity, the work improves the understanding of trends reported during standard flammability testing for metallic materials, such as variations in melting rates between test specimens with the same cross-sectional area but different crosssectional shape. The work also provides insight into the effects of configuration and orientation, leading to an improved application of standard test results in the design of oxygen system components. For microgravity applications, the work enables the development of improved methods for lower cost metallic material flammability testing programs. In these ways, the work provides fundamental insight into the heterogeneous burning process and contributes to improved fire safety for oxygen systems in applications involving both normal-gravity and microgravity environments.

Iron burning in pressurised oxygen under microgravity conditions

An investigation of cylindrical iron rods burning in pressurised oxygen under microgravity conditions is presented. It has been shown that, under similar experimental conditions, the melting rate of a burning, cylindrical iron rod is higher in microgravity than in normal gravity by a factor of 1.8 ± 0.3. This paper presents microanalysis of quenched samples obtained in a microgravity environment in a 2.0 s duration drop tower facility in Brisbane, Australia. These images indicate that the solid/liquid interface is highly convex in reduced gravity, compared to the planar geometry typically observed in normal gravity, which increases the contact area between liquid and solid phases by a factor of 1.7 ± 0.1. Thus, there is good agreement between the proportional increase in solid/liquid interface surface area and melting rate in microgravity. This indicates that the cause of the increased melting rates for cylindrical iron rods burning in microgravity is altered interfacial geometry at the solid/liquid interface.

Unpacking Japan's 21st century "National Conversation" : images of the future beyond the iron cage of the "Catch Up" model

How does the image of the future operate upon history, and upon national and individual identities? To what extent are possible futures colonized by the image? What are the un-said futurecratic discourses that underlie the image of the future? Such questions inspired the examination of Japan’s futures images in this thesis. The theoretical point of departure for this examination is Polak’s (1973) seminal research into the theory of the ‘image of the future’ and seven contemporary Japanese texts which offer various alternative images for Japan’s futures, selected as representative of a ‘national conversation’ about the futures of that nation. These seven images of the future are: 1. Report of the Prime Minister’s Commission on Japan’s Goals in the 21st Century—The Frontier Within: Individual Empowerment and Better Governance in the New Millennium, compiled by a committee headed by Japan’s preeminent Jungian psychologist Kawai Hayao (1928-2007); 2. Slow Is Beautiful—a publication by Tsuji Shinichi, in which he re-images Japan as a culture represented by the metaphor of the sloth, concerned with slow and quality-oriented livingry as a preferred image of the future to Japan’s current post-bubble cult of speed and economic efficiency; 3. MuRatopia is an image of the future in the form of a microcosmic prototype community and on-going project based on the historically significant island of Awaji, and established by Japanese economist and futures thinker Yamaguchi Kaoru; 4. F.U.C.K, I Love Japan, by author Tanja Yujiro provides this seven text image of the future line-up with a youth oriented sub-culture perspective on that nation’s futures; 5. IMAGINATION / CREATION—a compilation of round table discussions about Japan’s futures seen from the point of view of Japan’s creative vanguard; 6. Visionary People in a Visionless Country: 21 Earth Connecting Human Stories is a collection of twenty one essays compiled by Denmark born Tokyo resident Peter David Pedersen; and, 7. EXODUS to the Land of Hope, authored by Murakami Ryu, one of Japan’s most prolific and influential writers, this novel suggests a future scenario portraying a massive exodus of Japan’s youth, who, literate with state-of-the-art information and communication technologies (ICTs) move en masse to Japan’s northern island of Hokkaido to launch a cyber-revolution from the peripheries. The thesis employs a Futures Triangle Analysis (FTA) as the macro organizing framework and as such examines both pushes of the present and weights from the past before moving to focus on the pulls to the future represented by the seven texts mentioned above. Inayatullah’s (1999) Causal Layered Analysis (CLA) is the analytical framework used in examining the texts. Poststructuralist concepts derived primarily from the work of Michel Foucault are a particular (but not exclusive) reference point for the analytical approach it encompasses. The research questions which reflect the triangulated analytic matrix are: 1. What are the pushes—in terms of current trends—that are affecting Japan’s futures? 2. What are the historical and cultural weights that influence Japan’s futures? 3. What are the emerging transformative Japanese images of the future discourses, as embodied in actual texts, and what potential do they offer for transformative change in Japan? Research questions one and two are discussed in Chapter five and research question three is discussed in Chapter six. The first two research questions should be considered preliminary. The weights outlined in Chapter five indicate that the forces working against change in Japan are formidable, structurally deep-rooted, wide-spread, and under-recognized as change-adverse. Findings and analyses of the push dimension reveal strong forces towards a potentially very different type of Japan. However it is the seven contemporary Japanese images of the future, from which there is hope for transformative potential, which form the analytical heart of the thesis. In analyzing these texts the thesis establishes the richness of Japan’s images of the future and, as such, demonstrates the robustness of Japan’s stance vis-à-vis the problem of a perceived map-less and model-less future for Japan. Frontier is a useful image of the future, whose hybrid textuality, consisting of government, business, academia, and creative minority perspectives, demonstrates the earnestness of Japan’s leaders in favour of the creation of innovative futures for that nation. Slow is powerful in its aim to reconceptualize Japan’s philosophies of temporality, and build a new kind of nation founded on the principles of a human-oriented and expanded vision of economy based around the core metaphor of slowness culture. However its viability in Japan, with its post-Meiji historical pushes to an increasingly speed-obsessed social construction of reality, could render it impotent. MuRatopia is compelling in its creative hybridity indicative of an advanced IT society, set in a modern day utopian space based upon principles of a high communicative social paradigm, and sustainability. IMAGINATION / CREATION is less the plan than the platform for a new discussion on Japan’s transformation from an econo-centric social framework to a new Creative Age. It accords with emerging discourses from the Creative Industries, which would re-conceive of Japan as a leading maker of meaning, rather than as the so-called guzu, a term referred to in the book meaning ‘laggard’. In total, Love Japan is still the most idiosyncratic of all the images of the future discussed. Its communication style, which appeals to Japan’s youth cohort, establishes it as a potentially formidable change agent in a competitive market of futures images. Visionary People is a compelling image for its revolutionary and subversive stance against Japan’s vision-less political leadership, showing that it is the people, not the futures-making elite or aristocracy who must take the lead and create a new vanguard for the nation. Finally, Murakami’s Exodus cannot be ruled out as a compelling image of the future. Sharing the appeal of Tanja’s Love Japan to an increasingly disenfranchised youth, Exodus portrays a near-term future that is achievable in the here and now, by Japan’s teenagers, using information and communications technologies (ICTs) to subvert leadership, and create utopianist communities based on alternative social principles. The principal contribution from this investigation in terms of theory belongs to that of developing the Japanese image of the future. In this respect, the literature reviews represent a significant compilation, specifically about Japanese futures thinking, the Japanese image of the future, and the Japanese utopia. Though not exhaustive, this compilation will hopefully serve as a useful starting point for future research, not only for the Japanese image of the future, but also for all image of the future research. Many of the sources are in Japanese and their English summations are an added reason to respect this achievement. Secondly, the seven images of the future analysed in Chapter six represent the first time that Japanese image of the future texts have been systematically organized and analysed. Their translation from Japanese to English can be claimed as a significant secondary contribution. What is more, they have been analysed according to current futures methodologies that reveal a layeredness, depth, and overall richness existing in Japanese futures images. Revealing this image-richness has been one of the most significant findings of this investigation, suggesting that there is fertile research to be found from this still under-explored field, whose implications go beyond domestic Japanese concerns, and may offer fertile material for futures thinkers and researchers, Japanologists, social planners, and policy makers.

Photocatalytic hydrogen production with iron oxide under solar irradiation

As solar hydrogen is a sustainable and environmental friendly energy carrier, it is considered to take the place of fossil fuels in the near future. Solar hydrogen can be generated by splitting of water under solar light illumination. In this study, the use of nanostructured hematite thin-film electrodes in photocatalytic water splitting was investigated. Hematite (á-Fe2O3) has a narrow band-gap of 2.2 eV, which is able to utilise approximately 40% of solar radiation. However, poor photoelectrochemical performance is observed for hematite due to low electrical conductivity and a high rate of electron-hole recombination. An extensive review of useful measures taken to overcoming the disadvantages of hematite so as to enhance its performance was presented including thin-film structure, nanostructuring, doping, etc. Since semiconductoring materials which exhibit an inverse opal structure are expected to have a high surface-volume ratio, unique optical characteristics and a shorter distance for photogenerated holes to travel to the electrode/electrolyte interface, inverse opals of hematite thin films deposited on FTO glass substrate were successfully prepared by doctor blading using PMMA as a template. However, due to the poor adhesion of the films, an acidic medium (i.e., 2 M HCl) was employed to significantly enhance the adhesion of the films, which completely destroyed the inverse opal structure. Therefore, undoped, Ti and Zn-doped hematite thin films deposied on FTO glass substrate without an inverse opal structure were prepared by doctor blading and spray pyrolysis and characterised using SEM, EDX, XRD, TGA, UV-Vis spectroscopy and photoelectrochemical measurements. Regarding the doped hematite thin films prepared by doctor blading, the photoelectrochemical activity of the hematite photoelectrodes was improved by incorporation of Ti, most likely owing to the increased electrical conductivity of the films, the stabilisation of oxygen vacancies by Ti4+ ions and the increased electric field of the space charge layer. A highest photoresponse was recorded in case of 2.5 at.% Ti which seemed to be an optimal concentration. The effect of doping content, thickness, and calcination temperature on the performance of the Ti-doped photoelectrodes was investigated. Also, the photoactivity of the 2.5 at.% Ti-doped samples was examined in two different types of electrochemical cells. Zn doping did not enhance the photoactivity of the hematite thin films though Zn seemed to enhance the hole transport due to the slow hole mobility of hematite which could not be overcome by the enhancement. The poor performance was also obtained for the Ti-doped samples prepared by spray pyrolysis, which appeared to be a result of introduction of impurities from the metallic parts of the spray gun in an acidic medium. Further characterisation of the thin-film electrodes is required to explain the mechanism by which enhanced performance was obtained for Ti-doped electrodes (doctor blading) and poor photoactivity for Zn and Ti-doped samples which were synthesised by doctor blading and spray pyrolysis, respectively. Ti-doped hematite thin films will be synthesised in another way, such as dip coating so as to maintain an inverse opal structure as well as well adhesion. Also, a comparative study of the films will be carried out.