192 resultados para interruptions


Relevância:

10.00% 10.00%

Publicador:

Resumo:

La fisuración iniciada en la superficie de los pavimentos asfálticos constituye uno de los más frecuentes e importantes modos de deterioro que tienen lugar en los firmes bituminosos, como han demostrado los estudios teóricos y experimentales llevados a cabo en la última década. Sin embargo, este mecanismo de fallo no ha sido considerado por los métodos tradicionales de diseño de estos firmes. El concepto de firmes de larga duración se fundamenta en un adecuado seguimiento del proceso de avance en profundidad de estos deterioros y la intervención en el momento más apropiado para conseguir mantenerlos confinados como fisuras de profundidad parcial en la capa superficial más fácilmente accesible y reparable, de manera que pueda prolongarse la durabilidad y funcionalidad del firme y reducir los costes generalizados de su ciclo de vida. Por lo tanto, para la selección de la estrategia óptima de conservación de los firmes resulta esencial disponer de metodologías que posibiliten la identificación precisa in situ de la fisuración descendente, su seguimiento y control, y que además permitan una determinación fiable y con alto rendimiento de su profundidad y extensión. En esta Tesis Doctoral se presentan los resultados obtenidos mediante la investigación sistemática de laboratorio e in situ llevada a cabo para la obtención de datos sobre fisuración descendente en firmes asfálticos y para el estudio de procedimientos de evaluación de la profundidad de este tipo de fisuras empleando técnicas de ultrasonidos. Dichos resultados han permitido comprobar que la metodología no destructiva propuesta, de rápida ejecución, bajo coste y sencilla implementación (principalmente empleada hasta el momento en estructuras metálicas y de hormigón, debido a las dificultades que introduce la naturaleza viscoelástica de los materiales bituminosos) puede ser aplicada con suficiente fiabilidad y repetibilidad sobre firmes asfálticos. Las medidas resultan asimismo independientes del espesor total del firme. Además, permite resolver algunos de los inconvenientes frecuentes que presentan otros métodos de diagnóstico de las fisuras de pavimentos, tales como la extracción de testigos (sistema destructivo, de alto coste y prolongados tiempos de interrupción del tráfico) o algunas otras técnicas no destructivas como las basadas en medidas de deflexiones o el georradar, las cuales no resultan suficientemente precisas para la investigación de fisuras superficiales. Para ello se han realizado varias campañas de ensayos sobre probetas de laboratorio en las que se han estudiado diferentes condiciones empíricas como, por ejemplo, distintos tipos de mezclas bituminosas en caliente (AC, SMA y PA), espesores de firme y adherencias entre capas, temperaturas, texturas superficiales, materiales de relleno y agua en el interior de las grietas, posición de los sensores y un amplio rango de posibles profundidades de fisura. Los métodos empleados se basan en la realización de varias medidas de velocidad o de tiempo de transmisión del pulso ultrasónico sobre una única cara o superficie accesible del material, de manera que resulte posible obtener un coeficiente de transmisión de la señal (mediciones relativas o autocompensadas). Las mediciones se han realizado a bajas frecuencias de excitación mediante dos equipos de ultrasonidos diferentes dotados, en un caso, de transductores de contacto puntual seco (DPC) y siendo en el otro instrumento de contacto plano a través de un material especialmente seleccionado para el acoplamiento (CPC). Ello ha permitido superar algunos de los tradicionales inconvenientes que presenta el uso de los transductores convencionales y no precisar preparación previa de las superficies. La técnica de autocalibración empleada elimina los errores sistemáticos y la necesidad de una calibración local previa, demostrando el potencial de esta tecnología. Los resultados experimentales han sido comparados con modelos teóricos simplificados que simulan la propagación de las ondas ultrasónicas en estos materiales bituminosos fisurados, los cuales han sido deducidos previamente mediante un planteamiento analítico y han permitido la correcta interpretación de dichos datos empíricos. Posteriormente, estos modelos se han calibrado mediante los resultados de laboratorio, proporcionándose sus expresiones matemáticas generalizadas y gráficas para su uso rutinario en las aplicaciones prácticas. Mediante los ensayos con ultrasonidos efectuados en campañas llevadas a cabo in situ, acompañados de la extracción de testigos del firme, se han podido evaluar los modelos propuestos. El máximo error relativo promedio en la estimación de la profundidad de las fisuras al aplicar dichos modelos no ha superado el 13%, con un nivel de confianza del 95%, en el conjunto de todos los ensayos realizados. La comprobación in situ de los modelos ha permitido establecer los criterios y las necesarias recomendaciones para su utilización sobre firmes en servicio. La experiencia obtenida posibilita la integración de esta metodología entre las técnicas de auscultación para la gestión de su conservación. Abstract Surface-initiated cracking of asphalt pavements constitutes one of the most frequent and important types of distress that occur in flexible bituminous pavements, as clearly has been demonstrated in the technical and experimental studies done over the past decade. However, this failure mechanism has not been taken into consideration for traditional methods of flexible pavement design. The concept of long-lasting pavements is based on adequate monitoring of the depth and extent of these deteriorations and on intervention at the most appropriate moment so as to contain them in the surface layer in the form of easily-accessible and repairable partial-depth topdown cracks, thereby prolonging the durability and serviceability of the pavement and reducing the overall cost of its life cycle. Therefore, to select the optimal maintenance strategy for perpetual pavements, it becomes essential to have access to methodologies that enable precise on-site identification, monitoring and control of top-down propagated cracks and that also permit a reliable, high-performance determination of the extent and depth of cracking. This PhD Thesis presents the results of systematic laboratory and in situ research carried out to obtain information about top-down cracking in asphalt pavements and to study methods of depth evaluation of this type of cracking using ultrasonic techniques. These results have demonstrated that the proposed non-destructive methodology –cost-effective, fast and easy-to-implement– (mainly used to date for concrete and metal structures, due to the difficulties caused by the viscoelastic nature of bituminous materials) can be applied with sufficient reliability and repeatability to asphalt pavements. Measurements are also independent of the asphalt thickness. Furthermore, it resolves some of the common inconveniences presented by other methods used to evaluate pavement cracking, such as core extraction (a destructive and expensive procedure that requires prolonged traffic interruptions) and other non-destructive techniques, such as those based on deflection measurements or ground-penetrating radar, which are not sufficiently precise to measure surface cracks. To obtain these results, extensive tests were performed on laboratory specimens. Different empirical conditions were studied, such as various types of hot bituminous mixtures (AC, SMA and PA), differing thicknesses of asphalt and adhesions between layers, varied temperatures, surface textures, filling materials and water within the crack, different sensor positions, as well as an ample range of possible crack depths. The methods employed in the study are based on a series of measurements of ultrasonic pulse velocities or transmission times over a single accessible side or surface of the material that make it possible to obtain a signal transmission coefficient (relative or auto-calibrated readings). Measurements were taken at low frequencies by two short-pulse ultrasonic devices: one equipped with dry point contact transducers (DPC) and the other with flat contact transducers that require a specially-selected coupling material (CPC). In this way, some of the traditional inconveniences presented by the use of conventional transducers were overcome and a prior preparation of the surfaces was not required. The auto-compensating technique eliminated systematic errors and the need for previous local calibration, demonstrating the potential for this technology. The experimental results have been compared with simplified theoretical models that simulate ultrasonic wave propagation in cracked bituminous materials, which had been previously deduced using an analytical approach and have permitted the correct interpretation of the aforementioned empirical results. These models were subsequently calibrated using the laboratory results, providing generalized mathematical expressions and graphics for routine use in practical applications. Through a series of on-site ultrasound test campaigns, accompanied by asphalt core extraction, it was possible to evaluate the proposed models, with differences between predicted crack depths and those measured in situ lower than 13% (with a confidence level of 95%). Thereby, the criteria and the necessary recommendations for their implementation on in-service asphalt pavements have been established. The experience obtained through this study makes it possible to integrate this methodology into the evaluation techniques for pavement management systems.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work we investigated whether there is a relationship between dominant behaviour of dialogue participants and their verbal intelligence. The analysis is based on a corpus containing 56 dialogues and verbal intelligence scores of the test persons. All the dialogues were divided into three groups: H-H is a group of dialogues between higher verbal intelligence participants, L-L is a group of dialogues between lower verbal intelligence participant and L-H is a group of all the other dialogues. The dominance scores of the dialogue partners from each group were analysed. The analysis showed that differences between dominance scores and verbal intelligence coefficients for L-L were positively correlated. Verbal intelligence scores of the test persons were compared to other features that may reflect dominant behaviour. The analysis showed that number of interruptions, long utterances, times grabbed the floor, influence diffusion model, number of agreements and several acoustic features may be related to verbal intelligence. These features were used for the automatic classification of the dialogue partners into two groups (lower and higher verbal intelligence participants); the achieved accuracy was 89.36%.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

El presente proyecto desarrolla una aplicación residente en un terminal móvil, que pretende proporcionar un valor añadido al actual proyecto Localiza, sistema de localización bajo demanda para personas con discapacidad severa. Mediante el desarrollo de este proyecto se pretende facilitar el acceso al teléfono móvil y al ordenador a las personas con discapacidad motriz. El objetivo final es ser capaz de controlar un teléfono móvil por medio de control remoto, mediante el uso de un ordenador personal. Para ello se establece una conexión remota entre el terminal móvil y el ordenador personal, a través del protocolo de comunicación Bluetooth. De este modo, a través de la aplicación móvil se transmite la información de posición de las coordenadas, proporcionada por el acelerómetro del terminal, a un servicio instalado en el ordenador que se encarga de gestionar la información recibida, y así crear las interrupciones pertinentes en el sistema operativo para mover el puntero del ratón. Para controlar el teléfono móvil de forma remota se dispondrá de un emulador de telefonía móvil instalado en el ordenador que implemente las funciones básicas de control de llamadas. Por medio de comunicación Bluetooth, las acciones que realice el usuario en emulador serán invocadas en el propio terminal móvil. SUMMARY. The project presented develops a mobile application, which is intended to provide an added value to the already existing project Localiza, on-demand position system for people with severe disabilities. This project aims to facilitate the access to the personal computer and to the mobile telephony environment for disabled people. The main goal is to be able to control a mobile phone by remote control, using a personal computer. Thus, a remote connexion will to be established between the mobile device and the personal computer, through Bluetooth communication protocol. Thus, the mobile application will transmit the coordinate’s position, provided by the accelerometer of the mobile device, to a Bluetooth service running in the personal computer. That service will be in charge of managing the information received in order to create the interruptions on the operational system for moving the mouse pointer. The remote controlling of the mobile device is carried out using a mobile telephony emulator installed in the personal computer, which will implement the basic functionality of calling control. Using Bluetooth communication, the user actions done in the emulator interface will be invoked on the mobile device itself.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

La gestión de los residuos radiactivos de vida larga producidos en los reactores nucleares constituye uno de los principales desafíos de la tecnología nuclear en la actualidad. Una posible opción para su gestión es la transmutación de los nucleidos de vida larga en otros de vida más corta. Los sistemas subcríticos guiados por acelerador (ADS por sus siglas en inglés) son una de las tecnologías en desarrollo para logar este objetivo. Un ADS consiste en un reactor nuclear subcrítico mantenido en un estado estacionario mediante una fuente externa de neutrones guiada por un acelerador de partículas. El interés de estos sistemas radica en su capacidad para ser cargados con combustibles que tengan contenidos de actínidos minoritarios mayores que los reactores críticos convencionales, y de esta manera, incrementar las tasas de trasmutación de estos elementos, que son los principales responsables de la radiotoxicidad a largo plazo de los residuos nucleares. Uno de los puntos clave que han sido identificados para la operación de un ADS a escala industrial es la necesidad de monitorizar continuamente la reactividad del sistema subcrítico durante la operación. Por esta razón, desde los años 1990 se han realizado varios experimentos en conjuntos subcríticos de potencia cero (MUSE, RACE, KUCA, Yalina, GUINEVERE/FREYA) con el fin de validar experimentalmente estas técnicas. En este contexto, la presente tesis se ocupa de la validación de técnicas de monitorización de la reactividad en el conjunto subcrítico Yalina-Booster. Este conjunto pertenece al Joint Institute for Power and Nuclear Research (JIPNR-Sosny) de la Academia Nacional de Ciencias de Bielorrusia. Dentro del proyecto EUROTRANS del 6º Programa Marco de la UE, en el año 2008 se ha realizado una serie de experimentos en esta instalación concernientes a la monitorización de la reactividad bajo la dirección del CIEMAT. Se han realizado dos tipos de experimentos: experimentos con una fuente de neutrones pulsada (PNS) y experimentos con una fuente continua con interrupciones cortas (beam trips). En el caso de los primeros, experimentos con fuente pulsada, existen dos técnicas fundamentales para medir la reactividad, conocidas como la técnica del ratio bajo las áreas de los neutrones inmediatos y retardados (o técnica de Sjöstrand) y la técnica de la constante de decaimiento de los neutrones inmediatos. Sin embargo, varios experimentos han mostrado la necesidad de aplicar técnicas de corrección para tener en cuenta los efectos espaciales y energéticos presentes en un sistema real y obtener valores precisos de la reactividad. En esta tesis, se han investigado estas correcciones mediante simulaciones del sistema con el código de Montecarlo MCNPX. Esta investigación ha servido también para proponer una versión generalizada de estas técnicas donde se buscan relaciones entre la reactividad el sistema y las cantidades medidas a través de simulaciones de Monte Carlo. El segundo tipo de experimentos, experimentos con una fuente continua e interrupciones del haz, es más probable que sea empleado en un ADS industrial. La versión generalizada de las técnicas desarrolladas para los experimentos con fuente pulsada también ha sido aplicada a los resultados de estos experimentos. Además, el trabajo presentado en esta tesis es la primera vez, en mi conocimiento, en que la reactividad de un sistema subcrítico se monitoriza durante la operación con tres técnicas simultáneas: la técnica de la relación entre la corriente y el flujo (current-to-flux), la técnica de desconexión rápida de la fuente (source-jerk) y la técnica del decaimiento de los neutrones inmediatos. Los casos analizados incluyen la variación rápida de la reactividad del sistema (inserción y extracción de las barras de control) y la variación rápida de la fuente de neutrones (interrupción larga del haz y posterior recuperación). ABSTRACT The management of long-lived radioactive wastes produced by nuclear reactors constitutes one of the main challenges of nuclear technology nowadays. A possible option for its management consists in the transmutation of long lived nuclides into shorter lived ones. Accelerator Driven Subcritical Systems (ADS) are one of the technologies in development to achieve this goal. An ADS consists in a subcritical nuclear reactor maintained in a steady state by an external neutron source driven by a particle accelerator. The interest of these systems lays on its capacity to be loaded with fuels having larger contents of minor actinides than conventional critical reactors, and in this way, increasing the transmutation rates of these elements, that are the main responsible of the long-term radiotoxicity of nuclear waste. One of the key points that have been identified for the operation of an industrial-scale ADS is the need of continuously monitoring the reactivity of the subcritical system during operation. For this reason, since the 1990s a number of experiments have been conducted in zero-power subcritical assemblies (MUSE, RACE, KUCA, Yalina, GUINEVERE/FREYA) in order to experimentally validate these techniques. In this context, the present thesis is concerned with the validation of reactivity monitoring techniques at the Yalina-Booster subcritical assembly. This assembly belongs to the Joint Institute for Power and Nuclear Research (JIPNR-Sosny) of the National Academy of Sciences of Belarus. Experiments concerning reactivity monitoring have been performed in this facility under the EUROTRANS project of the 6th EU Framework Program in year 2008 under the direction of CIEMAT. Two types of experiments have been carried out: experiments with a pulsed neutron source (PNS) and experiments with a continuous source with short interruptions (beam trips). For the case of the first ones, PNS experiments, two fundamental techniques exist to measure the reactivity, known as the prompt-to-delayed neutron area-ratio technique (or Sjöstrand technique) and the prompt neutron decay constant technique. However, previous experiments have shown the need to apply correction techniques to take into account the spatial and energy effects present in a real system and thus obtain accurate values for the reactivity. In this thesis, these corrections have been investigated through simulations of the system with the Monte Carlo code MCNPX. This research has also served to propose a generalized version of these techniques where relationships between the reactivity of the system and the measured quantities are obtained through Monte Carlo simulations. The second type of experiments, with a continuous source with beam trips, is more likely to be employed in an industrial ADS. The generalized version of the techniques developed for the PNS experiments has also been applied to the result of these experiments. Furthermore, the work presented in this thesis is the first time, to my knowledge, that the reactivity of a subcritical system has been monitored during operation simultaneously with three different techniques: the current-to-flux, the source-jerk and the prompt neutron decay techniques. The cases analyzed include the fast variation of the system reactivity (insertion and extraction of a control rod) and the fast variation of the neutron source (long beam interruption and subsequent recovery).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Multi party videoconference systems use MCU (Multipoint Control Unit) devices to forward media streams. In this paper we describe a mechanism that allows the mobility of such streams between MCU devices. This mobility is especially useful when redistribution of streams is needed due to scalability requirements. These requirements are mandatory in Cloud scenarios to adapt the number of MCUs and their capabilities to variations in the user demand. Our mechanism is based on TURN (Traversal Using Relay around NAT) standard and adapts MICE (Mobility with ICE) specification to the requirements of this kind of scenarios. We conclude that this mechanism achieves the stream mobility in a transparent way for client nodes and without interruptions for the users.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

There is increasing recognition that stochastic processes regulate highly predictable patterns of gene expression in developing organisms, but the implications of stochastic gene expression for understanding haploinsufficiency remain largely unexplored. We have used simulations of stochastic gene expression to illustrate that gene copy number and expression deactivation rates are important variables in achieving predictable outcomes. In gene expression systems with non-zero expression deactivation rates, diploid systems had a higher probability of uninterrupted gene expression than haploid systems and were more successful at maintaining gene product above a very low threshold. Systems with relatively rapid expression deactivation rates (unstable gene expression) had more predictable responses to a gradient of inducer than systems with slow or zero expression deactivation rates (stable gene expression), and diploid systems were more predictable than haploid, with or without dosage compensation. We suggest that null mutations of a single allele in a diploid organism could decrease the probability of gene expression and present the hypothesis that some haploinsufficiency syndromes might result from an increased susceptibility to stochastic delays of gene initiation or interruptions of gene expression.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Using precursor tRNA molecules to study RNA-protein interactions, we have identified an RNA motif recognized by eukaryotic RNase P (EC 3.1.26.5). Analysis of circularly permuted precursors indicates that interruptions in the sugar-phosphate backbone are not tolerated in the acceptor stem, in the T stem-loop, or between residues A-9 and G-10. Prokaryotic RNase P will function with a minihelix consisting of the acceptor stem connected directly to the T stem-loop. Eukaryotic RNase P cannot use such a minimal substrate unless a linker sequence is added in the gap where the D stem and anticodon stem-loop were deleted.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The bulk of this collection consists of brief records of civil actions heard by George Godfrey as a justice of the peace for Bristol County, Massachusetts. With only a few interruptions, these records run from February 1754 through the early 1780s. The other documents include several small volumes and loose pages of household accounts, as well as a handful of pages of court records and marriages heard by George Godfrey and his father, John Godfrey.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Miocene Climatic Optimum (~17-14.7 Ma) represents one of several major interruptions in the long-term cooling trend of the past 50 million years. To date, the processes driving high-amplitude climate variability and sustaining global warmth during this remarkable interval remain highly enigmatic. We present high-resolution benthic foraminiferal and bulk carbonate stable isotope records in an exceptional, continuous, carbonate-rich sedimentary archive (Integrated Ocean Drilling Program Site U1337, eastern equatorial Pacific Ocean), which offer a new view of climate evolution over the onset of the Climatic Optimum. A sharp decline in d18O and d13C at ~16.9 Ma, contemporaneous with a massive increase in carbonate dissolution, demonstrates that abrupt warming was coupled to an intense perturbation of the carbon cycle. The rapid recovery in d13C at ~16.7 Ma, ~200 k.y. after the beginning of the MCO, marks the onset of the first carbon isotope maximum within the long-lasting "Monterey Excursion". These results lend support to the notion that atmospheric pCO2 variations drove profound changes in the global carbon reservoir through the Climatic Optimum, implying a delicate balance between changing CO2 fluxes, rates of silicate weathering and global carbon sequestration. Comparison with a high-resolution d13C record spanning the onset of the Cretaceous Oceanic Anoxic Event 1a (~120 Ma ago) reveals common forcing factors and climatic responses, providing a long-term perspective to understand climate-carbon cycle feedbacks during warmer periods of Earth's climate with markedly different atmospheric CO2 concentrations.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thesis (Ph.D.)--University of Washington, 2016-06

Relevância:

10.00% 10.00%

Publicador:

Resumo:

With the increasing demand on healthcare systems it is imperative that all care is provided as efficiently and effectively as possible. Technology within the medical domain offers an exciting opportunity to augment work practices in order to meet these needs. This research project explores the implications of the interrupt-driven nature of work in clinical situations on documentation within an environment that increasingly involves electronic health records (EHRs). Midwives in a busy maternity ward were observed and interviewed about the work practices they employed to document information associated with patient care. The results showed that the interrupt-driven nature of the workplace, a feature common to many healthcare settings, led to a tension between the work and the work to document the work. Further, the IT environment in which the information was collected was not designed to cater for frequent interruption of the data entry process. Several recommendations for improving the IT environment are proposed to support health professionals in documenting patient data whilst attending to the interruptions. The recommendations include timeout screens, push technology, use of handheld PDAs, and cues to augment documentation in an interrupted session. Copyright © 2008 RMIT Publishing

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Third Generation cellular communication systems are expected to support mixed cell architecture in which picocells, microcells and macrocells are used to achieve full coverage and increase the spectral capacity. Supporting higher numbers of mobile terminals and the use of smaller cells will result in an increase in the number of handovers, and consequently an increase in the time delays required to perform these handovers. Higher time delays will generate call interruptions and forced terminations, particularly for time sensitive applications like real-time multimedia and data services. Currently in the Global System for Mobile communications (GSM), the handover procedure is initiated and performed by the fixed part of the Public Land Mobile Network (PLMN). The mobile terminal is only capable of detecting candidate base stations suitable for the handover; it is the role of the network to interrogate a candidate base station for a free channel. Handover signalling is exchanged via the fixed network and the time delay required to perform the handover is greatly affected by the levels of teletraffic handled by the network. In this thesis, a new handover strategy is developed to reduce the total time delay for handovers in a microcellular system. The handover signalling is diverted from the fixed network to the air interface to prevent extra delays due to teletraffic congestion, and to allow the mobile terminal to exchange signalling directly with the candidate base station. The new strategy utilises Packet Reservation Multiple Access (PRMA) technique as a mechanism to transfer the control of the handover procedure from the fixed network to the mobile terminal. Simulation results are presented to show a dramatic reduction in the handover delay as compared to those obtained using fixed channel allocation and dynamic channel allocation schemes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the following pages, three well-known Latinoamericanists share their views on the current prospects for coups in Latin America. They are: Rut Diamint of the University Torcuatto de Tella in Buenos Aires, Argentina; Pablo Policzer of the University of Calgary in Canada; and Michael Shifter of the Inter-American Dialogue in Washington, DC. Each looks at the potential for coups from different perspectives but, all three come to similar conclusions. That is, that despite substantial gains in democracy, the threat of coups in Latin America remains latent. The authors agree that democracy is growing in the region. Opinion surveys such as the Americas Barometer consistently show that citizens in Latin America have gradually incorporated democracy as part of their core value system. Yet, the authors argue convincingly that Latin America faces new types of interruptions to its democratic process that should be considered coups, even if not following the traditional style of military coup that predominated in the past. Situations that have taken place in Peru, Ecuador, Nicaragua, Honduras and other countries serve to illustrate the new trends. More specifically, Professor Diamint argues that in Latin America a culture of intolerance, demonization of the opposition, and the utilization of any method to achieve power prevails. In a region with a very high threshold of violence, governments fail to set an example of establishing a culture of debate, consensus, and transparency. This culture is inclined to uncontrollable political expressions, preferring confrontational means to resolve conflict. Within this scenario, “messianic” solutions are promoted and coups cannot be discarded as an option that would never transpire. Professor Policzer looks more closely to the constitutional loopholes that allow for a transformation of limited into absolute power. He argues that coups can be constitutional or unconstitutional, and that a constitutional coup can occur when violations to democracy actually stem from the constitutions themselves. In Honduras, for example specific provisions in the Constitution itself created conditions for a constitutional crisis; similar provisions have also led to constitutional authoritarianism in Venezuela and other countries. Dr. Policzer stresses that when a head of state or the military take absolute power, even temporarily, based on provisions in their constitutions; they are in essence staging a constitutional coup. These blind spots in constitutions, he argues, may be more serious threat to democracy than that of traditional coups. Lastly, Dr. Shifter argues that some kind of coup should be expected in Latin America in coming years, not only because fundamental institutions remain weak in some countries, but because the regional political environment is less prepared to respond effectively to transgressions than it was a few years ago. The good news, however, is that only a handful of countries, show no interest in governing. The bad news is that in those few countries where situations are indeed shaky, they are also in some cases aggravated by rising food and fuel prices, and spreading criminality, which pose serious risks to the rule of law and democratic governance.