A decade of silicone hydrogel development:surface properties, mechanical properties, and ocular compatibility

Since the initial launch of silicone hydrogel lenses, there has been a considerable broadening in the range of available commercial material properties. The very mobile silicon–oxygen bonds convey distinctive surface and mechanical properties on silicone hydrogels, in which advantages of enhanced oxygen permeability, reduced protein deposition, and modest frictional interaction are balanced by increased lipid and elastic response. There are now some 15 silicone hydrogel material variants available to practitioners; arguably, the changes that have taken place have been strongly influenced by feedback based on clinical experience. Water content is one of the most influential properties, and the decade has seen a progressive rise from lotrafilcon-A (24%) to efrofilcon-A (74%). Moduli have decreased over the same period from 1.4 to 0.3 MPa, but not solely as a result of changes in water content. Surface properties do not correlate directly with water content, and ingenious approaches have been used to achieve desirable improvements (e.g., greater lubricity and lower contact angle hysteresis). This is demonstrated by comparing the hysteresis value of the earliest (lotrafilcon-A, >40°) and most recent (delefilcon-A, <10°) coated silicone hydrogels. Although wettability is important, it is not of itself a good predictor of ocular response because this involves a much wider range of physicochemical and biochemical factors. The interference of the lens with ocular dynamics is complex leading separately to tissue–material interactions involving anterior and posterior lens surfaces. The biochemical consequences of these interactions may hold the key to a greater understanding of ocular incompatibility and end of day discomfort.

A road safety performance indicator for vehicle fleet compatibility

This paper discusses the development and the application of a safety performance indicator which measures the intrinsic safety of a country's vehicle fleet related to fleet composition. The indicator takes into account both the ‘relative severity’ of individual collisions between different vehicle types, and the share of those vehicle types within a country's fleet. The relative severity is a measure for the personal damage that can be expected from a collision between two vehicles of any type, relative to that of a collision between passenger cars. It is shown how this number can be calculated using vehicle mass only. A sensitivity analysis is performed to study the dependence of the indicator on parameter values and basic assumptions made. The indicator is easy to apply and satisfies the requirements for appropriate safety performance indicators. It was developed in such a way that it specifically scores the intrinsic safety of a fleet due to its composition, without being influenced by other factors, like helmet wearing. For the sake of simplicity, and since the required data is available throughout Europe, the indicator was applied to the relative share of three of the main vehicle types: passenger cars, heavy goods vehicles and motorcycles. Using the vehicle fleet data from 13 EU Member States and Norway, the indicator was used to rank the countries’ safety performance. The UK was found to perform best in terms of its fleet composition (value is 1.07), while Greece has the worst performance with the highest indicator value (1.41).

On the compatibility of benevolence and self-interest:philanthropy and entrepreneurial orientation

This article explores the philanthropy of owner–managers of small- and medium-sized enterprises (SMEs) investigating whether and why more entrepreneurially oriented SMEs are also more likely to engage in philanthropic activities. We find support for a positive link between entrepreneurial orientation (EO) and philanthropy in a representative sample of 270 Lithuanian SMEs controlling for alternative explanations. We highlight that philanthropy is relatively common among SME owner–managers and thus complement existing research which views philanthropy as sequentially following wealth generation. In line with our theorizing, further qualitative findings point to drivers of philanthropy beyond those considered in the dominant strategic-instrumental perspective. Building on social-psychological theories of motivation, we argue and confirm that philanthropy can also be an expression of owner–managers’ altruistic values; these values can be compatible and even mutually reinforcing with entrepreneurship. Our study is set in a transition economy, Lithuania, facilitating the analysis of heterogeneity in attitudes toward philanthropy.

Weak Compatibility and Common Fixed Point Theorems for A-Contractive and E-expansive Maps in Uniform Spaces

2000 Mathematics Subject Classification: 47H10, 54E15.

Symbolic Solving of Partial Differential Equation Systems and Compatibility Conditions

An algorithm is produced for the symbolic solving of systems of partial differential equations by means of multivariate Laplace–Carson transform. A system of K equations with M as the greatest order of partial derivatives and right-hand parts of a special type is considered. Initial conditions are input. As a result of a Laplace–Carson transform of the system according to initial condition we obtain an algebraic system of equations. A method to obtain compatibility conditions is discussed.

Properties of risk capital allocation methods: Core Compatibility, Equal Treatment Property and Strong Monotonicity

In finance risk capital allocation raises important questions both from theoretical and practical points of view. How to share risk of a portfolio among its subportfolios? How to reserve capital in order to hedge existing risk and how to assign this to different business units? We use an axiomatic approach to examine risk capital allocation, that is we call for fundamental properties of the methods. Our starting point is Csóka and Pintér (2011) who show by generalizing Young (1985)'s axiomatization of the Shapley value that the requirements of Core Compatibility, Equal Treatment Property and Strong Monotonicity are irreconcilable given that risk is quantified by a coherent measure of risk. In this paper we look at these requirements using analytic and simulations tools. We examine allocation methods used in practice and also ones which are theoretically interesting. Our main result is that the problem raised by Csóka and Pintér (2011) is indeed relevant in practical applications, that is it is not only a theoretical problem. We also believe that through the characterizations of the examined methods our paper can serve as a useful guide for practitioners.

Grafting compatibility among eleven chestnut cultivars and hybrids.

Among the four commercial chestnut species the C. dentata (Marsh.) Boskh. and C. sativa P. Mill. has excellent quality but more susceptible to diseases when compared to C. mollissima Blume and C. crenata Siebold & Zucc. which has inferior quality but can be used as rootstocks. This work aimed to evaluate the behavior of chestnut varieties grafted in different rootstocks under São Bento do Sapucaí, São Paulo, Brazil condition. In 1986, eleven chestnut cultivars and hybrids - Ibuki (IB), Izumo (IZ), Kinchu (KI), KM1 (KM2), KM(2) KM(2), Moriowase (MO), Okuni (OK), Taishowase (TAI), Tamatsukuri (TAM), Tiodowase (TIO) and Senri (SEN) (only graft) ? were grafted each other resulting in hundred ten combinations. Fifteen-year later grafted trees with minimum of three plants were evaluated for tree height, trunk diameter above and below graft union and graft compatibility. Randomized blocks with three replications were submitted to analysis of variance for tree height and trunk diameter. Grouping analysis using the PROC CLUSTER ? SAS system was used to describe the pattern of variance among different combinations. Seventy eight combinations in hundred ten showed perfect grafting compatibility 6 months after grafting. Forty seven combinations showed incompatibility after transplanting and the dieback rate in each combination ranged from 25 to 100%. Among seventy eight combinations established in the field twenty six had enough plants for evaluation fifteen-year later. Tree height and trunk diameter showed highly significant difference among the combinations. The highest plant (6 m) was grafted on Moriowase and Tamatsukuri which showed the highest compatibility as rootstock. The harvesting season is from November to May where MOR, IB, TAM, OK and TAI behave as early-season-cultivar and SEN the latest one.

Enhanced homogeneity and interfacial compatibility in melt-extruded cellulose nano-fibers reinforced polyethylene via surface adsorption of poly(ethylene glycol)-block-poly(ethylene) amphiphiles

In this paper, we demonstrate that an amphiphilic block copolymer such as polyethylene glycol-b-polyethylene can be used as both dispersing and interfacial compatibilizing agent for the melt compounding of LLDPE with cellulose nano-fibers. A simple and effective spray drying methodology was first used for the first time for the preparation of a powdered cellulose nano-fibers extrusion feedstock. Surface adsorption of the amphiphilic PEG-b-PE was carried out directly in solution during this process. These various dry cellulosic feedstock were subsequently combined with LLDPE via extrusion to produce a range of nano-composites. The collective outcomes of this research are several folds. Firstly we show that presence of surface adsorbed PEG-b-PE effectively hindered the aggregation of the cellulose nano-fibers during the extrusion, affording clear homogenous materials with minimum aggregation even at the highest loading of cellulose nano-fibers (∼23 vol.%). Secondly, the tailored LLDPE/cellulose interface arising from intra- and inter-molecular hydrogen and Van der Waals bonds yielded significant levels of mechanical improvements in terms of storage and tensile modulus. We believe this study provides a simple technological template to produce high quality and performant polyolefins cellulose-based nano-composites.

Protein markers of B. xylophilus Steiner & Buhrer, 1934 (Nickle, 1970) populations using quantitative proteomics and character compatibility.

The Pine Wood Nematode (PWN) Bursaphelenchus xylophilus is a severe forest pathogen in countries where it has been introduced and is considered a worldwide quarantine organism. In this study, protein markers for differentiating populations of this nematode were identified by studying differences among four selected Iberian and one American population. These populations were compared by quantitative proteomics (iTRAQ). From a total of 2860 proteins identified using the public database from the B. xylophilus genome project, 216 were unambiguous and significantly differentially regulated in the studied populations. Comparisons of their pairwise ratio were statistically treated and supported in order to convert them into discrete character states, suggesting that 141 proteins were not informative as population specific markers. Application of the Character Compatibility methodology on the remaining 75 proteins (belonging to families with different biological functions) excludes 27 which are incompatible among them. Considering only the compatible proteins, the method selects a subset of 30 specific unique protein markers which allowed the compared classification of the Iberian isolates. This approach makes it easier search for diagnostic tools and phylogenetic inference within species and populations of a pathogen exhibiting a high level of genetic diversity.

A bridging transition technique for the combination of meshfree method with finite element method in 2D solids and structures

For certain continuum problems, it is desirable and beneficial to combine two different methods together in order to exploit their advantages while evading their disadvantages. In this paper, a bridging transition algorithm is developed for the combination of the meshfree method (MM) with the finite element method (FEM). In this coupled method, the meshfree method is used in the sub-domain where the MM is required to obtain high accuracy, and the finite element method is employed in other sub-domains where FEM is required to improve the computational efficiency. The MM domain and the FEM domain are connected by a transition (bridging) region. A modified variational formulation and the Lagrange multiplier method are used to ensure the compatibility of displacements and their gradients. To improve the computational efficiency and reduce the meshing cost in the transition region, regularly distributed transition particles, which are independent of either the meshfree nodes or the FE nodes, can be inserted into the transition region. The newly developed coupled method is applied to the stress analysis of 2D solids and structures in order to investigate its’ performance and study parameters. Numerical results show that the present coupled method is convergent, accurate and stable. The coupled method has a promising potential for practical applications, because it can take advantages of both the meshfree method and FEM when overcome their shortcomings.

What’s in a handshake? Exploring business-to-business relational exchange

Despite its importance in the development of competitive advantage, attempts to unify diverse classifications of business-to-business relational exchange have been largely unsuccessful. We used 18 semi-structured, in-depth interviews with managers from a wide range of industries to explain the business-to-business relational exchange construct. Analysis of the data revealed that business-to-business relational exchange comprises five key dimensions. These are communication, compatibility, commitment, trust and power symmetry. The research highlights the importance of personal interaction in business relationships and provided additional insights into the importance of affective commitment. In addition we reveal a number of negative consequences of affective commitment, which have been previously unexplored. A new conceptual model of business-to-business relational exchange is presented, which synthesises these findings and directs future research.

EMI issues in high power and high level diode-clamped converters

Planar busbar is a good candidate to reduce interconnection inductance in high power inverters compared with cables. However, power switching components with fast switching combined with hard switched-converters produce high di/dt during turn off time and busbar stray inductance then becomes an important issue which creates overvoltage. It is necessary to keep the busbar stray inductance as low as possible to decrease overvoltage and Electromagnetic Interference (EMI) noise. In this paper, the effect of different transient current loops on busbar physical structure of the high-voltage high-level diode-clamped converters will be highlighted. Design considerations of proper planar busbar will also be presented to optimise the overall design of diode-clamped converters.

Efficient Voltage/Current Spike Reduction by Active Gate Signaling

This paper presents an Active Gate Signaling scheme to reduce voltage/current spikes across insulated gate power switches in hard switching power electronic circuits. Voltage and/or current spikes may cause EMI noise. In addition, they increase voltage/current stress on the switch. Traditionally, a higher gate resistance is chosen to reduce voltage/current spikes. Since the switching loss will increase remarkably, an active gate voltage control scheme is developed to improve efficiency of hard switching circuits while the undesirable voltage and/or current spikes are minimized.

Achieving effective supervision

Supervision probably does have benefits both for the maintenance and improvement of clinical skills and for job satisfaction, but the data are very thin and almost non-existent in the area of alcohol and other drugs ser vices. Because of the potential complexity of objectives and roles in super vision, a structured agreement appears to be an important part of the effective supervision relationship. Because sessions can degenerate easily into unstructured socialization, agendas and session objectives may also be important. While a working alliance based on mutual respect and trust is an essential base for the supervision relationship, procedures for direct observation of clinical skills, demonstration of new procedures and skills practice with detailed feedback appear critical to super vision’s impact on practice. To ensure effective supervision, there needs not only to be a minimum of personnel and resources, but also a compatibility with the values and procedures of management and staff, access to supervision training and consultation and sufficient incentives to ensure it continues.